My Quote Request
5305-01-056-6915
20 Products
581R984H04
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305010566915
NSN
5305-01-056-6915
MFG
NORTHROP GRUMMAN SYSTEMS CORPORATION DIV NORTHROP GRUMMAN SYSTEMS CORPORATION ELECTRONIC SYSTEMS
Description
FASTENER LENGTH: 0.622 INCHES MINIMUM AND 0.652 INCHES MAXIMUM
HEAD DIAMETER: 0.304 INCHES MINIMUM AND 0.324 INCHES MAXIMUM
HEAD HEIGHT: 0.100 INCHES MINIMUM AND 0.120 INCHES MAXIMUM
HEAD STYLE: C44 FILLISTER
III END ITEM IDENTIFICATION: E-3A AWACS
MANUFACTURERS CODE: 97942
MATERIAL: STEEL COMP 304 STAND-OFF STEEL CORROSION RESISTING FASTENER
MATERIAL ACCOMMODATED THICKNESS: 0.267 INCHES MINIMUM AND 0.328 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF AMS 5735 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5736 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
MFR SOURCE CONTROLLING REFERENCE: 581R984H04
MINIMUM TENSILE STRENGTH: 180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: W/CROSS RECESS DRIVE IN HEAD
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.170 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
BACB30LU5-4
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305010565452
NSN
5305-01-056-5452
MFG
PAUL R. BRILES INC. DBA PB FASTENERS
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 0.704 INCHES MINIMUM AND 0.734 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD DIAMETER: 0.574 INCHES MINIMUM AND 0.637 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP E4340 OR STEEL COMP 4340 OR STEEL COMP 8740 OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE FINISH: 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
BACB30LU5-4
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305010565452
NSN
5305-01-056-5452
MFG
SONIC INDUSTRIES INC.
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 0.704 INCHES MINIMUM AND 0.734 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD DIAMETER: 0.574 INCHES MINIMUM AND 0.637 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP E4340 OR STEEL COMP 4340 OR STEEL COMP 8740 OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE FINISH: 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
BACB30LU5-4
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305010565452
NSN
5305-01-056-5452
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 0.704 INCHES MINIMUM AND 0.734 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD DIAMETER: 0.574 INCHES MINIMUM AND 0.637 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP E4340 OR STEEL COMP 4340 OR STEEL COMP 8740 OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE FINISH: 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
BACB30LU5-4
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305010565452
NSN
5305-01-056-5452
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 0.704 INCHES MINIMUM AND 0.734 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD DIAMETER: 0.574 INCHES MINIMUM AND 0.637 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP E4340 OR STEEL COMP 4340 OR STEEL COMP 8740 OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE FINISH: 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
BACB30LU5-4
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305010565452
NSN
5305-01-056-5452
MFG
THE BOEING COMPANY DBA BOEING
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 0.704 INCHES MINIMUM AND 0.734 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD DIAMETER: 0.574 INCHES MINIMUM AND 0.637 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP E4340 OR STEEL COMP 4340 OR STEEL COMP 8740 OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE FINISH: 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
BACB30LU5-4
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305010565452
NSN
5305-01-056-5452
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 0.704 INCHES MINIMUM AND 0.734 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD DIAMETER: 0.574 INCHES MINIMUM AND 0.637 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP E4340 OR STEEL COMP 4340 OR STEEL COMP 8740 OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE FINISH: 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
BACB30LU5-4
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305010565452
NSN
5305-01-056-5452
MFG
HUCK INTL INC
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 0.704 INCHES MINIMUM AND 0.734 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD DIAMETER: 0.574 INCHES MINIMUM AND 0.637 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP E4340 OR STEEL COMP 4340 OR STEEL COMP 8740 OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE FINISH: 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
109430-3031
SCREW,MACHINE
NSN, MFG P/N
5305010566568
NSN
5305-01-056-6568
MFG
RAYTHEON COMPANY DBA RAYTHEON
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
DESIGN CONTROL REFERENCE: 109430-3031
FASTENER LENGTH: 0.625 INCHES NOMINAL
HEAD DIAMETER: 0.257 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B2 CROSS RECESS TYPE II
MANUFACTURERS CODE: 37695
MINIMUM TENSILE STRENGTH: 85000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AISI 302 ASSN STD 1ST MATERIAL RESPONSE OR AISI 303 ASSN STD 2ND MATERIAL RESPONSE OR AISI 304 ASSN STD 3RD MATERIAL RESPONSE
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.565 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
10-53179
SCREW,ASSEMBLED WASHER
NSN, MFG P/N
5305010566569
NSN
5305-01-056-6569
MFG
TELEDYNE CONTINENTAL MOTORS INC.
Description
DESIGN CONTROL REFERENCE: 10-53179
FASTENER LENGTH: 0.615 INCHES MINIMUM AND 0.645 INCHES MAXIMUM
HEAD DIAMETER: 0.187 INCHES MINIMUM AND 0.205 INCHES MAXIMUM
HEAD HEIGHT: 0.095 INCHES MINIMUM AND 0.120 INCHES MAXIMUM
HEAD STYLE: C44 FILLISTER
MANUFACTURERS CODE: 0PYA5
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD LENGTH: 0.535 INCHES MINIMUM AND 0.565 INCHES MAXIMUM
WASHER QUANTITY: 1
Related Searches:
10-53179
SCREW,ASSEMBLED WASHER
NSN, MFG P/N
5305010566569
NSN
5305-01-056-6569
MFG
SATAIR A/S
Description
DESIGN CONTROL REFERENCE: 10-53179
FASTENER LENGTH: 0.615 INCHES MINIMUM AND 0.645 INCHES MAXIMUM
HEAD DIAMETER: 0.187 INCHES MINIMUM AND 0.205 INCHES MAXIMUM
HEAD HEIGHT: 0.095 INCHES MINIMUM AND 0.120 INCHES MAXIMUM
HEAD STYLE: C44 FILLISTER
MANUFACTURERS CODE: 0PYA5
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD LENGTH: 0.535 INCHES MINIMUM AND 0.565 INCHES MAXIMUM
WASHER QUANTITY: 1
Related Searches:
10-53179
SCREW,ASSEMBLED WASHER
NSN, MFG P/N
5305010566569
NSN
5305-01-056-6569
MFG
UNISON INDUSTRIES LLC
Description
DESIGN CONTROL REFERENCE: 10-53179
FASTENER LENGTH: 0.615 INCHES MINIMUM AND 0.645 INCHES MAXIMUM
HEAD DIAMETER: 0.187 INCHES MINIMUM AND 0.205 INCHES MAXIMUM
HEAD HEIGHT: 0.095 INCHES MINIMUM AND 0.120 INCHES MAXIMUM
HEAD STYLE: C44 FILLISTER
MANUFACTURERS CODE: 0PYA5
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD LENGTH: 0.535 INCHES MINIMUM AND 0.565 INCHES MAXIMUM
WASHER QUANTITY: 1
Related Searches:
10-53179
SCREW,ASSEMBLED WASHER
NSN, MFG P/N
5305010566569
NSN
5305-01-056-6569
MFG
AMPHENOL CORPORATION DBA AMPHENOL AEROSPACE INDUSTRIAL
Description
DESIGN CONTROL REFERENCE: 10-53179
FASTENER LENGTH: 0.615 INCHES MINIMUM AND 0.645 INCHES MAXIMUM
HEAD DIAMETER: 0.187 INCHES MINIMUM AND 0.205 INCHES MAXIMUM
HEAD HEIGHT: 0.095 INCHES MINIMUM AND 0.120 INCHES MAXIMUM
HEAD STYLE: C44 FILLISTER
MANUFACTURERS CODE: 0PYA5
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD LENGTH: 0.535 INCHES MINIMUM AND 0.565 INCHES MAXIMUM
WASHER QUANTITY: 1
Related Searches:
10-53179
SCREW,ASSEMBLED WASHER
NSN, MFG P/N
5305010566569
NSN
5305-01-056-6569
MFG
BENDIX CORP THE BENDIX INTERNATIONAL DIV
Description
DESIGN CONTROL REFERENCE: 10-53179
FASTENER LENGTH: 0.615 INCHES MINIMUM AND 0.645 INCHES MAXIMUM
HEAD DIAMETER: 0.187 INCHES MINIMUM AND 0.205 INCHES MAXIMUM
HEAD HEIGHT: 0.095 INCHES MINIMUM AND 0.120 INCHES MAXIMUM
HEAD STYLE: C44 FILLISTER
MANUFACTURERS CODE: 0PYA5
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD LENGTH: 0.535 INCHES MINIMUM AND 0.565 INCHES MAXIMUM
WASHER QUANTITY: 1
Related Searches:
72528
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305010566570
NSN
5305-01-056-6570
MFG
PARKER-HANNIFIN CORPORATION DBA CONTROL SYSTEMS DIVISION DIV CONTROL SYSTEMS DIVISION - MILITARY
Description
DESIGN CONTROL REFERENCE: 72528
FASTENER LENGTH: 0.437 INCHES NOMINAL
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
HEAD HEIGHT: 0.121 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
LOCKING FEATURE: PELLET THREADS
MANUFACTURERS CODE: 82106
MATERIAL: STEEL OVERALL
MINIMUM TENSILE STRENGTH: 170000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.125 INCHES
SURFACE TREATMENT: OXIDE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924 CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.167 INCHES NOMINAL
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM
Related Searches:
72528
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305010566570
NSN
5305-01-056-6570
MFG
PARKER-HANNIFIN CORPORATION DBA HYDRAULIC SYSTEMS DIVISION DIV HYDRAULIC SYSTEMS DIVISION
Description
DESIGN CONTROL REFERENCE: 72528
FASTENER LENGTH: 0.437 INCHES NOMINAL
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
HEAD HEIGHT: 0.121 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
LOCKING FEATURE: PELLET THREADS
MANUFACTURERS CODE: 82106
MATERIAL: STEEL OVERALL
MINIMUM TENSILE STRENGTH: 170000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.125 INCHES
SURFACE TREATMENT: OXIDE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924 CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.167 INCHES NOMINAL
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM
Related Searches:
3833197-1
SETSCREW
NSN, MFG P/N
5305010566572
NSN
5305-01-056-6572
MFG
PARKER-HANNIFIN CORPORATION DBA HYDRAULIC SYSTEMS DIVISION DIV HYDRAULIC SYSTEMS DIVISION
Description
DESIGN CONTROL REFERENCE: 3833197-1
FASTENER LENGTH: 0.102 INCHES MINIMUM AND 0.122 INCHES MAXIMUM
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D7 SIX SPLINE
LOCKING FEATURE: STRIP THREADS
MANUFACTURERS CODE: 93835
MATERIAL: STEEL COMP 303 OR STEEL COMP 303SE FASTENER
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD ALL MATERIAL RESPONSES FASTENER
NOMINAL THREAD DIAMETER: 0.112 INCHES
POINT STYLE: F20 CUP
SPLINE MAJOR DIAMETER: 0.061 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
SPLINE MINOR DIAMETER: 0.051 INCHES MINIMUM AND 0.052 INCHES MAXIMUM
SPLINE WIDTH: 0.013 INCHES MINIMUM AND 0.014 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.102 INCHES MINIMUM AND 0.122 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
661458-17
THUMBSCREW
NSN, MFG P/N
5305010566573
NSN
5305-01-056-6573
MFG
DRS SUSTAINMENT SYSTEMS INC. DIV DRS SUSTAINMENT SYSTEMS INC. USE CAGE CODE 98255 FOR CATALOGING.
Description
DESIGN CONTROL REFERENCE: 661458-17
HEAD STYLE: C66 KNURLED NO. 1
MANUFACTURERS CODE: 20418
SPECIAL FEATURES: 0.062 IN. DIA HOLE IN SHANK 0.300 IN. FROM THD END
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THE MANUFACTURERS DATA:
THREAD DIRECTION: RIGHT-HAND
Related Searches:
3833148-1
SCREW,BALL,DRIVE
NSN, MFG P/N
5305010566894
NSN
5305-01-056-6894
MFG
PARKER-HANNIFIN CORPORATION DBA CONTROL SYSTEMS DIVISION DIV CONTROL SYSTEMS DIVISION - MILITARY
Description
DESIGN CONTROL REFERENCE: 3833148-1
GENERAL CHARACTERISTICS ITEM DESCRIPTION: 0.190-32 UNJF-3A THD,CRES QQ-S-763 COMP 420,PASSIVATED,0.892 IN. O/A LG,HEX SOCKET DRIVE
MANUFACTURERS CODE: 82106
THE MANUFACTURERS DATA:
Related Searches:
581R984H04
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305010566915
NSN
5305-01-056-6915
MFG
FASTENER TECHNOLOGY CORP
Description
FASTENER LENGTH: 0.622 INCHES MINIMUM AND 0.652 INCHES MAXIMUM
HEAD DIAMETER: 0.304 INCHES MINIMUM AND 0.324 INCHES MAXIMUM
HEAD HEIGHT: 0.100 INCHES MINIMUM AND 0.120 INCHES MAXIMUM
HEAD STYLE: C44 FILLISTER
III END ITEM IDENTIFICATION: E-3A AWACS
MANUFACTURERS CODE: 97942
MATERIAL: STEEL COMP 304 STAND-OFF STEEL CORROSION RESISTING FASTENER
MATERIAL ACCOMMODATED THICKNESS: 0.267 INCHES MINIMUM AND 0.328 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF AMS 5735 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5736 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
MFR SOURCE CONTROLLING REFERENCE: 581R984H04
MINIMUM TENSILE STRENGTH: 180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: W/CROSS RECESS DRIVE IN HEAD
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.170 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC