My Quote Request
5305-01-317-4014
20 Products
NAS1131-20
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013174014
NSN
5305-01-317-4014
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 1.511 INCHES MINIMUM AND 1.541 INCHES MAXIMUM
GRIP DIAMETER: 0.1365 INCHES MINIMUM AND 0.1375 INCHES MAXIMUM
GRIP LENGTH: 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1131 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
NAS1131-5
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013174015
NSN
5305-01-317-4015
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.573 INCHES MINIMUM AND 0.603 INCHES MAXIMUM
GRIP DIAMETER: 0.1365 INCHES MINIMUM AND 0.1375 INCHES MAXIMUM
GRIP LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1131 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-426 TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
NAS1155-8R
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013174016
NSN
5305-01-317-4016
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.860 INCHES MINIMUM AND 0.890 INCHES MAXIMUM
GRIP DIAMETER: 0.311 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
GRIP LENGTH: 0.350 INCHES MINIMUM AND 0.400 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.577 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D25 TORQUE-SET RIBBED
MATERIAL: STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5656 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-8844 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1155 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.350 INCHES MINIMUM AND 0.400 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
4105-6X1/2TYPE-AB3
SCREW,TAPPING
NSN, MFG P/N
5305013174017
NSN
5305-01-317-4017
MFG
ROLLS-ROYCE INC
Description
FASTENER LENGTH: 0.500 INCHES NOMINAL
HEAD HEIGHT: 0.080 INCHES MINIMUM AND 0.093 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
INTERNAL DRIVE STYLE: D21 W/O INTERNAL DRIVE
MATERIAL: STEEL OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.138 INCHES
NONMACHINE THREAD STYLE: A13 GIMLET POINT (TYPE A, AB OR BA)
SURFACE TREATMENT: ZINC OVERALL
WIDTH BETWEEN FLATS: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
Related Searches:
4105-6X1/2TYPE-AB3
SCREW,TAPPING
NSN, MFG P/N
5305013174017
NSN
5305-01-317-4017
MFG
EUROPEAN INDUSTRIAL SERVICES LTD T/A NETTLEFOLDS
Description
FASTENER LENGTH: 0.500 INCHES NOMINAL
HEAD HEIGHT: 0.080 INCHES MINIMUM AND 0.093 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
INTERNAL DRIVE STYLE: D21 W/O INTERNAL DRIVE
MATERIAL: STEEL OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.138 INCHES
NONMACHINE THREAD STYLE: A13 GIMLET POINT (TYPE A, AB OR BA)
SURFACE TREATMENT: ZINC OVERALL
WIDTH BETWEEN FLATS: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
Related Searches:
S3S14266000-079
SCREW,TAPPING
NSN, MFG P/N
5305013174017
NSN
5305-01-317-4017
MFG
ROLLS-ROYCE AIRLINES
Description
FASTENER LENGTH: 0.500 INCHES NOMINAL
HEAD HEIGHT: 0.080 INCHES MINIMUM AND 0.093 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
INTERNAL DRIVE STYLE: D21 W/O INTERNAL DRIVE
MATERIAL: STEEL OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.138 INCHES
NONMACHINE THREAD STYLE: A13 GIMLET POINT (TYPE A, AB OR BA)
SURFACE TREATMENT: ZINC OVERALL
WIDTH BETWEEN FLATS: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
Related Searches:
S3S14266000-079
SCREW,TAPPING
NSN, MFG P/N
5305013174017
NSN
5305-01-317-4017
MFG
ROLLS - ROYCE PLC
Description
FASTENER LENGTH: 0.500 INCHES NOMINAL
HEAD HEIGHT: 0.080 INCHES MINIMUM AND 0.093 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
INTERNAL DRIVE STYLE: D21 W/O INTERNAL DRIVE
MATERIAL: STEEL OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.138 INCHES
NONMACHINE THREAD STYLE: A13 GIMLET POINT (TYPE A, AB OR BA)
SURFACE TREATMENT: ZINC OVERALL
WIDTH BETWEEN FLATS: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
Related Searches:
FF-S-85
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013174212
NSN
5305-01-317-4212
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
CRITICALITY CODE JUSTIFICATION: FEAT
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35307-303-DRILLED-HEAD
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HEAD HEIGHT: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MATERIAL: STEEL COMP 304 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-85
SPECIAL FEATURES: W/DRILLED-HEAD FOR LOCKING WIRE; CORROSION RESISTANT
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.369 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
Related Searches:
MS35307-1/4-20X1/2IN.
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013174212
NSN
5305-01-317-4212
MS35307-1/4-20X1/2IN.
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013174212
NSN
5305-01-317-4212
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
CRITICALITY CODE JUSTIFICATION: FEAT
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35307-303-DRILLED-HEAD
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HEAD HEIGHT: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MATERIAL: STEEL COMP 304 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-85
SPECIAL FEATURES: W/DRILLED-HEAD FOR LOCKING WIRE; CORROSION RESISTANT
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.369 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
Related Searches:
MS35307-303-DRILLED-HEAD
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013174212
NSN
5305-01-317-4212
MS35307-303-DRILLED-HEAD
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013174212
NSN
5305-01-317-4212
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
CRITICALITY CODE JUSTIFICATION: FEAT
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35307-303-DRILLED-HEAD
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HEAD HEIGHT: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MATERIAL: STEEL COMP 304 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-85
SPECIAL FEATURES: W/DRILLED-HEAD FOR LOCKING WIRE; CORROSION RESISTANT
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.369 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
Related Searches:
FF-S-85
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013174213
NSN
5305-01-317-4213
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
CRITICALITY CODE JUSTIFICATION: FEAT
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35307-306-DRILLED-HEAD
FASTENER LENGTH: 0.750 INCHES NOMINAL
HEAD HEIGHT: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MATERIAL: STEEL COMP 304 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-85
SPECIAL FEATURES: W/DRILLED-HEAD FOR LOCKING WIRE; CORROSION RESISTANT
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.428 INCHES MINIMUM AND 0.437 INCHES MAXIMUM
Related Searches:
MS35307-1/4-20X3/4IN.
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013174213
NSN
5305-01-317-4213
MS35307-1/4-20X3/4IN.
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013174213
NSN
5305-01-317-4213
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
CRITICALITY CODE JUSTIFICATION: FEAT
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35307-306-DRILLED-HEAD
FASTENER LENGTH: 0.750 INCHES NOMINAL
HEAD HEIGHT: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MATERIAL: STEEL COMP 304 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-85
SPECIAL FEATURES: W/DRILLED-HEAD FOR LOCKING WIRE; CORROSION RESISTANT
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.428 INCHES MINIMUM AND 0.437 INCHES MAXIMUM
Related Searches:
MS35307-306-DRILLED-HEAD
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013174213
NSN
5305-01-317-4213
MS35307-306-DRILLED-HEAD
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013174213
NSN
5305-01-317-4213
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
CRITICALITY CODE JUSTIFICATION: FEAT
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35307-306-DRILLED-HEAD
FASTENER LENGTH: 0.750 INCHES NOMINAL
HEAD HEIGHT: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MATERIAL: STEEL COMP 304 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-85
SPECIAL FEATURES: W/DRILLED-HEAD FOR LOCKING WIRE; CORROSION RESISTANT
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.428 INCHES MINIMUM AND 0.437 INCHES MAXIMUM
Related Searches:
509440-1430A
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305013174316
NSN
5305-01-317-4316
MFG
NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION CODE 4.8.8.0.0.B BLDG 148-2
Description
DESIGN CONTROL REFERENCE: 509440-1430A
HARDNESS RATING: 37.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 1.312 INCHES MAXIMUM
HEAD HEIGHT: 0.875 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
MANUFACTURERS CODE: 80020
MATERIAL: STEEL COMP 4140 OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
Related Searches:
509440-1636A
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305013174317
NSN
5305-01-317-4317
MFG
NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION CODE 4.8.8.0.0.B BLDG 148-2
Description
DESIGN CONTROL REFERENCE: 509440-1636A
HARDNESS RATING: 37.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 1.500 INCHES MAXIMUM
HEAD HEIGHT: 1.000 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
MANUFACTURERS CODE: 80020
MATERIAL: STEEL COMP 4140 OVERALL
NOMINAL THREAD DIAMETER: 1.000 INCHES
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 8
THREAD SERIES DESIGNATOR: UNC
Related Searches:
21C8504 PIECE 12
SCREW,MACHINE
NSN, MFG P/N
5305013175163
NSN
5305-01-317-5163
MFG
GENERAL ELECTRIC COMPANY DBA GE DIV GE - AVIATION
Description
SCREW,MACHINE
Related Searches:
21C8504P12
SCREW,MACHINE
NSN, MFG P/N
5305013175163
NSN
5305-01-317-5163
MFG
GENERAL ELECTRIC COMPANY DBA GE DIV GE - AVIATION
Description
SCREW,MACHINE
Related Searches:
FF-S-86
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305013175208
NSN
5305-01-317-5208
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
FASTENER LENGTH: 1.485 INCHES MINIMUM AND 1.531 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM FASTENER
HEAD DIAMETER: 0.303 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
HEAD HEIGHT: 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
LOCKING FEATURE: PATCH OR PELLET OR STRIP THREADS
MANUFACTURERS CODE: 81348
MATERIAL: PLASTIC POLYAMIDE LOCKING FEATURE STEEL FASTENER
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-86
NONDEFINITIVE SPEC/STD DATA: 6 TYPE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND CHROMATE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.875 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.1562 INCHES MINIMUM AND 0.1587 INCHES MAXIMUM
Related Searches:
MS21262-71
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305013175208
NSN
5305-01-317-5208
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 1.485 INCHES MINIMUM AND 1.531 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM FASTENER
HEAD DIAMETER: 0.303 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
HEAD HEIGHT: 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
LOCKING FEATURE: PATCH OR PELLET OR STRIP THREADS
MANUFACTURERS CODE: 81348
MATERIAL: PLASTIC POLYAMIDE LOCKING FEATURE STEEL FASTENER
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-86
NONDEFINITIVE SPEC/STD DATA: 6 TYPE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND CHROMATE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.875 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.1562 INCHES MINIMUM AND 0.1587 INCHES MAXIMUM
Related Searches:
MS21262-71
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305013175208
NSN
5305-01-317-5208
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
FASTENER LENGTH: 1.485 INCHES MINIMUM AND 1.531 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM FASTENER
HEAD DIAMETER: 0.303 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
HEAD HEIGHT: 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
LOCKING FEATURE: PATCH OR PELLET OR STRIP THREADS
MANUFACTURERS CODE: 81348
MATERIAL: PLASTIC POLYAMIDE LOCKING FEATURE STEEL FASTENER
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-86
NONDEFINITIVE SPEC/STD DATA: 6 TYPE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND CHROMATE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.875 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.1562 INCHES MINIMUM AND 0.1587 INCHES MAXIMUM