My Quote Request
5305-01-033-8605
20 Products
LS15234-3-2
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305010338605
NSN
5305-01-033-8605
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN
Description
FASTENER LENGTH: 0.386 INCHES MINIMUM AND 0.416 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP E4340 OR STEEL COMP 4340 OR STEEL COMP 8740 OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
DCT7900-8B3
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305010338212
NSN
5305-01-033-8212
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS DIV HUCK PRODUCTS DIVISION
Description
DESIGN CONTROL REFERENCE: DCT7900-8B3
FASTENER LENGTH: 0.390 INCHES NOMINAL
HEAD DIAMETER: 0.314 INCHES NOMINAL
HEAD HEIGHT: 0.091 INCHES MINIMUM AND 0.111 INCHES MAXIMUM
HEAD STYLE: C33 PAN NO. 2
INTERNAL DRIVE STYLE: D14 SLOT
MANUFACTURERS CODE: 0HDW7
MATERIAL: ALUMINUM ALLOY 6061 STAND-OFF STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 FASTENER
MATERIAL ACCOMMODATED THICKNESS: 0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF ASTM A493 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
NOMINAL THREAD DIAMETER: 0.164 INCHES
SURFACE TREATMENT: ANODIZE STAND-OFF PASSIVATE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 TY 1 CL 1 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
DCT7900-8B3
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305010338212
NSN
5305-01-033-8212
MFG
HUCK INTL INC
Description
DESIGN CONTROL REFERENCE: DCT7900-8B3
FASTENER LENGTH: 0.390 INCHES NOMINAL
HEAD DIAMETER: 0.314 INCHES NOMINAL
HEAD HEIGHT: 0.091 INCHES MINIMUM AND 0.111 INCHES MAXIMUM
HEAD STYLE: C33 PAN NO. 2
INTERNAL DRIVE STYLE: D14 SLOT
MANUFACTURERS CODE: 0HDW7
MATERIAL: ALUMINUM ALLOY 6061 STAND-OFF STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 FASTENER
MATERIAL ACCOMMODATED THICKNESS: 0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF ASTM A493 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
NOMINAL THREAD DIAMETER: 0.164 INCHES
SURFACE TREATMENT: ANODIZE STAND-OFF PASSIVATE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 TY 1 CL 1 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
NAS602-37P
SCREW,MACHINE
NSN, MFG P/N
5305010338598
NSN
5305-01-033-8598
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 2.222 INCHES MINIMUM AND 2.312 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD HEIGHT: 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
SCREW MATERIAL: STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE
SPECIFICATION/STANDARD DATA: 80205-NAS602 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.750 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
107256-1033
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305010338600
NSN
5305-01-033-8600
MFG
RAYTHEON COMPANY DBA RAYTHEON
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD DIAMETER: 0.238 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
LOCKING FEATURE: PATCH THREADS
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.128 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
~1: OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OVERALL
Related Searches:
17606-2
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305010338600
NSN
5305-01-033-8600
MFG
NAVAL ELECTRONIC SYSTEMS SECURITY ENGINEERING CENTER
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD DIAMETER: 0.238 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
LOCKING FEATURE: PATCH THREADS
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.128 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
~1: OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OVERALL
Related Searches:
330-1719-470
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305010338600
NSN
5305-01-033-8600
MFG
AMERACE CORP ESNA DIV
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD DIAMETER: 0.238 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
LOCKING FEATURE: PATCH THREADS
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.128 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
~1: OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OVERALL
Related Searches:
330-1719-470
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305010338600
NSN
5305-01-033-8600
MFG
ROCKWELL COLLINS INC. DBA GOVERNMENT SYSTEMS DIV GOVERNMENT SYSTEMS
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD DIAMETER: 0.238 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
LOCKING FEATURE: PATCH THREADS
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.128 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
~1: OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OVERALL
Related Searches:
LL57G62P4
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305010338600
NSN
5305-01-033-8600
MFG
LONG-LOK FASTENERS CORPORATION
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD DIAMETER: 0.238 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
LOCKING FEATURE: PATCH THREADS
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.128 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
~1: OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OVERALL
Related Searches:
P39CR632R4E
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305010338600
NSN
5305-01-033-8600
MFG
NYLOK CORPORATION DBA NYLOK WESTERN FASTENER DIV NYLOK WESTERN
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD DIAMETER: 0.238 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
LOCKING FEATURE: PATCH THREADS
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.128 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
~1: OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OVERALL
Related Searches:
FF-S-107
SCREW,TAPPING
NSN, MFG P/N
5305010338601
NSN
5305-01-033-8601
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
COUNTERSINK ANGLE: 81.0 DEGREES NOMINAL
DEPARTURE FROM CITED DESIGNATOR: AS MODIFIED BY MATERIAL
FASTENER LENGTH: 1.000 INCHES NOMINAL
HEAD DIAMETER: 0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D14 SLOT
MANUFACTURERS CODE: 81348
MATERIAL: STEEL COMP 304 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 ASSN STD ALL MATERIAL RESPONSES OVERALL
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-107
NONDEFINITIVE SPEC/STD DATA: AB TYPE
NONMACHINE NOMINAL THREAD DIAMETER: 0.164 INCHES
NONMACHINE THREAD STYLE: A13 GIMLET POINT (TYPE A, AB OR BA)
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Related Searches:
33000-0390
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305010338604
NSN
5305-01-033-8604
MFG
BOSCH REXROTH GMBH LOHMANN STOLTER OHT
Description
FASTENER LENGTH: 5.812 INCHES MINIMUM AND 6.000 INCHES MAXIMUM
HEAD HEIGHT: 0.902 INCHES MINIMUM AND 0.974 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE J429 GRADE 8 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A354 GRADE BD ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 150000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 1.500 INCHES
SURFACE FINISH: 63.0 MICROINCHES THREADS
SURFACE TREATMENT: ZINC AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 3.250 INCHES MINIMUM AND 3.666 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 6
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 2.175 INCHES MINIMUM AND 2.250 INCHES MAXIMUM
Related Searches:
33000-0390
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305010338604
NSN
5305-01-033-8604
MFG
BOSCH REXROTH GMBH LOHMANN STOLTER OHT
Description
FASTENER LENGTH: 5.812 INCHES MINIMUM AND 6.000 INCHES MAXIMUM
HEAD HEIGHT: 0.902 INCHES MINIMUM AND 0.974 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE J429 GRADE 8 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A354 GRADE BD ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 150000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 1.500 INCHES
SURFACE FINISH: 63.0 MICROINCHES THREADS
SURFACE TREATMENT: ZINC AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 3.250 INCHES MINIMUM AND 3.666 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 6
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 2.175 INCHES MINIMUM AND 2.250 INCHES MAXIMUM
Related Searches:
B1821BH150C600N
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305010338604
NSN
5305-01-033-8604
B1821BH150C600N
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305010338604
NSN
5305-01-033-8604
MFG
AMERICAN NATIONAL STANDARDS INSTITUTE DBA A N S I
Description
FASTENER LENGTH: 5.812 INCHES MINIMUM AND 6.000 INCHES MAXIMUM
HEAD HEIGHT: 0.902 INCHES MINIMUM AND 0.974 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE J429 GRADE 8 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A354 GRADE BD ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 150000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 1.500 INCHES
SURFACE FINISH: 63.0 MICROINCHES THREADS
SURFACE TREATMENT: ZINC AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 3.250 INCHES MINIMUM AND 3.666 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 6
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 2.175 INCHES MINIMUM AND 2.250 INCHES MAXIMUM
Related Searches:
B1821BH150C600N
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305010338604
NSN
5305-01-033-8604
B1821BH150C600N
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305010338604
NSN
5305-01-033-8604
MFG
AMERICAN NATIONAL STANDARDS INSTITUTE DBA A N S I
Description
FASTENER LENGTH: 5.812 INCHES MINIMUM AND 6.000 INCHES MAXIMUM
HEAD HEIGHT: 0.902 INCHES MINIMUM AND 0.974 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE J429 GRADE 8 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A354 GRADE BD ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 150000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 1.500 INCHES
SURFACE FINISH: 63.0 MICROINCHES THREADS
SURFACE TREATMENT: ZINC AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 3.250 INCHES MINIMUM AND 3.666 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 6
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 2.175 INCHES MINIMUM AND 2.250 INCHES MAXIMUM
Related Searches:
MS90728-318
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305010338604
NSN
5305-01-033-8604
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
FASTENER LENGTH: 5.812 INCHES MINIMUM AND 6.000 INCHES MAXIMUM
HEAD HEIGHT: 0.902 INCHES MINIMUM AND 0.974 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE J429 GRADE 8 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A354 GRADE BD ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 150000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 1.500 INCHES
SURFACE FINISH: 63.0 MICROINCHES THREADS
SURFACE TREATMENT: ZINC AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 3.250 INCHES MINIMUM AND 3.666 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 6
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 2.175 INCHES MINIMUM AND 2.250 INCHES MAXIMUM
Related Searches:
MS90728-318
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305010338604
NSN
5305-01-033-8604
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
FASTENER LENGTH: 5.812 INCHES MINIMUM AND 6.000 INCHES MAXIMUM
HEAD HEIGHT: 0.902 INCHES MINIMUM AND 0.974 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE J429 GRADE 8 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A354 GRADE BD ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 150000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 1.500 INCHES
SURFACE FINISH: 63.0 MICROINCHES THREADS
SURFACE TREATMENT: ZINC AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 3.250 INCHES MINIMUM AND 3.666 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 6
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 2.175 INCHES MINIMUM AND 2.250 INCHES MAXIMUM
Related Searches:
LS15234-3-2
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305010338605
NSN
5305-01-033-8605
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
FASTENER LENGTH: 0.386 INCHES MINIMUM AND 0.416 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP E4340 OR STEEL COMP 4340 OR STEEL COMP 8740 OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
LS15234-3-2
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305010338605
NSN
5305-01-033-8605
MFG
HI-SHEAR CORPORATION
Description
FASTENER LENGTH: 0.386 INCHES MINIMUM AND 0.416 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP E4340 OR STEEL COMP 4340 OR STEEL COMP 8740 OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
LS15234-3-2
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305010338605
NSN
5305-01-033-8605
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
FASTENER LENGTH: 0.386 INCHES MINIMUM AND 0.416 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP E4340 OR STEEL COMP 4340 OR STEEL COMP 8740 OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF