My Quote Request
5305-01-129-9059
20 Products
HT4020-5-15A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011299059
NSN
5305-01-129-9059
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.453 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM
HEAD DIAMETER: 0.629 INCHES MINIMUM AND 0.634 INCHES MAXIMUM
HEAD HEIGHT: 0.088 INCHES MINIMUM AND 0.090 INCHES MAXIMUM
HEAD STYLE: C51 FLAT COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: FURNISHED WITH ONE O-RING
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.505 INCHES MINIMUM AND 0.572 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
FT1171-122
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305011299034
NSN
5305-01-129-9034
MFG
FASTENER TECHNOLOGY CORP
Description
FASTENER LENGTH: 0.583 INCHES MINIMUM AND 0.613 INCHES MAXIMUM
HEAD DIAMETER: 0.305 INCHES MINIMUM AND 0.315 INCHES MAXIMUM
HEAD HEIGHT: 0.077 INCHES MINIMUM AND 0.107 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 301 PRIMARY WASHER STEEL COMP 304 STAND-OFF STEEL COMP 302 FASTENER
MATERIAL ACCOMMODATED THICKNESS: 0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE PRIMARY WASHER MIL-S-23195 MIL SPEC SINGLE MATERIAL RESPONSE STAND-OFF ASTM-A-493 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
MINIMUM TENSILE STRENGTH: 112000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SURFACE TREATMENT: PASSIVATE PRIMARY WASHER PASSIVATE STAND-OFF PASSIVATE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STAND-OFF QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.188 INCHES MINIMUM AND 0.218 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
HT4020-5-14A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011299058
NSN
5305-01-129-9058
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.390 INCHES MINIMUM AND 1.437 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM
HEAD DIAMETER: 0.629 INCHES MINIMUM AND 0.634 INCHES MAXIMUM
HEAD HEIGHT: 0.088 INCHES MINIMUM AND 0.090 INCHES MAXIMUM
HEAD STYLE: C51 FLAT COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: FURNISHED WITH ONE O-RING
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.505 INCHES MINIMUM AND 0.572 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4020-5-14A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011299058
NSN
5305-01-129-9058
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.390 INCHES MINIMUM AND 1.437 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM
HEAD DIAMETER: 0.629 INCHES MINIMUM AND 0.634 INCHES MAXIMUM
HEAD HEIGHT: 0.088 INCHES MINIMUM AND 0.090 INCHES MAXIMUM
HEAD STYLE: C51 FLAT COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: FURNISHED WITH ONE O-RING
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.505 INCHES MINIMUM AND 0.572 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4020-5-14A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011299058
NSN
5305-01-129-9058
MFG
HI-SHEAR CORPORATION
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.390 INCHES MINIMUM AND 1.437 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM
HEAD DIAMETER: 0.629 INCHES MINIMUM AND 0.634 INCHES MAXIMUM
HEAD HEIGHT: 0.088 INCHES MINIMUM AND 0.090 INCHES MAXIMUM
HEAD STYLE: C51 FLAT COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: FURNISHED WITH ONE O-RING
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.505 INCHES MINIMUM AND 0.572 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4020-5-14A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011299058
NSN
5305-01-129-9058
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.390 INCHES MINIMUM AND 1.437 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM
HEAD DIAMETER: 0.629 INCHES MINIMUM AND 0.634 INCHES MAXIMUM
HEAD HEIGHT: 0.088 INCHES MINIMUM AND 0.090 INCHES MAXIMUM
HEAD STYLE: C51 FLAT COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: FURNISHED WITH ONE O-RING
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.505 INCHES MINIMUM AND 0.572 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4020-5-14A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011299058
NSN
5305-01-129-9058
MFG
SPS TECHNOLOGIES LTD TJ BROOKS DIVIS ION
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.390 INCHES MINIMUM AND 1.437 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM
HEAD DIAMETER: 0.629 INCHES MINIMUM AND 0.634 INCHES MAXIMUM
HEAD HEIGHT: 0.088 INCHES MINIMUM AND 0.090 INCHES MAXIMUM
HEAD STYLE: C51 FLAT COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: FURNISHED WITH ONE O-RING
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.505 INCHES MINIMUM AND 0.572 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4020-5-14A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011299058
NSN
5305-01-129-9058
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.390 INCHES MINIMUM AND 1.437 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM
HEAD DIAMETER: 0.629 INCHES MINIMUM AND 0.634 INCHES MAXIMUM
HEAD HEIGHT: 0.088 INCHES MINIMUM AND 0.090 INCHES MAXIMUM
HEAD STYLE: C51 FLAT COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: FURNISHED WITH ONE O-RING
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.505 INCHES MINIMUM AND 0.572 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4020-5-14A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011299058
NSN
5305-01-129-9058
MFG
HUCK INTL INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.390 INCHES MINIMUM AND 1.437 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM
HEAD DIAMETER: 0.629 INCHES MINIMUM AND 0.634 INCHES MAXIMUM
HEAD HEIGHT: 0.088 INCHES MINIMUM AND 0.090 INCHES MAXIMUM
HEAD STYLE: C51 FLAT COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: FURNISHED WITH ONE O-RING
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.505 INCHES MINIMUM AND 0.572 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
ST3M652C5-14A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011299058
NSN
5305-01-129-9058
MFG
BOEING COMPANY THE DBA BOEING
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.390 INCHES MINIMUM AND 1.437 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM
HEAD DIAMETER: 0.629 INCHES MINIMUM AND 0.634 INCHES MAXIMUM
HEAD HEIGHT: 0.088 INCHES MINIMUM AND 0.090 INCHES MAXIMUM
HEAD STYLE: C51 FLAT COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: FURNISHED WITH ONE O-RING
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.505 INCHES MINIMUM AND 0.572 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
ST3M652C5-14A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011299058
NSN
5305-01-129-9058
MFG
FASTENER INNOVATION TECHNOLOGY INC DBA F.I.T.
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.390 INCHES MINIMUM AND 1.437 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM
HEAD DIAMETER: 0.629 INCHES MINIMUM AND 0.634 INCHES MAXIMUM
HEAD HEIGHT: 0.088 INCHES MINIMUM AND 0.090 INCHES MAXIMUM
HEAD STYLE: C51 FLAT COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: FURNISHED WITH ONE O-RING
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.505 INCHES MINIMUM AND 0.572 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
ST3M652C5-14A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011299058
NSN
5305-01-129-9058
MFG
WEST COAST AEROSPACE INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.390 INCHES MINIMUM AND 1.437 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM
HEAD DIAMETER: 0.629 INCHES MINIMUM AND 0.634 INCHES MAXIMUM
HEAD HEIGHT: 0.088 INCHES MINIMUM AND 0.090 INCHES MAXIMUM
HEAD STYLE: C51 FLAT COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: FURNISHED WITH ONE O-RING
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.505 INCHES MINIMUM AND 0.572 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4020-5-15A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011299059
NSN
5305-01-129-9059
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.453 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM
HEAD DIAMETER: 0.629 INCHES MINIMUM AND 0.634 INCHES MAXIMUM
HEAD HEIGHT: 0.088 INCHES MINIMUM AND 0.090 INCHES MAXIMUM
HEAD STYLE: C51 FLAT COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: FURNISHED WITH ONE O-RING
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.505 INCHES MINIMUM AND 0.572 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4020-5-15A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011299059
NSN
5305-01-129-9059
MFG
HI-SHEAR CORPORATION
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.453 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM
HEAD DIAMETER: 0.629 INCHES MINIMUM AND 0.634 INCHES MAXIMUM
HEAD HEIGHT: 0.088 INCHES MINIMUM AND 0.090 INCHES MAXIMUM
HEAD STYLE: C51 FLAT COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: FURNISHED WITH ONE O-RING
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.505 INCHES MINIMUM AND 0.572 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4020-5-15A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011299059
NSN
5305-01-129-9059
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.453 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM
HEAD DIAMETER: 0.629 INCHES MINIMUM AND 0.634 INCHES MAXIMUM
HEAD HEIGHT: 0.088 INCHES MINIMUM AND 0.090 INCHES MAXIMUM
HEAD STYLE: C51 FLAT COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: FURNISHED WITH ONE O-RING
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.505 INCHES MINIMUM AND 0.572 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4020-5-15A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011299059
NSN
5305-01-129-9059
MFG
SPS TECHNOLOGIES LTD TJ BROOKS DIVIS ION
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.453 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM
HEAD DIAMETER: 0.629 INCHES MINIMUM AND 0.634 INCHES MAXIMUM
HEAD HEIGHT: 0.088 INCHES MINIMUM AND 0.090 INCHES MAXIMUM
HEAD STYLE: C51 FLAT COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: FURNISHED WITH ONE O-RING
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.505 INCHES MINIMUM AND 0.572 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4020-5-15A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011299059
NSN
5305-01-129-9059
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.453 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM
HEAD DIAMETER: 0.629 INCHES MINIMUM AND 0.634 INCHES MAXIMUM
HEAD HEIGHT: 0.088 INCHES MINIMUM AND 0.090 INCHES MAXIMUM
HEAD STYLE: C51 FLAT COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: FURNISHED WITH ONE O-RING
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.505 INCHES MINIMUM AND 0.572 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4020-5-15A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011299059
NSN
5305-01-129-9059
MFG
HUCK INTL INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.453 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM
HEAD DIAMETER: 0.629 INCHES MINIMUM AND 0.634 INCHES MAXIMUM
HEAD HEIGHT: 0.088 INCHES MINIMUM AND 0.090 INCHES MAXIMUM
HEAD STYLE: C51 FLAT COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: FURNISHED WITH ONE O-RING
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.505 INCHES MINIMUM AND 0.572 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
ST3M652C5-15A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011299059
NSN
5305-01-129-9059
MFG
FASTENER INNOVATION TECHNOLOGY INC DBA F.I.T.
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.453 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM
HEAD DIAMETER: 0.629 INCHES MINIMUM AND 0.634 INCHES MAXIMUM
HEAD HEIGHT: 0.088 INCHES MINIMUM AND 0.090 INCHES MAXIMUM
HEAD STYLE: C51 FLAT COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: FURNISHED WITH ONE O-RING
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.505 INCHES MINIMUM AND 0.572 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
ST3M652C5-15A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011299059
NSN
5305-01-129-9059
MFG
WEST COAST AEROSPACE INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.453 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM
HEAD DIAMETER: 0.629 INCHES MINIMUM AND 0.634 INCHES MAXIMUM
HEAD HEIGHT: 0.088 INCHES MINIMUM AND 0.090 INCHES MAXIMUM
HEAD STYLE: C51 FLAT COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: FURNISHED WITH ONE O-RING
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.505 INCHES MINIMUM AND 0.572 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF