My Quote Request
5305-00-716-8357
20 Products
AN565FC1032H10
SETSCREW
NSN, MFG P/N
5305007168357
NSN
5305-00-716-8357
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN565FC1032H10
FASTENER LENGTH: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
MATERIAL: STEEL COMP 303 OR STEEL COMP 303SE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS200
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 3 STYLE
POINT STYLE: F18 OVAL
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.094 INCHES MINIMUM AND 0.095 INCHES MAXIMUM
Related Searches:
FF-S-85
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305007168206
NSN
5305-00-716-8206
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
FASTENER LENGTH: 1.063 INCHES MINIMUM AND 1.125 INCHES MAXIMUM
HARDNESS RATING: 25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.348 INCHES MINIMUM AND 0.371 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 120000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.562 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-85
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 10P STYLE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.063 INCHES MINIMUM AND 1.125 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 12
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.798 INCHES MINIMUM AND 0.812 INCHES MAXIMUM
Related Searches:
MS90725-135
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305007168206
NSN
5305-00-716-8206
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 1.063 INCHES MINIMUM AND 1.125 INCHES MAXIMUM
HARDNESS RATING: 25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.348 INCHES MINIMUM AND 0.371 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 120000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.562 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-85
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 10P STYLE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.063 INCHES MINIMUM AND 1.125 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 12
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.798 INCHES MINIMUM AND 0.812 INCHES MAXIMUM
Related Searches:
MS90725-135
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305007168206
NSN
5305-00-716-8206
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
FASTENER LENGTH: 1.063 INCHES MINIMUM AND 1.125 INCHES MAXIMUM
HARDNESS RATING: 25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.348 INCHES MINIMUM AND 0.371 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 120000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.562 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-85
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 10P STYLE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.063 INCHES MINIMUM AND 1.125 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 12
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.798 INCHES MINIMUM AND 0.812 INCHES MAXIMUM
Related Searches:
FF-S-85
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305007168207
NSN
5305-00-716-8207
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
FASTENER LENGTH: 1.250 INCHES NOMINAL
HARDNESS RATING: 23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.348 INCHES MINIMUM AND 0.371 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 120000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 85000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.562 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-85
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 10P STYLE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 12
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.798 INCHES MINIMUM AND 0.812 INCHES MAXIMUM
Related Searches:
MS90725-136
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305007168207
NSN
5305-00-716-8207
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 1.250 INCHES NOMINAL
HARDNESS RATING: 23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.348 INCHES MINIMUM AND 0.371 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 120000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 85000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.562 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-85
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 10P STYLE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 12
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.798 INCHES MINIMUM AND 0.812 INCHES MAXIMUM
Related Searches:
MS90725-136
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305007168207
NSN
5305-00-716-8207
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
FASTENER LENGTH: 1.250 INCHES NOMINAL
HARDNESS RATING: 23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.348 INCHES MINIMUM AND 0.371 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 120000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 85000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.562 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-85
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 10P STYLE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 12
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.798 INCHES MINIMUM AND 0.812 INCHES MAXIMUM
Related Searches:
NEN5568-9-16-12UNCX1-1-41N6-8VCA
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305007168207
NSN
5305-00-716-8207
NEN5568-9-16-12UNCX1-1-41N6-8VCA
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305007168207
NSN
5305-00-716-8207
MFG
STICHTING NEDERLANDS NORMALISATIE- INSTITUUT
Description
FASTENER LENGTH: 1.250 INCHES NOMINAL
HARDNESS RATING: 23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.348 INCHES MINIMUM AND 0.371 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 120000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 85000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.562 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-85
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 10P STYLE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 12
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.798 INCHES MINIMUM AND 0.812 INCHES MAXIMUM
Related Searches:
170-515
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305007168211
NSN
5305-00-716-8211
MFG
DORMAN PRODUCTS INC
Description
FASTENER LENGTH: 1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
HARDNESS RATING: 23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.348 INCHES MINIMUM AND 0.371 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 120000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 85000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.562 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.374 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 12
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.798 INCHES MINIMUM AND 0.812 INCHES MAXIMUM
Related Searches:
803-515
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305007168211
NSN
5305-00-716-8211
MFG
DORMAN PRODUCTS INC
Description
FASTENER LENGTH: 1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
HARDNESS RATING: 23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.348 INCHES MINIMUM AND 0.371 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 120000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 85000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.562 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.374 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 12
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.798 INCHES MINIMUM AND 0.812 INCHES MAXIMUM
Related Searches:
903-515
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305007168211
NSN
5305-00-716-8211
MFG
DORMAN PRODUCTS INC
Description
FASTENER LENGTH: 1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
HARDNESS RATING: 23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.348 INCHES MINIMUM AND 0.371 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 120000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 85000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.562 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.374 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 12
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.798 INCHES MINIMUM AND 0.812 INCHES MAXIMUM
Related Searches:
MS90725-138
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305007168211
NSN
5305-00-716-8211
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
HARDNESS RATING: 23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.348 INCHES MINIMUM AND 0.371 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 120000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 85000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.562 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.374 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 12
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.798 INCHES MINIMUM AND 0.812 INCHES MAXIMUM
Related Searches:
MS90725-138
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305007168211
NSN
5305-00-716-8211
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
FASTENER LENGTH: 1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
HARDNESS RATING: 23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.348 INCHES MINIMUM AND 0.371 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 120000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 85000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.562 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.374 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 12
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.798 INCHES MINIMUM AND 0.812 INCHES MAXIMUM
Related Searches:
AN507C832-4
SCREW,MACHINE
NSN, MFG P/N
5305007168309
NSN
5305-00-716-8309
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN507C832-4
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD DIAMETER: 0.308 INCHES MINIMUM AND 0.332 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE3S
SCREW MATERIAL: STEEL COMP 430
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 COND A FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
FFS92TYPE1STYLE3S
SCREW,MACHINE
NSN, MFG P/N
5305007168309
NSN
5305-00-716-8309
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN507C832-4
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD DIAMETER: 0.308 INCHES MINIMUM AND 0.332 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE3S
SCREW MATERIAL: STEEL COMP 430
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 COND A FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
1301947-50
SCREW,MACHINE
NSN, MFG P/N
5305007168311
NSN
5305-00-716-8311
MFG
BOSCH REXROTH GMBH LOHMANN STOLTER OHT
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN508-10-4
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD DIAMETER: 0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM
HEAD HEIGHT: 0.124 INCHES MINIMUM AND 0.136 INCHES MAXIMUM
HEAD STYLE: A28 ROUND
III PRECIOUS MATERIAL AND LOCATION: OVERALL EXTERNAL SURFACE SILVER
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 88044
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: COPPER ALLOY
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: TIN OR SILVER
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.188 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
AN508-10-4
SCREW,MACHINE
NSN, MFG P/N
5305007168311
NSN
5305-00-716-8311
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN508-10-4
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD DIAMETER: 0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM
HEAD HEIGHT: 0.124 INCHES MINIMUM AND 0.136 INCHES MAXIMUM
HEAD STYLE: A28 ROUND
III PRECIOUS MATERIAL AND LOCATION: OVERALL EXTERNAL SURFACE SILVER
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 88044
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: COPPER ALLOY
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: TIN OR SILVER
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.188 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
MILS7839
SCREW,MACHINE
NSN, MFG P/N
5305007168311
NSN
5305-00-716-8311
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN508-10-4
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD DIAMETER: 0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM
HEAD HEIGHT: 0.124 INCHES MINIMUM AND 0.136 INCHES MAXIMUM
HEAD STYLE: A28 ROUND
III PRECIOUS MATERIAL AND LOCATION: OVERALL EXTERNAL SURFACE SILVER
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 88044
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: COPPER ALLOY
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: TIN OR SILVER
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.188 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
MILS7839
SCREW,MACHINE
NSN, MFG P/N
5305007168311
NSN
5305-00-716-8311
MFG
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN508-10-4
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD DIAMETER: 0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM
HEAD HEIGHT: 0.124 INCHES MINIMUM AND 0.136 INCHES MAXIMUM
HEAD STYLE: A28 ROUND
III PRECIOUS MATERIAL AND LOCATION: OVERALL EXTERNAL SURFACE SILVER
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 88044
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: COPPER ALLOY
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: TIN OR SILVER
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.188 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
AN515C6R9
SCREW,MACHINE
NSN, MFG P/N
5305007168325
NSN
5305-00-716-8325
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN515C6R9
FASTENER LENGTH: 0.562 INCHES NOMINAL
HEAD DIAMETER: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD HEIGHT: 0.103 INCHES MAXIMUM
HEAD STYLE: A28 ROUND
MANUFACTURERS CODE: 88044
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 430 OR STEEL COMP 302
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7720 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-18732 MIL SPEC 2ND MATERIAL RESPONSE OR QQ-S-763 FED SPEC 3RD MATERIAL RESPONSE OR MIL-S-7720 MIL SPEC 4TH MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.500 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC