My Quote Request
5305-00-883-9257
20 Products
7S35-3A29
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305008839257
NSN
5305-00-883-9257
MFG
BOEING COMPANY THE DBA BOEING
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 2.073 INCHES MINIMUM AND 2.103 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 1.802 INCHES MINIMUM AND 1.822 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.328 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150 OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1153 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
M62FS440-6CC
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305008836494
NSN
5305-00-883-6494
MFG
NYLOK CORPORATION DBA NYLOK WESTERN FASTENER DIV NYLOK WESTERN
Description
COUNTERSINK ANGLE: 82.0 DEGREES NOMINAL
FASTENER LENGTH: 0.375 INCHES NOMINAL
HEAD DIAMETER: 0.218 INCHES MINIMUM AND 0.233 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D5 HEXAGON
LOCKING FEATURE: PELLET THREADS
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.112 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-A-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.375 INCHES MINIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.062 INCHES NOMINAL
Related Searches:
AN565B1032H6
SETSCREW
NSN, MFG P/N
5305008836497
NSN
5305-00-883-6497
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
FASTENER LENGTH: 0.375 INCHES NOMINAL
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 88044
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN565B1032H6
POINT STYLE: F16 CONE
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: FLEET BALLISTIC MISSILE QUALITY CONTROL NO. POSO911140
SURFACE TREATMENT: CADMIUM OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.375 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.094 INCHES MINIMUM AND 0.095 INCHES MAXIMUM
Related Searches:
1762037-1
SCREW,MACHINE
NSN, MFG P/N
5305008838152
NSN
5305-00-883-8152
MFG
HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS
Description
DESIGN CONTROL REFERENCE: 1762037-1
FASTENER LENGTH: 0.344 INCHES NOMINAL
HEAD DIAMETER: 0.275 INCHES NOMINAL
HEAD HEIGHT: 0.063 INCHES NOMINAL
HEAD STYLE: A20 BINDING
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 55972
NOMINAL THREAD DIAMETER: 0.164 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.285 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
1762037-1
SCREW,MACHINE
NSN, MFG P/N
5305008838152
NSN
5305-00-883-8152
MFG
HARDWARE SPECIALTY CO. INC.
Description
DESIGN CONTROL REFERENCE: 1762037-1
FASTENER LENGTH: 0.344 INCHES NOMINAL
HEAD DIAMETER: 0.275 INCHES NOMINAL
HEAD HEIGHT: 0.063 INCHES NOMINAL
HEAD STYLE: A20 BINDING
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 55972
NOMINAL THREAD DIAMETER: 0.164 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.285 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
1762037-1
SCREW,MACHINE
NSN, MFG P/N
5305008838152
NSN
5305-00-883-8152
MFG
HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER BENDIX NAVIGATION AND CONTROL SYSTEMS
Description
DESIGN CONTROL REFERENCE: 1762037-1
FASTENER LENGTH: 0.344 INCHES NOMINAL
HEAD DIAMETER: 0.275 INCHES NOMINAL
HEAD HEIGHT: 0.063 INCHES NOMINAL
HEAD STYLE: A20 BINDING
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 55972
NOMINAL THREAD DIAMETER: 0.164 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.285 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
2741062
SCREW,MACHINE
NSN, MFG P/N
5305008838250
NSN
5305-00-883-8250
MFG
STEWART WARNER SOUTH WIND CORPORATION
Description
DESIGN CONTROL REFERENCE: 2741062
FASTENER LENGTH: 0.625 INCHES NOMINAL
HEAD DIAMETER: 0.217 INCHES NOMINAL
HEAD HEIGHT: 0.123 INCHES NOMINAL
HEAD HOLE CONFIGURATION STYLE: C8 ROUND
HEAD STYLE: A33 FILLISTER
HOLE DIAMETER: 0.047 INCHES NOMINAL
HOLE QUANTITY: 1
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 78385
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: STEEL COMP 1212
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.437 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
5305008838377
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305008838377
NSN
5305-00-883-8377
5305008838377
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305008838377
NSN
5305-00-883-8377
MFG
E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.468 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 0.843 INCHES NOMINAL
FIRST DIAMETER FROM HEAD: 0.120 INCHES NOMINAL
HEAD DIAMETER: 0.250 INCHES NOMINAL
HEAD HEIGHT: 0.156 INCHES NOMINAL
HEAD STYLE: C44 FILLISTER
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.164 INCHES
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.375 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
SCB136223
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305008838377
NSN
5305-00-883-8377
SCB136223
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305008838377
NSN
5305-00-883-8377
MFG
US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.468 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 0.843 INCHES NOMINAL
FIRST DIAMETER FROM HEAD: 0.120 INCHES NOMINAL
HEAD DIAMETER: 0.250 INCHES NOMINAL
HEAD HEIGHT: 0.156 INCHES NOMINAL
HEAD STYLE: C44 FILLISTER
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.164 INCHES
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.375 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
60-19-6579
SCREW,MACHINE
NSN, MFG P/N
5305008838689
NSN
5305-00-883-8689
MFG
ELECTRIC BOAT CORPORATION
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.500 INCHES NOMINAL
HEAD DIAMETER: 0.410 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81349
NOMINAL THREAD DIAMETER: 0.216 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MILS933
NONDEFINITIVE SPEC/STD DATA: A TYPE
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW SURFACE TREATMENT: PASSIVATE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.312 INCHES MINIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
Related Searches:
MILS933
SCREW,MACHINE
NSN, MFG P/N
5305008838689
NSN
5305-00-883-8689
MFG
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.500 INCHES NOMINAL
HEAD DIAMETER: 0.410 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81349
NOMINAL THREAD DIAMETER: 0.216 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MILS933
NONDEFINITIVE SPEC/STD DATA: A TYPE
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW SURFACE TREATMENT: PASSIVATE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.312 INCHES MINIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
Related Searches:
60-19-7254
SCREW,MACHINE
NSN, MFG P/N
5305008838698
NSN
5305-00-883-8698
MFG
ELECTRIC BOAT CORPORATION
Description
DEPARTURE FROM CITED DESIGNATOR: AS MODIFIED BY MATL
HEAD DIAMETER: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD HEIGHT: 0.091 INCHES MINIMUM AND 0.103 INCHES MAXIMUM
HEAD STYLE: A28 ROUND
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81349
NOMINAL THREAD DIAMETER: 0.138 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MILS933TYPEB
NONDEFINITIVE SPEC/STD DATA: B TYPE
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,CL 304,CONDITION A FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SPECIAL FEATURES: THREAD AS CLOSE TO HEAD AS PRACTICABLE,1.000 IN. LG,SECTION A,REF DWG GROUP 29
THREAD CLASS: 2A
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
60-23-9654
SCREW,MACHINE
NSN, MFG P/N
5305008838698
NSN
5305-00-883-8698
MFG
ELECTRIC BOAT CORPORATION
Description
DEPARTURE FROM CITED DESIGNATOR: AS MODIFIED BY MATL
HEAD DIAMETER: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD HEIGHT: 0.091 INCHES MINIMUM AND 0.103 INCHES MAXIMUM
HEAD STYLE: A28 ROUND
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81349
NOMINAL THREAD DIAMETER: 0.138 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MILS933TYPEB
NONDEFINITIVE SPEC/STD DATA: B TYPE
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,CL 304,CONDITION A FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SPECIAL FEATURES: THREAD AS CLOSE TO HEAD AS PRACTICABLE,1.000 IN. LG,SECTION A,REF DWG GROUP 29
THREAD CLASS: 2A
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
MILS933TYPEB
SCREW,MACHINE
NSN, MFG P/N
5305008838698
NSN
5305-00-883-8698
MFG
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEPARTURE FROM CITED DESIGNATOR: AS MODIFIED BY MATL
HEAD DIAMETER: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD HEIGHT: 0.091 INCHES MINIMUM AND 0.103 INCHES MAXIMUM
HEAD STYLE: A28 ROUND
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81349
NOMINAL THREAD DIAMETER: 0.138 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MILS933TYPEB
NONDEFINITIVE SPEC/STD DATA: B TYPE
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,CL 304,CONDITION A FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SPECIAL FEATURES: THREAD AS CLOSE TO HEAD AS PRACTICABLE,1.000 IN. LG,SECTION A,REF DWG GROUP 29
THREAD CLASS: 2A
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
7S28A5-11
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305008838757
NSN
5305-00-883-8757
MFG
BOEING COMPANY THE DBA BOEING
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.203 INCHES MINIMUM AND 1.233 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.577 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS2810 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.555 INCHES MINIMUM AND 0.605 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
Related Searches:
NAS2805-11
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305008838757
NSN
5305-00-883-8757
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.203 INCHES MINIMUM AND 1.233 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.577 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS2810 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.555 INCHES MINIMUM AND 0.605 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
Related Searches:
NAS2805-9
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305008838759
NSN
5305-00-883-8759
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.077 INCHES MINIMUM AND 1.107 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.562 INCHES NOMINAL
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.577 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS2805 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.530 INCHES MINIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
Related Searches:
NAS608C4H14
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305008839042
NSN
5305-00-883-9042
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.865 INCHES MINIMUM AND 0.895 INCHES MAXIMUM
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.367 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
HOLE CONFIGURATION STYLE: E11 ROUND INTERNAL HEXAGON
HOLE DIAMETER: 0.063 INCHES NOMINAL
HOLE QUANTITY: 2
HOLE TYPE: DRILLED
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS608 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.895 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
Related Searches:
NAS600-30B
SCREW,MACHINE
NSN, MFG P/N
5305008839123
NSN
5305-00-883-9123
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 1.813 INCHES MINIMUM AND 1.875 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
HEAD HEIGHT: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: STEEL COMP 8630
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6050 MIL SPEC SINGLE MATERIAL RESPONSE OR AN-S-9 MIL STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.763 INCHES MINIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
NAS1623-13
SCREW,MACHINE
NSN, MFG P/N
5305008839221
NSN
5305-00-883-9221
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.073 INCHES MINIMUM AND 1.103 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.322 INCHES MINIMUM AND 0.387 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B5 TORQUE SET
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC ALL TREATMENT RESPONSES
SPECIFICATION/STANDARD DATA: 80205-NAS1623 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF