My Quote Request
5305-01-166-6361
20 Products
10512729
SCREW
NSN, MFG P/N
5305011666361
NSN
5305-01-166-6361
MFG
GENERAL DYNAMICS LAND SYSTEMS CANADA CORP
Description
SCREW
Related Searches:
71661
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305011665910
NSN
5305-01-166-5910
MFG
CRANE PUMPS & SYSTEMS INC.
Description
SCREW,CAP,HEXAGON HEAD
Related Searches:
12321624
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305011665955
NSN
5305-01-166-5955
12321624
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305011665955
NSN
5305-01-166-5955
MFG
U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.060 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FOURTH DIAMETER: 0.970 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER: 0.430 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER: 0.740 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 4
FASTENER LENGTH: 1.620 INCHES NOMINAL
FIRST DIAMETER FROM HEAD: 0.440 INCHES NOMINAL
FOURTH DIAMETER FROM HEAD: 0.190 INCHES NOMINAL
HEAD DIAMETER: 0.620 INCHES NOMINAL
HEAD HEIGHT: 0.150 INCHES NOMINAL
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D14 SLOT
MANUFACTURERS CODE: 19207
MATERIAL: STEEL OVERALL
MFR SOURCE CONTROLLING REFERENCE: 12321624
NOMINAL THREAD DIAMETER: 0.190 INCHES
SECOND DIAMETER FROM HEAD: 0.320 INCHES NOMINAL
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
THIRD DIAMETER FROM HEAD: 0.375 INCHES NOMINAL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.500 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
P14-2854
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305011665955
NSN
5305-01-166-5955
P14-2854
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305011665955
NSN
5305-01-166-5955
MFG
DONALDSON COMPANY INC. DBA TORIT PRODUCTS
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.060 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FOURTH DIAMETER: 0.970 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER: 0.430 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER: 0.740 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 4
FASTENER LENGTH: 1.620 INCHES NOMINAL
FIRST DIAMETER FROM HEAD: 0.440 INCHES NOMINAL
FOURTH DIAMETER FROM HEAD: 0.190 INCHES NOMINAL
HEAD DIAMETER: 0.620 INCHES NOMINAL
HEAD HEIGHT: 0.150 INCHES NOMINAL
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D14 SLOT
MANUFACTURERS CODE: 19207
MATERIAL: STEEL OVERALL
MFR SOURCE CONTROLLING REFERENCE: 12321624
NOMINAL THREAD DIAMETER: 0.190 INCHES
SECOND DIAMETER FROM HEAD: 0.320 INCHES NOMINAL
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
THIRD DIAMETER FROM HEAD: 0.375 INCHES NOMINAL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.500 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
SFSW10F9CPL13GY
SCREW,MACHINE
NSN, MFG P/N
5305011666137
NSN
5305-01-166-6137
MFG
DUPREE INC . DBA STAKE FASTENER USE CAGE CODE 66071 FOR CATALOGING.
Description
FASTENER LENGTH: 0.532 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
HEAD DIAMETER: 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM
HEAD HEIGHT: 0.174 INCHES MINIMUM AND 0.184 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 310 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 309
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPECIAL FEATURES: FURNISHED WITH BOOT TYPE NYLON WASHER 0.500 IN. O.D,HEAD AND WASHER COLOR GRAY PER FED STD 595 NO. 36231
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.470 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
HAP-0020-01
SCREW,SHOULDER
NSN, MFG P/N
5305011666138
NSN
5305-01-166-6138
MFG
HUTSON AEROSPACE INC SUB OF TELEFLEX INC
Description
SCREW,SHOULDER
Related Searches:
MS3369B522
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011666139
NSN
5305-01-166-6139
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.677 INCHES MINIMUM AND 1.697 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.853 INCHES MINIMUM AND 1.873 INCHES MAXIMUM
GRIP DIAMETER: 0.3112 INCHES MINIMUM AND 0.3117 INCHES MAXIMUM
GRIP LENGTH: 1.375 INCHES MINIMUM AND 1.391 INCHES MAXIMUM
HEAD HEIGHT: 0.157 INCHES MINIMUM AND 0.172 INCHES MAXIMUM
HEAD STYLE: C4 CROWNED HEXAGON
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SPECIAL FEATURES: RETAINING ELEMENT IN SHANK
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.306 INCHES MINIMUM AND 0.357 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
Related Searches:
MS3369B522
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011666139
NSN
5305-01-166-6139
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.677 INCHES MINIMUM AND 1.697 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.853 INCHES MINIMUM AND 1.873 INCHES MAXIMUM
GRIP DIAMETER: 0.3112 INCHES MINIMUM AND 0.3117 INCHES MAXIMUM
GRIP LENGTH: 1.375 INCHES MINIMUM AND 1.391 INCHES MAXIMUM
HEAD HEIGHT: 0.157 INCHES MINIMUM AND 0.172 INCHES MAXIMUM
HEAD STYLE: C4 CROWNED HEXAGON
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SPECIAL FEATURES: RETAINING ELEMENT IN SHANK
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.306 INCHES MINIMUM AND 0.357 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
Related Searches:
BACB30LU4-21
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011666140
NSN
5305-01-166-6140
MFG
VALLEY-TODECO INC.
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.722 INCHES MINIMUM AND 1.752 INCHES MAXIMUM
GRIP DIAMETER: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 1.302 INCHES MINIMUM AND 1.322 INCHES MAXIMUM
HEAD DIAMETER: 0.455 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE FINISH: 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.400 INCHES MINIMUM AND 0.450 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
BACB30LU4-21
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011666140
NSN
5305-01-166-6140
MFG
SPS TECHNOLOGIES LLC DBA AIR INDUSTRIES
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.722 INCHES MINIMUM AND 1.752 INCHES MAXIMUM
GRIP DIAMETER: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 1.302 INCHES MINIMUM AND 1.322 INCHES MAXIMUM
HEAD DIAMETER: 0.455 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE FINISH: 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.400 INCHES MINIMUM AND 0.450 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
BACB30LU4-21
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011666140
NSN
5305-01-166-6140
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.722 INCHES MINIMUM AND 1.752 INCHES MAXIMUM
GRIP DIAMETER: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 1.302 INCHES MINIMUM AND 1.322 INCHES MAXIMUM
HEAD DIAMETER: 0.455 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE FINISH: 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.400 INCHES MINIMUM AND 0.450 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
BACB30LU4-21
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011666140
NSN
5305-01-166-6140
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.722 INCHES MINIMUM AND 1.752 INCHES MAXIMUM
GRIP DIAMETER: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 1.302 INCHES MINIMUM AND 1.322 INCHES MAXIMUM
HEAD DIAMETER: 0.455 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE FINISH: 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.400 INCHES MINIMUM AND 0.450 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
BACB30LU4-21
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011666140
NSN
5305-01-166-6140
MFG
FEDERAL MANUFACTURING CORPORATION
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.722 INCHES MINIMUM AND 1.752 INCHES MAXIMUM
GRIP DIAMETER: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 1.302 INCHES MINIMUM AND 1.322 INCHES MAXIMUM
HEAD DIAMETER: 0.455 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE FINISH: 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.400 INCHES MINIMUM AND 0.450 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
BACB30LU4-21
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011666140
NSN
5305-01-166-6140
MFG
PAUL R. BRILES INC. DBA PB FASTENERS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.722 INCHES MINIMUM AND 1.752 INCHES MAXIMUM
GRIP DIAMETER: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 1.302 INCHES MINIMUM AND 1.322 INCHES MAXIMUM
HEAD DIAMETER: 0.455 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE FINISH: 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.400 INCHES MINIMUM AND 0.450 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
BACB30LU4-21
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011666140
NSN
5305-01-166-6140
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.722 INCHES MINIMUM AND 1.752 INCHES MAXIMUM
GRIP DIAMETER: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 1.302 INCHES MINIMUM AND 1.322 INCHES MAXIMUM
HEAD DIAMETER: 0.455 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE FINISH: 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.400 INCHES MINIMUM AND 0.450 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
BACB30LU4-21
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011666140
NSN
5305-01-166-6140
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.722 INCHES MINIMUM AND 1.752 INCHES MAXIMUM
GRIP DIAMETER: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 1.302 INCHES MINIMUM AND 1.322 INCHES MAXIMUM
HEAD DIAMETER: 0.455 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE FINISH: 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.400 INCHES MINIMUM AND 0.450 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
BACB30LU4-21
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011666140
NSN
5305-01-166-6140
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.722 INCHES MINIMUM AND 1.752 INCHES MAXIMUM
GRIP DIAMETER: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 1.302 INCHES MINIMUM AND 1.322 INCHES MAXIMUM
HEAD DIAMETER: 0.455 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE FINISH: 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.400 INCHES MINIMUM AND 0.450 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
BACB30LU4-21
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011666140
NSN
5305-01-166-6140
MFG
HUCK INTL INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.722 INCHES MINIMUM AND 1.752 INCHES MAXIMUM
GRIP DIAMETER: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 1.302 INCHES MINIMUM AND 1.322 INCHES MAXIMUM
HEAD DIAMETER: 0.455 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE FINISH: 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.400 INCHES MINIMUM AND 0.450 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
BACB30LU4-21
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011666140
NSN
5305-01-166-6140
MFG
THE BOEING COMPANY DBA BOEING
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.722 INCHES MINIMUM AND 1.752 INCHES MAXIMUM
GRIP DIAMETER: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 1.302 INCHES MINIMUM AND 1.322 INCHES MAXIMUM
HEAD DIAMETER: 0.455 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE FINISH: 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.400 INCHES MINIMUM AND 0.450 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
10512729
SCREW
NSN, MFG P/N
5305011666361
NSN
5305-01-166-6361
MFG
GENERAL DYNAMICS LAND SYSTEMS CANADA CORP
Description
SCREW