My Quote Request
5305-00-880-9573
20 Products
10X909X
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305008809573
NSN
5305-00-880-9573
MFG
AXLETECH INTERNATIONAL INC.
Description
FASTENER LENGTH: 1.020 INCHES NOMINAL
HEAD HEIGHT: 0.020 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
HOLE CONFIGURATION STYLE: E6 HEXAGON FLATS
HOLE DIAMETER: 0.079 INCHES MINIMUM AND 0.109 INCHES MAXIMUM
HOLE QUANTITY: 4
HOLE TYPE: DRILLED
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 8 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.880 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.500 INCHES NOMINAL
Related Searches:
106751-01-51C
SCREW,MACHINE
NSN, MFG P/N
5305008807775
NSN
5305-00-880-7775
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD DIAMETER: 0.130 INCHES MINIMUM AND 0.149 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B10 SLOT
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.073 INCHES
SCREW MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 321 OR STEEL COMP 347
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 64
THREAD SERIES DESIGNATOR: UNC
Related Searches:
9145-51
SCREW,MACHINE
NSN, MFG P/N
5305008807775
NSN
5305-00-880-7775
MFG
FIRST AMERICAN SALES CO INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD DIAMETER: 0.130 INCHES MINIMUM AND 0.149 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B10 SLOT
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.073 INCHES
SCREW MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 321 OR STEEL COMP 347
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 64
THREAD SERIES DESIGNATOR: UNC
Related Searches:
965813-51C
SCREW,MACHINE
NSN, MFG P/N
5305008807775
NSN
5305-00-880-7775
MFG
RAYTHEON COMPANY
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD DIAMETER: 0.130 INCHES MINIMUM AND 0.149 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B10 SLOT
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.073 INCHES
SCREW MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 321 OR STEEL COMP 347
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 64
THREAD SERIES DESIGNATOR: UNC
Related Searches:
AIC813-01-2
SCREW,MACHINE
NSN, MFG P/N
5305008807775
NSN
5305-00-880-7775
MFG
SPS TECHNOLOGIES LLC DBA AIR INDUSTRIES
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD DIAMETER: 0.130 INCHES MINIMUM AND 0.149 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B10 SLOT
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.073 INCHES
SCREW MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 321 OR STEEL COMP 347
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 64
THREAD SERIES DESIGNATOR: UNC
Related Searches:
AOL4168-51
SCREW,MACHINE
NSN, MFG P/N
5305008807775
NSN
5305-00-880-7775
MFG
ALL MANUFACTURERS INC. DBA ALLIED MANUFACTURERS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD DIAMETER: 0.130 INCHES MINIMUM AND 0.149 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B10 SLOT
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.073 INCHES
SCREW MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 321 OR STEEL COMP 347
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 64
THREAD SERIES DESIGNATOR: UNC
Related Searches:
E125-51
SCREW,MACHINE
NSN, MFG P/N
5305008807775
NSN
5305-00-880-7775
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD DIAMETER: 0.130 INCHES MINIMUM AND 0.149 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B10 SLOT
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.073 INCHES
SCREW MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 321 OR STEEL COMP 347
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 64
THREAD SERIES DESIGNATOR: UNC
Related Searches:
E125-51
SCREW,MACHINE
NSN, MFG P/N
5305008807775
NSN
5305-00-880-7775
MFG
HUCK INTL INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD DIAMETER: 0.130 INCHES MINIMUM AND 0.149 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B10 SLOT
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.073 INCHES
SCREW MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 321 OR STEEL COMP 347
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 64
THREAD SERIES DESIGNATOR: UNC
Related Searches:
NAS662C1-2
SCREW,MACHINE
NSN, MFG P/N
5305008807775
NSN
5305-00-880-7775
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD DIAMETER: 0.130 INCHES MINIMUM AND 0.149 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B10 SLOT
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.073 INCHES
SCREW MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 321 OR STEEL COMP 347
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 64
THREAD SERIES DESIGNATOR: UNC
Related Searches:
PBF1068-51C
SCREW,MACHINE
NSN, MFG P/N
5305008807775
NSN
5305-00-880-7775
MFG
PAUL R. BRILES INC. DBA PB FASTENERS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD DIAMETER: 0.130 INCHES MINIMUM AND 0.149 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B10 SLOT
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.073 INCHES
SCREW MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 321 OR STEEL COMP 347
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 64
THREAD SERIES DESIGNATOR: UNC
Related Searches:
NAS1301C4-7
SCREW,ASSEMBLED WASHER
NSN, MFG P/N
5305008808180
NSN
5305-00-880-8180
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.438 INCHES NOMINAL
HEAD DIAMETER: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
HEAD HEIGHT: 0.078 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 430 OR STEEL COMP 302 OR STEEL COMP 303SE OR STEEL COMP 301 OR STEEL COMP 304 OR STEEL COMP 316 OVERALL
NOMINAL THREAD DIAMETER: 0.112 INCHES
PRIMARY WASHER MATERIAL THICKNESS: 0.013 INCHES MINIMUM AND 0.223 INCHES MAXIMUM
PRIMARY WASHER OUTSIDE DIAMETER: 0.213 INCHES NOMINAL
PRIMARY WASHER STYLE: G9 SPLIT HELICAL RING
SECONDARY WASHER MATERIAL THICKNESS: 0.013 INCHES MINIMUM AND 0.019 INCHES MAXIMUM
SECONDARY WASHER OUTSIDE DIAMETER: 0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM
SECONDARY WASHER RELATIONSHIP TO PRIMARY WASHER: NOT IDENTICAL
SECONDARY WASHER STYLE: G30 FLAT
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.325 INCHES MINIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
WASHER QUANTITY: 2
Related Searches:
NAS1301C4-5
SCREW,ASSEMBLED WASHER
NSN, MFG P/N
5305008808192
NSN
5305-00-880-8192
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.280 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
HEAD DIAMETER: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
HEAD HEIGHT: 0.078 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 430 OR STEEL COMP 303SE OR STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR MIL-S-7720 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-18732 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-5059 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-5059 MIL SPEC 5TH MATERIAL RESPONSE OR MIL-S-5059 MIL SPEC 6TH
NOMINAL THREAD DIAMETER: 0.112 INCHES
PRIMARY WASHER MATERIAL THICKNESS: 0.025 INCHES MINIMUM AND 0.031 INCHES MAXIMUM
PRIMARY WASHER OUTSIDE DIAMETER: 0.212 INCHES MAXIMUM
PRIMARY WASHER STYLE: G9 SPLIT HELICAL RING
SECONDARY WASHER MATERIAL THICKNESS: 0.013 INCHES MINIMUM
SECONDARY WASHER OUTSIDE DIAMETER: 0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM
SECONDARY WASHER RELATIONSHIP TO PRIMARY WASHER: NOT IDENTICAL
SECONDARY WASHER STYLE: G30 FLAT
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.231 INCHES MINIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
WASHER QUANTITY: 2
~1: MATERIAL RESPONSE OR MIL-S-5059 MIL SPEC 7TH MATERIAL RESPONSE OR MIL-S-6721 MIL SPEC 8TH MATERIAL RESPONSE OVERALL
Related Searches:
106334-3-3
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305008809448
NSN
5305-00-880-9448
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
COUNTERSINK ANGLE: 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
FASTENER LENGTH: 0.447 INCHES MINIMUM AND 0.494 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.270 INCHES MINIMUM AND 0.302 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP H11 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS6485 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.192 INCHES
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES MINIMUM AND 0.317 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
106334-3-3
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305008809448
NSN
5305-00-880-9448
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
COUNTERSINK ANGLE: 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
FASTENER LENGTH: 0.447 INCHES MINIMUM AND 0.494 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.270 INCHES MINIMUM AND 0.302 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP H11 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS6485 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.192 INCHES
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES MINIMUM AND 0.317 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
202-15522-3-3
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305008809448
NSN
5305-00-880-9448
MFG
VOUGHT AIRCRAFT INDUSTRIES INC.
Description
COUNTERSINK ANGLE: 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
FASTENER LENGTH: 0.447 INCHES MINIMUM AND 0.494 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.270 INCHES MINIMUM AND 0.302 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP H11 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS6485 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.192 INCHES
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES MINIMUM AND 0.317 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
3-3
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305008809448
NSN
5305-00-880-9448
MFG
HUCK INTL INC
Description
COUNTERSINK ANGLE: 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
FASTENER LENGTH: 0.447 INCHES MINIMUM AND 0.494 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.270 INCHES MINIMUM AND 0.302 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP H11 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS6485 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.192 INCHES
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES MINIMUM AND 0.317 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
AIC83-3-3
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305008809448
NSN
5305-00-880-9448
MFG
SPS TECHNOLOGIES LLC DBA AIR INDUSTRIES
Description
COUNTERSINK ANGLE: 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
FASTENER LENGTH: 0.447 INCHES MINIMUM AND 0.494 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.270 INCHES MINIMUM AND 0.302 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP H11 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS6485 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.192 INCHES
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES MINIMUM AND 0.317 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
BA45132-3-3
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305008809448
NSN
5305-00-880-9448
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
FASTENER LENGTH: 0.447 INCHES MINIMUM AND 0.494 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.270 INCHES MINIMUM AND 0.302 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP H11 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS6485 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.192 INCHES
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES MINIMUM AND 0.317 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
BA45132-3-3
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305008809448
NSN
5305-00-880-9448
MFG
HUCK INTL INC
Description
COUNTERSINK ANGLE: 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
FASTENER LENGTH: 0.447 INCHES MINIMUM AND 0.494 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.270 INCHES MINIMUM AND 0.302 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP H11 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS6485 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.192 INCHES
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES MINIMUM AND 0.317 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
VT1631-3-3
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305008809448
NSN
5305-00-880-9448
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
COUNTERSINK ANGLE: 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
FASTENER LENGTH: 0.447 INCHES MINIMUM AND 0.494 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.270 INCHES MINIMUM AND 0.302 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP H11 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS6485 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.192 INCHES
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES MINIMUM AND 0.317 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF