My Quote Request
5305-00-937-2624
20 Products
13205E4194
SCREW,MACHINE
NSN, MFG P/N
5305009372624
NSN
5305-00-937-2624
MFG
CECOM LR CENTER
Description
FASTENER LENGTH: 0.250 INCHES NOMINAL
FEATURES PROVIDED: O RING
HEAD DIAMETER: 0.245 INCHES MAXIMUM
HEAD HEIGHT: 0.075 INCHES MAXIMUM
HEAD STYLE: A44 WATERTIGHT
INTERNAL DRIVE STYLE: B10 SLOT
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: STEEL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES MINIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
5700945-1
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305009371007
NSN
5305-00-937-1007
MFG
C SYSTEMS LLC DBA CRAIG SYSTEMS DBA EASTERN TECHNOLOGIES
Description
DESIGN CONTROL REFERENCE: 5700945-1
FASTENER LENGTH: 1.500 INCHES NOMINAL
HEAD HEIGHT: 0.562 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 088A2
MATERIAL: STEEL COMP 416 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.375 INCHES
SPECIAL FEATURES: 1/4-20 TAPPED HOLE IN HEAD ALONG LONGITUDINAL AXIS,3/8 IN. FULL THD
SURFACE TREATMENT: PASSIVATE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.750 INCHES MINIMUM
THREAD QUANTITY PER INCH: 16
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.500 INCHES NOMINAL
Related Searches:
13247-1
SCREW,MACHINE
NSN, MFG P/N
5305009371150
NSN
5305-00-937-1150
MFG
TRIO LABORATORIES INC
Description
DESIGN CONTROL REFERENCE: 13247-1
FASTENER LENGTH: 0.375 INCHES NOMINAL
HEAD DIAMETER: 0.257 INCHES MAXIMUM
HEAD HEIGHT: 0.069 INCHES MAXIMUM
HEAD STYLE: A21 BUTTON
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 00638
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: STEEL COMP 410
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,COND ACF FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.312 INCHES MINIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
411-015-004
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305009371220
NSN
5305-00-937-1220
MFG
INTERSTATE ELECTRONICS CORPORATION
Description
DEPARTURE FROM CITED DESIGNATOR: AS MOD BY LOCKING FEATURE
FASTENER LENGTH: 0.157 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
HEAD DIAMETER: 0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM
HEAD HEIGHT: 0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MATERIAL: STEEL CORROSION RESISTING OR STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,300 SERIES FED SPEC 1ST MATERIAL RESPONSE OR 66,300 SERIES FED STD 1ST MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD 2ND MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.086 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 9C STYLE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.121 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNC
Related Searches:
FFS92
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305009371220
NSN
5305-00-937-1220
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
DEPARTURE FROM CITED DESIGNATOR: AS MOD BY LOCKING FEATURE
FASTENER LENGTH: 0.157 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
HEAD DIAMETER: 0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM
HEAD HEIGHT: 0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MATERIAL: STEEL CORROSION RESISTING OR STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,300 SERIES FED SPEC 1ST MATERIAL RESPONSE OR 66,300 SERIES FED STD 1ST MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD 2ND MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.086 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 9C STYLE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.121 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNC
Related Searches:
LP51957-3
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305009371220
NSN
5305-00-937-1220
MFG
LONG-LOK FASTENERS CORPORATION
Description
DEPARTURE FROM CITED DESIGNATOR: AS MOD BY LOCKING FEATURE
FASTENER LENGTH: 0.157 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
HEAD DIAMETER: 0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM
HEAD HEIGHT: 0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MATERIAL: STEEL CORROSION RESISTING OR STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,300 SERIES FED SPEC 1ST MATERIAL RESPONSE OR 66,300 SERIES FED STD 1ST MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD 2ND MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.086 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 9C STYLE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.121 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNC
Related Searches:
SMB422926-1
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305009371776
NSN
5305-00-937-1776
SMB422926-1
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305009371776
NSN
5305-00-937-1776
MFG
US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.620 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 1.000 INCHES NOMINAL
FIRST DIAMETER FROM HEAD: 0.140 INCHES NOMINAL
HEAD HEIGHT: 0.160 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 COND A ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.280 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.310 INCHES NOMINAL
Related Searches:
HT184-3-9
SCREW,MACHINE
NSN, MFG P/N
5305009371779
NSN
5305-00-937-1779
MFG
HI-SHEAR CORPORATION
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
DESIGN CONTROL REFERENCE: HT184-3-9
FASTENER LENGTH: 0.838 INCHES NOMINAL
HARDNESS RATING: 40.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.297 INCHES MINIMUM AND 0.302 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B6 HIGH-TORQUE
MANUFACTURERS CODE: 73197
MINIMUM TENSILE STRENGTH: 180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL COMP 8630 OR STEEL COMP 4037
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6050 MIL SPEC 1ST MATERIAL RESPONSE OR AMS 6300 ASSN STD 2ND MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.276 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
13205E3965-1
THUMBSCREW
NSN, MFG P/N
5305009372021
NSN
5305-00-937-2021
MFG
CECOM LR CENTER
Description
DESIGN CONTROL REFERENCE: 13205E3965-1
FASTENER LENGTH: 1.688 INCHES NOMINAL
HEAD DIAMETER: 1.000 INCHES NOMINAL
HEAD STYLE: C66 KNURLED NO. 1
MANUFACTURERS CODE: 97403
MATERIAL: STEEL CORROSION RESISTING OVERALL
SURFACE TREATMENT: OXIDE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
Related Searches:
950254-184
SCREW,MACHINE
NSN, MFG P/N
5305009372022
NSN
5305-00-937-2022
MFG
NORTHROP GRUMMAN GUIDANCE AND ELECTRONICS COMPANY INC. DBA NAVIGATION SYSTEMS DIVISION DIV NAVIGATION SYSTEMS DIVISION
Description
DESIGN CONTROL REFERENCE: SFSW10F6DL01GY
FASTENER LENGTH: 0.375 INCHES NOMINAL
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 12324
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL
SCREW SURFACE TREATMENT: CADMIUM AND DICHROMATE
SPECIAL FEATURES: DYED LUSTERLESS GRAY,AND FURNISHED WITH ONE NYLON WASHER
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
SFSW10F6DL01GY
SCREW,MACHINE
NSN, MFG P/N
5305009372022
NSN
5305-00-937-2022
MFG
DUPREE INC . DBA STAKE FASTENER USE CAGE CODE 66071 FOR CATALOGING.
Description
DESIGN CONTROL REFERENCE: SFSW10F6DL01GY
FASTENER LENGTH: 0.375 INCHES NOMINAL
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 12324
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL
SCREW SURFACE TREATMENT: CADMIUM AND DICHROMATE
SPECIAL FEATURES: DYED LUSTERLESS GRAY,AND FURNISHED WITH ONE NYLON WASHER
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
330-2296-00
SCREW,MACHINE
NSN, MFG P/N
5305009372566
NSN
5305-00-937-2566
MFG
ROCKWELL COLLINS INC. DIV GOVERNMENT SYSTEMS - DALLAS
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DESIGN CONTROL REFERENCE: P330-2296-00
FASTENER LENGTH: 0.312 INCHES NOMINAL
HEAD DIAMETER: 0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD HEIGHT: 0.048 INCHES MINIMUM AND 0.059 INCHES MAXIMUM
HEAD STYLE: A40 FLAT COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 77250
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 303
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.191 INCHES MINIMUM AND 0.264 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
330-2296-000
SCREW,MACHINE
NSN, MFG P/N
5305009372566
NSN
5305-00-937-2566
MFG
ROCKWELL COLLINS INC. DIV GOVERNMENT SYSTEMS - DALLAS
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DESIGN CONTROL REFERENCE: P330-2296-00
FASTENER LENGTH: 0.312 INCHES NOMINAL
HEAD DIAMETER: 0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD HEIGHT: 0.048 INCHES MINIMUM AND 0.059 INCHES MAXIMUM
HEAD STYLE: A40 FLAT COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 77250
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 303
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.191 INCHES MINIMUM AND 0.264 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
P330-2296-00
SCREW,MACHINE
NSN, MFG P/N
5305009372566
NSN
5305-00-937-2566
MFG
ALLIED PRODUCTS CORP PHEOLL MFG CO DIV
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DESIGN CONTROL REFERENCE: P330-2296-00
FASTENER LENGTH: 0.312 INCHES NOMINAL
HEAD DIAMETER: 0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD HEIGHT: 0.048 INCHES MINIMUM AND 0.059 INCHES MAXIMUM
HEAD STYLE: A40 FLAT COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 77250
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 303
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.191 INCHES MINIMUM AND 0.264 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
P330-2296-000
SCREW,MACHINE
NSN, MFG P/N
5305009372566
NSN
5305-00-937-2566
MFG
ALLIED PRODUCTS CORP PHEOLL MFG CO DIV
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DESIGN CONTROL REFERENCE: P330-2296-00
FASTENER LENGTH: 0.312 INCHES NOMINAL
HEAD DIAMETER: 0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD HEIGHT: 0.048 INCHES MINIMUM AND 0.059 INCHES MAXIMUM
HEAD STYLE: A40 FLAT COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 77250
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 303
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.191 INCHES MINIMUM AND 0.264 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
1BN4C31P1
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305009372568
NSN
5305-00-937-2568
MFG
H-K CONNECTICUT HOLDING COMPANY
Description
DESIGN CONTROL REFERENCE: 1BN4C31P1
FASTENER LENGTH: 0.312 INCHES NOMINAL
HARDNESS RATING: 28.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.201 INCHES MINIMUM AND 0.213 INCHES MAXIMUM
HEAD HEIGHT: 0.051 INCHES MINIMUM AND 0.059 INCHES MAXIMUM
INTERNAL DRIVE STYLE: D5 HEXAGON
LOCKING FEATURE: PELLET THREADS
MANUFACTURERS CODE: 74445
MATERIAL: STEEL COMP 4037 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.112 INCHES
SURFACE TREATMENT: CADMIUM OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.312 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.063 INCHES NOMINAL
Related Searches:
5479
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305009372568
NSN
5305-00-937-2568
MFG
AIR-LOCK INCORPORATED
Description
DESIGN CONTROL REFERENCE: 1BN4C31P1
FASTENER LENGTH: 0.312 INCHES NOMINAL
HARDNESS RATING: 28.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.201 INCHES MINIMUM AND 0.213 INCHES MAXIMUM
HEAD HEIGHT: 0.051 INCHES MINIMUM AND 0.059 INCHES MAXIMUM
INTERNAL DRIVE STYLE: D5 HEXAGON
LOCKING FEATURE: PELLET THREADS
MANUFACTURERS CODE: 74445
MATERIAL: STEEL COMP 4037 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.112 INCHES
SURFACE TREATMENT: CADMIUM OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.312 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.063 INCHES NOMINAL
Related Searches:
13205E3681
THUMBSCREW
NSN, MFG P/N
5305009372623
NSN
5305-00-937-2623
MFG
CECOM LR CENTER
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.187 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER: 0.562 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 2
FASTENER LENGTH: 1.062 INCHES NOMINAL
FIRST DIAMETER FROM HEAD: 0.190 INCHES NOMINAL
HEAD DIAMETER: 0.375 INCHES NOMINAL
HEAD HEIGHT: 0.250 INCHES NOMINAL
HEAD STYLE: C66 KNURLED NO. 1
MATERIAL: STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
POINT STYLE: F16 CONE
SECOND DIAMETER FROM HEAD: 0.100 INCHES MINIMUM AND 0.102 INCHES MAXIMUM
SURFACE TREATMENT: OXIDE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.500 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
SCC627787
THUMBSCREW
NSN, MFG P/N
5305009372623
NSN
5305-00-937-2623
MFG
US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.187 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER: 0.562 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 2
FASTENER LENGTH: 1.062 INCHES NOMINAL
FIRST DIAMETER FROM HEAD: 0.190 INCHES NOMINAL
HEAD DIAMETER: 0.375 INCHES NOMINAL
HEAD HEIGHT: 0.250 INCHES NOMINAL
HEAD STYLE: C66 KNURLED NO. 1
MATERIAL: STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
POINT STYLE: F16 CONE
SECOND DIAMETER FROM HEAD: 0.100 INCHES MINIMUM AND 0.102 INCHES MAXIMUM
SURFACE TREATMENT: OXIDE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.500 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
SL0440CA04
SCREW,MACHINE
NSN, MFG P/N
5305009372624
NSN
5305-00-937-2624
MFG
A P M HEXSEAL CORPORATION
Description
FASTENER LENGTH: 0.250 INCHES NOMINAL
FEATURES PROVIDED: O RING
HEAD DIAMETER: 0.245 INCHES MAXIMUM
HEAD HEIGHT: 0.075 INCHES MAXIMUM
HEAD STYLE: A44 WATERTIGHT
INTERNAL DRIVE STYLE: B10 SLOT
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: STEEL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES MINIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC