My Quote Request
5305-01-295-1069
20 Products
HT4025L7-27
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305012951069
NSN
5305-01-295-1069
MFG
HI-SHEAR CORPORATION
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 2.348 INCHES MINIMUM AND 2.378 INCHES MAXIMUM
GRIP DIAMETER: 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
GRIP LENGTH: 1.678 INCHES MINIMUM AND 1.698 INCHES MAXIMUM
HEAD DIAMETER: 0.880 INCHES MINIMUM AND 0.890 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.438 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.650 INCHES MINIMUM AND 0.700 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
5188013-007 REV A
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305012950096
NSN
5305-01-295-0096
5188013-007 REV A
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305012950096
NSN
5305-01-295-0096
MFG
NAVAL SEA SYSTEMS COMMAND
Description
FASTENER LENGTH: 0.845 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM FASTENER
HEAD DIAMETER: 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
HEAD HEIGHT: 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 FASTENER
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SPECIAL FEATURES: FURNISHED WITH FLAT WASHER PER NAS620C6 BRAZED TO SCREW IAW MIL-B-7883 TY OPTIONAL GR B
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.783 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNRC
WIDTH ACROSS FLATS: 0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM
Related Searches:
5188013-007 REV A
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305012950096
NSN
5305-01-295-0096
5188013-007 REV A
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305012950096
NSN
5305-01-295-0096
MFG
RAYTHEON COMPANY DBA RAYTHEON DIV MISSILE SYSTEMS
Description
FASTENER LENGTH: 0.845 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM FASTENER
HEAD DIAMETER: 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
HEAD HEIGHT: 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 FASTENER
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SPECIAL FEATURES: FURNISHED WITH FLAT WASHER PER NAS620C6 BRAZED TO SCREW IAW MIL-B-7883 TY OPTIONAL GR B
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.783 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNRC
WIDTH ACROSS FLATS: 0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM
Related Searches:
6532B860-1
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305012950324
NSN
5305-01-295-0324
MFG
INDAL TECHNOLOGIES INC
Description
DESIGN CONTROL REFERENCE: 6532B860-1
III END ITEM IDENTIFICATION: AIR LAUNCH AND RECOVERY EQPT
MANUFACTURERS CODE: 36334
THE MANUFACTURERS DATA:
Related Searches:
6532B860-1
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305012950324
NSN
5305-01-295-0324
MFG
NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION CODE 4.8.8.0.0.B BLDG 148-2
Description
DESIGN CONTROL REFERENCE: 6532B860-1
III END ITEM IDENTIFICATION: AIR LAUNCH AND RECOVERY EQPT
MANUFACTURERS CODE: 36334
THE MANUFACTURERS DATA:
Related Searches:
1D95631PK-001
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305012950604
NSN
5305-01-295-0604
MFG
NORTHROP GRUMMAN SYSTEMS CORPORATION DBA NORTHROP GRUMMAN MARINE SYSTEMS DIV MARINE SYSTEMS
Description
DESIGN CONTROL REFERENCE: 1D95631PK-001
FASTENER LENGTH: 4.250 INCHES NOMINAL
HEAD DIAMETER: 0.921 INCHES MINIMUM AND 0.937 INCHES MAXIMUM
HEAD HEIGHT: 0.616 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HEAD STYLE: C44 FILLISTER
HOLE CONFIGURATION STYLE: E11 ROUND INTERNAL HEXAGON
HOLE TYPE: DRILLED
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 90099
MATERIAL: STEEL CORROSION RESISTING OVERALL
NOMINAL THREAD DIAMETER: 0.625 INCHES
SPECIAL FEATURES: HOLE IN THREADED END 0.200 MIN. AND 0.330 MAX. IN. DIA.
SURFACE TREATMENT: PASSIVATE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.750 INCHES NOMINAL
THREAD SERIES DESIGNATOR: UNRC
Related Searches:
NAS8100-3
SCREW,MACHINE
NSN, MFG P/N
5305012951058
NSN
5305-01-295-1058
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.160 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
HEAD DIAMETER: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
HEAD HEIGHT: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: IRON ALLOY 660
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5737 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE
SPECIFICATION/STANDARD DATA: 80205-NAS8100 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.110 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
MS24694-S183
SCREW,MACHINE
NSN, MFG P/N
5305012951059
NSN
5305-01-295-1059
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.515 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.686 INCHES MINIMUM AND 0.762 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
SCREW MATERIAL: STEEL COMP 8740 OR STEEL COMP 8630
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.296 INCHES MINIMUM AND 0.374 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
Related Searches:
MS24694-S183
SCREW,MACHINE
NSN, MFG P/N
5305012951059
NSN
5305-01-295-1059
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.515 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.686 INCHES MINIMUM AND 0.762 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
SCREW MATERIAL: STEEL COMP 8740 OR STEEL COMP 8630
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.296 INCHES MINIMUM AND 0.374 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
Related Searches:
28710-94C-6B
SETSCREW
NSN, MFG P/N
5305012951062
NSN
5305-01-295-1062
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
COLOR: BLACK OVERALL
FASTENER LENGTH: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 384 OVERALL
NOMINAL THREAD DIAMETER: 0.112 INCHES
POINT STYLE: F16 CONE
SURFACE TREATMENT: OXIDE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNRC
WIDTH ACROSS FLATS: 0.050 INCHES NOMINAL
Related Searches:
803225-3
SETSCREW
NSN, MFG P/N
5305012951062
NSN
5305-01-295-1062
MFG
TEXAS INSTRUMENTS INCORPORATED DBA TEXAS INSTRUMENTS DIV SEMICONDUCTOR GROUP
Description
COLOR: BLACK OVERALL
FASTENER LENGTH: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 384 OVERALL
NOMINAL THREAD DIAMETER: 0.112 INCHES
POINT STYLE: F16 CONE
SURFACE TREATMENT: OXIDE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNRC
WIDTH ACROSS FLATS: 0.050 INCHES NOMINAL
Related Searches:
SM-C-808720-1
SETSCREW
NSN, MFG P/N
5305012951062
NSN
5305-01-295-1062
MFG
US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR
Description
COLOR: BLACK OVERALL
FASTENER LENGTH: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 384 OVERALL
NOMINAL THREAD DIAMETER: 0.112 INCHES
POINT STYLE: F16 CONE
SURFACE TREATMENT: OXIDE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNRC
WIDTH ACROSS FLATS: 0.050 INCHES NOMINAL
Related Searches:
210672-66
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305012951063
NSN
5305-01-295-1063
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
FASTENER LENGTH: 1.272 INCHES MINIMUM AND 1.312 INCHES MAXIMUM
HARDNESS RATING: 33.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.262 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.159 INCHES MINIMUM AND 0.164 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 OR STEEL COMP XM-7 OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.875 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.140 INCHES MINIMUM AND 0.142 INCHES MAXIMUM
Related Searches:
416863-821
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305012951063
NSN
5305-01-295-1063
MFG
RAYTHEON COMPANY
Description
FASTENER LENGTH: 1.272 INCHES MINIMUM AND 1.312 INCHES MAXIMUM
HARDNESS RATING: 33.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.262 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.159 INCHES MINIMUM AND 0.164 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 OR STEEL COMP XM-7 OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.875 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.140 INCHES MINIMUM AND 0.142 INCHES MAXIMUM
Related Searches:
5/16-18UNC-2A X 1-3/4 LG GR 5 ZN
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305012951064
NSN
5305-01-295-1064
5/16-18UNC-2A X 1-3/4 LG GR 5 ZN
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305012951064
NSN
5305-01-295-1064
MFG
AMERICAN NATIONAL STANDARDS INSTITUTE DBA A N S I
Description
FASTENER LENGTH: 1.710 INCHES MINIMUM AND 1.750 INCHES MAXIMUM
HEAD HEIGHT: 0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81349
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE J429 GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MIL-DTL-1222
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 5 GRADE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: ZINC AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM B633 TY 2 CL FE/ZN 13 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.875 INCHES NOMINAL
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
Related Searches:
5/8-18UNF-2A X 1-1/2 LG GR 5 ZN
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305012951065
NSN
5305-01-295-1065
5/8-18UNF-2A X 1-1/2 LG GR 5 ZN
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305012951065
NSN
5305-01-295-1065
MFG
AMERICAN NATIONAL STANDARDS INSTITUTE DBA A N S I
Description
FASTENER LENGTH: 1.020 INCHES MINIMUM AND 1.150 INCHES MAXIMUM
HEAD HEIGHT: 0.348 INCHES MINIMUM AND 0.371 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81349
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE J429 GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.562 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MIL-DTL-1222
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 5 GRADE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: ZINC AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM B633 TY 2 CL FE/ZN 13 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.375 INCHES NOMINAL
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.798 INCHES MINIMUM AND 0.812 INCHES MAXIMUM
Related Searches:
NAS1604-30
SCREW,SHOULDER
NSN, MFG P/N
5305012951067
NSN
5305-01-295-1067
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 2.329 INCHES MINIMUM AND 2.359 INCHES MAXIMUM
HEAD DIAMETER: 0.4640 INCHES MINIMUM AND 0.5066 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHOULDER DIAMETER: 0.2797 INCHES MINIMUM AND 0.2807 INCHES MAXIMUM FIRST SHOULDER
SHOULDER LENGTH: 1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPE: ROUND FIRST SHOULDER
SPECIFICATION/STANDARD DATA: 80205-NAS1604 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
NAS1604-30
SCREW,SHOULDER
NSN, MFG P/N
5305012951067
NSN
5305-01-295-1067
MFG
HI-SHEAR CORPORATION
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 2.329 INCHES MINIMUM AND 2.359 INCHES MAXIMUM
HEAD DIAMETER: 0.4640 INCHES MINIMUM AND 0.5066 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHOULDER DIAMETER: 0.2797 INCHES MINIMUM AND 0.2807 INCHES MAXIMUM FIRST SHOULDER
SHOULDER LENGTH: 1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPE: ROUND FIRST SHOULDER
SPECIFICATION/STANDARD DATA: 80205-NAS1604 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4025L7-27
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305012951069
NSN
5305-01-295-1069
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 2.348 INCHES MINIMUM AND 2.378 INCHES MAXIMUM
GRIP DIAMETER: 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
GRIP LENGTH: 1.678 INCHES MINIMUM AND 1.698 INCHES MAXIMUM
HEAD DIAMETER: 0.880 INCHES MINIMUM AND 0.890 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.438 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.650 INCHES MINIMUM AND 0.700 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4025L7-27
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305012951069
NSN
5305-01-295-1069
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 2.348 INCHES MINIMUM AND 2.378 INCHES MAXIMUM
GRIP DIAMETER: 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
GRIP LENGTH: 1.678 INCHES MINIMUM AND 1.698 INCHES MAXIMUM
HEAD DIAMETER: 0.880 INCHES MINIMUM AND 0.890 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.438 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.650 INCHES MINIMUM AND 0.700 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF