My Quote Request
5305-01-094-6051
20 Products
FF-S-92
SCREW,MACHINE
NSN, MFG P/N
5305010946051
NSN
5305-01-094-6051
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS51959-82B
FASTENER LENGTH: 0.844 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
HEAD DIAMETER: 0.685 INCHES MINIMUM AND 0.762 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-92
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 2C STYLE
SCREW MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314
SCREW SURFACE TREATMENT: OXIDE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924,CL 4 MIL SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.514 INCHES MINIMUM AND 0.645 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
~1: OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385
Related Searches:
422196
SCREW,MACHINE
NSN, MFG P/N
5305010944378
NSN
5305-01-094-4378
MFG
ARMY WEAPONS COMMAND ATTN AMSWE-REE-S
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: 422196
FASTENER LENGTH: 0.067 INCHES MINIMUM AND 0.099 INCHES MAXIMUM
HEAD DIAMETER: 0.217 INCHES MINIMUM AND 0.236 INCHES MAXIMUM
HEAD HEIGHT: 0.083 INCHES MINIMUM AND 0.095 INCHES MAXIMUM
HEAD STYLE: A28 ROUND
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 21450
NOMINAL THREAD DIAMETER: 0.116 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.067 INCHES MINIMUM AND 0.099 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 44
THREAD SERIES DESIGNATOR: UNS
Related Searches:
C7123-4B3
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305010944384
NSN
5305-01-094-4384
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN DIV LOCKHEED MARTIN AERONAUTICS COMPANY
Description
DESIGN CONTROL REFERENCE: D7500-4-B.3
FASTENER LENGTH: 0.494 INCHES NOMINAL
HEAD DIAMETER: 0.325 INCHES NOMINAL
HEAD HEIGHT: 0.270 INCHES NOMINAL
HEAD STYLE: C49 FLAT CHAMFER
MANUFACTURERS CODE: 0HDW7
MATERIAL: STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 384 OR STEEL COMP 385 FASTENER
MATERIAL ACCOMMODATED THICKNESS: 0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A493 ASSN STD ALL MATERIAL RESPONSES FASTENER
NOMINAL THREAD DIAMETER: 0.112 INCHES
SPECIAL FEATURES: HEAD VERTICALLY KNURLED
SURFACE TREATMENT: ANODIZE HEAD PASSIVATE SPRING ANODIZE STAND-OFF PASSIVATE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE HEAD QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.469 INCHES MINIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
D7500-4-B.3
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305010944384
NSN
5305-01-094-4384
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS DIV HUCK PRODUCTS DIVISION
Description
DESIGN CONTROL REFERENCE: D7500-4-B.3
FASTENER LENGTH: 0.494 INCHES NOMINAL
HEAD DIAMETER: 0.325 INCHES NOMINAL
HEAD HEIGHT: 0.270 INCHES NOMINAL
HEAD STYLE: C49 FLAT CHAMFER
MANUFACTURERS CODE: 0HDW7
MATERIAL: STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 384 OR STEEL COMP 385 FASTENER
MATERIAL ACCOMMODATED THICKNESS: 0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A493 ASSN STD ALL MATERIAL RESPONSES FASTENER
NOMINAL THREAD DIAMETER: 0.112 INCHES
SPECIAL FEATURES: HEAD VERTICALLY KNURLED
SURFACE TREATMENT: ANODIZE HEAD PASSIVATE SPRING ANODIZE STAND-OFF PASSIVATE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE HEAD QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.469 INCHES MINIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
D7500-4-B.3
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305010944384
NSN
5305-01-094-4384
MFG
HUCK INTL INC
Description
DESIGN CONTROL REFERENCE: D7500-4-B.3
FASTENER LENGTH: 0.494 INCHES NOMINAL
HEAD DIAMETER: 0.325 INCHES NOMINAL
HEAD HEIGHT: 0.270 INCHES NOMINAL
HEAD STYLE: C49 FLAT CHAMFER
MANUFACTURERS CODE: 0HDW7
MATERIAL: STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 384 OR STEEL COMP 385 FASTENER
MATERIAL ACCOMMODATED THICKNESS: 0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A493 ASSN STD ALL MATERIAL RESPONSES FASTENER
NOMINAL THREAD DIAMETER: 0.112 INCHES
SPECIAL FEATURES: HEAD VERTICALLY KNURLED
SURFACE TREATMENT: ANODIZE HEAD PASSIVATE SPRING ANODIZE STAND-OFF PASSIVATE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE HEAD QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.469 INCHES MINIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
600943-01
SCREW,MACHINE
NSN, MFG P/N
5305010944885
NSN
5305-01-094-4885
MFG
DRS C3 & AVIATION COMPANY
Description
SCREW,MACHINE
Related Searches:
724-100366
SCREW,MACHINE
NSN, MFG P/N
5305010944885
NSN
5305-01-094-4885
MFG
DRS C3 & AVIATION COMPANY
Description
SCREW,MACHINE
Related Searches:
519955-1
SCREW,MACHINE
NSN, MFG P/N
5305010944887
NSN
5305-01-094-4887
MFG
WHITE ELECTRONIC DESIGNS CORP ORATION
Description
SCREW,MACHINE
Related Searches:
211-0588-00
SCREW,MACHINE
NSN, MFG P/N
5305010945073
NSN
5305-01-094-5073
MFG
TEKTRONIX INC. DBA TEKTRONIX
Description
FASTENER LENGTH: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
HEAD HEIGHT: 0.080 INCHES MINIMUM AND 0.093 INCHES MAXIMUM
HEAD STYLE: A1 HEXAGON
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: STEEL
SCREW SURFACE TREATMENT: CADMIUM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM A165 TY TS ASSN STD SINGLE TREATMENT RESPONSE
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.657 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
Related Searches:
SS5012-4-45
SCREW,MACHINE
NSN, MFG P/N
5305010945716
NSN
5305-01-094-5716
MFG
SIKORSKY AIRCRAFT CORPORATION
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DESIGN CONTROL REFERENCE: SS5012-4-45
FASTENER LENGTH: 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM
HEAD DIAMETER: 0.491 INCHES MINIMUM AND 0.507 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B3 CROSS RECESS TYPE III
MANUFACTURERS CODE: 78286
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7839 MIL SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE II,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.134 INCHES MINIMUM AND 1.154 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
SS5012-4-45
SCREW,MACHINE
NSN, MFG P/N
5305010945716
NSN
5305-01-094-5716
MFG
ROTAIR INDUSTRIES INC .
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DESIGN CONTROL REFERENCE: SS5012-4-45
FASTENER LENGTH: 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM
HEAD DIAMETER: 0.491 INCHES MINIMUM AND 0.507 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B3 CROSS RECESS TYPE III
MANUFACTURERS CODE: 78286
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7839 MIL SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE II,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.134 INCHES MINIMUM AND 1.154 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
SS5012-4-45
SCREW,MACHINE
NSN, MFG P/N
5305010945716
NSN
5305-01-094-5716
MFG
HARTFORD AIRCRAFT PRODUCTS INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DESIGN CONTROL REFERENCE: SS5012-4-45
FASTENER LENGTH: 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM
HEAD DIAMETER: 0.491 INCHES MINIMUM AND 0.507 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B3 CROSS RECESS TYPE III
MANUFACTURERS CODE: 78286
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7839 MIL SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE II,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.134 INCHES MINIMUM AND 1.154 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
55382
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305010945963
NSN
5305-01-094-5963
MFG
KOLLMORGEN CORPORATION DBA KOLLMORGEN ELECTRO OPTICAL A DANAHER COMPANY.
Description
DESIGN CONTROL REFERENCE: 55382
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.030 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FOURTH DIAMETER: 0.176 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER: 0.114 INCHES MINIMUM AND 0.119 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER: 0.145 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 4
FASTENER LENGTH: 0.319 INCHES NOMINAL
FIRST DIAMETER FROM HEAD: 0.095 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
FOURTH DIAMETER FROM HEAD: 0.188 INCHES NOMINAL
HEAD DIAMETER: 0.121 INCHES MINIMUM AND 0.124 INCHES MAXIMUM
HEAD HEIGHT: 0.056 INCHES NOMINAL
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D14 SLOT
MANUFACTURERS CODE: 34228
MATERIAL: STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.138 INCHES
SECOND DIAMETER FROM HEAD: 0.121 INCHES MINIMUM AND 0.124 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THE MANUFACTURERS DATA:
THIRD DIAMETER FROM HEAD: 0.187 INCHES NOMINAL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.143 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
933B055382
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305010945963
NSN
5305-01-094-5963
933B055382
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305010945963
NSN
5305-01-094-5963
MFG
KOLLMORGEN CORPORATION DBA KOLLMORGEN ELECTRO OPTICAL A DANAHER COMPANY.
Description
DESIGN CONTROL REFERENCE: 55382
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.030 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FOURTH DIAMETER: 0.176 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER: 0.114 INCHES MINIMUM AND 0.119 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER: 0.145 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 4
FASTENER LENGTH: 0.319 INCHES NOMINAL
FIRST DIAMETER FROM HEAD: 0.095 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
FOURTH DIAMETER FROM HEAD: 0.188 INCHES NOMINAL
HEAD DIAMETER: 0.121 INCHES MINIMUM AND 0.124 INCHES MAXIMUM
HEAD HEIGHT: 0.056 INCHES NOMINAL
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D14 SLOT
MANUFACTURERS CODE: 34228
MATERIAL: STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.138 INCHES
SECOND DIAMETER FROM HEAD: 0.121 INCHES MINIMUM AND 0.124 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THE MANUFACTURERS DATA:
THIRD DIAMETER FROM HEAD: 0.187 INCHES NOMINAL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.143 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
662421
SCREW
NSN, MFG P/N
5305010945982
NSN
5305-01-094-5982
MFG
MTU DETROIT DIESEL INC. DIV MTU DETROIT DIESEL INC.
Description
SCREW
Related Searches:
50-64314-02
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305010946037
NSN
5305-01-094-6037
MFG
VICKERS INC
Description
DESIGN CONTROL REFERENCE: 50-64314-02
MANUFACTURERS CODE: 24785
NOMINAL THREAD DIAMETER: 0.375 INCHES
THE MANUFACTURERS DATA:
THREAD LENGTH: 1.000 INCHES NOMINAL
THREAD SERIES DESIGNATOR: UNF
Related Searches:
BMD-193-13
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305010946038
NSN
5305-01-094-6038
MFG
METRONICS INC SUB OF JOHNSON CARLYLE MACHINE CO
Description
DESIGN CONTROL REFERENCE: BMD-193-13
FASTENER LENGTH: 0.750 INCHES NOMINAL
MANUFACTURERS CODE: 54696
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE TREATMENT: CADMIUM OVERALL
THE MANUFACTURERS DATA:
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNC
Related Searches:
BMD-193-14
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305010946039
NSN
5305-01-094-6039
MFG
METRONICS INC SUB OF JOHNSON CARLYLE MACHINE CO
Description
DESIGN CONTROL REFERENCE: BMD-193-14
FASTENER LENGTH: 1.000 INCHES NOMINAL
MANUFACTURERS CODE: 54696
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE TREATMENT: CADMIUM OVERALL
THE MANUFACTURERS DATA:
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNC
Related Searches:
600276-01
SCREW,MACHINE
NSN, MFG P/N
5305010946049
NSN
5305-01-094-6049
MFG
DRS C3 & AVIATION COMPANY
Description
FASTENER LENGTH: 0.175 INCHES NOMINAL
HEAD DIAMETER: 0.625 INCHES NOMINAL
HEAD HEIGHT: 0.150 INCHES NOMINAL
HEAD STYLE: A38 FLAT CHAMFER
INTERNAL DRIVE STYLE: B10 SLOT
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: STEEL COMP 303
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 TY 2 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.175 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
540177-017
SCREW,MACHINE
NSN, MFG P/N
5305010946050
NSN
5305-01-094-6050
MFG
BAE SYSTEMS NATIONAL SECURITY SOLUTIONS INC.
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HEAD DIAMETER: 0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.352 INCHES MINIMUM AND 0.433 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
~1: OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385