My Quote Request
5305-01-023-5838
20 Products
0.500-13UNC-3AX 0.625NICU
SETSCREW
NSN, MFG P/N
5305010235838
NSN
5305-01-023-5838
MFG
BOSCH REXROTH GMBH LOHMANN STOLTER OHT
Description
DEPARTURE FROM CITED DOCUMENT: AS MODIFIED BY MATERIAL
FASTENER LENGTH: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: NICKEL ALLOY 400 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-N-281,CLASS A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.500 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-200
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 4 STYLE
POINT STYLE: F20 CUP
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 13
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.250 INCHES NOMINAL
Related Searches:
FF-S-200
SETSCREW
NSN, MFG P/N
5305010235838
NSN
5305-01-023-5838
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
DEPARTURE FROM CITED DOCUMENT: AS MODIFIED BY MATERIAL
FASTENER LENGTH: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: NICKEL ALLOY 400 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-N-281,CLASS A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.500 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-200
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 4 STYLE
POINT STYLE: F20 CUP
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 13
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.250 INCHES NOMINAL
Related Searches:
655-590-2121
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305010235841
NSN
5305-01-023-5841
MFG
HONEYWELL INTERNATIONAL INC. DBA HONEYWELL DIV AEROSPACE - PHOENIX
Description
FASTENER LENGTH: 0.970 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
HOLE CONFIGURATION STYLE: E11 ROUND INTERNAL HEXAGON
HOLE DIAMETER: 0.047 INCHES NOMINAL
HOLE QUANTITY: 6
HOLE TYPE: DRILLED
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.899 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.187 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
Related Searches:
655-590-9121
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305010235841
NSN
5305-01-023-5841
MFG
HONEYWELL INTERNATIONAL INC. DBA HONEYWELL DIV AEROSPACE - PHOENIX
Description
FASTENER LENGTH: 0.970 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
HOLE CONFIGURATION STYLE: E11 ROUND INTERNAL HEXAGON
HOLE DIAMETER: 0.047 INCHES NOMINAL
HOLE QUANTITY: 6
HOLE TYPE: DRILLED
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.899 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.187 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
Related Searches:
68069-4-16D
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305010235841
NSN
5305-01-023-5841
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
FASTENER LENGTH: 0.970 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
HOLE CONFIGURATION STYLE: E11 ROUND INTERNAL HEXAGON
HOLE DIAMETER: 0.047 INCHES NOMINAL
HOLE QUANTITY: 6
HOLE TYPE: DRILLED
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.899 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.187 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
Related Searches:
NAS668V6HT
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305010235844
NSN
5305-01-023-5844
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 1.095 INCHES MINIMUM AND 1.125 INCHES MAXIMUM
GRIP DIAMETER: 0.4990 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM
GRIP LENGTH: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD DIAMETER: 0.951 INCHES MINIMUM AND 1.014 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: TITANIUM ALLOY UNS R54520 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: NAS621,COMP 6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.500 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS668 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.710 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
810071
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305010236178
NSN
5305-01-023-6178
810071
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305010236178
NSN
5305-01-023-6178
MFG
BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC.
Description
DESIGN CONTROL REFERENCE: 810071
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.399 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 0.540 INCHES NOMINAL
FIRST DIAMETER FROM HEAD: 0.070 INCHES NOMINAL
HEAD HEIGHT: 0.075 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
INTERNAL DRIVE STYLE: D14 SLOT
MANUFACTURERS CODE: 80249
MATERIAL: STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.112 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.141 INCHES NOMINAL
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.250 INCHES NOMINAL
Related Searches:
810072
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305010236184
NSN
5305-01-023-6184
810072
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305010236184
NSN
5305-01-023-6184
MFG
BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC.
Description
DESIGN CONTROL REFERENCE: 810072
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.363 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 0.550 INCHES NOMINAL
FIRST DIAMETER FROM HEAD: 0.078 INCHES NOMINAL
HEAD HEIGHT: 0.075 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
INTERNAL DRIVE STYLE: D14 SLOT
MANUFACTURERS CODE: 80249
MATERIAL: STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.138 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.187 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.250 INCHES NOMINAL
Related Searches:
MS27039-4-38
SCREW,MACHINE
NSN, MFG P/N
5305010236202
NSN
5305-01-023-6202
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 2.391 INCHES MINIMUM AND 2.438 INCHES MAXIMUM
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.473 INCHES MINIMUM AND 0.492 INCHES MAXIMUM
HEAD HEIGHT: 0.162 INCHES MINIMUM AND 0.175 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SCREW MATERIAL: STEEL COMP 1340 OR STEEL COMP 4037
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MILS-16974 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-8695 MIL SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-46,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.499 INCHES MINIMUM AND 0.578 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
MS27039-4-38
SCREW,MACHINE
NSN, MFG P/N
5305010236202
NSN
5305-01-023-6202
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
FASTENER LENGTH: 2.391 INCHES MINIMUM AND 2.438 INCHES MAXIMUM
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.473 INCHES MINIMUM AND 0.492 INCHES MAXIMUM
HEAD HEIGHT: 0.162 INCHES MINIMUM AND 0.175 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SCREW MATERIAL: STEEL COMP 1340 OR STEEL COMP 4037
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MILS-16974 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-8695 MIL SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-46,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.499 INCHES MINIMUM AND 0.578 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
MS27039-4-58
SCREW,MACHINE
NSN, MFG P/N
5305010236202
NSN
5305-01-023-6202
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 2.391 INCHES MINIMUM AND 2.438 INCHES MAXIMUM
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.473 INCHES MINIMUM AND 0.492 INCHES MAXIMUM
HEAD HEIGHT: 0.162 INCHES MINIMUM AND 0.175 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SCREW MATERIAL: STEEL COMP 1340 OR STEEL COMP 4037
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MILS-16974 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-8695 MIL SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-46,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.499 INCHES MINIMUM AND 0.578 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
NAS1124-26
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305010236211
NSN
5305-01-023-6211
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 1.926 INCHES MINIMUM AND 1.956 INCHES MAXIMUM
GRIP DIAMETER: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 1.615 INCHES MINIMUM AND 1.635 INCHES MAXIMUM
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.133 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 125.0 MICROINCHES TOP OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.291 INCHES MINIMUM AND 0.341 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
322009-05
SCREW,MACHINE
NSN, MFG P/N
5305010236222
NSN
5305-01-023-6222
MFG
TRANSICO INC. DBA EECO SWITCH
Description
FASTENER LENGTH: 0.500 INCHES NOMINAL
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
NAS662C2-5
SCREW,MACHINE
NSN, MFG P/N
5305010236227
NSN
5305-01-023-6227
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 0.282 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
HEAD DIAMETER: 0.156 INCHES MINIMUM AND 0.172 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B10 SLOT
MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.086 INCHES
SCREW MATERIAL: STEEL COMP 304L OR STEEL COMP 316L OR STEEL COMP 302 OR STEEL COMP 347 OR STEEL COMP 321 OR STEEL COMP 317 OR STEEL COMP 316 OR STEEL COMP 310 OR STEEL COMP 309 OR STEEL COMP 305 OR STEEL COMP 304
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPECIFICATION/STANDARD DATA: 80205-NAS662 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.210 INCHES MINIMUM AND 0.282 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNC
Related Searches:
NAS1635-04-2
SCREW,MACHINE
NSN, MFG P/N
5305010236233
NSN
5305-01-023-6233
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.095 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD DIAMETER: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
HEAD HEIGHT: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE
SPECIFICATION/STANDARD DATA: 80205-NAS1635 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.045 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
AN505-10R15
SCREW,MACHINE
NSN, MFG P/N
5305010236235
NSN
5305-01-023-6235
MFG
AIR FORCE-NAVY AERONAUTICAL SPECIFICATIONS PROMULGATED BY AERONAUTICAL STANDARDS GROUP
Description
COUNTERSINK ANGLE: 82.0 DEGREES NOMINAL
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN505-10R15
FASTENER LENGTH: 0.906 INCHES MINIMUM AND 0.937 INCHES MAXIMUM
HEAD DIAMETER: 0.348 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 81352
MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-92
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 2C STYLE
SCREW MATERIAL: STEEL COMP 1010
SCREW SURFACE TREATMENT: CADMIUM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.708 INCHES MINIMUM AND 0.840 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
Related Searches:
FF-S-92
SCREW,MACHINE
NSN, MFG P/N
5305010236235
NSN
5305-01-023-6235
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
COUNTERSINK ANGLE: 82.0 DEGREES NOMINAL
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN505-10R15
FASTENER LENGTH: 0.906 INCHES MINIMUM AND 0.937 INCHES MAXIMUM
HEAD DIAMETER: 0.348 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 81352
MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-92
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 2C STYLE
SCREW MATERIAL: STEEL COMP 1010
SCREW SURFACE TREATMENT: CADMIUM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.708 INCHES MINIMUM AND 0.840 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
Related Searches:
NAS1301C6-5
SCREW,ASSEMBLED WASHER
NSN, MFG P/N
5305010236238
NSN
5305-01-023-6238
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.280 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
HEAD DIAMETER: 0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 430 OR STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 301 OR STEEL COMP 304 OR STEEL COMP 316 OR STEEL CORROSION RESISTING OVERALL
NOMINAL THREAD DIAMETER: 0.138 INCHES
PRIMARY WASHER MATERIAL THICKNESS: 0.031 INCHES NOMINAL
PRIMARY WASHER OUTSIDE DIAMETER: 0.253 INCHES NOMINAL
PRIMARY WASHER STYLE: G9 SPLIT HELICAL RING
SECONDARY WASHER MATERIAL THICKNESS: 0.013 INCHES MINIMUM AND 0.019 INCHES MAXIMUM
SECONDARY WASHER OUTSIDE DIAMETER: 0.253 INCHES MINIMUM AND 0.263 INCHES MAXIMUM
SECONDARY WASHER RELATIONSHIP TO PRIMARY WASHER: NOT IDENTICAL
SECONDARY WASHER STYLE: G30 FLAT
SPECIFICATION/STANDARD DATA: 80205-NAS1301 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.218 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
WASHER QUANTITY: 2
Related Searches:
330-1716-050
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305010236240
NSN
5305-01-023-6240
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
FASTENER LENGTH: 0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD DIAMETER: 0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM
HEAD HEIGHT: 0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
LOCKING FEATURE: PATCH THREADS
MATERIAL: STEEL CORROSION RESISTING OVERALL
NOMINAL THREAD DIAMETER: 0.086 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1635 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.309 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNC
Related Searches:
NAS1635-02LE6
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305010236240
NSN
5305-01-023-6240
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD DIAMETER: 0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM
HEAD HEIGHT: 0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
LOCKING FEATURE: PATCH THREADS
MATERIAL: STEEL CORROSION RESISTING OVERALL
NOMINAL THREAD DIAMETER: 0.086 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1635 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.309 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNC