My Quote Request
5305-00-803-1545
20 Products
3030-0007
SETSCREW
NSN, MFG P/N
5305008031545
NSN
5305-00-803-1545
MFG
AGILENT TECHNOLOGIES INC. DBA NORTH AMERICAN CONTACT CENTER DIV AGILENT BUSINESS CENTER
Description
SETSCREW
Related Searches:
3030-0007
SETSCREW
NSN, MFG P/N
5305008031545
NSN
5305-00-803-1545
MFG
HEWLETT PACKARD CO
Description
SETSCREW
Related Searches:
52A13D12-19
SCREW,ASSEMBLED WASHER
NSN, MFG P/N
5305008031721
NSN
5305-00-803-1721
MFG
KADON CORP
Description
DESIGN CONTROL REFERENCE: 52A13D12-19
FASTENER LENGTH: 0.500 INCHES NOMINAL
HEAD DIAMETER: 0.359 INCHES NOMINAL
HEAD HEIGHT: 0.137 INCHES NOMINAL
HEAD STYLE: C37 ROUND
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 07912
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
PRIMARY WASHER MATERIAL THICKNESS: 0.022 INCHES NOMINAL
PRIMARY WASHER OUTSIDE DIAMETER: 0.288 INCHES NOMINAL
PRIMARY WASHER STYLE: G2 FLAT INTERNAL TEETH
SURFACE TREATMENT: CADMIUM OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.375 INCHES MINIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
WASHER QUANTITY: 1
Related Searches:
D4331-3517
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305008031733
NSN
5305-00-803-1733
MFG
TRANE U.S. INC. DBA TRANE DIV TRANE HEADQUARTERS
Description
FASTENER LENGTH: 1.500 INCHES NOMINAL
HEAD HEIGHT: 0.281 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.500 INCHES
SURFACE TREATMENT: ZINC OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-Z-325,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.375 INCHES MINIMUM
THREAD QUANTITY PER INCH: 13
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.750 INCHES NOMINAL
Related Searches:
SCR01697
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305008031733
NSN
5305-00-803-1733
MFG
TRANE U.S. INC. DBA TRANE DIV TRANE HEADQUARTERS
Description
FASTENER LENGTH: 1.500 INCHES NOMINAL
HEAD HEIGHT: 0.281 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.500 INCHES
SURFACE TREATMENT: ZINC OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-Z-325,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.375 INCHES MINIMUM
THREAD QUANTITY PER INCH: 13
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.750 INCHES NOMINAL
Related Searches:
SCR2
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305008031733
NSN
5305-00-803-1733
MFG
TRANE U.S. INC. DBA TRANE DIV TRANE HEADQUARTERS
Description
FASTENER LENGTH: 1.500 INCHES NOMINAL
HEAD HEIGHT: 0.281 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.500 INCHES
SURFACE TREATMENT: ZINC OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-Z-325,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.375 INCHES MINIMUM
THREAD QUANTITY PER INCH: 13
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.750 INCHES NOMINAL
Related Searches:
NAS585-34
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305008031759
NSN
5305-00-803-1759
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 2.640 INCHES MINIMUM AND 2.687 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 2.125 INCHES NOMINAL
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.629 INCHES MINIMUM AND 0.633 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OR STEEL COMP 4130 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5400 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 6TH
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS585 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.531 INCHES MINIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
~1: MATERIAL RESPONSE OVERALL
Related Searches:
MILB7838
SCREW,MACHINE
NSN, MFG P/N
5305008032470
NSN
5305-00-803-2470
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 1.073 INCHES MINIMUM AND 1.103 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.251 INCHES MINIMUM AND 0.363 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
MILB7838
SCREW,MACHINE
NSN, MFG P/N
5305008032470
NSN
5305-00-803-2470
MFG
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
FASTENER LENGTH: 1.073 INCHES MINIMUM AND 1.103 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.251 INCHES MINIMUM AND 0.363 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
NAS1403-12
SCREW,MACHINE
NSN, MFG P/N
5305008032470
NSN
5305-00-803-2470
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 1.073 INCHES MINIMUM AND 1.103 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.251 INCHES MINIMUM AND 0.363 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
NAS1403-13
SCREW,MACHINE
NSN, MFG P/N
5305008032471
NSN
5305-00-803-2471
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 1.150 INCHES NOMINAL
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 5TH MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SPECIFICATION/STANDARD DATA: 80205-NAS1403 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.338 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
FFS92
SCREW,MACHINE
NSN, MFG P/N
5305008032487
NSN
5305-00-803-2487
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.313 INCHES NOMINAL
HEAD DIAMETER: 0.257 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
NOMINAL THREAD DIAMETER: 0.138 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35247-34
SCREW MATERIAL: COPPER ALLOY
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-321 FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-611-CANCELED FED SPEC 2ND MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE AND ENAMEL
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
MS35247-34
SCREW,MACHINE
NSN, MFG P/N
5305008032487
NSN
5305-00-803-2487
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.313 INCHES NOMINAL
HEAD DIAMETER: 0.257 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
NOMINAL THREAD DIAMETER: 0.138 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35247-34
SCREW MATERIAL: COPPER ALLOY
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-321 FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-611-CANCELED FED SPEC 2ND MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE AND ENAMEL
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
999686-12
SCREW,MACHINE
NSN, MFG P/N
5305008032502
NSN
5305-00-803-2502
MFG
RAYTHEON COMPANY
Description
FASTENER LENGTH: 0.750 INCHES NOMINAL
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.265 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.088 INCHES MINIMUM AND 0.102 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B5 TORQUE SET
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
SCREW MATERIAL: STEEL COMP 4037
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6300 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
CTR900-08-12
SCREW,MACHINE
NSN, MFG P/N
5305008032502
NSN
5305-00-803-2502
MFG
TEXTRON FASTENING SYSTEMS DBA DECORAH OPERATIONS TFS
Description
FASTENER LENGTH: 0.750 INCHES NOMINAL
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.265 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.088 INCHES MINIMUM AND 0.102 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B5 TORQUE SET
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
SCREW MATERIAL: STEEL COMP 4037
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6300 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
TS705-08-12CR
SCREW,MACHINE
NSN, MFG P/N
5305008032502
NSN
5305-00-803-2502
MFG
AIR PRODUCTS AND CHEMICALS INC. DBA AIR PRODUCTS
Description
FASTENER LENGTH: 0.750 INCHES NOMINAL
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.265 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.088 INCHES MINIMUM AND 0.102 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B5 TORQUE SET
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
SCREW MATERIAL: STEEL COMP 4037
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6300 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
155242
SCREW,SHOULDER
NSN, MFG P/N
5305008032516
NSN
5305-00-803-2516
MFG
RAYTHEON COMPANY
Description
DESIGN CONTROL REFERENCE: 155242
FASTENER LENGTH: 0.443 INCHES NOMINAL
HEAD DIAMETER: 0.323 INCHES MINIMUM AND 0.333 INCHES MAXIMUM
HEAD HEIGHT: 0.062 INCHES NOMINAL
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D14 SLOT
MANUFACTURERS CODE: 82577
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6783,COND F MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHOULDER DIAMETER: 0.2460 INCHES MINIMUM AND 0.2465 INCHES MAXIMUM FIRST SHOULDER
SHOULDER LENGTH: 0.219 INCHES MINIMUM AND 0.222 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPE: ROUND FIRST SHOULDER
SURFACE TREATMENT: CADMIUM OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.219 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
10068360-1
SCREW,SHOULDER
NSN, MFG P/N
5305008032611
NSN
5305-00-803-2611
MFG
U S ARMY AVIATION AND MISSILE COMMAND
Description
DESIGN CONTROL REFERENCE: 9-0412-56
FASTENER LENGTH: 1.875 INCHES NOMINAL
HEAD DIAMETER: 0.375 INCHES NOMINAL
HEAD HEIGHT: 0.188 INCHES NOMINAL
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 15840
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHOULDER DIAMETER: 0.250 INCHES NOMINAL FIRST SHOULDER
SHOULDER LENGTH: 1.500 INCHES NOMINAL FIRST SHOULDER
SHOULDER SHAPE: ROUND FIRST SHOULDER
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.375 INCHES MINIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.156 INCHES NOMINAL
Related Searches:
9-0412-56
SCREW,SHOULDER
NSN, MFG P/N
5305008032611
NSN
5305-00-803-2611
MFG
DANLY MACHINE CORP
Description
DESIGN CONTROL REFERENCE: 9-0412-56
FASTENER LENGTH: 1.875 INCHES NOMINAL
HEAD DIAMETER: 0.375 INCHES NOMINAL
HEAD HEIGHT: 0.188 INCHES NOMINAL
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 15840
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHOULDER DIAMETER: 0.250 INCHES NOMINAL FIRST SHOULDER
SHOULDER LENGTH: 1.500 INCHES NOMINAL FIRST SHOULDER
SHOULDER SHAPE: ROUND FIRST SHOULDER
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.375 INCHES MINIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.156 INCHES NOMINAL
Related Searches:
2256624PC1
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305008033104
NSN
5305-00-803-3104
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DESIGN CONTROL REFERENCE: M32CR632-5
FASTENER LENGTH: 0.312 INCHES NOMINAL
HEAD DIAMETER: 0.247 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D14 SLOT
LOCKING FEATURE: PATCH OR STRIP THREADS
MANUFACTURERS CODE: 26233
MATERIAL: STEEL CORROSION RESISTING OVERALL
NOMINAL THREAD DIAMETER: 0.138 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.229 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC