My Quote Request
5305-00-722-4780
20 Products
AN535-2-2
SCREW,DRIVE
NSN, MFG P/N
5305007224780
NSN
5305-00-722-4780
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
FASTENER LENGTH: 0.109 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
FEATURES PROVIDED: CASEHARDENED
HEAD DIAMETER: 0.146 INCHES MINIMUM AND 0.162 INCHES MAXIMUM
HEAD HEIGHT: 0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM
HEAD STYLE: C37 ROUND
MANUFACTURERS CODE: 88044
MATERIAL: STEEL OVERALL
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN535-2-2
NONMACHINE THREAD STYLE: A16 DRIVE SCREW (TYPE U)
PILOT DIAMETER: 0.080 INCHES MINIMUM AND 0.083 INCHES MAXIMUM
PILOT LENGTH: 0.015 INCHES MINIMUM AND 0.031 INCHES MAXIMUM
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Related Searches:
MS35492-58
SCREW,WOOD
NSN, MFG P/N
5305007224632
NSN
5305-00-722-4632
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.937 INCHES MINIMUM AND 2.000 INCHES MAXIMUM
HEAD DIAMETER: 0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.164 INCHES
NONMACHINE THREAD STYLE: A15 WOOD SCREW (TYPE WD)
SPECIAL FEATURES: FLEET BALLISTIC MISSILE QUALITY AS IDENTIFIED BY QUALITY CONTROL NO.POS3912884
SURFACE TREATMENT: ZINC OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM-B633 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
Related Searches:
MS35492-SZ8-X-2IN.LG.
SCREW,WOOD
NSN, MFG P/N
5305007224632
NSN
5305-00-722-4632
MFG
GENERAL SERVICES ADMINISTRATION FEDERAL SUPPLY SERVICE
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.937 INCHES MINIMUM AND 2.000 INCHES MAXIMUM
HEAD DIAMETER: 0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.164 INCHES
NONMACHINE THREAD STYLE: A15 WOOD SCREW (TYPE WD)
SPECIAL FEATURES: FLEET BALLISTIC MISSILE QUALITY AS IDENTIFIED BY QUALITY CONTROL NO.POS3912884
SURFACE TREATMENT: ZINC OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM-B633 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
Related Searches:
FFS103TYPE3STYLE4
SETSCREW
NSN, MFG P/N
5305007224665
NSN
5305-00-722-4665
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
FASTENER LENGTH: 0.375 INCHES NOMINAL
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL COMP 4037 OR STEEL COMP 4137 OR STEEL COMP 4140 OR STEEL COMP 8630 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER: 0.125 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS103TYPE3STYLE4
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 4 STYLE
POINT STYLE: F20 CUP
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.375 INCHES MINIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.062 INCHES MINIMUM AND 0.064 INCHES MAXIMUM
Related Searches:
N81P15004C6
SCREW,MACHINE
NSN, MFG P/N
5305007224694
NSN
5305-00-722-4694
MFG
LOCKHEED MARTIN CORPORATION DBA MS2 DIV MS2 RADAR SYSTEMS
Description
DESIGN CONTROL REFERENCE: N81P15004C6
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD DIAMETER: 0.306 INCHES NOMINAL
HEAD HEIGHT: 0.127 INCHES NOMINAL
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 03538
NOMINAL THREAD DIAMETER: 0.164 INCHES
SCREW MATERIAL: COPPER ALLOY
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
N81P15004C6
SCREW,MACHINE
NSN, MFG P/N
5305007224694
NSN
5305-00-722-4694
MFG
GENERAL ELECTRIC CO
Description
DESIGN CONTROL REFERENCE: N81P15004C6
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD DIAMETER: 0.306 INCHES NOMINAL
HEAD HEIGHT: 0.127 INCHES NOMINAL
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 03538
NOMINAL THREAD DIAMETER: 0.164 INCHES
SCREW MATERIAL: COPPER ALLOY
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
N81P15004Q90
SCREW,MACHINE
NSN, MFG P/N
5305007224694
NSN
5305-00-722-4694
MFG
GENERAL ELECTRIC CO
Description
DESIGN CONTROL REFERENCE: N81P15004C6
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD DIAMETER: 0.306 INCHES NOMINAL
HEAD HEIGHT: 0.127 INCHES NOMINAL
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 03538
NOMINAL THREAD DIAMETER: 0.164 INCHES
SCREW MATERIAL: COPPER ALLOY
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
N81P15004Q90
SCREW,MACHINE
NSN, MFG P/N
5305007224694
NSN
5305-00-722-4694
MFG
CANADIAN GENERAL ELECTRIC CO LTD COMPOSITE MATERIALS
Description
DESIGN CONTROL REFERENCE: N81P15004C6
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD DIAMETER: 0.306 INCHES NOMINAL
HEAD HEIGHT: 0.127 INCHES NOMINAL
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 03538
NOMINAL THREAD DIAMETER: 0.164 INCHES
SCREW MATERIAL: COPPER ALLOY
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
FFS92TYPE1STYLE5S
SCREW,MACHINE
NSN, MFG P/N
5305007224709
NSN
5305-00-722-4709
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35266-82
FASTENER LENGTH: 0.875 INCHES NOMINAL
HEAD DIAMETER: 0.389 INCHES MINIMUM AND 0.414 INCHES MAXIMUM
HEAD HEIGHT: 0.161 INCHES MINIMUM AND 0.170 INCHES MAXIMUM
HEAD HOLE CONFIGURATION STYLE: C8 ROUND
HEAD STYLE: A33 FILLISTER
HOLE DIAMETER: 0.062 INCHES NOMINAL
HOLE QUANTITY: 1
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE5S
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.804 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
MS35266-82
SCREW,MACHINE
NSN, MFG P/N
5305007224709
NSN
5305-00-722-4709
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35266-82
FASTENER LENGTH: 0.875 INCHES NOMINAL
HEAD DIAMETER: 0.389 INCHES MINIMUM AND 0.414 INCHES MAXIMUM
HEAD HEIGHT: 0.161 INCHES MINIMUM AND 0.170 INCHES MAXIMUM
HEAD HOLE CONFIGURATION STYLE: C8 ROUND
HEAD STYLE: A33 FILLISTER
HOLE DIAMETER: 0.062 INCHES NOMINAL
HOLE QUANTITY: 1
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE5S
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.804 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
AN501-416-20
SCREW,MACHINE
NSN, MFG P/N
5305007224710
NSN
5305-00-722-4710
MFG
AIR FORCE-NAVY AERONAUTICAL SPECIFICATIONS PROMULGATED BY AERONAUTICAL STANDARDS GROUP
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35266-84
FASTENER LENGTH: 1.250 INCHES NOMINAL
HEAD DIAMETER: 0.389 INCHES MINIMUM AND 0.414 INCHES MAXIMUM
HEAD HEIGHT: 0.161 INCHES MINIMUM AND 0.170 INCHES MAXIMUM
HEAD HOLE CONFIGURATION STYLE: C8 ROUND
HEAD STYLE: A33 FILLISTER
HOLE DIAMETER: 0.062 INCHES NOMINAL
HOLE QUANTITY: 1
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE5S
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.179 INCHES MINIMUM AND 1.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
FFS92TYPE1STYLE5S
SCREW,MACHINE
NSN, MFG P/N
5305007224710
NSN
5305-00-722-4710
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35266-84
FASTENER LENGTH: 1.250 INCHES NOMINAL
HEAD DIAMETER: 0.389 INCHES MINIMUM AND 0.414 INCHES MAXIMUM
HEAD HEIGHT: 0.161 INCHES MINIMUM AND 0.170 INCHES MAXIMUM
HEAD HOLE CONFIGURATION STYLE: C8 ROUND
HEAD STYLE: A33 FILLISTER
HOLE DIAMETER: 0.062 INCHES NOMINAL
HOLE QUANTITY: 1
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE5S
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.179 INCHES MINIMUM AND 1.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
MS35266-84
SCREW,MACHINE
NSN, MFG P/N
5305007224710
NSN
5305-00-722-4710
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35266-84
FASTENER LENGTH: 1.250 INCHES NOMINAL
HEAD DIAMETER: 0.389 INCHES MINIMUM AND 0.414 INCHES MAXIMUM
HEAD HEIGHT: 0.161 INCHES MINIMUM AND 0.170 INCHES MAXIMUM
HEAD HOLE CONFIGURATION STYLE: C8 ROUND
HEAD STYLE: A33 FILLISTER
HOLE DIAMETER: 0.062 INCHES NOMINAL
HOLE QUANTITY: 1
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE5S
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.179 INCHES MINIMUM AND 1.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
AN515-8R20
SCREW,MACHINE
NSN, MFG P/N
5305007224713
NSN
5305-00-722-4713
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN515-8R20
FASTENER LENGTH: 1.250 INCHES NOMINAL
HEAD DIAMETER: 0.287 INCHES MINIMUM AND 0.309 INCHES MAXIMUM
HEAD HEIGHT: 0.120 INCHES NOMINAL
HEAD STYLE: A28 ROUND
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE3STYLE1C
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 1C STYLE
SCREW MATERIAL: STEEL
SCREW SURFACE TREATMENT: CADMIUM
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.250 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
FFS92TYPE3STYLE1C
SCREW,MACHINE
NSN, MFG P/N
5305007224713
NSN
5305-00-722-4713
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN515-8R20
FASTENER LENGTH: 1.250 INCHES NOMINAL
HEAD DIAMETER: 0.287 INCHES MINIMUM AND 0.309 INCHES MAXIMUM
HEAD HEIGHT: 0.120 INCHES NOMINAL
HEAD STYLE: A28 ROUND
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE3STYLE1C
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 1C STYLE
SCREW MATERIAL: STEEL
SCREW SURFACE TREATMENT: CADMIUM
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.250 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
SMC208869-57
SCREW,MACHINE
NSN, MFG P/N
5305007224713
NSN
5305-00-722-4713
MFG
US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN515-8R20
FASTENER LENGTH: 1.250 INCHES NOMINAL
HEAD DIAMETER: 0.287 INCHES MINIMUM AND 0.309 INCHES MAXIMUM
HEAD HEIGHT: 0.120 INCHES NOMINAL
HEAD STYLE: A28 ROUND
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE3STYLE1C
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 1C STYLE
SCREW MATERIAL: STEEL
SCREW SURFACE TREATMENT: CADMIUM
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.250 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
AN565D428H12
SETSCREW
NSN, MFG P/N
5305007224763
NSN
5305-00-722-4763
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
FASTENER LENGTH: 0.750 INCHES NOMINAL
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 88044
MATERIAL: STEEL COMP 4037 OR STEEL COMP 4137 OR STEEL COMP 4140 OR STEEL COMP 8630 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN565D428H12
POINT STYLE: F20 CUP
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.125 INCHES MINIMUM AND 0.127 INCHES MAXIMUM
Related Searches:
1437561-23
SETSCREW
NSN, MFG P/N
5305007224765
NSN
5305-00-722-4765
MFG
BOSCH REXROTH GMBH LOHMANN STOLTER OHT
Description
FASTENER LENGTH: 0.125 INCHES NOMINAL
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 88044
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN565D8H2
POINT STYLE: F20 CUP
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: FLEET BALLISTIC MISSILE QUALITY AS IDENTIFIED BY QUALITY CONTROL NO. POSO 912952
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.125 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.078 INCHES MINIMUM AND 0.079 INCHES MAXIMUM
Related Searches:
AN565D8H2
SETSCREW
NSN, MFG P/N
5305007224765
NSN
5305-00-722-4765
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
FASTENER LENGTH: 0.125 INCHES NOMINAL
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 88044
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN565D8H2
POINT STYLE: F20 CUP
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: FLEET BALLISTIC MISSILE QUALITY AS IDENTIFIED BY QUALITY CONTROL NO. POSO 912952
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.125 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.078 INCHES MINIMUM AND 0.079 INCHES MAXIMUM
Related Searches:
AN565D1032H8
SETSCREW
NSN, MFG P/N
5305007224766
NSN
5305-00-722-4766
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
DEPARTURE FROM CITED DESIGNATOR: AS MODIFIED BY SPECIAL FEATURES
FASTENER LENGTH: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 88044
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN565D1032H8
POINT STYLE: F20 CUP
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: FLEET BALLISTIC MISSILE QUALITY AS IDENTIFIED BY QUALITY CONTROL NO. POSO912951
THREAD CLASS: 3A
THREAD LENGTH: 0.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.093 INCHES MINIMUM AND 0.094 INCHES MAXIMUM