My Quote Request
5305-00-957-7570
20 Products
FF-S-86
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305009577570
NSN
5305-00-957-7570
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.750 INCHES NOMINAL
HARDNESS RATING: 436.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.720 INCHES MINIMUM AND 0.781 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.250 INCHES MINIMUM AND 1.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 16
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.219 INCHES NOMINAL
Related Searches:
422954
SCREW,MACHINE
NSN, MFG P/N
5305009577413
NSN
5305-00-957-7413
MFG
MEGA INDUSTRIES
Description
DESIGN CONTROL REFERENCE: 422954
FASTENER LENGTH: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
HEAD DIAMETER: 0.208 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
HEAD HEIGHT: 0.144 INCHES MINIMUM AND 0.154 INCHES MAXIMUM
HEAD HOLE CONFIGURATION STYLE: C8 ROUND
HEAD STYLE: A33 FILLISTER
HOLE DIAMETER: 0.047 INCHES NOMINAL
HOLE QUANTITY: 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 56503
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: STEEL COMP 303 OR STEEL COMP 303SE
SCREW SURFACE TREATMENT: PASSIVATE
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
422954
SCREW,MACHINE
NSN, MFG P/N
5305009577413
NSN
5305-00-957-7413
MFG
TURBO POWER & MARINE SYSTEM INC SUB OF UNITED TECHNOLOGIES CORP
Description
DESIGN CONTROL REFERENCE: 422954
FASTENER LENGTH: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
HEAD DIAMETER: 0.208 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
HEAD HEIGHT: 0.144 INCHES MINIMUM AND 0.154 INCHES MAXIMUM
HEAD HOLE CONFIGURATION STYLE: C8 ROUND
HEAD STYLE: A33 FILLISTER
HOLE DIAMETER: 0.047 INCHES NOMINAL
HOLE QUANTITY: 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 56503
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: STEEL COMP 303 OR STEEL COMP 303SE
SCREW SURFACE TREATMENT: PASSIVATE
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
422954
SCREW,MACHINE
NSN, MFG P/N
5305009577413
NSN
5305-00-957-7413
MFG
UNITED TECHNOLOGIES CORPORATION DBA PRATT & WHITNEY DIV SPARES/SUPPORT EQUIPMENT
Description
DESIGN CONTROL REFERENCE: 422954
FASTENER LENGTH: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
HEAD DIAMETER: 0.208 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
HEAD HEIGHT: 0.144 INCHES MINIMUM AND 0.154 INCHES MAXIMUM
HEAD HOLE CONFIGURATION STYLE: C8 ROUND
HEAD STYLE: A33 FILLISTER
HOLE DIAMETER: 0.047 INCHES NOMINAL
HOLE QUANTITY: 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 56503
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: STEEL COMP 303 OR STEEL COMP 303SE
SCREW SURFACE TREATMENT: PASSIVATE
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
285893
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305009577446
NSN
5305-00-957-7446
MFG
EATON AEROSPACE LLC
Description
FASTENER LENGTH: 0.845 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
HOLE CONFIGURATION STYLE: E11 ROUND INTERNAL HEXAGON
HOLE DIAMETER: 0.047 INCHES NOMINAL
HOLE QUANTITY: 3
HOLE TYPE: DRILLED
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL OVERALL
MINIMUM TENSILE STRENGTH: 170000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 150000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-86
NONDEFINITIVE SPEC/STD DATA: 6 TYPE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.774 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.1875 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM
Related Searches:
5305009577446
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305009577446
NSN
5305-00-957-7446
MFG
E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES
Description
FASTENER LENGTH: 0.845 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
HOLE CONFIGURATION STYLE: E11 ROUND INTERNAL HEXAGON
HOLE DIAMETER: 0.047 INCHES NOMINAL
HOLE QUANTITY: 3
HOLE TYPE: DRILLED
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL OVERALL
MINIMUM TENSILE STRENGTH: 170000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 150000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-86
NONDEFINITIVE SPEC/STD DATA: 6 TYPE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.774 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.1875 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM
Related Searches:
FF-S-86
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305009577446
NSN
5305-00-957-7446
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
FASTENER LENGTH: 0.845 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
HOLE CONFIGURATION STYLE: E11 ROUND INTERNAL HEXAGON
HOLE DIAMETER: 0.047 INCHES NOMINAL
HOLE QUANTITY: 3
HOLE TYPE: DRILLED
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL OVERALL
MINIMUM TENSILE STRENGTH: 170000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 150000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-86
NONDEFINITIVE SPEC/STD DATA: 6 TYPE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.774 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.1875 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM
Related Searches:
MS24678-23
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305009577446
NSN
5305-00-957-7446
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.845 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
HOLE CONFIGURATION STYLE: E11 ROUND INTERNAL HEXAGON
HOLE DIAMETER: 0.047 INCHES NOMINAL
HOLE QUANTITY: 3
HOLE TYPE: DRILLED
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL OVERALL
MINIMUM TENSILE STRENGTH: 170000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 150000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-86
NONDEFINITIVE SPEC/STD DATA: 6 TYPE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.774 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.1875 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM
Related Searches:
MS24678-23
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305009577446
NSN
5305-00-957-7446
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
FASTENER LENGTH: 0.845 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
HOLE CONFIGURATION STYLE: E11 ROUND INTERNAL HEXAGON
HOLE DIAMETER: 0.047 INCHES NOMINAL
HOLE QUANTITY: 3
HOLE TYPE: DRILLED
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL OVERALL
MINIMUM TENSILE STRENGTH: 170000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 150000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-86
NONDEFINITIVE SPEC/STD DATA: 6 TYPE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.774 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.1875 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM
Related Searches:
MS24678-23C
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305009577446
NSN
5305-00-957-7446
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
FASTENER LENGTH: 0.845 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
HOLE CONFIGURATION STYLE: E11 ROUND INTERNAL HEXAGON
HOLE DIAMETER: 0.047 INCHES NOMINAL
HOLE QUANTITY: 3
HOLE TYPE: DRILLED
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL OVERALL
MINIMUM TENSILE STRENGTH: 170000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 150000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-86
NONDEFINITIVE SPEC/STD DATA: 6 TYPE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.774 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.1875 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM
Related Searches:
1446214-46
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305009577465
NSN
5305-00-957-7465
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
FASTENER LENGTH: 0.845 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
HEAD HEIGHT: 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1352 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.750 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNRC
WIDTH ACROSS FLATS: 0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM
Related Searches:
280-615-0614
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305009577465
NSN
5305-00-957-7465
MFG
NORTHROP GRUMMAN SYSTEMS CORPORATION DBA NORTHROP GRUMMAN SYSTEMS
Description
FASTENER LENGTH: 0.845 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
HEAD HEIGHT: 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1352 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.750 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNRC
WIDTH ACROSS FLATS: 0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM
Related Searches:
B68245
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305009577465
NSN
5305-00-957-7465
MFG
MBDA UK LTD
Description
FASTENER LENGTH: 0.845 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
HEAD HEIGHT: 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1352 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.750 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNRC
WIDTH ACROSS FLATS: 0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM
Related Searches:
H667160614
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305009577465
NSN
5305-00-957-7465
MFG
KEARFOTT CORPORATION DBA KEARFOTT DIV GUIDANCE AND NAVIGATION DIVISION
Description
FASTENER LENGTH: 0.845 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
HEAD HEIGHT: 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1352 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.750 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNRC
WIDTH ACROSS FLATS: 0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM
Related Searches:
HC632-14SSP
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305009577465
NSN
5305-00-957-7465
MFG
KEARFLEX ENGINEERING COMPANY
Description
FASTENER LENGTH: 0.845 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
HEAD HEIGHT: 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1352 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.750 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNRC
WIDTH ACROSS FLATS: 0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM
Related Searches:
NAS1352C06-14
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305009577465
NSN
5305-00-957-7465
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.845 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
HEAD HEIGHT: 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1352 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.750 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNRC
WIDTH ACROSS FLATS: 0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM
Related Searches:
NAS608C632-14
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305009577465
NSN
5305-00-957-7465
MFG
BOSCH REXROTH GMBH LOHMANN STOLTER OHT
Description
FASTENER LENGTH: 0.845 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
HEAD HEIGHT: 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1352 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.750 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNRC
WIDTH ACROSS FLATS: 0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM
Related Searches:
NAS1154C7
SCREW,MACHINE
NSN, MFG P/N
5305009577466
NSN
5305-00-957-7466
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.739 INCHES MINIMUM AND 0.769 INCHES MAXIMUM
HEAD DIAMETER: 0.449 INCHES MINIMUM AND 0.507 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B5 TORQUE SET
MINIMUM TENSILE STRENGTH: 140000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SCREW MATERIAL: IRON ALLOY 660
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5735 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.291 INCHES MINIMUM AND 0.341 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
NAS1081C08A3N
SETSCREW
NSN, MFG P/N
5305009577468
NSN
5305-00-957-7468
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.188 INCHES NOMINAL
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D5 HEXAGON
LOCKING FEATURE: PELLET THREADS
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER: 0.164 INCHES
POINT STYLE: F20 CUP
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.188 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.078 INCHES MINIMUM AND 0.079 INCHES MAXIMUM
Related Searches:
NAS1081C08D3N
SETSCREW
NSN, MFG P/N
5305009577468
NSN
5305-00-957-7468
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.188 INCHES NOMINAL
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D5 HEXAGON
LOCKING FEATURE: PELLET THREADS
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER: 0.164 INCHES
POINT STYLE: F20 CUP
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.188 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.078 INCHES MINIMUM AND 0.079 INCHES MAXIMUM