My Quote Request
5305-00-923-9193
20 Products
195272
SCREW,MACHINE
NSN, MFG P/N
5305009239193
NSN
5305-00-923-9193
MFG
LUCENT TECHNOLOGIES INC DBA FEDERAL MARKETING GROUP
Description
SCREW,MACHINE
Related Searches:
MS35307-466
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305009238268
NSN
5305-00-923-8268
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 2.406 INCHES MINIMUM AND 2.500 INCHES MAXIMUM
HARDNESS RATING: 81.7 ROCKWELL B NOMINAL OVERALL
HEAD HEIGHT: 0.378 INCHES MINIMUM AND 0.403 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL CORROSION RESISTING OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.625 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.802 INCHES MINIMUM AND 1.818 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 11
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.922 INCHES MINIMUM AND 0.937 INCHES MAXIMUM
Related Searches:
MS35307-466
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305009238268
NSN
5305-00-923-8268
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
FASTENER LENGTH: 2.406 INCHES MINIMUM AND 2.500 INCHES MAXIMUM
HARDNESS RATING: 81.7 ROCKWELL B NOMINAL OVERALL
HEAD HEIGHT: 0.378 INCHES MINIMUM AND 0.403 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL CORROSION RESISTING OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.625 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.802 INCHES MINIMUM AND 1.818 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 11
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.922 INCHES MINIMUM AND 0.937 INCHES MAXIMUM
Related Searches:
5305009238269
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305009238269
NSN
5305-00-923-8269
MFG
E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES
Description
FASTENER LENGTH: 1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM
HARDNESS RATING: 25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
HOLE CONFIGURATION STYLE: E6 HEXAGON FLATS
HOLE DIAMETER: 0.062 INCHES NOMINAL
HOLE QUANTITY: 1
HOLE TYPE: DRILLED
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 120000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.740 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.428 INCHES MINIMUM AND 0.437 INCHES MAXIMUM
Related Searches:
MS51095-309
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305009238269
NSN
5305-00-923-8269
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM
HARDNESS RATING: 25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
HOLE CONFIGURATION STYLE: E6 HEXAGON FLATS
HOLE DIAMETER: 0.062 INCHES NOMINAL
HOLE QUANTITY: 1
HOLE TYPE: DRILLED
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 120000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.740 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.428 INCHES MINIMUM AND 0.437 INCHES MAXIMUM
Related Searches:
MS51095-309
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305009238269
NSN
5305-00-923-8269
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
FASTENER LENGTH: 1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM
HARDNESS RATING: 25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
HOLE CONFIGURATION STYLE: E6 HEXAGON FLATS
HOLE DIAMETER: 0.062 INCHES NOMINAL
HOLE QUANTITY: 1
HOLE TYPE: DRILLED
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 120000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.740 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.428 INCHES MINIMUM AND 0.437 INCHES MAXIMUM
Related Searches:
S250-12DH
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305009238269
NSN
5305-00-923-8269
MFG
BRADEN CARCO GEARMATIC DIV OF PACCAR INC
Description
FASTENER LENGTH: 1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM
HARDNESS RATING: 25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
HOLE CONFIGURATION STYLE: E6 HEXAGON FLATS
HOLE DIAMETER: 0.062 INCHES NOMINAL
HOLE QUANTITY: 1
HOLE TYPE: DRILLED
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 120000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.740 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.428 INCHES MINIMUM AND 0.437 INCHES MAXIMUM
Related Searches:
NAS340CA23
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305009238567
NSN
5305-00-923-8567
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 2.499 INCHES MINIMUM AND 2.546 INCHES MAXIMUM
GRIP DIAMETER: 0.6230 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM
GRIP LENGTH: 1.552 INCHES MINIMUM AND 1.572 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.262 INCHES MINIMUM AND 1.272 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.625 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS340 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES GRIP
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.927 INCHES MINIMUM AND 0.994 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.501 INCHES MINIMUM AND 0.504 INCHES MAXIMUM
Related Searches:
NAS340CA23
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305009238567
NSN
5305-00-923-8567
MFG
LEVEL ONE FASTENERS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 2.499 INCHES MINIMUM AND 2.546 INCHES MAXIMUM
GRIP DIAMETER: 0.6230 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM
GRIP LENGTH: 1.552 INCHES MINIMUM AND 1.572 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.262 INCHES MINIMUM AND 1.272 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.625 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS340 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES GRIP
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.927 INCHES MINIMUM AND 0.994 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.501 INCHES MINIMUM AND 0.504 INCHES MAXIMUM
Related Searches:
NAS340CA23
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305009238567
NSN
5305-00-923-8567
MFG
REID PRODUCTS INC.
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 2.499 INCHES MINIMUM AND 2.546 INCHES MAXIMUM
GRIP DIAMETER: 0.6230 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM
GRIP LENGTH: 1.552 INCHES MINIMUM AND 1.572 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.262 INCHES MINIMUM AND 1.272 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.625 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS340 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES GRIP
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.927 INCHES MINIMUM AND 0.994 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.501 INCHES MINIMUM AND 0.504 INCHES MAXIMUM
Related Searches:
MS51975-14
SCREW,SHOULDER
NSN, MFG P/N
5305009238599
NSN
5305-00-923-8599
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 2.168 INCHES MINIMUM AND 2.188 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.419 INCHES MINIMUM AND 0.437 INCHES MAXIMUM
HEAD HEIGHT: 0.209 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL OVERALL
MINIMUM TENSILE STRENGTH: 140000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHOULDER DIAMETER: 0.3085 INCHES MINIMUM AND 0.3105 INCHES MAXIMUM FIRST SHOULDER
SHOULDER LENGTH: 1.750 INCHES NOMINAL FIRST SHOULDER
SHOULDER SHAPE: ROUND FIRST SHOULDER
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.418 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.156 INCHES NOMINAL
Related Searches:
MS51975-14
SCREW,SHOULDER
NSN, MFG P/N
5305009238599
NSN
5305-00-923-8599
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
FASTENER LENGTH: 2.168 INCHES MINIMUM AND 2.188 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.419 INCHES MINIMUM AND 0.437 INCHES MAXIMUM
HEAD HEIGHT: 0.209 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL OVERALL
MINIMUM TENSILE STRENGTH: 140000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHOULDER DIAMETER: 0.3085 INCHES MINIMUM AND 0.3105 INCHES MAXIMUM FIRST SHOULDER
SHOULDER LENGTH: 1.750 INCHES NOMINAL FIRST SHOULDER
SHOULDER SHAPE: ROUND FIRST SHOULDER
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.418 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.156 INCHES NOMINAL
Related Searches:
NAS1218-08-5P
SCREW,MACHINE
NSN, MFG P/N
5305009238660
NSN
5305-00-923-8660
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.651 INCHES NOMINAL
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD HEIGHT: 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B6 HIGH-TORQUE
NOMINAL THREAD DIAMETER: 0.164 INCHES
SCREW MATERIAL: STEEL COMP E4340 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150 OR STEEL COMP 4140 OR STEEL COMP 4037
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 5TH MATERIAL RESPONSE OR AMS 6300 ASSN STD 6TH MATERIAL
SCREW SURFACE TREATMENT: CADMIUM
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.339 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
~1: RESPONSE
Related Searches:
NK500D6-14
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305009238812
NSN
5305-00-923-8812
MFG
NYLOK CORPORATION DBA NYLOK WESTERN FASTENER DIV NYLOK WESTERN
Description
FASTENER LENGTH: 0.891 INCHES NOMINAL
HEAD DIAMETER: 0.208 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
HEAD HEIGHT: 0.089 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
HEAD STYLE: C44 FILLISTER
INTERNAL DRIVE STYLE: D14 SLOT
LOCKING FEATURE: PELLET THREADS
MATERIAL: STEEL COMP 302 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 316 OVERALL
NOMINAL THREAD DIAMETER: 0.138 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.829 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
NK500AD8-8
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305009238813
NSN
5305-00-923-8813
MFG
NYLOK CORPORATION DBA NYLOK WESTERN FASTENER DIV NYLOK WESTERN
Description
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HEAD DIAMETER: 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.106 INCHES MINIMUM AND 0.113 INCHES MAXIMUM
HEAD STYLE: C44 FILLISTER
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
LOCKING FEATURE: PELLET THREADS
MATERIAL: STEEL COMP 302 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 316 OVERALL
NOMINAL THREAD DIAMETER: 0.164 INCHES
SPECIAL FEATURES: 1 DRILLED HOLE IN HEAD,0.045 IN. MIN,0.050 IN. MAX DIA
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
NK500D6-5
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305009238814
NSN
5305-00-923-8814
MFG
NYLOK CORPORATION DBA NYLOK WESTERN FASTENER DIV NYLOK WESTERN
Description
FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HEAD DIAMETER: 0.208 INCHES MINIMUM AND 0.220 INCHES MAXIMUM
HEAD HEIGHT: 0.089 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
HEAD STYLE: C44 FILLISTER
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
LOCKING FEATURE: PELLET THREADS
MATERIAL: STEEL COMP 302 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 316 OVERALL
NOMINAL THREAD DIAMETER: 0.138 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
3570025
SCREW
NSN, MFG P/N
5305009238836
NSN
5305-00-923-8836
MFG
PITNEY BOWES INC. DBA PITNEY BOWES
Description
SCREW
Related Searches:
507075PC3
SCREW,MACHINE
NSN, MFG P/N
5305009238875
NSN
5305-00-923-8875
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
COUNTERSINK ANGLE: 60.0 DEGREES NOMINAL
FASTENER LENGTH: 0.450 INCHES NOMINAL
HEAD DIAMETER: 0.407 INCHES MINIMUM AND 0.413 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B10 SLOT
NOMINAL THREAD DIAMETER: 0.250 INCHES
SCREW MATERIAL: STEEL COMP 1212
SCREW SURFACE TREATMENT: PHOSPHATE
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.450 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
Related Searches:
547-0544-002
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305009239172
NSN
5305-00-923-9172
547-0544-002
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305009239172
NSN
5305-00-923-9172
MFG
ROCKWELL COLLINS INC. DBA GOVERNMENT SYSTEMS DIV GOVERNMENT SYSTEMS
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.344 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 1.062 INCHES NOMINAL
FIRST DIAMETER FROM HEAD: 0.076 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD DIAMETER: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
HEAD HEIGHT: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 430 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.112 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: 171,FINISH NO. 5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.718 INCHES MINIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
54-37-709-24
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305009239177
NSN
5305-00-923-9177
MFG
SOUTHCO INC.
Description
FASTENER LENGTH: 0.938 INCHES NOMINAL
HEAD DIAMETER: 0.438 INCHES NOMINAL
HEAD HEIGHT: 0.250 INCHES NOMINAL
HEAD STYLE: C69 KNURLED NO. 4
MATERIAL: STEEL COMP 305 STAND-OFF STEEL COMP 303 FASTENER
MATERIAL ACCOMMODATED THICKNESS: 0.062 INCHES MINIMUM AND 0.078 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5514 ASSN STD SINGLE MATERIAL RESPONSE STAND-OFF ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
NOMINAL THREAD DIAMETER: 0.164 INCHES
SPECIAL FEATURES: STRAIGHT KNURL
SURFACE TREATMENT: PASSIVATE STAND-OFF PASSIVATE FASTENER
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.375 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC