My Quote Request
5305-00-832-7717
20 Products
2289917
SCREW THROTTLE BODY
NSN, MFG P/N
5305008327717
NSN
5305-00-832-7717
MFG
MILITARY VEHICLES OPN GENERAL MOTORS TRUCK AND BUS GROUP MS 2603-02
Description
SCREW THROTTLE BODY
Related Searches:
104-34-2
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305008326777
NSN
5305-00-832-6777
104-34-2
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305008326777
NSN
5305-00-832-6777
MFG
BOSCH REXROTH GMBH LOHMANN STOLTER OHT
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 1.047 INCHES MINIMUM AND 1.078 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD: 0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
HEAD DIAMETER: 0.433 INCHES MINIMUM AND 0.443 INCHES MAXIMUM
HEAD HEIGHT: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
HEAD STYLE: C66 KNURLED NO. 1
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPECIAL FEATURES: CONE POINT 82 DEG
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072 FINISH NO. E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
167578-1
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305008326777
NSN
5305-00-832-6777
167578-1
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305008326777
NSN
5305-00-832-6777
MFG
BOSCH REXROTH GMBH LOHMANN STOLTER OHT
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 1.047 INCHES MINIMUM AND 1.078 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD: 0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
HEAD DIAMETER: 0.433 INCHES MINIMUM AND 0.443 INCHES MAXIMUM
HEAD HEIGHT: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
HEAD STYLE: C66 KNURLED NO. 1
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPECIAL FEATURES: CONE POINT 82 DEG
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072 FINISH NO. E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
2490564-1
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305008326777
NSN
5305-00-832-6777
2490564-1
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305008326777
NSN
5305-00-832-6777
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 1.047 INCHES MINIMUM AND 1.078 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD: 0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
HEAD DIAMETER: 0.433 INCHES MINIMUM AND 0.443 INCHES MAXIMUM
HEAD HEIGHT: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
HEAD STYLE: C66 KNURLED NO. 1
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPECIAL FEATURES: CONE POINT 82 DEG
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072 FINISH NO. E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
3020350-003
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305008326777
NSN
5305-00-832-6777
3020350-003
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305008326777
NSN
5305-00-832-6777
MFG
BOSCH REXROTH GMBH LOHMANN STOLTER OHT
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 1.047 INCHES MINIMUM AND 1.078 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD: 0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
HEAD DIAMETER: 0.433 INCHES MINIMUM AND 0.443 INCHES MAXIMUM
HEAD HEIGHT: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
HEAD STYLE: C66 KNURLED NO. 1
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPECIAL FEATURES: CONE POINT 82 DEG
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072 FINISH NO. E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
4001408-3
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305008326777
NSN
5305-00-832-6777
4001408-3
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305008326777
NSN
5305-00-832-6777
MFG
BOSCH REXROTH GMBH LOHMANN STOLTER OHT
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 1.047 INCHES MINIMUM AND 1.078 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD: 0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
HEAD DIAMETER: 0.433 INCHES MINIMUM AND 0.443 INCHES MAXIMUM
HEAD HEIGHT: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
HEAD STYLE: C66 KNURLED NO. 1
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPECIAL FEATURES: CONE POINT 82 DEG
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072 FINISH NO. E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
6142-SS-1032-7
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305008326777
NSN
5305-00-832-6777
6142-SS-1032-7
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305008326777
NSN
5305-00-832-6777
MFG
BOSCH REXROTH GMBH LOHMANN STOLTER OHT
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 1.047 INCHES MINIMUM AND 1.078 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD: 0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
HEAD DIAMETER: 0.433 INCHES MINIMUM AND 0.443 INCHES MAXIMUM
HEAD HEIGHT: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
HEAD STYLE: C66 KNURLED NO. 1
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPECIAL FEATURES: CONE POINT 82 DEG
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072 FINISH NO. E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
6142SS1032
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305008326777
NSN
5305-00-832-6777
6142SS1032
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305008326777
NSN
5305-00-832-6777
MFG
CAREY MANUFACTURING COMPANY INC. DBA AMATOM ELECTRONIC HARDWARES USE CAGE CODE 5W748 FOR CATALOGING.
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 1.047 INCHES MINIMUM AND 1.078 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD: 0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
HEAD DIAMETER: 0.433 INCHES MINIMUM AND 0.443 INCHES MAXIMUM
HEAD HEIGHT: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
HEAD STYLE: C66 KNURLED NO. 1
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPECIAL FEATURES: CONE POINT 82 DEG
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072 FINISH NO. E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
6142SS1032
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305008326777
NSN
5305-00-832-6777
6142SS1032
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305008326777
NSN
5305-00-832-6777
MFG
NEW HAVEN MFG CORP AMATOM ELECTRONIC HARDWARE DIV
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 1.047 INCHES MINIMUM AND 1.078 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD: 0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
HEAD DIAMETER: 0.433 INCHES MINIMUM AND 0.443 INCHES MAXIMUM
HEAD HEIGHT: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
HEAD STYLE: C66 KNURLED NO. 1
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPECIAL FEATURES: CONE POINT 82 DEG
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072 FINISH NO. E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
6142SS1032-7
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305008326777
NSN
5305-00-832-6777
6142SS1032-7
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305008326777
NSN
5305-00-832-6777
MFG
CAREY MANUFACTURING COMPANY INC. DBA AMATOM ELECTRONIC HARDWARES USE CAGE CODE 5W748 FOR CATALOGING.
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 1.047 INCHES MINIMUM AND 1.078 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD: 0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
HEAD DIAMETER: 0.433 INCHES MINIMUM AND 0.443 INCHES MAXIMUM
HEAD HEIGHT: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
HEAD STYLE: C66 KNURLED NO. 1
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPECIAL FEATURES: CONE POINT 82 DEG
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072 FINISH NO. E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
6142SS1032-7
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305008326777
NSN
5305-00-832-6777
6142SS1032-7
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305008326777
NSN
5305-00-832-6777
MFG
NEW HAVEN MFG CORP AMATOM ELECTRONIC HARDWARE DIV
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 1.047 INCHES MINIMUM AND 1.078 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD: 0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
HEAD DIAMETER: 0.433 INCHES MINIMUM AND 0.443 INCHES MAXIMUM
HEAD HEIGHT: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
HEAD STYLE: C66 KNURLED NO. 1
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPECIAL FEATURES: CONE POINT 82 DEG
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072 FINISH NO. E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
SC5305-0010-3
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305008326777
NSN
5305-00-832-6777
SC5305-0010-3
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305008326777
NSN
5305-00-832-6777
MFG
DRS ICAS, LLC
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 1.047 INCHES MINIMUM AND 1.078 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD: 0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
HEAD DIAMETER: 0.433 INCHES MINIMUM AND 0.443 INCHES MAXIMUM
HEAD HEIGHT: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
HEAD STYLE: C66 KNURLED NO. 1
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPECIAL FEATURES: CONE POINT 82 DEG
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072 FINISH NO. E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
442-44
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305008326779
NSN
5305-00-832-6779
MFG
GOODRICH CORPORATION DBA GOODRICH PUMP ENG CTRL SYSTEMS DIV GOODRICH PUMP& ENGINE CONTROL SYSTEMS INC.
Description
DESIGN CONTROL REFERENCE: 442-44
FASTENER LENGTH: 0.625 INCHES NOMINAL
HEAD DIAMETER: 0.303 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
HEAD HEIGHT: 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
HEAD STYLE: C66 KNURLED NO. 1
HOLE CONFIGURATION STYLE: E12 ROUND LONGITUDINAL HOLE
HOLE DIAMETER: 0.045 INCHES NOMINAL
HOLE QUANTITY: 2
HOLE TYPE: DRILLED
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 11599
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OVERALL
MINIMUM TENSILE STRENGTH: 750000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPECIAL FEATURES: COLOR BLUE FED STD 595 NO. 15123
SURFACE TREATMENT: PAINT OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.625 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJC
WIDTH ACROSS FLATS: 0.156 INCHES NOMINAL
Related Searches:
233998
SETSCREW
NSN, MFG P/N
5305008327705
NSN
5305-00-832-7705
MFG
BENDIX COMMERCIAL VEHICLE SYSTEMS LLC
Description
FASTENER LENGTH: 0.188 INCHES NOMINAL
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 4140 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
NONSTANDARD THREAD PITCH DIAMETER: 0.1605 TO 0.1629 INCHES
POINT STYLE: F16 CONE
SURFACE TREATMENT: CADMIUM OVERALL
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.188 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNS
WIDTH ACROSS FLATS: 0.094 INCHES MINIMUM AND 0.095 INCHES MAXIMUM
Related Searches:
8327705
SETSCREW
NSN, MFG P/N
5305008327705
NSN
5305-00-832-7705
MFG
U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
Description
FASTENER LENGTH: 0.188 INCHES NOMINAL
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 4140 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
NONSTANDARD THREAD PITCH DIAMETER: 0.1605 TO 0.1629 INCHES
POINT STYLE: F16 CONE
SURFACE TREATMENT: CADMIUM OVERALL
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.188 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNS
WIDTH ACROSS FLATS: 0.094 INCHES MINIMUM AND 0.095 INCHES MAXIMUM
Related Searches:
906B1
SETSCREW
NSN, MFG P/N
5305008327705
NSN
5305-00-832-7705
MFG
DIAMOND REO TRUCK CO
Description
FASTENER LENGTH: 0.188 INCHES NOMINAL
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 4140 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
NONSTANDARD THREAD PITCH DIAMETER: 0.1605 TO 0.1629 INCHES
POINT STYLE: F16 CONE
SURFACE TREATMENT: CADMIUM OVERALL
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.188 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNS
WIDTH ACROSS FLATS: 0.094 INCHES MINIMUM AND 0.095 INCHES MAXIMUM
Related Searches:
2289916
SCREW AIR HORN COVE
NSN, MFG P/N
5305008327715
NSN
5305-00-832-7715
MFG
MILITARY VEHICLES OPN GENERAL MOTORS TRUCK AND BUS GROUP MS 2603-02
Description
SCREW AIR HORN COVE
Related Searches:
5R461
SCREW AIR HORN COVE
NSN, MFG P/N
5305008327715
NSN
5305-00-832-7715
MFG
COLT INDUSTRIES INC HOLLEY AUTOMOTIVE DIV
Description
SCREW AIR HORN COVE
Related Searches:
2289915
SCREW THROTTLE BODY
NSN, MFG P/N
5305008327716
NSN
5305-00-832-7716
MFG
MILITARY VEHICLES OPN GENERAL MOTORS TRUCK AND BUS GROUP MS 2603-02
Description
SCREW THROTTLE BODY
Related Searches:
5R458
SCREW THROTTLE BODY
NSN, MFG P/N
5305008327716
NSN
5305-00-832-7716
MFG
COLT INDUSTRIES INC HOLLEY AUTOMOTIVE DIV
Description
SCREW THROTTLE BODY