My Quote Request
5305-01-322-3546
20 Products
20409-003 FIND 36
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305013223546
NSN
5305-01-322-3546
20409-003 FIND 36
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305013223546
NSN
5305-01-322-3546
MFG
DOVER DIVERSIFIED DE INC.
Description
FASTENER LENGTH: 0.595 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HARDNESS RATING: 33.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
HOLE CONFIGURATION STYLE: E11 ROUND INTERNAL HEXAGON
HOLE DIAMETER: 0.044 INCHES MINIMUM AND 0.050 INCHES MAXIMUM
HOLE QUANTITY: 6
HOLE TYPE: DRILLED
III PRECIOUS MATERIAL: SILVER
III PRECIOUS MATERIAL AND LOCATION: OVERALL SILVER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 120000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1351 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: SILVER OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS2411 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.524 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNRF
WIDTH ACROSS FLATS: 0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
Related Searches:
NAS1351N4H10S
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305013223546
NSN
5305-01-322-3546
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.595 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HARDNESS RATING: 33.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
HOLE CONFIGURATION STYLE: E11 ROUND INTERNAL HEXAGON
HOLE DIAMETER: 0.044 INCHES MINIMUM AND 0.050 INCHES MAXIMUM
HOLE QUANTITY: 6
HOLE TYPE: DRILLED
III PRECIOUS MATERIAL: SILVER
III PRECIOUS MATERIAL AND LOCATION: OVERALL SILVER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 120000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1351 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: SILVER OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS2411 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.524 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNRF
WIDTH ACROSS FLATS: 0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
Related Searches:
49956
SCREW,SHOULDER
NSN, MFG P/N
5305013223547
NSN
5305-01-322-3547
MFG
R A F ELECTRONIC HARDWARE INC
Description
FASTENER LENGTH: 0.745 INCHES MINIMUM AND 0.757 INCHES MAXIMUM
HEAD DIAMETER: 0.308 INCHES MINIMUM AND 0.316 INCHES MAXIMUM
HEAD HEIGHT: 0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL CORROSION RESISTING OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A581 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.164 INCHES
SHOULDER DIAMETER: 0.186 INCHES MINIMUM AND 0.187 INCHES MAXIMUM FIRST SHOULDER
SHOULDER LENGTH: 0.563 INCHES MINIMUM AND 0.565 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPE: ROUND FIRST SHOULDER
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM A380 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.182 INCHES MINIMUM AND 0.192 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
7026-SS-20
SCREW,SHOULDER
NSN, MFG P/N
5305013223547
NSN
5305-01-322-3547
MFG
R A F ELECTRONIC HARDWARE INC
Description
FASTENER LENGTH: 0.745 INCHES MINIMUM AND 0.757 INCHES MAXIMUM
HEAD DIAMETER: 0.308 INCHES MINIMUM AND 0.316 INCHES MAXIMUM
HEAD HEIGHT: 0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL CORROSION RESISTING OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A581 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.164 INCHES
SHOULDER DIAMETER: 0.186 INCHES MINIMUM AND 0.187 INCHES MAXIMUM FIRST SHOULDER
SHOULDER LENGTH: 0.563 INCHES MINIMUM AND 0.565 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPE: ROUND FIRST SHOULDER
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM A380 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.182 INCHES MINIMUM AND 0.192 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
G225097-6
SCREW,SHOULDER
NSN, MFG P/N
5305013223547
NSN
5305-01-322-3547
MFG
RAYTHEON COMPANY DBA RAYTHEON
Description
FASTENER LENGTH: 0.745 INCHES MINIMUM AND 0.757 INCHES MAXIMUM
HEAD DIAMETER: 0.308 INCHES MINIMUM AND 0.316 INCHES MAXIMUM
HEAD HEIGHT: 0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL CORROSION RESISTING OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A581 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.164 INCHES
SHOULDER DIAMETER: 0.186 INCHES MINIMUM AND 0.187 INCHES MAXIMUM FIRST SHOULDER
SHOULDER LENGTH: 0.563 INCHES MINIMUM AND 0.565 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPE: ROUND FIRST SHOULDER
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM A380 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.182 INCHES MINIMUM AND 0.192 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
G225097-6
SCREW,SHOULDER
NSN, MFG P/N
5305013223547
NSN
5305-01-322-3547
MFG
GLOBE ELECTRONIC HARDWARE INC
Description
FASTENER LENGTH: 0.745 INCHES MINIMUM AND 0.757 INCHES MAXIMUM
HEAD DIAMETER: 0.308 INCHES MINIMUM AND 0.316 INCHES MAXIMUM
HEAD HEIGHT: 0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL CORROSION RESISTING OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A581 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.164 INCHES
SHOULDER DIAMETER: 0.186 INCHES MINIMUM AND 0.187 INCHES MAXIMUM FIRST SHOULDER
SHOULDER LENGTH: 0.563 INCHES MINIMUM AND 0.565 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPE: ROUND FIRST SHOULDER
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM A380 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.182 INCHES MINIMUM AND 0.192 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
G225097-6
SCREW,SHOULDER
NSN, MFG P/N
5305013223547
NSN
5305-01-322-3547
MFG
RAYTHEON TECHNICAL SERVICES COMPANY LLC DBA RAYTHEON
Description
FASTENER LENGTH: 0.745 INCHES MINIMUM AND 0.757 INCHES MAXIMUM
HEAD DIAMETER: 0.308 INCHES MINIMUM AND 0.316 INCHES MAXIMUM
HEAD HEIGHT: 0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL CORROSION RESISTING OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A581 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.164 INCHES
SHOULDER DIAMETER: 0.186 INCHES MINIMUM AND 0.187 INCHES MAXIMUM FIRST SHOULDER
SHOULDER LENGTH: 0.563 INCHES MINIMUM AND 0.565 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPE: ROUND FIRST SHOULDER
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM A380 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.182 INCHES MINIMUM AND 0.192 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
SS-8525-12
SCREW,SHOULDER
NSN, MFG P/N
5305013223547
NSN
5305-01-322-3547
MFG
CINCINNATI RESEARCH CO
Description
FASTENER LENGTH: 0.745 INCHES MINIMUM AND 0.757 INCHES MAXIMUM
HEAD DIAMETER: 0.308 INCHES MINIMUM AND 0.316 INCHES MAXIMUM
HEAD HEIGHT: 0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL CORROSION RESISTING OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A581 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.164 INCHES
SHOULDER DIAMETER: 0.186 INCHES MINIMUM AND 0.187 INCHES MAXIMUM FIRST SHOULDER
SHOULDER LENGTH: 0.563 INCHES MINIMUM AND 0.565 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPE: ROUND FIRST SHOULDER
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM A380 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.182 INCHES MINIMUM AND 0.192 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
NAS1123-31
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013223548
NSN
5305-01-322-3548
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 2.199 INCHES MINIMUM AND 2.229 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 1.928 INCHES MINIMUM AND 1.948 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.306 INCHES MINIMUM AND 0.313 INCHES MAXIMUM
HEAD HEIGHT: 0.103 INCHES MINIMUM AND 0.118 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1123 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.276 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
NAS1124-14
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013223549
NSN
5305-01-322-3549
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 1.176 INCHES MINIMUM AND 1.206 INCHES MAXIMUM
GRIP DIAMETER: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.133 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1124 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.316 INCHES NOMINAL
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
NAS1125V12
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013223550
NSN
5305-01-322-3550
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 1.110 INCHES MINIMUM AND 1.140 INCHES MAXIMUM
GRIP DIAMETER: 0.3106 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
HEAD DIAMETER: 0.429 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
HEAD HEIGHT: 0.162 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: TITANIUM ALLOY UNS R56400 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1125 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.375 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
G383-6-10
SCREW,MACHINE
NSN, MFG P/N
5305013223601
NSN
5305-01-322-3601
MFG
NORTHROP GRUMMAN SYSTEMS CORPORATION DIV NORTHROP GRUMMAN AEROSPACE SYSTEMS
Description
COUNTERSINK ANGLE: 82.0 DEGREES NOMINAL
FASTENER LENGTH: 0.562 INCHES NOMINAL
HEAD DIAMETER: 0.268 INCHES NOMINAL
HEAD STYLE: A42 OVAL COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: STEEL
SCREW SURFACE TREATMENT: NICKEL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.487 INCHES MINIMUM AND 0.549 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
NAS8403-14
SCREW,MACHINE
NSN, MFG P/N
5305013223602
NSN
5305-01-322-3602
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
EXTENDED WASHER DIAMETER: 0.413 INCHES MINIMUM AND 0.443 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.030 INCHES MINIMUM AND 0.037 INCHES MAXIMUM
FASTENER LENGTH: 0.850 INCHES MINIMUM AND 0.880 INCHES MAXIMUM
HEAD DIAMETER: 0.343 INCHES MINIMUM AND 0.363 INCHES MAXIMUM
HEAD HEIGHT: 0.085 INCHES MINIMUM AND 0.105 INCHES MAXIMUM
HEAD STYLE: A29 ROUND EXTENDED WASHER
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: IRON ALLOY 660
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS5737 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE
SPECIFICATION/STANDARD DATA: 80205-NAS8403 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.788 INCHES MINIMUM AND 0.880 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
NAS8403-7
SCREW,MACHINE
NSN, MFG P/N
5305013223603
NSN
5305-01-322-3603
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
EXTENDED WASHER DIAMETER: 0.413 INCHES MINIMUM AND 0.443 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.030 INCHES MINIMUM AND 0.037 INCHES MAXIMUM
FASTENER LENGTH: 0.410 INCHES MINIMUM AND 0.440 INCHES MAXIMUM
HEAD DIAMETER: 0.343 INCHES MINIMUM AND 0.363 INCHES MAXIMUM
HEAD HEIGHT: 0.086 INCHES MINIMUM AND 0.106 INCHES MAXIMUM
HEAD STYLE: A29 ROUND EXTENDED WASHER
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: IRON ALLOY 660
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE
SPECIFICATION/STANDARD DATA: 80205-NAS8403 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.348 INCHES MINIMUM AND 0.440 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
3176207-A-168
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305013223968
NSN
5305-01-322-3968
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
DESIGN CONTROL REFERENCE: 3176207-A-168
FASTENER LENGTH: 3.250 INCHES NOMINAL
HEAD STYLE: C26 DEE CHAMFER
III END ITEM IDENTIFICATION: MK26 MOD0 GMLS
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 10001
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.375 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 16
THREAD SERIES DESIGNATOR: UNC
Related Searches:
M6X30 DIN 6912
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305013224348
NSN
5305-01-322-4348
MFG
SCOTTISH IMPORTS LTD
Description
SCREW,CAP,SOCKET HEAD
Related Searches:
20428-002 FIND 116
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305013224710
NSN
5305-01-322-4710
20428-002 FIND 116
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305013224710
NSN
5305-01-322-4710
MFG
DOVER DIVERSIFIED DE INC.
Description
FASTENER LENGTH: 2.172 INCHES MINIMUM AND 2.312 INCHES MAXIMUM
HARDNESS RATING: 39.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 1.293 INCHES MINIMUM AND 1.312 INCHES MAXIMUM
HEAD HEIGHT: 0.864 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
III PRECIOUS MATERIAL: SILVER
III PRECIOUS MATERIAL AND LOCATION: OVERALL SILVER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.875 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1351 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: SILVER OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS 2411 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 2.029 INCHES MINIMUM
THREAD QUANTITY PER INCH: 14
THREAD SERIES DESIGNATOR: UNRF
WIDTH ACROSS FLATS: 0.750 INCHES MINIMUM AND 0.757 INCHES MAXIMUM
Related Searches:
NAS1351N14-38S
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305013224710
NSN
5305-01-322-4710
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 2.172 INCHES MINIMUM AND 2.312 INCHES MAXIMUM
HARDNESS RATING: 39.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 1.293 INCHES MINIMUM AND 1.312 INCHES MAXIMUM
HEAD HEIGHT: 0.864 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
III PRECIOUS MATERIAL: SILVER
III PRECIOUS MATERIAL AND LOCATION: OVERALL SILVER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.875 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1351 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: SILVER OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS 2411 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 2.029 INCHES MINIMUM
THREAD QUANTITY PER INCH: 14
THREAD SERIES DESIGNATOR: UNRF
WIDTH ACROSS FLATS: 0.750 INCHES MINIMUM AND 0.757 INCHES MAXIMUM
Related Searches:
NAS1351-04-6
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305013224711
NSN
5305-01-322-4711
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HARDNESS RATING: 39.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.176 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD HEIGHT: 0.108 INCHES MINIMUM AND 0.112 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A574 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 180000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 155000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1351 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.303 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 48
THREAD SERIES DESIGNATOR: UNRF
WIDTH ACROSS FLATS: 0.093 INCHES MINIMUM AND 0.095 INCHES MAXIMUM
Related Searches:
213039-8
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305013224712
NSN
5305-01-322-4712
MFG
BOSCH REXROTH GMBH LOHMANN STOLTER OHT
Description
FASTENER LENGTH: 0.470 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.303 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
HEAD HEIGHT: 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 OR STEEL COMP XM-7 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A493 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1352 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY1 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.387 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNRC
WIDTH ACROSS FLATS: 0.156 INCHES MINIMUM AND 0.159 INCHES MAXIMUM