My Quote Request
5305-01-007-8453
20 Products
10821-6
SCREW,MACHINE
NSN, MFG P/N
5305010078453
NSN
5305-01-007-8453
MFG
ATLANTIC INERTIAL SYSTEMS INC . DBA CHESHIRE DIVISION DIV CHESHIRE DIVISION
Description
COUNTERSINK ANGLE: 81.0 DEGREES NOMINAL
DESIGN CONTROL REFERENCE: 10821-6
FASTENER LENGTH: 0.182 INCHES MINIMUM AND 0.192 INCHES MAXIMUM
HEAD DIAMETER: 0.123 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 24321
NOMINAL THREAD DIAMETER: 0.073 INCHES
SCREW MATERIAL: STEEL COMP 303
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.121 INCHES MINIMUM AND 0.169 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 72
THREAD SERIES DESIGNATOR: UNF
Related Searches:
10821-6
SCREW,MACHINE
NSN, MFG P/N
5305010078453
NSN
5305-01-007-8453
MFG
ATLANTIC INERTIAL SYSTEMS INC
Description
COUNTERSINK ANGLE: 81.0 DEGREES NOMINAL
DESIGN CONTROL REFERENCE: 10821-6
FASTENER LENGTH: 0.182 INCHES MINIMUM AND 0.192 INCHES MAXIMUM
HEAD DIAMETER: 0.123 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 24321
NOMINAL THREAD DIAMETER: 0.073 INCHES
SCREW MATERIAL: STEEL COMP 303
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.121 INCHES MINIMUM AND 0.169 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 72
THREAD SERIES DESIGNATOR: UNF
Related Searches:
10811-6
SCREW,MACHINE
NSN, MFG P/N
5305010078454
NSN
5305-01-007-8454
MFG
ATLANTIC INERTIAL SYSTEMS INC
Description
FASTENER LENGTH: 0.188 INCHES NOMINAL
HEAD DIAMETER: 0.103 INCHES MINIMUM AND 0.118 INCHES MAXIMUM
HEAD HEIGHT: 0.037 INCHES MINIMUM AND 0.046 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B10 SLOT
NOMINAL THREAD DIAMETER: 0.073 INCHES
SCREW MATERIAL: STEEL COMP 303
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.160 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 72
THREAD SERIES DESIGNATOR: UNF
Related Searches:
10811-6
SCREW,MACHINE
NSN, MFG P/N
5305010078454
NSN
5305-01-007-8454
MFG
ATLANTIC INERTIAL SYSTEMS INC . DBA CHESHIRE DIVISION DIV CHESHIRE DIVISION
Description
FASTENER LENGTH: 0.188 INCHES NOMINAL
HEAD DIAMETER: 0.103 INCHES MINIMUM AND 0.118 INCHES MAXIMUM
HEAD HEIGHT: 0.037 INCHES MINIMUM AND 0.046 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B10 SLOT
NOMINAL THREAD DIAMETER: 0.073 INCHES
SCREW MATERIAL: STEEL COMP 303
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.160 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 72
THREAD SERIES DESIGNATOR: UNF
Related Searches:
2200-0707
SCREW
NSN, MFG P/N
5305010078521
NSN
5305-01-007-8521
MFG
HEWLETT PACKARD CO
Description
SCREW
Related Searches:
56062
SCREW
NSN, MFG P/N
5305010078530
NSN
5305-01-007-8530
MFG
CRANE PUMPS & SYSTEMS INC.
Description
SCREW
Related Searches:
M3X8DIN963-5-8STLCADPL
SCREW,MACHINE
NSN, MFG P/N
5305010078616
NSN
5305-01-007-8616
MFG
ZELENDA MACHINE AND TOOLS CORP
Description
COUNTERSINK ANGLE: 90.0 DEGREES NOMINAL
DESIGN CONTROL REFERENCE: M3X8DIN963-5-8STLCADPL
FASTENER LENGTH: 8.000 MILLIMETERS NOMINAL
HEAD DIAMETER: 5.600 MILLIMETERS NOMINAL
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 21969
NOMINAL THREAD DIAMETER: 3.0 MILLIMETERS
SCREW MATERIAL: STEEL
SCREW SURFACE TREATMENT: CADMIUM
THE MANUFACTURERS DATA:
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 6.350 MILLIMETERS NOMINAL
THREAD PITCH IN MILLIMETERS: 0.5
THREAD QUANTITY PER INCH: 51
THREAD SERIES DESIGNATOR: ISO S
Related Searches:
157382-01
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305010078733
NSN
5305-01-007-8733
157382-01
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305010078733
NSN
5305-01-007-8733
MFG
GE AVIATION SYSTEMS LLC
Description
DESIGN CONTROL REFERENCE: 157382-01
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.250 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 0.406 INCHES MINIMUM AND 0.437 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD: 0.075 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD DIAMETER: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
HEAD HEIGHT: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD STYLE: C33 PAN NO. 2
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 35351
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER: 0.112 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.156 INCHES MINIMUM AND 0.187 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 48
THREAD SERIES DESIGNATOR: UNF
Related Searches:
FF-S-92
SCREW,MACHINE
NSN, MFG P/N
5305010078734
NSN
5305-01-007-8734
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
COUNTERSINK ANGLE: 82.0 DEGREES NOMINAL
FASTENER LENGTH: 3.500 INCHES NOMINAL
HEAD DIAMETER: 0.452 INCHES MINIMUM AND 0.507 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
MANUFACTURERS CODE: 81348
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 2S STYLE
SCREW MATERIAL: STEEL CORROSION RESISTING
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 3.500 INCHES NOMINAL
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
Related Searches:
DR-T8X3-4
SCREW,TAPPING
NSN, MFG P/N
5305010078745
NSN
5305-01-007-8745
MFG
DURO DYNE CORPORATION
Description
EXTENDED WASHER DIAMETER: 0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.037 INCHES MINIMUM AND 0.063 INCHES MAXIMUM
FASTENER LENGTH: 8.000 INCHES NOMINAL
HEAD HEIGHT: 0.270 INCHES MINIMUM AND 0.295 INCHES MAXIMUM
HEAD STYLE: C7 HEXAGON EXTENDED WASHER
INTERNAL DRIVE STYLE: D21 W/O INTERNAL DRIVE
MATERIAL: STEEL OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.375 INCHES
NONMACHINE THREAD STYLE: A13 GIMLET POINT (TYPE A, AB OR BA)
SURFACE TREATMENT: CADMIUM OVERALL
WIDTH BETWEEN FLATS: 0.562 INCHES MINIMUM AND 0.614 INCHES MAXIMUM
Related Searches:
SAT8-3-4
SCREW,TAPPING
NSN, MFG P/N
5305010078745
NSN
5305-01-007-8745
MFG
DURO DYNE CORPORATION
Description
EXTENDED WASHER DIAMETER: 0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.037 INCHES MINIMUM AND 0.063 INCHES MAXIMUM
FASTENER LENGTH: 8.000 INCHES NOMINAL
HEAD HEIGHT: 0.270 INCHES MINIMUM AND 0.295 INCHES MAXIMUM
HEAD STYLE: C7 HEXAGON EXTENDED WASHER
INTERNAL DRIVE STYLE: D21 W/O INTERNAL DRIVE
MATERIAL: STEEL OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.375 INCHES
NONMACHINE THREAD STYLE: A13 GIMLET POINT (TYPE A, AB OR BA)
SURFACE TREATMENT: CADMIUM OVERALL
WIDTH BETWEEN FLATS: 0.562 INCHES MINIMUM AND 0.614 INCHES MAXIMUM
Related Searches:
739112-8
SETSCREW
NSN, MFG P/N
5305010078746
NSN
5305-01-007-8746
MFG
HAMILTON SUNDSTRAND CORPORATION
Description
SETSCREW
Related Searches:
NAS1352C4-24
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305010078753
NSN
5305-01-007-8753
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 1.460 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 OR STEEL COMP XM-7 OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1352 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.000 INCHES MINIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
Related Searches:
69581-6-10E
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305010078754
NSN
5305-01-007-8754
MFG
HAMILTON SUNDSTRAND CORPORATION
Description
DESIGN CONTROL REFERENCE: 69581-6-10E
FASTENER LENGTH: 1.234 INCHES MINIMUM AND 1.281 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
HEAD HEIGHT: 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
HOLE CONFIGURATION STYLE: E12 ROUND LONGITUDINAL HOLE
HOLE DIAMETER: 0.028 INCHES NOMINAL
HOLE QUANTITY: 6
HOLE TYPE: DRILLED
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 73030
MATERIAL: STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.138 INCHES
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.172 INCHES MINIMUM AND 1.219 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM
Related Searches:
FF-S-85
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305010078755
NSN
5305-01-007-8755
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS51109-7
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 0.725 INCHES MINIMUM AND 0.776 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 0.844 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
HARDNESS RATING: 235.0 BRINELL STANDARD MAXIMUM OVERALL
HEAD HEIGHT: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MATERIAL: STEEL COMP 403 OR STEEL COMP 405 OR STEEL COMP 410 OR STEEL COMP 414 OR STEEL COMP 416 OR STEEL COMP 416SE OR STEEL COMP 420 OR STEEL COMP 430 OR STEEL COMP 431 OR STEEL COMP 440A OR STEEL COMP 440B OR STEEL COMP 440C OR STEEL COMP 446 OR STEEL COMP 430F
MINIMUM TENSILE STRENGTH: 70000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 40000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-85
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 10P STYLE
SHANK UNTHREADED HOLE DIAMETER: 0.074 INCHES MINIMUM AND 0.082 INCHES MAXIMUM FIRST HOLE
SPEC/STD CONTROLLING DATA:
SURFACE FINISH: 63.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.875 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
~1: OVERALL
Related Searches:
MS51109-7
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305010078755
NSN
5305-01-007-8755
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS51109-7
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 0.725 INCHES MINIMUM AND 0.776 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 0.844 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
HARDNESS RATING: 235.0 BRINELL STANDARD MAXIMUM OVERALL
HEAD HEIGHT: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MATERIAL: STEEL COMP 403 OR STEEL COMP 405 OR STEEL COMP 410 OR STEEL COMP 414 OR STEEL COMP 416 OR STEEL COMP 416SE OR STEEL COMP 420 OR STEEL COMP 430 OR STEEL COMP 431 OR STEEL COMP 440A OR STEEL COMP 440B OR STEEL COMP 440C OR STEEL COMP 446 OR STEEL COMP 430F
MINIMUM TENSILE STRENGTH: 70000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 40000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-85
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 10P STYLE
SHANK UNTHREADED HOLE DIAMETER: 0.074 INCHES MINIMUM AND 0.082 INCHES MAXIMUM FIRST HOLE
SPEC/STD CONTROLLING DATA:
SURFACE FINISH: 63.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.875 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
~1: OVERALL
Related Searches:
AR400
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305010078756
NSN
5305-01-007-8756
MFG
UNITED TECHNOLOGIES CORPORATION DBA PRATT & WHITNEY DIV SPARES/SUPPORT EQUIPMENT
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.172 INCHES MINIMUM AND 1.202 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.429 INCHES MINIMUM AND 0.477 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049RJGCAMS 6322 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.350 INCHES MINIMUM AND 0.400 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
LS15237-5-13
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305010078756
NSN
5305-01-007-8756
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.172 INCHES MINIMUM AND 1.202 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.429 INCHES MINIMUM AND 0.477 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049RJGCAMS 6322 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.350 INCHES MINIMUM AND 0.400 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
LS15237-5-13
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305010078756
NSN
5305-01-007-8756
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.172 INCHES MINIMUM AND 1.202 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.429 INCHES MINIMUM AND 0.477 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049RJGCAMS 6322 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.350 INCHES MINIMUM AND 0.400 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
LS15237-5-13
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305010078756
NSN
5305-01-007-8756
MFG
HI-SHEAR CORPORATION
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.172 INCHES MINIMUM AND 1.202 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.429 INCHES MINIMUM AND 0.477 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049RJGCAMS 6322 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.350 INCHES MINIMUM AND 0.400 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF