My Quote Request
5305-01-200-9876
20 Products
3M1034C5-12-23
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305012009876
NSN
5305-01-200-9876
MFG
BOEING COMPANY THE DBA BOEING
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.266 INCHES MINIMUM AND 1.296 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
HEAD DIAMETER: 0.625 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: TAPPED HOLE IN HEAD 0.1380-32,UNJC-3B THREADS. DISTANCE FROM TOP OF HEAD TO INJECTION PORT 0.230 INCH. INJECTION PORT 0.120 IN. LG,0.060 IN. WIDE
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.506 INCHES MINIMUM AND 0.556 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
9419950
SCREW,TAPPING
NSN, MFG P/N
5305012009869
NSN
5305-01-200-9869
MFG
GENERAL MOTORS CORP
Description
EXTENDED WASHER DIAMETER: 0.322 INCHES MINIMUM AND 0.348 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.019 INCHES MINIMUM AND 0.031 INCHES MAXIMUM
FASTENER LENGTH: 0.408 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
HEAD HEIGHT: 0.096 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
HEAD STYLE: C7 HEXAGON EXTENDED WASHER
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.164 INCHES
NONMACHINE THREAD STYLE: A4 WIDE FLUTE (TYPE T)
WIDTH BETWEEN FLATS: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
Related Searches:
10524484
SCREW,MACHINE
NSN, MFG P/N
5305012009870
NSN
5305-01-200-9870
MFG
GENERAL DYNAMICS LAND SYSTEMS CANADA CORP
Description
DESIGN CONTROL REFERENCE: 130-143
MANUFACTURERS CODE: 36513
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING
THE MANUFACTURERS DATA:
Related Searches:
130-143
SCREW,MACHINE
NSN, MFG P/N
5305012009870
NSN
5305-01-200-9870
MFG
ATLAS POLAR CO LTD
Description
DESIGN CONTROL REFERENCE: 130-143
MANUFACTURERS CODE: 36513
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING
THE MANUFACTURERS DATA:
Related Searches:
2CD356
SCREW,MACHINE
NSN, MFG P/N
5305012009870
NSN
5305-01-200-9870
MFG
OSHKOSH CORPORATION
Description
DESIGN CONTROL REFERENCE: 130-143
MANUFACTURERS CODE: 36513
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING
THE MANUFACTURERS DATA:
Related Searches:
AN500AD10-14
SCREW,MACHINE
NSN, MFG P/N
5305012009871
NSN
5305-01-200-9871
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN500AD10-14
FASTENER LENGTH: 0.844 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
HEAD DIAMETER: 0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM
HEAD HEIGHT: 0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
HEAD HOLE CONFIGURATION STYLE: C8 ROUND
HEAD STYLE: A33 FILLISTER
HOLE DIAMETER: 0.045 INCHES MINIMUM AND 0.050 INCHES MAXIMUM
HOLE QUANTITY: 1
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
NOMINAL THREAD DIAMETER: 0.190 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-92
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 4C STYLE
SCREW MATERIAL: STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 316 OR STEEL COMP 303SE
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.761 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
Related Searches:
FF-S-92
SCREW,MACHINE
NSN, MFG P/N
5305012009871
NSN
5305-01-200-9871
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN500AD10-14
FASTENER LENGTH: 0.844 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
HEAD DIAMETER: 0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM
HEAD HEIGHT: 0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
HEAD HOLE CONFIGURATION STYLE: C8 ROUND
HEAD STYLE: A33 FILLISTER
HOLE DIAMETER: 0.045 INCHES MINIMUM AND 0.050 INCHES MAXIMUM
HOLE QUANTITY: 1
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
NOMINAL THREAD DIAMETER: 0.190 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-92
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 4C STYLE
SCREW MATERIAL: STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 316 OR STEEL COMP 303SE
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.761 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
Related Searches:
FF-S-92
SCREW,MACHINE
NSN, MFG P/N
5305012009872
NSN
5305-01-200-9872
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35274-82
FASTENER LENGTH: 0.844 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
HEAD DIAMETER: 0.389 INCHES MINIMUM AND 0.414 INCHES MAXIMUM
HEAD HEIGHT: 0.161 INCHES MINIMUM AND 0.170 INCHES MAXIMUM
HEAD HOLE CONFIGURATION STYLE: C8 ROUND
HEAD STYLE: A33 FILLISTER
HOLE DIAMETER: 0.062 INCHES NOMINAL
HOLE QUANTITY: 1
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MINIMUM TENSILE STRENGTH: 57000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 8S STYLE
SCREW MATERIAL: COPPER ALLOY 230 OR COPPER ALLOY 240 OR COPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 270 OR COPPER ALLOY 342 OR COPPER ALLOY 353 OR COPPER ALLOY 360 OR COPPER ALLOY 377 OR COPPER ALLOY 462 OR COPPER ALLOY 464 OR COPPER ALLOY 482 OR COPPER ALLOY
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.773 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
~1: 485 OR COPPER ALLOY 510 OR COPPER ALLOY 745 OR COPPER ALLOY 752 OR COPPER ALLOY 764 OR COPPER ALLOY 770
Related Searches:
MS35274-82
SCREW,MACHINE
NSN, MFG P/N
5305012009872
NSN
5305-01-200-9872
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35274-82
FASTENER LENGTH: 0.844 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
HEAD DIAMETER: 0.389 INCHES MINIMUM AND 0.414 INCHES MAXIMUM
HEAD HEIGHT: 0.161 INCHES MINIMUM AND 0.170 INCHES MAXIMUM
HEAD HOLE CONFIGURATION STYLE: C8 ROUND
HEAD STYLE: A33 FILLISTER
HOLE DIAMETER: 0.062 INCHES NOMINAL
HOLE QUANTITY: 1
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MINIMUM TENSILE STRENGTH: 57000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 8S STYLE
SCREW MATERIAL: COPPER ALLOY 230 OR COPPER ALLOY 240 OR COPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 270 OR COPPER ALLOY 342 OR COPPER ALLOY 353 OR COPPER ALLOY 360 OR COPPER ALLOY 377 OR COPPER ALLOY 462 OR COPPER ALLOY 464 OR COPPER ALLOY 482 OR COPPER ALLOY
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.773 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
~1: 485 OR COPPER ALLOY 510 OR COPPER ALLOY 745 OR COPPER ALLOY 752 OR COPPER ALLOY 764 OR COPPER ALLOY 770
Related Searches:
12A2027
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305012009873
NSN
5305-01-200-9873
MFG
LINK-BELT CONSTRUCTION EQUIPMENT COMPANY L.P. LLLP
Description
FASTENER LENGTH: 15.000 INCHES NOMINAL
HEAD HEIGHT: 0.455 INCHES MINIMUM AND 0.483 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.750 INCHES
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 2.000 INCHES MINIMUM
THREAD QUANTITY PER INCH: 16
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 1.088 INCHES MINIMUM AND 1.125 INCHES MAXIMUM
Related Searches:
1X.6967
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305012009873
NSN
5305-01-200-9873
MFG
LINK-BELT CONSTRUCTION EQUIPMENT COMPANY L.P. LLLP
Description
FASTENER LENGTH: 15.000 INCHES NOMINAL
HEAD HEIGHT: 0.455 INCHES MINIMUM AND 0.483 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.750 INCHES
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 2.000 INCHES MINIMUM
THREAD QUANTITY PER INCH: 16
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 1.088 INCHES MINIMUM AND 1.125 INCHES MAXIMUM
Related Searches:
NAS1578A3R18
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305012009874
NSN
5305-01-200-9874
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 1.473 INCHES MINIMUM AND 1.503 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.360 INCHES MINIMUM AND 0.374 INCHES MAXIMUM
HEAD HEIGHT: 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD STYLE: C33 PAN NO. 2
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150 OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPECIAL FEATURES: INTERNAL DRIVE RIBBED
SPECIFICATION/STANDARD DATA: 80205-NAS1578 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.338 INCHES MINIMUM AND 0.388 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
NAS1578A3T18
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305012009874
NSN
5305-01-200-9874
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 1.473 INCHES MINIMUM AND 1.503 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.360 INCHES MINIMUM AND 0.374 INCHES MAXIMUM
HEAD HEIGHT: 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD STYLE: C33 PAN NO. 2
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150 OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPECIAL FEATURES: INTERNAL DRIVE RIBBED
SPECIFICATION/STANDARD DATA: 80205-NAS1578 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.338 INCHES MINIMUM AND 0.388 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
3M1034C5-10-34
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305012009875
NSN
5305-01-200-9875
MFG
BOEING COMPANY THE DBA BOEING
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.141 INCHES MINIMUM AND 1.171 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD DIAMETER: 0.625 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: TAPPED HOLE IN HEAD 0.1380-32,UNJC-3B THREADS. DISTANCE FROM TOP OF HEAD TO INJECTION PORT 0.340 INCH. INJECTION PORT 0.120 IN. LG,0.060 IN. WIDE
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.506 INCHES MINIMUM AND 0.556 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4075D5-10-34
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305012009875
NSN
5305-01-200-9875
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.141 INCHES MINIMUM AND 1.171 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD DIAMETER: 0.625 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: TAPPED HOLE IN HEAD 0.1380-32,UNJC-3B THREADS. DISTANCE FROM TOP OF HEAD TO INJECTION PORT 0.340 INCH. INJECTION PORT 0.120 IN. LG,0.060 IN. WIDE
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.506 INCHES MINIMUM AND 0.556 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4075D5-10-34
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305012009875
NSN
5305-01-200-9875
MFG
HI-SHEAR CORPORATION
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.141 INCHES MINIMUM AND 1.171 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD DIAMETER: 0.625 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: TAPPED HOLE IN HEAD 0.1380-32,UNJC-3B THREADS. DISTANCE FROM TOP OF HEAD TO INJECTION PORT 0.340 INCH. INJECTION PORT 0.120 IN. LG,0.060 IN. WIDE
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.506 INCHES MINIMUM AND 0.556 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4075D5-10-34
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305012009875
NSN
5305-01-200-9875
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.141 INCHES MINIMUM AND 1.171 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD DIAMETER: 0.625 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: TAPPED HOLE IN HEAD 0.1380-32,UNJC-3B THREADS. DISTANCE FROM TOP OF HEAD TO INJECTION PORT 0.340 INCH. INJECTION PORT 0.120 IN. LG,0.060 IN. WIDE
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.506 INCHES MINIMUM AND 0.556 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4075D5-10-34
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305012009875
NSN
5305-01-200-9875
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.141 INCHES MINIMUM AND 1.171 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD DIAMETER: 0.625 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: TAPPED HOLE IN HEAD 0.1380-32,UNJC-3B THREADS. DISTANCE FROM TOP OF HEAD TO INJECTION PORT 0.340 INCH. INJECTION PORT 0.120 IN. LG,0.060 IN. WIDE
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.506 INCHES MINIMUM AND 0.556 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4075D5-10-34
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305012009875
NSN
5305-01-200-9875
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.141 INCHES MINIMUM AND 1.171 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD DIAMETER: 0.625 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: TAPPED HOLE IN HEAD 0.1380-32,UNJC-3B THREADS. DISTANCE FROM TOP OF HEAD TO INJECTION PORT 0.340 INCH. INJECTION PORT 0.120 IN. LG,0.060 IN. WIDE
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.506 INCHES MINIMUM AND 0.556 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
3M1034C5-12-23
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305012009876
NSN
5305-01-200-9876
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.266 INCHES MINIMUM AND 1.296 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
HEAD DIAMETER: 0.625 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: TAPPED HOLE IN HEAD 0.1380-32,UNJC-3B THREADS. DISTANCE FROM TOP OF HEAD TO INJECTION PORT 0.230 INCH. INJECTION PORT 0.120 IN. LG,0.060 IN. WIDE
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.506 INCHES MINIMUM AND 0.556 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF