My Quote Request
5305-00-721-5298
20 Products
170-310
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305007215298
NSN
5305-00-721-5298
MFG
DORMAN PRODUCTS INC
Description
FASTENER LENGTH: 1.000 INCHES NOMINAL
HEAD HEIGHT: 0.272 INCHES MINIMUM AND 0.291 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.438 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS85
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.000 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 14
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.612 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
Related Searches:
F990
SCREW,TAPPING
NSN, MFG P/N
5305007214782
NSN
5305-00-721-4782
MFG
TLD ACE CORPORATION
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.500 INCHES NOMINAL
HEAD DIAMETER: 0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 410 OR STEEL COMP 420 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.164 INCHES
NONMACHINE THREAD STYLE: A2 THRU SLOT (TYPE D) OR A3 DOUBLE FLUTE (TYPE F) OR A6 THRU SLOT (TYPE 6) OR A4 WIDE FLUTE (TYPE T)
SURFACE TREATMENT: PASSIVATE OVERALL
Related Searches:
MS24628-34
SCREW,TAPPING
NSN, MFG P/N
5305007214782
NSN
5305-00-721-4782
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.500 INCHES NOMINAL
HEAD DIAMETER: 0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 410 OR STEEL COMP 420 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.164 INCHES
NONMACHINE THREAD STYLE: A2 THRU SLOT (TYPE D) OR A3 DOUBLE FLUTE (TYPE F) OR A6 THRU SLOT (TYPE 6) OR A4 WIDE FLUTE (TYPE T)
SURFACE TREATMENT: PASSIVATE OVERALL
Related Searches:
MS24628-34
SCREW,TAPPING
NSN, MFG P/N
5305007214782
NSN
5305-00-721-4782
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.500 INCHES NOMINAL
HEAD DIAMETER: 0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 410 OR STEEL COMP 420 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.164 INCHES
NONMACHINE THREAD STYLE: A2 THRU SLOT (TYPE D) OR A3 DOUBLE FLUTE (TYPE F) OR A6 THRU SLOT (TYPE 6) OR A4 WIDE FLUTE (TYPE T)
SURFACE TREATMENT: PASSIVATE OVERALL
Related Searches:
8628777
SCREW,MACHINE
NSN, MFG P/N
5305007214787
NSN
5305-00-721-4787
MFG
U S ARMY ARMAMENT RESEARCH & DEVELOPMENT COMMAND
Description
FASTENER LENGTH: 0.344 INCHES NOMINAL
HEAD DIAMETER: 0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.072 INCHES MINIMUM AND 0.082 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: STEEL
SCREW SURFACE TREATMENT: COPPER OR TIN
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.344 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
G302036-309
SCREW,MACHINE
NSN, MFG P/N
5305007214787
NSN
5305-00-721-4787
MFG
KEYSTONE BOLT AND NUT CORP
Description
FASTENER LENGTH: 0.344 INCHES NOMINAL
HEAD DIAMETER: 0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.072 INCHES MINIMUM AND 0.082 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: STEEL
SCREW SURFACE TREATMENT: COPPER OR TIN
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.344 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
AN565AC2H4
SETSCREW
NSN, MFG P/N
5305007214841
NSN
5305-00-721-4841
MFG
BOSCH REXROTH GMBH LOHMANN STOLTER OHT
Description
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER: 0.086 INCHES
POINT STYLE: F19 FLAT
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.035 INCHES NOMINAL
Related Searches:
MS51029-3
SETSCREW
NSN, MFG P/N
5305007214841
NSN
5305-00-721-4841
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER: 0.086 INCHES
POINT STYLE: F19 FLAT
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.035 INCHES NOMINAL
Related Searches:
MS51029-3
SETSCREW
NSN, MFG P/N
5305007214841
NSN
5305-00-721-4841
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER: 0.086 INCHES
POINT STYLE: F19 FLAT
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.035 INCHES NOMINAL
Related Searches:
MS51030-3
SETSCREW
NSN, MFG P/N
5305007214841
NSN
5305-00-721-4841
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER: 0.086 INCHES
POINT STYLE: F19 FLAT
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.035 INCHES NOMINAL
Related Searches:
S6135-20029-3
SETSCREW
NSN, MFG P/N
5305007215024
NSN
5305-00-721-5024
MFG
SIKORSKY AIRCRAFT CORPORATION
Description
DESIGN CONTROL REFERENCE: S6135-20029-3
FASTENER LENGTH: 0.812 INCHES NOMINAL
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.406 INCHES NOMINAL
HEAD HEIGHT: 0.172 INCHES NOMINAL
HEAD STYLE: C44 FILLISTER
INTERNAL DRIVE STYLE: D14 SLOT
MANUFACTURERS CODE: 78286
MATERIAL: STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4130 OR STEEL COMP 4037 OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
POINT CHAMFER ANGLE: 45.0 DEGREES NOMINAL
POINT DIAMETER: 0.156 INCHES NOMINAL
POINT LENGTH: 0.312 INCHES NOMINAL
POINT STYLE: F5 CHAMFER DOG
SURFACE TREATMENT: CADMIUM OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.500 INCHES MINIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
61-30305-0624
SCREW,MACHINE
NSN, MFG P/N
5305007215025
NSN
5305-00-721-5025
MFG
KOLLSMAN INC.
Description
DESIGN CONTROL REFERENCE: 61-30305-0624
FASTENER LENGTH: 0.375 INCHES NOMINAL
HEAD DIAMETER: 0.245 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD HEIGHT: 0.091 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
HEAD STYLE: A28 ROUND
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 89944
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: STEEL COMP 303
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
FFS92ANDTYPE3ANDSTYLE1
SCREW,MACHINE
NSN, MFG P/N
5305007215168
NSN
5305-00-721-5168
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
DESIGN CONTROL REFERENCE: N81P13018C13
FASTENER LENGTH: 1.125 INCHES NOMINAL
HEAD DIAMETER: 0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 24446
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: COPPER ALLOY
SCREW SURFACE TREATMENT: CADMIUM
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.125 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
N81P13018C13
SCREW,MACHINE
NSN, MFG P/N
5305007215168
NSN
5305-00-721-5168
MFG
GENERAL ELECTRIC CO
Description
DESIGN CONTROL REFERENCE: N81P13018C13
FASTENER LENGTH: 1.125 INCHES NOMINAL
HEAD DIAMETER: 0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 24446
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: COPPER ALLOY
SCREW SURFACE TREATMENT: CADMIUM
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.125 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
N81P13009C13
SCREW,MACHINE
NSN, MFG P/N
5305007215180
NSN
5305-00-721-5180
MFG
GENERAL ELECTRIC CO
Description
DESIGN CONTROL REFERENCE: N81P13009C13
FASTENER LENGTH: 0.562 INCHES NOMINAL
HEAD DIAMETER: 0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 24446
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: COPPER ALLOY
SCREW SURFACE TREATMENT: CADMIUM
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.562 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
N81P13009C13
SCREW,MACHINE
NSN, MFG P/N
5305007215180
NSN
5305-00-721-5180
MFG
GENERAL ELECTRIC CO
Description
DESIGN CONTROL REFERENCE: N81P13009C13
FASTENER LENGTH: 0.562 INCHES NOMINAL
HEAD DIAMETER: 0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 24446
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: COPPER ALLOY
SCREW SURFACE TREATMENT: CADMIUM
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.562 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
N81P13022C13
SCREW,MACHINE
NSN, MFG P/N
5305007215183
NSN
5305-00-721-5183
MFG
GENERAL ELECTRIC CO
Description
DESIGN CONTROL REFERENCE: N81P13022C13
FASTENER LENGTH: 1.375 INCHES NOMINAL
HEAD DIAMETER: 0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 24446
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: COPPER ALLOY
SCREW SURFACE TREATMENT: CADMIUM
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.375 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
3176210-A-131
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305007215298
NSN
5305-00-721-5298
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
FASTENER LENGTH: 1.000 INCHES NOMINAL
HEAD HEIGHT: 0.272 INCHES MINIMUM AND 0.291 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.438 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS85
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.000 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 14
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.612 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
Related Searches:
FFS85
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305007215298
NSN
5305-00-721-5298
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
FASTENER LENGTH: 1.000 INCHES NOMINAL
HEAD HEIGHT: 0.272 INCHES MINIMUM AND 0.291 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.438 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS85
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.000 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 14
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.612 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
Related Searches:
MS35307-385
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305007215298
NSN
5305-00-721-5298
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 1.000 INCHES NOMINAL
HEAD HEIGHT: 0.272 INCHES MINIMUM AND 0.291 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.438 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS85
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.000 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 14
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.612 INCHES MINIMUM AND 0.625 INCHES MAXIMUM