My Quote Request
5305-01-155-5439
20 Products
0636 015 279
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305011555439
NSN
5305-01-155-5439
MFG
ZF INDUSTRIES INC
Description
FASTENER LENGTH: 16.00 MILLIMETERS NOMINAL
HARDNESS RATING: 18.0 ROCKWELL C MINIMUM AND 31.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 4.5 MILLIMETERS NOMINAL
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL PROPERTY CLASS 8.8 OVERALL
MINIMUM TENSILE STRENGTH: 11378 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 6.0 MILLIMETERS
SURFACE TREATMENT: ZINC OVERALL
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 14.0 MILLIMETERS MINIMUM AND 16.0 MILLIMETERS MAXIMUM
THREAD PITCH IN MILLIMETERS: 1.0
THREAD SERIES DESIGNATOR: M
WIDTH BETWEEN FLATS: 10.0 MILLIMETERS NOMINAL
Related Searches:
M/25-20013
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305011555241
NSN
5305-01-155-5241
MFG
AM GENERAL LLC
Description
SCREW,CAP,HEXAGON HEAD
Related Searches:
HT4049-3-8
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011555243
NSN
5305-01-155-5243
MFG
HI-SHEAR CORPORATION
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.761 INCHES MINIMUM AND 0.791 INCHES MAXIMUM
GRIP DIAMETER: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
HEAD DIAMETER: 0.338 INCHES MINIMUM AND 0.381 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE FINISH: 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
ST3M714-3-8
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011555243
NSN
5305-01-155-5243
MFG
BOEING COMPANY THE DBA BOEING
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.761 INCHES MINIMUM AND 0.791 INCHES MAXIMUM
GRIP DIAMETER: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
HEAD DIAMETER: 0.338 INCHES MINIMUM AND 0.381 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE FINISH: 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
F7500-6-C-2
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305011555244
NSN
5305-01-155-5244
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS DIV HUCK PRODUCTS DIVISION
Description
FASTENER LENGTH: 0.620 INCHES MINIMUM AND 0.650 INCHES MAXIMUM
HEAD DIAMETER: 0.341 INCHES MINIMUM AND 0.371 INCHES MAXIMUM
HEAD HEIGHT: 0.255 INCHES MINIMUM AND 0.285 INCHES MAXIMUM
HEAD STYLE: C69 KNURLED NO. 4
INTERNAL DRIVE STYLE: D21 W/O INTERNAL DRIVE
MATERIAL: ALUMINUM ALLOY 6061 HEAD STEEL COMP 301 PRIMARY WASHER STEEL COMP 302 SPRING ALUMINUM ALLOY 6061 STAND-OFF STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 384 OR STEEL COMP 385
MATERIAL ACCOMMODATED THICKNESS: 0.094 INCHES MINIMUM AND 0.155 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE HEAD MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE PRIMARY WASHER QQ-W-423 COND B FED SPEC SINGLE MATERIAL RESPONSE SPRING QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF ASTM A493 ASSN STD ALL MATERIAL
NOMINAL THREAD DIAMETER: 0.138 INCHES
SPECIAL FEATURES: STRAIGHT KNURL
SURFACE TREATMENT: ANODIZE HEAD PASSIVATE PRIMARY WASHER PASSIVATE SPRING ANODIZE STAND-OFF PASSIVATE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 TY 1 CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE HEAD QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING MIL-A-8625 TY 1 CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF QQ-P-35 FED
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
~1: FASTENER
~1: RESPONSES FASTENER
~1: SPEC SINGLE TREATMENT RESPONSE FASTENER
Related Searches:
F7500-6-C-2
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305011555244
NSN
5305-01-155-5244
MFG
HUCK INTL INC
Description
FASTENER LENGTH: 0.620 INCHES MINIMUM AND 0.650 INCHES MAXIMUM
HEAD DIAMETER: 0.341 INCHES MINIMUM AND 0.371 INCHES MAXIMUM
HEAD HEIGHT: 0.255 INCHES MINIMUM AND 0.285 INCHES MAXIMUM
HEAD STYLE: C69 KNURLED NO. 4
INTERNAL DRIVE STYLE: D21 W/O INTERNAL DRIVE
MATERIAL: ALUMINUM ALLOY 6061 HEAD STEEL COMP 301 PRIMARY WASHER STEEL COMP 302 SPRING ALUMINUM ALLOY 6061 STAND-OFF STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 384 OR STEEL COMP 385
MATERIAL ACCOMMODATED THICKNESS: 0.094 INCHES MINIMUM AND 0.155 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE HEAD MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE PRIMARY WASHER QQ-W-423 COND B FED SPEC SINGLE MATERIAL RESPONSE SPRING QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF ASTM A493 ASSN STD ALL MATERIAL
NOMINAL THREAD DIAMETER: 0.138 INCHES
SPECIAL FEATURES: STRAIGHT KNURL
SURFACE TREATMENT: ANODIZE HEAD PASSIVATE PRIMARY WASHER PASSIVATE SPRING ANODIZE STAND-OFF PASSIVATE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 TY 1 CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE HEAD QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING MIL-A-8625 TY 1 CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF QQ-P-35 FED
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
~1: FASTENER
~1: RESPONSES FASTENER
~1: SPEC SINGLE TREATMENT RESPONSE FASTENER
Related Searches:
F7500-6-C-2
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305011555244
NSN
5305-01-155-5244
MFG
BOSCH REXROTH GMBH LOHMANN STOLTER OHT
Description
FASTENER LENGTH: 0.620 INCHES MINIMUM AND 0.650 INCHES MAXIMUM
HEAD DIAMETER: 0.341 INCHES MINIMUM AND 0.371 INCHES MAXIMUM
HEAD HEIGHT: 0.255 INCHES MINIMUM AND 0.285 INCHES MAXIMUM
HEAD STYLE: C69 KNURLED NO. 4
INTERNAL DRIVE STYLE: D21 W/O INTERNAL DRIVE
MATERIAL: ALUMINUM ALLOY 6061 HEAD STEEL COMP 301 PRIMARY WASHER STEEL COMP 302 SPRING ALUMINUM ALLOY 6061 STAND-OFF STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 384 OR STEEL COMP 385
MATERIAL ACCOMMODATED THICKNESS: 0.094 INCHES MINIMUM AND 0.155 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE HEAD MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE PRIMARY WASHER QQ-W-423 COND B FED SPEC SINGLE MATERIAL RESPONSE SPRING QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF ASTM A493 ASSN STD ALL MATERIAL
NOMINAL THREAD DIAMETER: 0.138 INCHES
SPECIAL FEATURES: STRAIGHT KNURL
SURFACE TREATMENT: ANODIZE HEAD PASSIVATE PRIMARY WASHER PASSIVATE SPRING ANODIZE STAND-OFF PASSIVATE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 TY 1 CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE HEAD QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING MIL-A-8625 TY 1 CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF QQ-P-35 FED
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
~1: FASTENER
~1: RESPONSES FASTENER
~1: SPEC SINGLE TREATMENT RESPONSE FASTENER
Related Searches:
10501632
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305011555437
NSN
5305-01-155-5437
MFG
GENERAL DYNAMICS LAND SYSTEMS CANADA CORP
Description
FASTENER LENGTH: 30.00 MILLIMETERS NOMINAL
HARDNESS RATING: 18.0 ROCKWELL C MINIMUM AND 31.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 10.5 MILLIMETERS NOMINAL
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL PROPERTY CLASS 8.8 OVERALL
MINIMUM TENSILE STRENGTH: 113784 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 12.0 MILLIMETERS
SPECIAL FEATURES: THREAD PITCH IN MILLIMETERS IS 1.75
SURFACE TREATMENT: ZINC OVERALL
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 26.0 MILLIMETERS MINIMUM AND 30.0 MILLIMETERS MAXIMUM
THREAD SERIES DESIGNATOR: M
WIDTH BETWEEN FLATS: 24.0 MILLIMETERS NOMINAL
Related Searches:
DIN933-M12X30-8.8-A3L
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305011555437
NSN
5305-01-155-5437
DIN933-M12X30-8.8-A3L
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305011555437
NSN
5305-01-155-5437
MFG
DIN DEUTSCHES INSTITUT FUER NORMUNG EV
Description
FASTENER LENGTH: 30.00 MILLIMETERS NOMINAL
HARDNESS RATING: 18.0 ROCKWELL C MINIMUM AND 31.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 10.5 MILLIMETERS NOMINAL
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL PROPERTY CLASS 8.8 OVERALL
MINIMUM TENSILE STRENGTH: 113784 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 12.0 MILLIMETERS
SPECIAL FEATURES: THREAD PITCH IN MILLIMETERS IS 1.75
SURFACE TREATMENT: ZINC OVERALL
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 26.0 MILLIMETERS MINIMUM AND 30.0 MILLIMETERS MAXIMUM
THREAD SERIES DESIGNATOR: M
WIDTH BETWEEN FLATS: 24.0 MILLIMETERS NOMINAL
Related Searches:
ISO4017
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305011555437
NSN
5305-01-155-5437
MFG
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION ISO
Description
FASTENER LENGTH: 30.00 MILLIMETERS NOMINAL
HARDNESS RATING: 18.0 ROCKWELL C MINIMUM AND 31.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 10.5 MILLIMETERS NOMINAL
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL PROPERTY CLASS 8.8 OVERALL
MINIMUM TENSILE STRENGTH: 113784 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 12.0 MILLIMETERS
SPECIAL FEATURES: THREAD PITCH IN MILLIMETERS IS 1.75
SURFACE TREATMENT: ZINC OVERALL
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 26.0 MILLIMETERS MINIMUM AND 30.0 MILLIMETERS MAXIMUM
THREAD SERIES DESIGNATOR: M
WIDTH BETWEEN FLATS: 24.0 MILLIMETERS NOMINAL
Related Searches:
ISO4017M12X30-8.8-A3L
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305011555437
NSN
5305-01-155-5437
ISO4017M12X30-8.8-A3L
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305011555437
NSN
5305-01-155-5437
MFG
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION ISO
Description
FASTENER LENGTH: 30.00 MILLIMETERS NOMINAL
HARDNESS RATING: 18.0 ROCKWELL C MINIMUM AND 31.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 10.5 MILLIMETERS NOMINAL
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL PROPERTY CLASS 8.8 OVERALL
MINIMUM TENSILE STRENGTH: 113784 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 12.0 MILLIMETERS
SPECIAL FEATURES: THREAD PITCH IN MILLIMETERS IS 1.75
SURFACE TREATMENT: ZINC OVERALL
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 26.0 MILLIMETERS MINIMUM AND 30.0 MILLIMETERS MAXIMUM
THREAD SERIES DESIGNATOR: M
WIDTH BETWEEN FLATS: 24.0 MILLIMETERS NOMINAL
Related Searches:
10501758
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305011555438
NSN
5305-01-155-5438
MFG
GENERAL DYNAMICS LAND SYSTEMS CANADA CORP
Description
FASTENER LENGTH: 18.00 MILLIMETERS NOMINAL
HARDNESS RATING: 18.0 ROCKWELL C MINIMUM AND 31.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 5.5 MILLIMETERS NOMINAL
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL PROPERTY CLASS 8.8 OVERALL
MINIMUM TENSILE STRENGTH: 113784 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 8.0 MILLIMETERS
SURFACE TREATMENT: ZINC OVERALL
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 16.5 MILLIMETERS MINIMUM AND 18.0 MILLIMETERS MAXIMUM
THREAD PITCH IN MILLIMETERS: 1.25
THREAD SERIES DESIGNATOR: M
WIDTH BETWEEN FLATS: 13.0 MILLIMETERS NOMINAL
Related Searches:
933-M10X50
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305011555438
NSN
5305-01-155-5438
MFG
METRIC AND MULTISTANDARD COMPONENTS CORP
Description
FASTENER LENGTH: 18.00 MILLIMETERS NOMINAL
HARDNESS RATING: 18.0 ROCKWELL C MINIMUM AND 31.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 5.5 MILLIMETERS NOMINAL
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL PROPERTY CLASS 8.8 OVERALL
MINIMUM TENSILE STRENGTH: 113784 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 8.0 MILLIMETERS
SURFACE TREATMENT: ZINC OVERALL
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 16.5 MILLIMETERS MINIMUM AND 18.0 MILLIMETERS MAXIMUM
THREAD PITCH IN MILLIMETERS: 1.25
THREAD SERIES DESIGNATOR: M
WIDTH BETWEEN FLATS: 13.0 MILLIMETERS NOMINAL
Related Searches:
933-M8X18
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305011555438
NSN
5305-01-155-5438
MFG
METRIC AND MULTISTANDARD COMPONENTS CORP
Description
FASTENER LENGTH: 18.00 MILLIMETERS NOMINAL
HARDNESS RATING: 18.0 ROCKWELL C MINIMUM AND 31.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 5.5 MILLIMETERS NOMINAL
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL PROPERTY CLASS 8.8 OVERALL
MINIMUM TENSILE STRENGTH: 113784 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 8.0 MILLIMETERS
SURFACE TREATMENT: ZINC OVERALL
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 16.5 MILLIMETERS MINIMUM AND 18.0 MILLIMETERS MAXIMUM
THREAD PITCH IN MILLIMETERS: 1.25
THREAD SERIES DESIGNATOR: M
WIDTH BETWEEN FLATS: 13.0 MILLIMETERS NOMINAL
Related Searches:
DIN EN24017
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305011555438
NSN
5305-01-155-5438
MFG
DIN DEUTSCHES INSTITUT FUER NORMUNG EV
Description
FASTENER LENGTH: 18.00 MILLIMETERS NOMINAL
HARDNESS RATING: 18.0 ROCKWELL C MINIMUM AND 31.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 5.5 MILLIMETERS NOMINAL
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL PROPERTY CLASS 8.8 OVERALL
MINIMUM TENSILE STRENGTH: 113784 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 8.0 MILLIMETERS
SURFACE TREATMENT: ZINC OVERALL
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 16.5 MILLIMETERS MINIMUM AND 18.0 MILLIMETERS MAXIMUM
THREAD PITCH IN MILLIMETERS: 1.25
THREAD SERIES DESIGNATOR: M
WIDTH BETWEEN FLATS: 13.0 MILLIMETERS NOMINAL
Related Searches:
DIN933-M8X18-8.8-A2L
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305011555438
NSN
5305-01-155-5438
DIN933-M8X18-8.8-A2L
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305011555438
NSN
5305-01-155-5438
MFG
DIN DEUTSCHES INSTITUT FUER NORMUNG EV
Description
FASTENER LENGTH: 18.00 MILLIMETERS NOMINAL
HARDNESS RATING: 18.0 ROCKWELL C MINIMUM AND 31.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 5.5 MILLIMETERS NOMINAL
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL PROPERTY CLASS 8.8 OVERALL
MINIMUM TENSILE STRENGTH: 113784 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 8.0 MILLIMETERS
SURFACE TREATMENT: ZINC OVERALL
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 16.5 MILLIMETERS MINIMUM AND 18.0 MILLIMETERS MAXIMUM
THREAD PITCH IN MILLIMETERS: 1.25
THREAD SERIES DESIGNATOR: M
WIDTH BETWEEN FLATS: 13.0 MILLIMETERS NOMINAL
Related Searches:
ISO4017-M8X18-8-8-A2L
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305011555438
NSN
5305-01-155-5438
ISO4017-M8X18-8-8-A2L
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305011555438
NSN
5305-01-155-5438
MFG
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION ISO
Description
FASTENER LENGTH: 18.00 MILLIMETERS NOMINAL
HARDNESS RATING: 18.0 ROCKWELL C MINIMUM AND 31.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 5.5 MILLIMETERS NOMINAL
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL PROPERTY CLASS 8.8 OVERALL
MINIMUM TENSILE STRENGTH: 113784 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 8.0 MILLIMETERS
SURFACE TREATMENT: ZINC OVERALL
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 16.5 MILLIMETERS MINIMUM AND 18.0 MILLIMETERS MAXIMUM
THREAD PITCH IN MILLIMETERS: 1.25
THREAD SERIES DESIGNATOR: M
WIDTH BETWEEN FLATS: 13.0 MILLIMETERS NOMINAL
Related Searches:
10501757
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305011555439
NSN
5305-01-155-5439
MFG
GENERAL DYNAMICS LAND SYSTEMS CANADA CORP
Description
FASTENER LENGTH: 16.00 MILLIMETERS NOMINAL
HARDNESS RATING: 18.0 ROCKWELL C MINIMUM AND 31.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 4.5 MILLIMETERS NOMINAL
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL PROPERTY CLASS 8.8 OVERALL
MINIMUM TENSILE STRENGTH: 11378 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 6.0 MILLIMETERS
SURFACE TREATMENT: ZINC OVERALL
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 14.0 MILLIMETERS MINIMUM AND 16.0 MILLIMETERS MAXIMUM
THREAD PITCH IN MILLIMETERS: 1.0
THREAD SERIES DESIGNATOR: M
WIDTH BETWEEN FLATS: 10.0 MILLIMETERS NOMINAL
Related Searches:
19M7560
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305011555439
NSN
5305-01-155-5439
MFG
DEERE & CO
Description
FASTENER LENGTH: 16.00 MILLIMETERS NOMINAL
HARDNESS RATING: 18.0 ROCKWELL C MINIMUM AND 31.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 4.5 MILLIMETERS NOMINAL
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL PROPERTY CLASS 8.8 OVERALL
MINIMUM TENSILE STRENGTH: 11378 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 6.0 MILLIMETERS
SURFACE TREATMENT: ZINC OVERALL
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 14.0 MILLIMETERS MINIMUM AND 16.0 MILLIMETERS MAXIMUM
THREAD PITCH IN MILLIMETERS: 1.0
THREAD SERIES DESIGNATOR: M
WIDTH BETWEEN FLATS: 10.0 MILLIMETERS NOMINAL
Related Searches:
19M7560
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305011555439
NSN
5305-01-155-5439
MFG
DEERE & COMPANY DBA JOHN DEERE DIV WORLDWIDE LOGISTICS
Description
FASTENER LENGTH: 16.00 MILLIMETERS NOMINAL
HARDNESS RATING: 18.0 ROCKWELL C MINIMUM AND 31.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 4.5 MILLIMETERS NOMINAL
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL PROPERTY CLASS 8.8 OVERALL
MINIMUM TENSILE STRENGTH: 11378 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 6.0 MILLIMETERS
SURFACE TREATMENT: ZINC OVERALL
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 14.0 MILLIMETERS MINIMUM AND 16.0 MILLIMETERS MAXIMUM
THREAD PITCH IN MILLIMETERS: 1.0
THREAD SERIES DESIGNATOR: M
WIDTH BETWEEN FLATS: 10.0 MILLIMETERS NOMINAL