My Quote Request
5305-01-008-6405
20 Products
21A0070-000
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305010086405
NSN
5305-01-008-6405
MFG
UNISYS CORP FEDERAL SYSTEMS DIV
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.535 INCHES NOMINAL
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 41.0 ROCKWELL C MAXIMUM FASTENER
HEAD DIAMETER: 0.300 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D2 CROSS RECESS TYPE II
MATERIAL: STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 347 OR STEEL COMP 348 STAND-OFF STEEL COMP 8740 FASTENER
MATERIAL ACCOMMODATED THICKNESS: 0.090 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-23195 MIL SPEC ALL MATERIAL RESPONSES STAND-OFF MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE FASTENER
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
247ASC1464-001
SCREW
NSN, MFG P/N
5305010085363
NSN
5305-01-008-5363
MFG
NAVAL AIR SYSTEMS COMMAND
Description
SCREW
Related Searches:
AC0-80
SCREW
NSN, MFG P/N
5305010085363
NSN
5305-01-008-5363
MFG
ALL MANUFACTURERS INC. DBA ALLIED MANUFACTURERS
Description
SCREW
Related Searches:
247ASC1423-002
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305010085364
NSN
5305-01-008-5364
MFG
NAVAL AIR SYSTEMS COMMAND
Description
DESIGN CONTROL REFERENCE: CA29040-06-2-6P
HEAD DIAMETER: 0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD STYLE: C44 FILLISTER
MANUFACTURERS CODE: 29372
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314
NOMINAL THREAD DIAMETER: 0.138 INCHES
SURFACE TREATMENT: PASSIVATE SPRING PASSIVATE STAND-OFF PASSIVATE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STAND-OFF QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
~1: OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 SPRING STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP
~2: 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP
~3: 348 OR STEEL COMP 384 OR STEEL COMP 385 STAND-OFF STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR
~4: STEEL COMP 310 OR STEEL COMP 1054 OR STEEL COMP 1055 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 FASTENER
Related Searches:
CA2901-2-6P
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305010085364
NSN
5305-01-008-5364
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TRIDAIR PRODUCTS
Description
DESIGN CONTROL REFERENCE: CA29040-06-2-6P
HEAD DIAMETER: 0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD STYLE: C44 FILLISTER
MANUFACTURERS CODE: 29372
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314
NOMINAL THREAD DIAMETER: 0.138 INCHES
SURFACE TREATMENT: PASSIVATE SPRING PASSIVATE STAND-OFF PASSIVATE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STAND-OFF QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
~1: OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 SPRING STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP
~2: 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP
~3: 348 OR STEEL COMP 384 OR STEEL COMP 385 STAND-OFF STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR
~4: STEEL COMP 310 OR STEEL COMP 1054 OR STEEL COMP 1055 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 FASTENER
Related Searches:
CA29040-06-2-6P
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305010085364
NSN
5305-01-008-5364
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TRIDAIR PRODUCTS
Description
DESIGN CONTROL REFERENCE: CA29040-06-2-6P
HEAD DIAMETER: 0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD STYLE: C44 FILLISTER
MANUFACTURERS CODE: 29372
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314
NOMINAL THREAD DIAMETER: 0.138 INCHES
SURFACE TREATMENT: PASSIVATE SPRING PASSIVATE STAND-OFF PASSIVATE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STAND-OFF QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
~1: OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 SPRING STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP
~2: 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP
~3: 348 OR STEEL COMP 384 OR STEEL COMP 385 STAND-OFF STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR
~4: STEEL COMP 310 OR STEEL COMP 1054 OR STEEL COMP 1055 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 FASTENER
Related Searches:
247ASC1423-001
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305010085365
NSN
5305-01-008-5365
MFG
NAVAL AIR SYSTEMS COMMAND
Description
DESIGN CONTROL REFERENCE: CA29040-08-3-7P
HEAD DIAMETER: 0.300 INCHES NOMINAL
HEAD STYLE: C44 FILLISTER
MANUFACTURERS CODE: 29372
MATERIAL: STEEL CORROSION RESISTING SPRING STEEL CORROSION RESISTING STAND-OFF STEEL CORROSION RESISTING FASTENER
NOMINAL THREAD DIAMETER: 0.164 INCHES
SURFACE TREATMENT: PASSIVATE SPRING PASSIVATE STAND-OFF PASSIVATE FASTENER
THE MANUFACTURERS DATA:
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.310 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
CA2899-3-7P
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305010085365
NSN
5305-01-008-5365
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TRIDAIR PRODUCTS
Description
DESIGN CONTROL REFERENCE: CA29040-08-3-7P
HEAD DIAMETER: 0.300 INCHES NOMINAL
HEAD STYLE: C44 FILLISTER
MANUFACTURERS CODE: 29372
MATERIAL: STEEL CORROSION RESISTING SPRING STEEL CORROSION RESISTING STAND-OFF STEEL CORROSION RESISTING FASTENER
NOMINAL THREAD DIAMETER: 0.164 INCHES
SURFACE TREATMENT: PASSIVATE SPRING PASSIVATE STAND-OFF PASSIVATE FASTENER
THE MANUFACTURERS DATA:
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.310 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
CA29040-08-3-7P
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305010085365
NSN
5305-01-008-5365
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TRIDAIR PRODUCTS
Description
DESIGN CONTROL REFERENCE: CA29040-08-3-7P
HEAD DIAMETER: 0.300 INCHES NOMINAL
HEAD STYLE: C44 FILLISTER
MANUFACTURERS CODE: 29372
MATERIAL: STEEL CORROSION RESISTING SPRING STEEL CORROSION RESISTING STAND-OFF STEEL CORROSION RESISTING FASTENER
NOMINAL THREAD DIAMETER: 0.164 INCHES
SURFACE TREATMENT: PASSIVATE SPRING PASSIVATE STAND-OFF PASSIVATE FASTENER
THE MANUFACTURERS DATA:
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.310 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
AS185-1
SCREW,SHOULDER
NSN, MFG P/N
5305010085403
NSN
5305-01-008-5403
MFG
AVIBANK MFG. INC.
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 4.440 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH: 4.660 INCHES MINIMUM AND 4.676 INCHES MAXIMUM
HARDNESS RATING: 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 1.855 INCHES MINIMUM AND 1.875 INCHES MAXIMUM
HEAD HEIGHT: 0.490 INCHES NOMINAL
HEAD STYLE: C23 ROUND W/WRENCH FLATS
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: GM1010 COMP 4330FSCM 26512 MFR REF SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 1.250 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE
SHOULDER DIAMETER: 1.499 INCHES NOMINAL FIRST SHOULDER
SHOULDER LENGTH: 3.710 INCHES MINIMUM AND 3.736 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPE: ROUND FIRST SHOULDER
SPECIAL FEATURES: RETAINING ELEMENT IN SHANK
SURFACE TREATMENT: CHROMIUM OVERALL CHROMIUM GRIP CADMIUM THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-C-320 CLASS 2E FED SPEC SINGLE TREATMENT RESPONSE HEAD QQ-C-320 CL 2E FED SPEC SINGLE TREATMENT RESPONSE GRIP MIL-C-8837 TY2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE THREADS
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.779 INCHES NOMINAL
THREAD QUANTITY PER INCH: 12
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 1.610 INCHES MINIMUM AND 1.625 INCHES MAXIMUM
Related Searches:
CA27032-3090
SCREW,SHOULDER
NSN, MFG P/N
5305010085403
NSN
5305-01-008-5403
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TRIDAIR PRODUCTS
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 4.440 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH: 4.660 INCHES MINIMUM AND 4.676 INCHES MAXIMUM
HARDNESS RATING: 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 1.855 INCHES MINIMUM AND 1.875 INCHES MAXIMUM
HEAD HEIGHT: 0.490 INCHES NOMINAL
HEAD STYLE: C23 ROUND W/WRENCH FLATS
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: GM1010 COMP 4330FSCM 26512 MFR REF SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 1.250 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE
SHOULDER DIAMETER: 1.499 INCHES NOMINAL FIRST SHOULDER
SHOULDER LENGTH: 3.710 INCHES MINIMUM AND 3.736 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPE: ROUND FIRST SHOULDER
SPECIAL FEATURES: RETAINING ELEMENT IN SHANK
SURFACE TREATMENT: CHROMIUM OVERALL CHROMIUM GRIP CADMIUM THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-C-320 CLASS 2E FED SPEC SINGLE TREATMENT RESPONSE HEAD QQ-C-320 CL 2E FED SPEC SINGLE TREATMENT RESPONSE GRIP MIL-C-8837 TY2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE THREADS
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.779 INCHES NOMINAL
THREAD QUANTITY PER INCH: 12
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 1.610 INCHES MINIMUM AND 1.625 INCHES MAXIMUM
Related Searches:
GB511DB3090
SCREW,SHOULDER
NSN, MFG P/N
5305010085403
NSN
5305-01-008-5403
MFG
NORTHROP GRUMMAN SYSTEMS CORPORATION DIV NORTHROP GRUMMAN AEROSPACE SYSTEMS
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 4.440 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH: 4.660 INCHES MINIMUM AND 4.676 INCHES MAXIMUM
HARDNESS RATING: 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 1.855 INCHES MINIMUM AND 1.875 INCHES MAXIMUM
HEAD HEIGHT: 0.490 INCHES NOMINAL
HEAD STYLE: C23 ROUND W/WRENCH FLATS
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: GM1010 COMP 4330FSCM 26512 MFR REF SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 1.250 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE
SHOULDER DIAMETER: 1.499 INCHES NOMINAL FIRST SHOULDER
SHOULDER LENGTH: 3.710 INCHES MINIMUM AND 3.736 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPE: ROUND FIRST SHOULDER
SPECIAL FEATURES: RETAINING ELEMENT IN SHANK
SURFACE TREATMENT: CHROMIUM OVERALL CHROMIUM GRIP CADMIUM THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-C-320 CLASS 2E FED SPEC SINGLE TREATMENT RESPONSE HEAD QQ-C-320 CL 2E FED SPEC SINGLE TREATMENT RESPONSE GRIP MIL-C-8837 TY2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE THREADS
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.779 INCHES NOMINAL
THREAD QUANTITY PER INCH: 12
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 1.610 INCHES MINIMUM AND 1.625 INCHES MAXIMUM
Related Searches:
AS204
SCREW,SHOULDER
NSN, MFG P/N
5305010085404
NSN
5305-01-008-5404
MFG
AVIBANK MFG. INC.
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 2.490 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH: 2.670 INCHES MINIMUM AND 2.706 INCHES MAXIMUM
HARDNESS RATING: 39.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.990 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
HEAD HEIGHT: 0.312 INCHES NOMINAL
HEAD STYLE: C23 ROUND W/WRENCH FLATS
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.625 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE
SHOULDER DIAMETER: 0.749 INCHES NOMINAL FIRST SHOULDER
SHOULDER LENGTH: 2.120 INCHES MINIMUM AND 2.146 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPE: ROUND FIRST SHOULDER
SPECIAL FEATURES: RETAINING ELEMENT IN SHANK
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.555 INCHES NOMINAL
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.880 INCHES MINIMUM AND 0.888 INCHES MAXIMUM
Related Searches:
CA27031-1700
SCREW,SHOULDER
NSN, MFG P/N
5305010085404
NSN
5305-01-008-5404
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TRIDAIR PRODUCTS
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 2.490 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH: 2.670 INCHES MINIMUM AND 2.706 INCHES MAXIMUM
HARDNESS RATING: 39.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.990 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
HEAD HEIGHT: 0.312 INCHES NOMINAL
HEAD STYLE: C23 ROUND W/WRENCH FLATS
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.625 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE
SHOULDER DIAMETER: 0.749 INCHES NOMINAL FIRST SHOULDER
SHOULDER LENGTH: 2.120 INCHES MINIMUM AND 2.146 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPE: ROUND FIRST SHOULDER
SPECIAL FEATURES: RETAINING ELEMENT IN SHANK
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.555 INCHES NOMINAL
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.880 INCHES MINIMUM AND 0.888 INCHES MAXIMUM
Related Searches:
GB511CJ1700
SCREW,SHOULDER
NSN, MFG P/N
5305010085404
NSN
5305-01-008-5404
MFG
NORTHROP GRUMMAN SYSTEMS CORPORATION DIV NORTHROP GRUMMAN AEROSPACE SYSTEMS
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 2.490 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH: 2.670 INCHES MINIMUM AND 2.706 INCHES MAXIMUM
HARDNESS RATING: 39.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.990 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
HEAD HEIGHT: 0.312 INCHES NOMINAL
HEAD STYLE: C23 ROUND W/WRENCH FLATS
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.625 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE
SHOULDER DIAMETER: 0.749 INCHES NOMINAL FIRST SHOULDER
SHOULDER LENGTH: 2.120 INCHES MINIMUM AND 2.146 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPE: ROUND FIRST SHOULDER
SPECIAL FEATURES: RETAINING ELEMENT IN SHANK
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.555 INCHES NOMINAL
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.880 INCHES MINIMUM AND 0.888 INCHES MAXIMUM
Related Searches:
C387H4-15
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305010085407
NSN
5305-01-008-5407
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN DIV LOCKHEED MARTIN AERONAUTICS COMPANY
Description
COUNTERSINK ANGLE: 59.75 DEGREES MINIMUM AND 60.25 DEGREES MAXIMUM
FASTENER LENGTH: 1.300 INCHES MINIMUM AND 1.330 INCHES MAXIMUM
GRIP DIAMETER: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM
HEAD DIAMETER: 0.412 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP H11 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS6485 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: NICKEL AND CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS 2416 ASSN STD ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.352 INCHES MINIMUM AND 0.402 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
4149327P009
SCREW,MACHINE
NSN, MFG P/N
5305010086050
NSN
5305-01-008-6050
MFG
AMETEK INC. D IV AEROSPACE & DEFENSE
Description
DESIGN CONTROL REFERENCE: 4149327P009
FASTENER LENGTH: 0.422 INCHES NOMINAL
HEAD DIAMETER: 0.141 INCHES NOMINAL
HEAD HEIGHT: 0.025 INCHES MINIMUM AND 0.028 INCHES MAXIMUM
HEAD STYLE: A38 FLAT CHAMFER
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 97424
NOMINAL THREAD DIAMETER: 0.073 INCHES
SCREW MATERIAL: COPPER ALLOY
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626,COMP 22,1/2H FED SPEC SINGLE MATERIAL RESPONSE
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.394 INCHES MINIMUM
THREAD QUANTITY PER INCH: 72
THREAD SERIES DESIGNATOR: UNF
Related Searches:
4149327P9
SCREW,MACHINE
NSN, MFG P/N
5305010086050
NSN
5305-01-008-6050
MFG
AMETEK INC. D IV AEROSPACE & DEFENSE
Description
DESIGN CONTROL REFERENCE: 4149327P009
FASTENER LENGTH: 0.422 INCHES NOMINAL
HEAD DIAMETER: 0.141 INCHES NOMINAL
HEAD HEIGHT: 0.025 INCHES MINIMUM AND 0.028 INCHES MAXIMUM
HEAD STYLE: A38 FLAT CHAMFER
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 97424
NOMINAL THREAD DIAMETER: 0.073 INCHES
SCREW MATERIAL: COPPER ALLOY
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626,COMP 22,1/2H FED SPEC SINGLE MATERIAL RESPONSE
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.394 INCHES MINIMUM
THREAD QUANTITY PER INCH: 72
THREAD SERIES DESIGNATOR: UNF
Related Searches:
10279748
SCREW,MACHINE
NSN, MFG P/N
5305010086221
NSN
5305-01-008-6221
MFG
U S ARMY AVIATION AND MISSILE COMMAND
Description
DESIGN CONTROL REFERENCE: 10279748
FASTENER LENGTH: 0.750 INCHES NOMINAL
HEAD DIAMETER: 0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM
HEAD HEIGHT: 0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 18876
NOMINAL THREAD DIAMETER: 0.086 INCHES
SCREW MATERIAL: STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 309 OR STEEL COMP 310 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC ALL MATERIAL RESPONSES
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.750 INCHES NOMINAL
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNC
Related Searches:
DFP79005-10B3
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305010086405
NSN
5305-01-008-6405
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.535 INCHES NOMINAL
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 41.0 ROCKWELL C MAXIMUM FASTENER
HEAD DIAMETER: 0.300 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D2 CROSS RECESS TYPE II
MATERIAL: STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 347 OR STEEL COMP 348 STAND-OFF STEEL COMP 8740 FASTENER
MATERIAL ACCOMMODATED THICKNESS: 0.090 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-23195 MIL SPEC ALL MATERIAL RESPONSES STAND-OFF MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE FASTENER
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC