My Quote Request
5305-01-175-0610
20 Products
CA21070-6-2HS
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305011750610
NSN
5305-01-175-0610
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TRIDAIR PRODUCTS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.925 INCHES MINIMUM AND 0.945 INCHES MAXIMUM
HEAD DIAMETER: 0.518 INCHES MINIMUM AND 0.528 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 8740 OR STEEL COMP 4140 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.635 INCHES MINIMUM AND 0.795 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.218 INCHES MINIMUM AND 0.221 INCHES MAXIMUM
Related Searches:
T20-0083
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305011750571
NSN
5305-01-175-0571
MFG
TAMPO INDUSTRIES INC
Description
SCREW,CAP,HEXAGON HEAD
Related Searches:
3M926-3D4
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011750608
NSN
5305-01-175-0608
MFG
FASTENER INNOVATION TECHNOLOGY INC DBA F.I.T.
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 0.520 INCHES MINIMUM AND 0.560 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 0.641 INCHES MINIMUM AND 0.671 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD DIAMETER: 0.297 INCHES MINIMUM AND 0.302 INCHES MAXIMUM
HEAD STYLE: C54 OVAL COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES MINIMUM AND 0.075 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: ALUMINUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-83488 TY 2 CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
3M926-3D4
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011750608
NSN
5305-01-175-0608
MFG
BOEING COMPANY THE DBA BOEING
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 0.520 INCHES MINIMUM AND 0.560 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 0.641 INCHES MINIMUM AND 0.671 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD DIAMETER: 0.297 INCHES MINIMUM AND 0.302 INCHES MAXIMUM
HEAD STYLE: C54 OVAL COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES MINIMUM AND 0.075 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: ALUMINUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-83488 TY 2 CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
3M926-3DL4
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011750608
NSN
5305-01-175-0608
MFG
BOEING COMPANY THE DBA BOEING
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 0.520 INCHES MINIMUM AND 0.560 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 0.641 INCHES MINIMUM AND 0.671 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD DIAMETER: 0.297 INCHES MINIMUM AND 0.302 INCHES MAXIMUM
HEAD STYLE: C54 OVAL COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES MINIMUM AND 0.075 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: ALUMINUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-83488 TY 2 CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4068-3D4
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011750608
NSN
5305-01-175-0608
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 0.520 INCHES MINIMUM AND 0.560 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 0.641 INCHES MINIMUM AND 0.671 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD DIAMETER: 0.297 INCHES MINIMUM AND 0.302 INCHES MAXIMUM
HEAD STYLE: C54 OVAL COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES MINIMUM AND 0.075 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: ALUMINUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-83488 TY 2 CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4068-3D4
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011750608
NSN
5305-01-175-0608
MFG
HI-SHEAR CORPORATION
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 0.520 INCHES MINIMUM AND 0.560 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 0.641 INCHES MINIMUM AND 0.671 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD DIAMETER: 0.297 INCHES MINIMUM AND 0.302 INCHES MAXIMUM
HEAD STYLE: C54 OVAL COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES MINIMUM AND 0.075 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: ALUMINUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-83488 TY 2 CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4068-3D4
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011750608
NSN
5305-01-175-0608
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 0.520 INCHES MINIMUM AND 0.560 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 0.641 INCHES MINIMUM AND 0.671 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD DIAMETER: 0.297 INCHES MINIMUM AND 0.302 INCHES MAXIMUM
HEAD STYLE: C54 OVAL COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES MINIMUM AND 0.075 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: ALUMINUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-83488 TY 2 CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4068-3D4
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011750608
NSN
5305-01-175-0608
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 0.520 INCHES MINIMUM AND 0.560 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 0.641 INCHES MINIMUM AND 0.671 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD DIAMETER: 0.297 INCHES MINIMUM AND 0.302 INCHES MAXIMUM
HEAD STYLE: C54 OVAL COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES MINIMUM AND 0.075 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: ALUMINUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-83488 TY 2 CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4068-3D4
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011750608
NSN
5305-01-175-0608
MFG
HUCK INTL INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 0.520 INCHES MINIMUM AND 0.560 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 0.641 INCHES MINIMUM AND 0.671 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD DIAMETER: 0.297 INCHES MINIMUM AND 0.302 INCHES MAXIMUM
HEAD STYLE: C54 OVAL COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES MINIMUM AND 0.075 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: ALUMINUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-83488 TY 2 CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4068-3D4A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011750608
NSN
5305-01-175-0608
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 0.520 INCHES MINIMUM AND 0.560 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 0.641 INCHES MINIMUM AND 0.671 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD DIAMETER: 0.297 INCHES MINIMUM AND 0.302 INCHES MAXIMUM
HEAD STYLE: C54 OVAL COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES MINIMUM AND 0.075 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: ALUMINUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-83488 TY 2 CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4068-3D4A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011750608
NSN
5305-01-175-0608
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 0.520 INCHES MINIMUM AND 0.560 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 0.641 INCHES MINIMUM AND 0.671 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD DIAMETER: 0.297 INCHES MINIMUM AND 0.302 INCHES MAXIMUM
HEAD STYLE: C54 OVAL COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES MINIMUM AND 0.075 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: ALUMINUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-83488 TY 2 CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4068-3D4A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011750608
NSN
5305-01-175-0608
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 0.520 INCHES MINIMUM AND 0.560 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 0.641 INCHES MINIMUM AND 0.671 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD DIAMETER: 0.297 INCHES MINIMUM AND 0.302 INCHES MAXIMUM
HEAD STYLE: C54 OVAL COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES MINIMUM AND 0.075 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: ALUMINUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-83488 TY 2 CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4068-3D4A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011750608
NSN
5305-01-175-0608
MFG
HI-SHEAR CORPORATION
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 0.520 INCHES MINIMUM AND 0.560 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 0.641 INCHES MINIMUM AND 0.671 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD DIAMETER: 0.297 INCHES MINIMUM AND 0.302 INCHES MAXIMUM
HEAD STYLE: C54 OVAL COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES MINIMUM AND 0.075 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: ALUMINUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-83488 TY 2 CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4068-3D4A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011750608
NSN
5305-01-175-0608
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 0.520 INCHES MINIMUM AND 0.560 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 0.641 INCHES MINIMUM AND 0.671 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD DIAMETER: 0.297 INCHES MINIMUM AND 0.302 INCHES MAXIMUM
HEAD STYLE: C54 OVAL COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES MINIMUM AND 0.075 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: ALUMINUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-83488 TY 2 CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4068-3D4A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011750608
NSN
5305-01-175-0608
MFG
SPS TECHNOLOGIES LTD TJ BROOKS DIVIS ION
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 0.520 INCHES MINIMUM AND 0.560 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 0.641 INCHES MINIMUM AND 0.671 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD DIAMETER: 0.297 INCHES MINIMUM AND 0.302 INCHES MAXIMUM
HEAD STYLE: C54 OVAL COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES MINIMUM AND 0.075 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: ALUMINUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-83488 TY 2 CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4068-3D4A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011750608
NSN
5305-01-175-0608
MFG
FASTENER INNOVATION TECHNOLOGY INC DBA F.I.T.
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 0.520 INCHES MINIMUM AND 0.560 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 0.641 INCHES MINIMUM AND 0.671 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD DIAMETER: 0.297 INCHES MINIMUM AND 0.302 INCHES MAXIMUM
HEAD STYLE: C54 OVAL COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES MINIMUM AND 0.075 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: ALUMINUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-83488 TY 2 CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
WC4024L3D4
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011750608
NSN
5305-01-175-0608
MFG
WEST COAST AEROSPACE INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 0.520 INCHES MINIMUM AND 0.560 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 0.641 INCHES MINIMUM AND 0.671 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD DIAMETER: 0.297 INCHES MINIMUM AND 0.302 INCHES MAXIMUM
HEAD STYLE: C54 OVAL COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES MINIMUM AND 0.075 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: ALUMINUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-83488 TY 2 CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
WC4068-3D4
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011750608
NSN
5305-01-175-0608
MFG
WEST COAST AEROSPACE INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 0.520 INCHES MINIMUM AND 0.560 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 0.641 INCHES MINIMUM AND 0.671 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD DIAMETER: 0.297 INCHES MINIMUM AND 0.302 INCHES MAXIMUM
HEAD STYLE: C54 OVAL COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES MINIMUM AND 0.075 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: ALUMINUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-83488 TY 2 CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
NAS1578C3R3
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011750609
NSN
5305-01-175-0609
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.534 INCHES MINIMUM AND 0.564 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM
HEAD DIAMETER: 0.360 INCHES MINIMUM AND 0.374 INCHES MAXIMUM
HEAD HEIGHT: 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD STYLE: C33 PAN NO. 2
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPECIAL FEATURES: INTERNAL DRIVE RIBBED
SPECIFICATION/STANDARD DATA: 80205-NAS1578 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.337 INCHES MINIMUM AND 0.387 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF