My Quote Request
5305-01-099-7158
20 Products
910003-01
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305010997158
NSN
5305-01-099-7158
MFG
NORTHROP GRUMMAN SYSTEMS CORPORATION
Description
SCREW,CAP,SOCKET HEAD
Related Searches:
40577F31
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305010997159
NSN
5305-01-099-7159
MFG
ALLEN MFG CO SUB OF CHICAGO PNEUMATIC TOOL CO
Description
SCREW,CAP,SOCKET HEAD
Related Searches:
400A2
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305010997164
NSN
5305-01-099-7164
MFG
OSHKOSH CORPORATION
Description
SCREW,CAP,HEXAGON HEAD
Related Searches:
15405-005
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305010997188
NSN
5305-01-099-7188
15405-005
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305010997188
NSN
5305-01-099-7188
MFG
ASTRONAUTICS CORPORATION OF AMERICA
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD: 0.077 INCHES MINIMUM AND 0.082 INCHES MAXIMUM
HEAD DIAMETER: 0.191 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER: 0.112 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2B
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.190 INCHES NOMINAL
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
15406-019
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305010997189
NSN
5305-01-099-7189
15406-019
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305010997189
NSN
5305-01-099-7189
MFG
ASTRONAUTICS CORPORATION OF AMERICA
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.640 INCHES MINIMUM AND 0.670 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 0.470 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD: 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM
HEAD DIAMETER: 0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.092 INCHES NOMINAL
HEAD STYLE: C33 PAN NO. 2
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER: 0.138 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.170 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
15075-003
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305010997190
NSN
5305-01-099-7190
15075-003
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305010997190
NSN
5305-01-099-7190
MFG
ASTRONAUTICS CORPORATION OF AMERICA
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.192 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 0.312 INCHES NOMINAL
FIRST DIAMETER FROM HEAD: 0.080 INCHES MINIMUM AND 0.084 INCHES MAXIMUM
HEAD DIAMETER: 0.207 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER: 0.112 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.120 INCHES NOMINAL
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
70A3810205-480
SCREW,MACHINE
NSN, MFG P/N
5305010997193
NSN
5305-01-099-7193
MFG
GENERAL DYNAMICS C4 SYSTEMS INC.
Description
FASTENER LENGTH: 0.156 INCHES NOMINAL
HEAD DIAMETER: 0.171 INCHES MINIMUM AND 0.181 INCHES MAXIMUM
HEAD HEIGHT: 0.041 INCHES MINIMUM AND 0.050 INCHES MAXIMUM
HEAD STYLE: A20 BINDING
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 0.086 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.156 INCHES NOMINAL
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNC
Related Searches:
14451-001
SCREW,MACHINE
NSN, MFG P/N
5305010997194
NSN
5305-01-099-7194
MFG
ASTRONAUTICS CORPORATION OF AMERICA
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 0.120 INCHES NOMINAL
HEAD DIAMETER: 0.105 INCHES MINIMUM AND 0.119 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 0.060 INCHES
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626 COMP 11 OR 22 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: OXIDE FILM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-495 MIL SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.083 INCHES NOMINAL
THREAD QUANTITY PER INCH: 80
THREAD SERIES DESIGNATOR: UNF
Related Searches:
16391-003
SCREW,MACHINE
NSN, MFG P/N
5305010997195
NSN
5305-01-099-7195
MFG
ASTRONAUTICS CORPORATION OF AMERICA
Description
FASTENER LENGTH: 0.247 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD DIAMETER: 0.111 INCHES NOMINAL
HEAD HEIGHT: 0.062 INCHES NOMINAL
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B10 SLOT
NOMINAL THREAD DIAMETER: 0.073 INCHES
SCREW MATERIAL: STEEL COMP 303
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-764 COND A FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.247 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 72
THREAD SERIES DESIGNATOR: UNF
Related Searches:
CS18
SCREW,MACHINE
NSN, MFG P/N
5305010997195
NSN
5305-01-099-7195
MFG
COAST GUARD YARD UPH
Description
FASTENER LENGTH: 0.247 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD DIAMETER: 0.111 INCHES NOMINAL
HEAD HEIGHT: 0.062 INCHES NOMINAL
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B10 SLOT
NOMINAL THREAD DIAMETER: 0.073 INCHES
SCREW MATERIAL: STEEL COMP 303
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-764 COND A FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.247 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 72
THREAD SERIES DESIGNATOR: UNF
Related Searches:
10511-001
SCREW,MACHINE
NSN, MFG P/N
5305010997196
NSN
5305-01-099-7196
MFG
ASTRONAUTICS CORPORATION OF AMERICA
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.120 INCHES NOMINAL
HEAD DIAMETER: 0.105 INCHES MINIMUM AND 0.119 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 0.060 INCHES
SCREW MATERIAL: STEEL COMP 303
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7720 TYPE A MIL SPEC SINGLE MATERIAL RESPONSE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.095 INCHES MINIMUM AND 0.101 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 80
THREAD SERIES DESIGNATOR: UNF
Related Searches:
MS24622-33
SCREW,TAPPING
NSN, MFG P/N
5305010997199
NSN
5305-01-099-7199
MFG
BOSCH REXROTH GMBH LOHMANN STOLTER OHT
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS51861-38C
FASTENER LENGTH: 0.875 INCHES NOMINAL
HEAD DIAMETER: 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD HEIGHT: 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D14 SLOT
MANUFACTURERS CODE: 96906
MATERIAL: STEEL CORROSION RESISTING OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.294 INCHES
NONMACHINE THREAD STYLE: A13 GIMLET POINT (TYPE A, AB OR BA)
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Related Searches:
MS24638-26
SCREW,TAPPING
NSN, MFG P/N
5305010997199
NSN
5305-01-099-7199
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS51861-38C
FASTENER LENGTH: 0.875 INCHES NOMINAL
HEAD DIAMETER: 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD HEIGHT: 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D14 SLOT
MANUFACTURERS CODE: 96906
MATERIAL: STEEL CORROSION RESISTING OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.294 INCHES
NONMACHINE THREAD STYLE: A13 GIMLET POINT (TYPE A, AB OR BA)
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Related Searches:
MS51861-38C
SCREW,TAPPING
NSN, MFG P/N
5305010997199
NSN
5305-01-099-7199
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS51861-38C
FASTENER LENGTH: 0.875 INCHES NOMINAL
HEAD DIAMETER: 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD HEIGHT: 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D14 SLOT
MANUFACTURERS CODE: 96906
MATERIAL: STEEL CORROSION RESISTING OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.294 INCHES
NONMACHINE THREAD STYLE: A13 GIMLET POINT (TYPE A, AB OR BA)
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Related Searches:
11454937-2
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305010997203
NSN
5305-01-099-7203
MFG
U S ARMY AVIATION AND MISSILE COMMAND
Description
DEPARTURE FROM CITED DESIGNATOR: AS MODIFIED BY SURFACE FINISH
FASTENER LENGTH: 4.980 INCHES MINIMUM AND 5.020 INCHES MAXIMUM
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL OVERALL
MINIMUM TENSILE STRENGTH: 170000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 150000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-86
NONDEFINITIVE SPEC/STD DATA: 6 TYPE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: NICKEL OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-26074,CL 1 GR B MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.000 INCHES MINIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNRF
WIDTH ACROSS FLATS: 0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
Related Searches:
79078-4-80
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305010997203
NSN
5305-01-099-7203
MFG
ALTA PRODUCTS CO INC
Description
DEPARTURE FROM CITED DESIGNATOR: AS MODIFIED BY SURFACE FINISH
FASTENER LENGTH: 4.980 INCHES MINIMUM AND 5.020 INCHES MAXIMUM
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL OVERALL
MINIMUM TENSILE STRENGTH: 170000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 150000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-86
NONDEFINITIVE SPEC/STD DATA: 6 TYPE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: NICKEL OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-26074,CL 1 GR B MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.000 INCHES MINIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNRF
WIDTH ACROSS FLATS: 0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
Related Searches:
D16161-17
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305010997203
NSN
5305-01-099-7203
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS DIV HUCK PRODUCTS DIVISION
Description
DEPARTURE FROM CITED DESIGNATOR: AS MODIFIED BY SURFACE FINISH
FASTENER LENGTH: 4.980 INCHES MINIMUM AND 5.020 INCHES MAXIMUM
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL OVERALL
MINIMUM TENSILE STRENGTH: 170000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 150000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-86
NONDEFINITIVE SPEC/STD DATA: 6 TYPE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: NICKEL OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-26074,CL 1 GR B MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.000 INCHES MINIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNRF
WIDTH ACROSS FLATS: 0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
Related Searches:
D16161-17
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305010997203
NSN
5305-01-099-7203
MFG
HUCK INTL INC
Description
DEPARTURE FROM CITED DESIGNATOR: AS MODIFIED BY SURFACE FINISH
FASTENER LENGTH: 4.980 INCHES MINIMUM AND 5.020 INCHES MAXIMUM
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL OVERALL
MINIMUM TENSILE STRENGTH: 170000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 150000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-86
NONDEFINITIVE SPEC/STD DATA: 6 TYPE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: NICKEL OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-26074,CL 1 GR B MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.000 INCHES MINIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNRF
WIDTH ACROSS FLATS: 0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
Related Searches:
FF-S-86
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305010997203
NSN
5305-01-099-7203
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
DEPARTURE FROM CITED DESIGNATOR: AS MODIFIED BY SURFACE FINISH
FASTENER LENGTH: 4.980 INCHES MINIMUM AND 5.020 INCHES MAXIMUM
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL OVERALL
MINIMUM TENSILE STRENGTH: 170000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 150000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-86
NONDEFINITIVE SPEC/STD DATA: 6 TYPE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: NICKEL OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-26074,CL 1 GR B MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.000 INCHES MINIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNRF
WIDTH ACROSS FLATS: 0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
Related Searches:
11454937-1
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305010997204
NSN
5305-01-099-7204
MFG
U S ARMY AVIATION AND MISSILE COMMAND
Description
DEPARTURE FROM CITED DESIGNATOR: AS MODIFIED BY SURFACE FINISH
FASTENER LENGTH: 2.730 INCHES MINIMUM AND 2.770 INCHES MAXIMUM
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL OVERALL
MINIMUM TENSILE STRENGTH: 170000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 150000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-86
NONDEFINITIVE SPEC/STD DATA: 6 TYPE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: NICKEL OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-26074,CL 1 GR B MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.000 INCHES MINIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNRF
WIDTH ACROSS FLATS: 0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM