My Quote Request
5305-01-306-3506
20 Products
3070680-2
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013063506
NSN
5305-01-306-3506
MFG
HONEYWELL INTERNATIONAL INC. DBA HONEYWELL DIV AEROSPACE - PHOENIX
Description
DESIGN CONTROL REFERENCE: 3070680-2
FASTENER LENGTH: 0.704 INCHES NOMINAL
HEAD HEIGHT: 0.124 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 99193
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.183 INCHES
THE MANUFACTURERS DATA:
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.650 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.374 INCHES NOMINAL
Related Searches:
FF-S-85
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013063507
NSN
5305-01-306-3507
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS51488-2
FASTENER LENGTH: 0.938 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
HARDNESS RATING: 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE J429 GR 8 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 150000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-85
NONDEFINITIVE SPEC/STD DATA: 8 GRADE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: ZINC AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM B633 TY 2,FE/ZN5 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.750 INCHES MINIMUM AND 0.850 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
Related Searches:
MS51488-2
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013063507
NSN
5305-01-306-3507
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS51488-2
FASTENER LENGTH: 0.938 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
HARDNESS RATING: 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE J429 GR 8 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 150000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-85
NONDEFINITIVE SPEC/STD DATA: 8 GRADE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: ZINC AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM B633 TY 2,FE/ZN5 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.750 INCHES MINIMUM AND 0.850 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
Related Searches:
16101323
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013063508
NSN
5305-01-306-3508
MFG
FAIRBANKS MORSE ENGINE
Description
FASTENER LENGTH: 1.625 INCHES NOMINAL
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.328 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL COMP 4140 OVERALL
NOMINAL THREAD DIAMETER: 0.500 INCHES
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.375 INCHES NOMINAL
THREAD QUANTITY PER INCH: 13
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.750 INCHES NOMINAL
Related Searches:
CAFB9593B
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013063508
NSN
5305-01-306-3508
MFG
FAIRBANKS MORSE ENGINE
Description
FASTENER LENGTH: 1.625 INCHES NOMINAL
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.328 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL COMP 4140 OVERALL
NOMINAL THREAD DIAMETER: 0.500 INCHES
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.375 INCHES NOMINAL
THREAD QUANTITY PER INCH: 13
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.750 INCHES NOMINAL
Related Searches:
5646-3035
SCREW,SHOULDER
NSN, MFG P/N
5305013063509
NSN
5305-01-306-3509
MFG
EATON AEROSPACE
Description
FASTENER LENGTH: 4.754 INCHES NOMINAL
HEAD DIAMETER: 0.544 INCHES MINIMUM AND 0.548 INCHES MAXIMUM
HEAD HEIGHT: 0.300 INCHES NOMINAL
HEAD STYLE: C28 BEVEL-CONICAL
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.375 INCHES
SHOULDER DIAMETER: 0.390 INCHES NOMINAL FIRST SHOULDER
SHOULDER LENGTH: 4.254 INCHES MINIMUM AND 4.264 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPE: ROUND FIRST SHOULDER
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.490 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
5646-3049
SCREW,SHOULDER
NSN, MFG P/N
5305013063510
NSN
5305-01-306-3510
MFG
EATON AEROSPACE
Description
FASTENER LENGTH: 4.754 INCHES NOMINAL
HEAD DIAMETER: 0.516 INCHES MINIMUM AND 0.520 INCHES MAXIMUM
HEAD HEIGHT: 0.300 INCHES NOMINAL
HEAD STYLE: C28 BEVEL-CONICAL
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.375 INCHES
SHOULDER DIAMETER: 0.390 INCHES NOMINAL FIRST SHOULDER
SHOULDER LENGTH: 4.254 INCHES MINIMUM AND 4.264 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPE: ROUND FIRST SHOULDER
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.490 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
5784
SCREW,TAPPING
NSN, MFG P/N
5305013063513
NSN
5305-01-306-3513
MFG
AUTO VEHICLE PARTS CO DBA AU-VE-CO
Description
FASTENER LENGTH: 0.750 INCHES NOMINAL
NONMACHINE NOMINAL THREAD DIAMETER: 0.250 INCHES
NONMACHINE THREAD STYLE: A3 DOUBLE FLUTE (TYPE F)
SURFACE TREATMENT: CHROMATE ZINC OVERALL
Related Searches:
60514173-1
SCREW,MACHINE
NSN, MFG P/N
5305013063623
NSN
5305-01-306-3623
MFG
NORTHROP GRUMMAN GUIDANCE AND ELECTRONICS COMPANY INC. DIV LASER SYSTEMS
Description
DESIGN CONTROL REFERENCE: 60514173-1
FASTENER LENGTH: 0.320 INCHES NOMINAL
HEAD HEIGHT: 0.042 INCHES MINIMUM AND 0.044 INCHES MAXIMUM
HEAD STYLE: A1 HEXAGON
MANUFACTURERS CODE: 34860
NOMINAL THREAD DIAMETER: 0.086 INCHES
SCREW MATERIAL: STEEL COMP 316
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35,TY 2 FED SPEC SINGLE TREATMENT RESPONSE
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.290 INCHES MINIMUM
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.190 INCHES NOMINAL
Related Searches:
9M1758
SCREW,MACHINE
NSN, MFG P/N
5305013063624
NSN
5305-01-306-3624
MFG
CATERPILLAR INC. DBA CATERPILLAR DIV GOVERNMENTAL AND DEFENSE PRODUCTS
Description
SCREW,MACHINE
Related Searches:
NAS1635-08LR3
SCREW,MACHINE
NSN, MFG P/N
5305013063627
NSN
5305-01-306-3627
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.158 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
HEAD DIAMETER: 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD HEIGHT: 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
LOCKING FEATURE: PATCH
LOCKING FEATURE MATERIAL: PLASTIC POLYAMIDE
NOMINAL THREAD DIAMETER: 0.164 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM A380 ASSN STD SINGLE TREATMENT RESPONSE
SPECIFICATION/STANDARD DATA: 80205-NAS1635 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.096 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
LS15263-04-8
SCREW,MACHINE
NSN, MFG P/N
5305013063628
NSN
5305-01-306-3628
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN
Description
BEARING SURFACE OF HEAD SURFACE FINISH: 32.0 MICROINCHES
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HEAD DIAMETER: 0.178 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD HEIGHT: 0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE
SHANK SURFACE FINISH: 32.0 MICROINCHES
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.419 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNJC
THREAD SURFACE FINISH: 32.0 MICROINCHES
Related Searches:
LS15263-04-8
SCREW,MACHINE
NSN, MFG P/N
5305013063628
NSN
5305-01-306-3628
MFG
VALLEY-TODECO INC.
Description
BEARING SURFACE OF HEAD SURFACE FINISH: 32.0 MICROINCHES
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HEAD DIAMETER: 0.178 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD HEIGHT: 0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE
SHANK SURFACE FINISH: 32.0 MICROINCHES
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.419 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNJC
THREAD SURFACE FINISH: 32.0 MICROINCHES
Related Searches:
LS15263-04-8
SCREW,MACHINE
NSN, MFG P/N
5305013063628
NSN
5305-01-306-3628
MFG
SPS TECHNOLOGIES LLC DBA AIR INDUSTRIES
Description
BEARING SURFACE OF HEAD SURFACE FINISH: 32.0 MICROINCHES
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HEAD DIAMETER: 0.178 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD HEIGHT: 0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE
SHANK SURFACE FINISH: 32.0 MICROINCHES
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.419 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNJC
THREAD SURFACE FINISH: 32.0 MICROINCHES
Related Searches:
LS15263-04-8
SCREW,MACHINE
NSN, MFG P/N
5305013063628
NSN
5305-01-306-3628
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
BEARING SURFACE OF HEAD SURFACE FINISH: 32.0 MICROINCHES
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HEAD DIAMETER: 0.178 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD HEIGHT: 0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE
SHANK SURFACE FINISH: 32.0 MICROINCHES
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.419 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNJC
THREAD SURFACE FINISH: 32.0 MICROINCHES
Related Searches:
LS15263-04-8
SCREW,MACHINE
NSN, MFG P/N
5305013063628
NSN
5305-01-306-3628
MFG
PAUL R. BRILES INC. DBA PB FASTENERS
Description
BEARING SURFACE OF HEAD SURFACE FINISH: 32.0 MICROINCHES
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HEAD DIAMETER: 0.178 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD HEIGHT: 0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE
SHANK SURFACE FINISH: 32.0 MICROINCHES
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.419 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNJC
THREAD SURFACE FINISH: 32.0 MICROINCHES
Related Searches:
LS15263-04-8
SCREW,MACHINE
NSN, MFG P/N
5305013063628
NSN
5305-01-306-3628
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
BEARING SURFACE OF HEAD SURFACE FINISH: 32.0 MICROINCHES
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HEAD DIAMETER: 0.178 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD HEIGHT: 0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE
SHANK SURFACE FINISH: 32.0 MICROINCHES
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.419 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNJC
THREAD SURFACE FINISH: 32.0 MICROINCHES
Related Searches:
LS15263-04-8
SCREW,MACHINE
NSN, MFG P/N
5305013063628
NSN
5305-01-306-3628
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
BEARING SURFACE OF HEAD SURFACE FINISH: 32.0 MICROINCHES
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HEAD DIAMETER: 0.178 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD HEIGHT: 0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE
SHANK SURFACE FINISH: 32.0 MICROINCHES
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.419 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNJC
THREAD SURFACE FINISH: 32.0 MICROINCHES
Related Searches:
LS15264-3-7
SCREW,MACHINE
NSN, MFG P/N
5305013063629
NSN
5305-01-306-3629
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN
Description
BEARING SURFACE OF HEAD SURFACE FINISH: 32.0 MICROINCHES
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.407 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
HEAD DIAMETER: 0.322 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE
SHANK SURFACE FINISH: 32.0 MICROINCHES
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.265 INCHES MINIMUM AND 0.358 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
THREAD SURFACE FINISH: 32.0 MICROINCHES
Related Searches:
LS15264-3-9
SCREW,MACHINE
NSN, MFG P/N
5305013063630
NSN
5305-01-306-3630
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN
Description
BEARING SURFACE OF HEAD SURFACE FINISH: 32.0 MICROINCHES
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.531 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
HEAD DIAMETER: 0.371 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE
SHANK SURFACE FINISH: 32.0 MICROINCHES
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.389 INCHES MINIMUM AND 0.482 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
THREAD SURFACE FINISH: 32.0 MICROINCHES