My Quote Request
5305-01-087-2601
20 Products
40336
SCREW,MACHINE
NSN, MFG P/N
5305010872601
NSN
5305-01-087-2601
MFG
BOSCH REXROTH GMBH LOHMANN STOLTER OHT
Description
FASTENER LENGTH: 0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
HEAD HEIGHT: 0.096 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
HEAD STYLE: A1 HEXAGON
INTERNAL DRIVE STYLE: B10 SLOT
NOMINAL THREAD DIAMETER: 0.164 INCHES
SCREW MATERIAL: STEEL COMP 303 OR STEEL COMP 410 OR STEEL COMP 416
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD 1ST MATERIAL RESPONSE OR AISI ASSN STD 2ND MATERIAL RESPONSE OR AISI ASSN STD 3RD MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.689 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
Related Searches:
MS51849-56C
SCREW,MACHINE
NSN, MFG P/N
5305010872601
NSN
5305-01-087-2601
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
FASTENER LENGTH: 0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
HEAD HEIGHT: 0.096 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
HEAD STYLE: A1 HEXAGON
INTERNAL DRIVE STYLE: B10 SLOT
NOMINAL THREAD DIAMETER: 0.164 INCHES
SCREW MATERIAL: STEEL COMP 303 OR STEEL COMP 410 OR STEEL COMP 416
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD 1ST MATERIAL RESPONSE OR AISI ASSN STD 2ND MATERIAL RESPONSE OR AISI ASSN STD 3RD MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.689 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
Related Searches:
SM-D-766931-35
SCREW,MACHINE
NSN, MFG P/N
5305010872601
NSN
5305-01-087-2601
MFG
US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR
Description
FASTENER LENGTH: 0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
HEAD HEIGHT: 0.096 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
HEAD STYLE: A1 HEXAGON
INTERNAL DRIVE STYLE: B10 SLOT
NOMINAL THREAD DIAMETER: 0.164 INCHES
SCREW MATERIAL: STEEL COMP 303 OR STEEL COMP 410 OR STEEL COMP 416
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD 1ST MATERIAL RESPONSE OR AISI ASSN STD 2ND MATERIAL RESPONSE OR AISI ASSN STD 3RD MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.689 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
Related Searches:
B46306P1
THUMBSCREW
NSN, MFG P/N
5305010872602
NSN
5305-01-087-2602
MFG
C SYSTEMS LLC DBA CRAIG SYSTEMS DBA EASTERN TECHNOLOGIES
Description
DESIGN CONTROL REFERENCE: B46306P1
FASTENER LENGTH: 2.375 INCHES NOMINAL
HEAD STYLE: C80 THUMB NO. 4
MANUFACTURERS CODE: 088A2
NOMINAL THREAD DIAMETER: 0.250 INCHES
POINT STYLE: F19 FLAT
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 1.000 INCHES NOMINAL
Related Searches:
12-11-613-11
SCREW,PANEL FASTENER
NSN, MFG P/N
5305010872605
NSN
5305-01-087-2605
MFG
SOUTHCO INC.
Description
FASTENER LENGTH: 1.091 INCHES NOMINAL
HEAD DIAMETER: 0.500 INCHES NOMINAL
HEAD HEIGHT: 0.109 INCHES NOMINAL
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.230 INCHES
SPECIAL FEATURES: FURNISHED WITH WASHER
SURFACE TREATMENT: CADMIUM OVERALL
THREAD LENGTH: 0.303 INCHES NOMINAL
THREAD SERIES DESIGNATOR: SQUARE
Related Searches:
12-11-613-11
SCREW,PANEL FASTENER
NSN, MFG P/N
5305010872605
NSN
5305-01-087-2605
MFG
SOUTHCO INC.
Description
FASTENER LENGTH: 1.091 INCHES NOMINAL
HEAD DIAMETER: 0.500 INCHES NOMINAL
HEAD HEIGHT: 0.109 INCHES NOMINAL
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.230 INCHES
SPECIAL FEATURES: FURNISHED WITH WASHER
SURFACE TREATMENT: CADMIUM OVERALL
THREAD LENGTH: 0.303 INCHES NOMINAL
THREAD SERIES DESIGNATOR: SQUARE
Related Searches:
48343520010
SCREW
NSN, MFG P/N
5305010873011
NSN
5305-01-087-3011
MFG
KOLLSMAN INC.
Description
SCREW
Related Searches:
HD4011
SCREW ASSORTMENT
NSN, MFG P/N
5305010873015
NSN
5305-01-087-3015
MFG
TATTNALL COUNTY OF DBA TATTNALL COUNTY SHERIFFS OFFICE
Description
COMPONENT DOCUMENT ORIGIN: INDUSTRIAL
COMPONENT DOCUMENT PAGE NUMBER: 91
COMPONENT QUANTITY: 80
DOCUMENT IDENTIFICATION: HD-4011
DOCUMENT SOURCE: 92219
DOCUMENT TYPE: CATALOG SHEET
Related Searches:
769762-1
SCREW MODIFIED
NSN, MFG P/N
5305010873033
NSN
5305-01-087-3033
MFG
HAMILTON SUNDSTRAND CORPORATION
Description
SCREW MODIFIED
Related Searches:
SC-C-706141
THUMBSCREW
NSN, MFG P/N
5305010873102
NSN
5305-01-087-3102
MFG
US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR
Description
DESIGN CONTROL REFERENCE: SC-C-706141
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.511 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 0.750 INCHES NOMINAL
FEATURES PROVIDED: FINISHED HEAD
FIRST DIAMETER FROM HEAD: 0.208 INCHES MINIMUM AND 0.212 INCHES MAXIMUM
HEAD HEIGHT: 0.880 INCHES NOMINAL
HEAD STYLE: C80 THUMB NO. 4
MANUFACTURERS CODE: 80063
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SC-A-706376-80063 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
POINT CHAMFER ANGLE: 45.0 DEGREES NOMINAL
POINT LENGTH: 0.032 INCHES NOMINAL
POINT STYLE: F1 FLAT
SHOULDER LENGTH: 1.000 INCHES NOMINAL OVERALL
SHOULDER SHAPE: SQUARE OVERALL
SHOULDER WIDTH ACROSS FLATS: 0.390 INCHES NOMINAL OVERALL
SURFACE TREATMENT: ENAMEL OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2 MFR REF SINGLE TREATMENT RESPONSE OVERALL
TEST DATA DOCUMENT: 80063-SC-A-706141 DRAWING
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES NOMINAL
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 1.000 INCHES NOMINAL
Related Searches:
9000501-55
SCREW,MACHINE
NSN, MFG P/N
5305010873121
NSN
5305-01-087-3121
MFG
HITCO CARBON COMPOSITES INC.
Description
SCREW,MACHINE
Related Searches:
G42-5
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305010873179
NSN
5305-01-087-3179
MFG
HOFFMAN ENGINEERING CORPORATION
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.310 INCHES MINIMUM AND 0.320 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 0.535 INCHES MINIMUM AND 0.555 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD: 0.084 INCHES MINIMUM AND 0.089 INCHES MAXIMUM
HEAD DIAMETER: 0.250 INCHES MINIMUM AND 0.280 INCHES MAXIMUM
HEAD HEIGHT: 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL CORROSION RESISTING OVERALL
NOMINAL THREAD DIAMETER: 0.138 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.225 INCHES MINIMUM AND 0.235 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
7S14CN632-16A
SCREW,MACHINE
NSN, MFG P/N
5305010873181
NSN
5305-01-087-3181
MFG
BOEING COMPANY THE DBA BOEING
Description
DESIGN CONTROL REFERENCE: 7S14CN632-16A
FASTENER LENGTH: 0.985 INCHES MINIMUM AND 1.032 INCHES MAXIMUM
HEAD DIAMETER: 0.264 INCHES MINIMUM AND 0.276 INCHES MAXIMUM
HEAD HEIGHT: 0.074 INCHES MINIMUM AND 0.086 INCHES MAXIMUM
HEAD STYLE: A28 ROUND
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 43999
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: STEEL COMP 385
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: CARPENTER NO 10,FSCM 43999 MFR REF SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.921 INCHES MINIMUM AND 1.032 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
4177188-26
SCREW,MACHINE
NSN, MFG P/N
5305010873182
NSN
5305-01-087-3182
MFG
BOSCH REXROTH GMBH LOHMANN STOLTER OHT
Description
SCREW,MACHINE
Related Searches:
FF-S-92
SCREW,MACHINE
NSN, MFG P/N
5305010873182
NSN
5305-01-087-3182
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
SCREW,MACHINE
Related Searches:
MS51849-36
SCREW,MACHINE
NSN, MFG P/N
5305010873182
NSN
5305-01-087-3182
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
SCREW,MACHINE
Related Searches:
MS51849-36
SCREW,MACHINE
NSN, MFG P/N
5305010873182
NSN
5305-01-087-3182
MFG
NACCO MATERIALS HANDLING GROUP INC DBA HYSTER
Description
SCREW,MACHINE
Related Searches:
321862-16
SCREW,MACHINE
NSN, MFG P/N
5305010873183
NSN
5305-01-087-3183
MFG
RAYTHEON COMPANY
Description
DESIGN CONTROL REFERENCE: 321862-16
FASTENER LENGTH: 0.438 INCHES NOMINAL
HEAD DIAMETER: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
HEAD HEIGHT: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD STYLE: A23 PAN
HEAD SURFACE TREATMENT: PASSIVATE
HEAD SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 96214
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE
SHANK SURFACE TREATMENT: OXIDE AND PASSIVATE
SHANK SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924,CLASS 4 MIL SPEC SINGLE TREATMENT RESPONSE AND QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.156 INCHES NOMINAL
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
321862-16
SCREW,MACHINE
NSN, MFG P/N
5305010873183
NSN
5305-01-087-3183
MFG
EADS DEUTSCHLAND GMBH DEFENCE ELECTR ONICS ABTEILUNG VELB6
Description
DESIGN CONTROL REFERENCE: 321862-16
FASTENER LENGTH: 0.438 INCHES NOMINAL
HEAD DIAMETER: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
HEAD HEIGHT: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD STYLE: A23 PAN
HEAD SURFACE TREATMENT: PASSIVATE
HEAD SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 96214
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE
SHANK SURFACE TREATMENT: OXIDE AND PASSIVATE
SHANK SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924,CLASS 4 MIL SPEC SINGLE TREATMENT RESPONSE AND QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.156 INCHES NOMINAL
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
579R657H03
SCREW,MACHINE
NSN, MFG P/N
5305010873184
NSN
5305-01-087-3184
MFG
NORTHROP GRUMMAN SYSTEMS CORPORATION DIV NORTHROP GRUMMAN SYSTEMS CORPORATION ELECTRONIC SYSTEMS
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
DESIGN CONTROL REFERENCE: 579R657H03
FASTENER LENGTH: 1.250 INCHES MINIMUM AND 1.312 INCHES MAXIMUM
HEAD DIAMETER: 0.191 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 97942
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD 1ST MATERIAL RESPONSE OR AISI ASSN STD 2ND MATERIAL RESPONSE OR AISI ASSN STD 3RD MATERIAL RESPONSE OR COMP 16-18 ASSN STD 4TH MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.190 INCHES MINIMUM AND 1.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC