My Quote Request
5305-01-185-2807
20 Products
13084197
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305011852807
NSN
5305-01-185-2807
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN
Description
FASTENER LENGTH: 0.257 INCHES MINIMUM AND 0.287 INCHES MAXIMUM
HEAD DIAMETER: 0.341 INCHES MINIMUM AND 0.371 INCHES MAXIMUM
HEAD HEIGHT: 0.255 INCHES MINIMUM AND 0.285 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: ALUMINUM ALLOY 6061 HEAD STEEL COMP 301 PRIMARY WASHER STEEL COMP 302 SPRING IRON ALLOY 660 FASTENER
MATERIAL ACCOMMODATED THICKNESS: 0.032 INCHES MINIMUM AND 0.093 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225.8 FED SPEC SINGLE MATERIAL RESPONSE HEAD MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE PRIMARY WASHER ASTM A580 ASSN STD SINGLE MATERIAL RESPONSE SPRING AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SURFACE TREATMENT: ANODIZE HEAD PASSIVATE PRIMARY WASHER PASSIVATE SPRING ANODIZE STAND-OFF PASSIVATE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 TY 1 MIL SPEC SINGLE TREATMENT RESPONSE HEAD QQ-PSTDC2ATJBAQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING MIL-A-8625 TY 1 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
~1: FASTENER
Related Searches:
HT4069-3-2A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011852215
NSN
5305-01-185-2215
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
COUNTERSINK ANGLE: 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.516 INCHES MINIMUM AND 0.546 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
HEAD DIAMETER: 0.297 INCHES MINIMUM AND 0.302 INCHES MAXIMUM
HEAD STYLE: C54 OVAL COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: ALUMINUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-83488,TY 2,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
WC4069-3-2A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011852215
NSN
5305-01-185-2215
MFG
WEST COAST AEROSPACE INC
Description
COUNTERSINK ANGLE: 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.516 INCHES MINIMUM AND 0.546 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
HEAD DIAMETER: 0.297 INCHES MINIMUM AND 0.302 INCHES MAXIMUM
HEAD STYLE: C54 OVAL COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: ALUMINUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-83488,TY 2,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4048-4D27
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011852216
NSN
5305-01-185-2216
MFG
HI-SHEAR CORPORATION
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.866 INCHES MINIMUM AND 1.906 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.989 INCHES MINIMUM AND 2.019 INCHES MAXIMUM
GRIP DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 1.678 INCHES MINIMUM AND 1.698 INCHES MAXIMUM
HEAD DIAMETER: 0.390 INCHES MINIMUM AND 0.395 INCHES MAXIMUM
HEAD HEIGHT: 0.056 INCHES MINIMUM AND 0.064 INCHES MAXIMUM
HEAD STYLE: C55 OVAL COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.291 INCHES MINIMUM AND 0.341 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4048-4D27
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011852216
NSN
5305-01-185-2216
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.866 INCHES MINIMUM AND 1.906 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.989 INCHES MINIMUM AND 2.019 INCHES MAXIMUM
GRIP DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 1.678 INCHES MINIMUM AND 1.698 INCHES MAXIMUM
HEAD DIAMETER: 0.390 INCHES MINIMUM AND 0.395 INCHES MAXIMUM
HEAD HEIGHT: 0.056 INCHES MINIMUM AND 0.064 INCHES MAXIMUM
HEAD STYLE: C55 OVAL COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.291 INCHES MINIMUM AND 0.341 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4048-4D27
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011852216
NSN
5305-01-185-2216
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.866 INCHES MINIMUM AND 1.906 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.989 INCHES MINIMUM AND 2.019 INCHES MAXIMUM
GRIP DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 1.678 INCHES MINIMUM AND 1.698 INCHES MAXIMUM
HEAD DIAMETER: 0.390 INCHES MINIMUM AND 0.395 INCHES MAXIMUM
HEAD HEIGHT: 0.056 INCHES MINIMUM AND 0.064 INCHES MAXIMUM
HEAD STYLE: C55 OVAL COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.291 INCHES MINIMUM AND 0.341 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4048-4D27
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011852216
NSN
5305-01-185-2216
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.866 INCHES MINIMUM AND 1.906 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.989 INCHES MINIMUM AND 2.019 INCHES MAXIMUM
GRIP DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 1.678 INCHES MINIMUM AND 1.698 INCHES MAXIMUM
HEAD DIAMETER: 0.390 INCHES MINIMUM AND 0.395 INCHES MAXIMUM
HEAD HEIGHT: 0.056 INCHES MINIMUM AND 0.064 INCHES MAXIMUM
HEAD STYLE: C55 OVAL COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.291 INCHES MINIMUM AND 0.341 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4048-4D27
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011852216
NSN
5305-01-185-2216
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.866 INCHES MINIMUM AND 1.906 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.989 INCHES MINIMUM AND 2.019 INCHES MAXIMUM
GRIP DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 1.678 INCHES MINIMUM AND 1.698 INCHES MAXIMUM
HEAD DIAMETER: 0.390 INCHES MINIMUM AND 0.395 INCHES MAXIMUM
HEAD HEIGHT: 0.056 INCHES MINIMUM AND 0.064 INCHES MAXIMUM
HEAD STYLE: C55 OVAL COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.291 INCHES MINIMUM AND 0.341 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4048-4D27
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011852216
NSN
5305-01-185-2216
MFG
HUCK INTL INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.866 INCHES MINIMUM AND 1.906 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.989 INCHES MINIMUM AND 2.019 INCHES MAXIMUM
GRIP DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 1.678 INCHES MINIMUM AND 1.698 INCHES MAXIMUM
HEAD DIAMETER: 0.390 INCHES MINIMUM AND 0.395 INCHES MAXIMUM
HEAD HEIGHT: 0.056 INCHES MINIMUM AND 0.064 INCHES MAXIMUM
HEAD STYLE: C55 OVAL COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.291 INCHES MINIMUM AND 0.341 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4048-4D27
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011852216
NSN
5305-01-185-2216
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.866 INCHES MINIMUM AND 1.906 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.989 INCHES MINIMUM AND 2.019 INCHES MAXIMUM
GRIP DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 1.678 INCHES MINIMUM AND 1.698 INCHES MAXIMUM
HEAD DIAMETER: 0.390 INCHES MINIMUM AND 0.395 INCHES MAXIMUM
HEAD HEIGHT: 0.056 INCHES MINIMUM AND 0.064 INCHES MAXIMUM
HEAD STYLE: C55 OVAL COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.291 INCHES MINIMUM AND 0.341 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
ST3M713-4D27-1
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011852216
NSN
5305-01-185-2216
MFG
BOEING COMPANY THE DBA BOEING
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.866 INCHES MINIMUM AND 1.906 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.989 INCHES MINIMUM AND 2.019 INCHES MAXIMUM
GRIP DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 1.678 INCHES MINIMUM AND 1.698 INCHES MAXIMUM
HEAD DIAMETER: 0.390 INCHES MINIMUM AND 0.395 INCHES MAXIMUM
HEAD HEIGHT: 0.056 INCHES MINIMUM AND 0.064 INCHES MAXIMUM
HEAD STYLE: C55 OVAL COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.291 INCHES MINIMUM AND 0.341 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
ST3M713-4D27-1
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011852216
NSN
5305-01-185-2216
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.866 INCHES MINIMUM AND 1.906 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.989 INCHES MINIMUM AND 2.019 INCHES MAXIMUM
GRIP DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 1.678 INCHES MINIMUM AND 1.698 INCHES MAXIMUM
HEAD DIAMETER: 0.390 INCHES MINIMUM AND 0.395 INCHES MAXIMUM
HEAD HEIGHT: 0.056 INCHES MINIMUM AND 0.064 INCHES MAXIMUM
HEAD STYLE: C55 OVAL COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.291 INCHES MINIMUM AND 0.341 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
AS169-4-10
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011852597
NSN
5305-01-185-2597
MFG
AVIBANK MFG. INC.
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 0.948 INCHES MINIMUM AND 0.968 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.043 INCHES MINIMUM AND 1.063 INCHES MAXIMUM
GRIP DIAMETER: 0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
GRIP LENGTH: 0.625 INCHES MINIMUM AND 0.641 INCHES MAXIMUM
HEAD HEIGHT: 0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM
HEAD STYLE: C4 CROWNED HEXAGON
INTERNAL DRIVE STYLE: D14 SLOT
LOCKING FEATURE: DETENT BALL GRIP
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 63000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.277 INCHES MINIMUM AND 0.328 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
Related Searches:
CA2658-4-10
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011852597
NSN
5305-01-185-2597
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TRIDAIR PRODUCTS
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 0.948 INCHES MINIMUM AND 0.968 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.043 INCHES MINIMUM AND 1.063 INCHES MAXIMUM
GRIP DIAMETER: 0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
GRIP LENGTH: 0.625 INCHES MINIMUM AND 0.641 INCHES MAXIMUM
HEAD HEIGHT: 0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM
HEAD STYLE: C4 CROWNED HEXAGON
INTERNAL DRIVE STYLE: D14 SLOT
LOCKING FEATURE: DETENT BALL GRIP
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 63000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.277 INCHES MINIMUM AND 0.328 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
Related Searches:
MS3369-410
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011852597
NSN
5305-01-185-2597
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 0.948 INCHES MINIMUM AND 0.968 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.043 INCHES MINIMUM AND 1.063 INCHES MAXIMUM
GRIP DIAMETER: 0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
GRIP LENGTH: 0.625 INCHES MINIMUM AND 0.641 INCHES MAXIMUM
HEAD HEIGHT: 0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM
HEAD STYLE: C4 CROWNED HEXAGON
INTERNAL DRIVE STYLE: D14 SLOT
LOCKING FEATURE: DETENT BALL GRIP
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 63000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.277 INCHES MINIMUM AND 0.328 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
Related Searches:
MS3369B410
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011852597
NSN
5305-01-185-2597
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 0.948 INCHES MINIMUM AND 0.968 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.043 INCHES MINIMUM AND 1.063 INCHES MAXIMUM
GRIP DIAMETER: 0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
GRIP LENGTH: 0.625 INCHES MINIMUM AND 0.641 INCHES MAXIMUM
HEAD HEIGHT: 0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM
HEAD STYLE: C4 CROWNED HEXAGON
INTERNAL DRIVE STYLE: D14 SLOT
LOCKING FEATURE: DETENT BALL GRIP
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 63000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.277 INCHES MINIMUM AND 0.328 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
Related Searches:
MS3369B410
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011852597
NSN
5305-01-185-2597
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 0.948 INCHES MINIMUM AND 0.968 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.043 INCHES MINIMUM AND 1.063 INCHES MAXIMUM
GRIP DIAMETER: 0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
GRIP LENGTH: 0.625 INCHES MINIMUM AND 0.641 INCHES MAXIMUM
HEAD HEIGHT: 0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM
HEAD STYLE: C4 CROWNED HEXAGON
INTERNAL DRIVE STYLE: D14 SLOT
LOCKING FEATURE: DETENT BALL GRIP
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 63000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.277 INCHES MINIMUM AND 0.328 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
Related Searches:
105057625
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305011852806
NSN
5305-01-185-2806
MFG
MOOG AIRCRAFT GROUP - WOLVERHAMPTON OPERATIONS
Description
DESIGN CONTROL REFERENCE: 105057625
FASTENER LENGTH: 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM
HEAD DIAMETER: 0.212 INCHES MINIMUM AND 0.233 INCHES MAXIMUM
HEAD HEIGHT: 0.135 INCHES MINIMUM AND 0.138 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
HOLE CONFIGURATION STYLE: E11 ROUND INTERNAL HEXAGON
HOLE DIAMETER: 0.029 INCHES MINIMUM AND 0.033 INCHES MAXIMUM
HOLE QUANTITY: 4
HOLE TYPE: DRILLED
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: K0648
NOMINAL THREAD DIAMETER: 0.138 INCHES
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.228 INCHES MINIMUM AND 0.310 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.094 INCHES NOMINAL
Related Searches:
13084197
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305011852807
NSN
5305-01-185-2807
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN
Description
FASTENER LENGTH: 0.257 INCHES MINIMUM AND 0.287 INCHES MAXIMUM
HEAD DIAMETER: 0.341 INCHES MINIMUM AND 0.371 INCHES MAXIMUM
HEAD HEIGHT: 0.255 INCHES MINIMUM AND 0.285 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: ALUMINUM ALLOY 6061 HEAD STEEL COMP 301 PRIMARY WASHER STEEL COMP 302 SPRING IRON ALLOY 660 FASTENER
MATERIAL ACCOMMODATED THICKNESS: 0.032 INCHES MINIMUM AND 0.093 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225.8 FED SPEC SINGLE MATERIAL RESPONSE HEAD MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE PRIMARY WASHER ASTM A580 ASSN STD SINGLE MATERIAL RESPONSE SPRING AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SURFACE TREATMENT: ANODIZE HEAD PASSIVATE PRIMARY WASHER PASSIVATE SPRING ANODIZE STAND-OFF PASSIVATE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 TY 1 MIL SPEC SINGLE TREATMENT RESPONSE HEAD QQ-PSTDC2ATJBAQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING MIL-A-8625 TY 1 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
~1: FASTENER
Related Searches:
13084197
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305011852807
NSN
5305-01-185-2807
MFG
PROGRAM MANAGER ADVANCED ATTACK HELICOPTER BARCOM AMCPM-AAH
Description
FASTENER LENGTH: 0.257 INCHES MINIMUM AND 0.287 INCHES MAXIMUM
HEAD DIAMETER: 0.341 INCHES MINIMUM AND 0.371 INCHES MAXIMUM
HEAD HEIGHT: 0.255 INCHES MINIMUM AND 0.285 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: ALUMINUM ALLOY 6061 HEAD STEEL COMP 301 PRIMARY WASHER STEEL COMP 302 SPRING IRON ALLOY 660 FASTENER
MATERIAL ACCOMMODATED THICKNESS: 0.032 INCHES MINIMUM AND 0.093 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225.8 FED SPEC SINGLE MATERIAL RESPONSE HEAD MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE PRIMARY WASHER ASTM A580 ASSN STD SINGLE MATERIAL RESPONSE SPRING AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SURFACE TREATMENT: ANODIZE HEAD PASSIVATE PRIMARY WASHER PASSIVATE SPRING ANODIZE STAND-OFF PASSIVATE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 TY 1 MIL SPEC SINGLE TREATMENT RESPONSE HEAD QQ-PSTDC2ATJBAQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING MIL-A-8625 TY 1 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
~1: FASTENER