My Quote Request
5305-01-332-8215
20 Products
101030P62-16
SCREW,MACHINE
NSN, MFG P/N
5305013328215
NSN
5305-01-332-8215
MFG
B.C. SYSTEMS INC.
Description
SCREW,MACHINE
Related Searches:
101030P62-16
SCREW,MACHINE
NSN, MFG P/N
5305013328215
NSN
5305-01-332-8215
MFG
TEMPO INSTRUMENT INC DEFENSE ELECTRONICS DIV
Description
SCREW,MACHINE
Related Searches:
4177085-255
SCREW,MACHINE
NSN, MFG P/N
5305013328218
NSN
5305-01-332-8218
MFG
RAYTHEON COMPANY DBA RAYTHEON
Description
SCREW,MACHINE
Related Searches:
MS24693C301
SCREW,MACHINE
NSN, MFG P/N
5305013328218
NSN
5305-01-332-8218
MFG
BOSCH REXROTH GMBH LOHMANN STOLTER OHT
Description
SCREW,MACHINE
Related Searches:
MS24678-4
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305013328347
NSN
5305-01-332-8347
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.622 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
HEAD HEIGHT: 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
HOLE CONFIGURATION STYLE: E9 ROUND
HOLE DIAMETER: 0.033 INCHES MINIMUM AND 0.039 INCHES MAXIMUM
HOLE QUANTITY: 1
HOLE TYPE: DRILLED
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL OVERALL
MINIMUM TENSILE STRENGTH: 180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.575 INCHES NOMINAL
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.1094 INCHES MINIMUM AND 0.1111 INCHES MAXIMUM
Related Searches:
MS24678-4
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305013328347
NSN
5305-01-332-8347
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
FASTENER LENGTH: 0.622 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
HEAD HEIGHT: 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
HOLE CONFIGURATION STYLE: E9 ROUND
HOLE DIAMETER: 0.033 INCHES MINIMUM AND 0.039 INCHES MAXIMUM
HOLE QUANTITY: 1
HOLE TYPE: DRILLED
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL OVERALL
MINIMUM TENSILE STRENGTH: 180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.575 INCHES NOMINAL
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.1094 INCHES MINIMUM AND 0.1111 INCHES MAXIMUM
Related Searches:
MS51576-11
SCREW,SHOULDER
NSN, MFG P/N
5305013328348
NSN
5305-01-332-8348
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.2063 INCHES MINIMUM AND 0.2690 INCHES MAXIMUM
HEAD DIAMETER: 0.2813 INCHES MINIMUM AND 0.3437 INCHES MAXIMUM
HEAD HEIGHT: 0.1250 INCHES MINIMUM AND 0.1874 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 COND. A ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.164 INCHES
SHOULDER DIAMETER: 0.1860 INCHES MINIMUM AND 0.1870 INCHES MAXIMUM FIRST SHOULDER
SHOULDER LENGTH: 0.500 INCHES MINIMUM AND 0.503 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPE: ROUND FIRST SHOULDER
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.1563 INCHES MINIMUM AND 0.2187 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.0940 INCHES NOMINAL
Related Searches:
MS51576-11
SCREW,SHOULDER
NSN, MFG P/N
5305013328348
NSN
5305-01-332-8348
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
FASTENER LENGTH: 0.2063 INCHES MINIMUM AND 0.2690 INCHES MAXIMUM
HEAD DIAMETER: 0.2813 INCHES MINIMUM AND 0.3437 INCHES MAXIMUM
HEAD HEIGHT: 0.1250 INCHES MINIMUM AND 0.1874 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 COND. A ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.164 INCHES
SHOULDER DIAMETER: 0.1860 INCHES MINIMUM AND 0.1870 INCHES MAXIMUM FIRST SHOULDER
SHOULDER LENGTH: 0.500 INCHES MINIMUM AND 0.503 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPE: ROUND FIRST SHOULDER
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.1563 INCHES MINIMUM AND 0.2187 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.0940 INCHES NOMINAL
Related Searches:
NAS1580A4T10D
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013328355
NSN
5305-01-332-8355
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 0.887 INCHES MINIMUM AND 0.937 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.013 INCHES MINIMUM AND 1.043 INCHES MAXIMUM
GRIP DIAMETER: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD DIAMETER: 0.464 INCHES MINIMUM AND 0.507 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SPECIFICATION/STANDARD DATA: 80205-NAS1580 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.403 INCHES NOMINAL
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
NAS1581A4R13
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013328356
NSN
5305-01-332-8356
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.200 INCHES MINIMUM AND 1.230 INCHES MAXIMUM
GRIP DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.3988 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D25 TORQUE-SET RIBBED
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150 OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1581 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.403 INCHES NOMINAL
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
NAS1581F4R13
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013328356
NSN
5305-01-332-8356
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.200 INCHES MINIMUM AND 1.230 INCHES MAXIMUM
GRIP DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.3988 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D25 TORQUE-SET RIBBED
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150 OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1581 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.403 INCHES NOMINAL
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
868197-0086
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305013328357
NSN
5305-01-332-8357
MFG
LITTON SYSTEMS INC. DIV NAVIGATION SYSTEMS DIVISION
Description
FASTENER LENGTH: 0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM
HEAD DIAMETER: 0.375 INCHES MINIMUM AND 0.395 INCHES MAXIMUM
HEAD HEIGHT: 0.115 INCHES NOMINAL
HEAD STYLE: C67 KNURLED NO. 2
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 301 SECONDARY WASHER STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 PRIMARY WASHER STEEL COMP 302 SPRING STEEL COMP 304 STAND-OFF STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR
MATERIAL ACCOMMODATED THICKNESS: 0.064 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE SECONDARY WASHER ASTM A580 ASSN STD SINGLE MATERIAL RESPONSE SPRING MIL-S-23195 MIL SPEC SINGLE MATERIAL RESPONSE STAND-OFF
NOMINAL THREAD DIAMETER: 0.164 INCHES
SURFACE TREATMENT: OXIDE SECONDARY WASHER OXIDE PRIMARY WASHER PASSIVATE SPRING OXIDE STAND-OFF OXIDE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE SECONDARY WASHER MIL-C-13924 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING MIL-C-13924 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
~1: MIL-C-13924 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE FASTENER
~1: STEEL COMP 384 FASTENER
Related Searches:
868197-0086
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305013328357
NSN
5305-01-332-8357
MFG
NORTHROP GRUMMAN GUIDANCE AND ELECTRONICS COMPANY INC. DBA NAVIGATION SYSTEMS DIVISION DIV NAVIGATION SYSTEMS DIVISION
Description
FASTENER LENGTH: 0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM
HEAD DIAMETER: 0.375 INCHES MINIMUM AND 0.395 INCHES MAXIMUM
HEAD HEIGHT: 0.115 INCHES NOMINAL
HEAD STYLE: C67 KNURLED NO. 2
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 301 SECONDARY WASHER STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 PRIMARY WASHER STEEL COMP 302 SPRING STEEL COMP 304 STAND-OFF STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR
MATERIAL ACCOMMODATED THICKNESS: 0.064 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE SECONDARY WASHER ASTM A580 ASSN STD SINGLE MATERIAL RESPONSE SPRING MIL-S-23195 MIL SPEC SINGLE MATERIAL RESPONSE STAND-OFF
NOMINAL THREAD DIAMETER: 0.164 INCHES
SURFACE TREATMENT: OXIDE SECONDARY WASHER OXIDE PRIMARY WASHER PASSIVATE SPRING OXIDE STAND-OFF OXIDE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE SECONDARY WASHER MIL-C-13924 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING MIL-C-13924 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
~1: MIL-C-13924 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE FASTENER
~1: STEEL COMP 384 FASTENER
Related Searches:
868197-86
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305013328357
NSN
5305-01-332-8357
MFG
LITTON SYSTEMS INC. DIV NAVIGATION SYSTEMS DIVISION
Description
FASTENER LENGTH: 0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM
HEAD DIAMETER: 0.375 INCHES MINIMUM AND 0.395 INCHES MAXIMUM
HEAD HEIGHT: 0.115 INCHES NOMINAL
HEAD STYLE: C67 KNURLED NO. 2
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 301 SECONDARY WASHER STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 PRIMARY WASHER STEEL COMP 302 SPRING STEEL COMP 304 STAND-OFF STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR
MATERIAL ACCOMMODATED THICKNESS: 0.064 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE SECONDARY WASHER ASTM A580 ASSN STD SINGLE MATERIAL RESPONSE SPRING MIL-S-23195 MIL SPEC SINGLE MATERIAL RESPONSE STAND-OFF
NOMINAL THREAD DIAMETER: 0.164 INCHES
SURFACE TREATMENT: OXIDE SECONDARY WASHER OXIDE PRIMARY WASHER PASSIVATE SPRING OXIDE STAND-OFF OXIDE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE SECONDARY WASHER MIL-C-13924 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING MIL-C-13924 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
~1: MIL-C-13924 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE FASTENER
~1: STEEL COMP 384 FASTENER
Related Searches:
868197-86
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305013328357
NSN
5305-01-332-8357
MFG
NORTHROP GRUMMAN GUIDANCE AND ELECTRONICS COMPANY INC. DBA NAVIGATION SYSTEMS DIVISION DIV NAVIGATION SYSTEMS DIVISION
Description
FASTENER LENGTH: 0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM
HEAD DIAMETER: 0.375 INCHES MINIMUM AND 0.395 INCHES MAXIMUM
HEAD HEIGHT: 0.115 INCHES NOMINAL
HEAD STYLE: C67 KNURLED NO. 2
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 301 SECONDARY WASHER STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 PRIMARY WASHER STEEL COMP 302 SPRING STEEL COMP 304 STAND-OFF STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR
MATERIAL ACCOMMODATED THICKNESS: 0.064 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE SECONDARY WASHER ASTM A580 ASSN STD SINGLE MATERIAL RESPONSE SPRING MIL-S-23195 MIL SPEC SINGLE MATERIAL RESPONSE STAND-OFF
NOMINAL THREAD DIAMETER: 0.164 INCHES
SURFACE TREATMENT: OXIDE SECONDARY WASHER OXIDE PRIMARY WASHER PASSIVATE SPRING OXIDE STAND-OFF OXIDE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE SECONDARY WASHER MIL-C-13924 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING MIL-C-13924 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
~1: MIL-C-13924 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE FASTENER
~1: STEEL COMP 384 FASTENER
Related Searches:
FSC7900-8-C-5
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305013328357
NSN
5305-01-332-8357
MFG
HUCK INTL INC
Description
FASTENER LENGTH: 0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM
HEAD DIAMETER: 0.375 INCHES MINIMUM AND 0.395 INCHES MAXIMUM
HEAD HEIGHT: 0.115 INCHES NOMINAL
HEAD STYLE: C67 KNURLED NO. 2
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 301 SECONDARY WASHER STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 PRIMARY WASHER STEEL COMP 302 SPRING STEEL COMP 304 STAND-OFF STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR
MATERIAL ACCOMMODATED THICKNESS: 0.064 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE SECONDARY WASHER ASTM A580 ASSN STD SINGLE MATERIAL RESPONSE SPRING MIL-S-23195 MIL SPEC SINGLE MATERIAL RESPONSE STAND-OFF
NOMINAL THREAD DIAMETER: 0.164 INCHES
SURFACE TREATMENT: OXIDE SECONDARY WASHER OXIDE PRIMARY WASHER PASSIVATE SPRING OXIDE STAND-OFF OXIDE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE SECONDARY WASHER MIL-C-13924 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING MIL-C-13924 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
~1: MIL-C-13924 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE FASTENER
~1: STEEL COMP 384 FASTENER
Related Searches:
FT1056-86A
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305013328357
NSN
5305-01-332-8357
MFG
FASTENER TECHNOLOGY CORP
Description
FASTENER LENGTH: 0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM
HEAD DIAMETER: 0.375 INCHES MINIMUM AND 0.395 INCHES MAXIMUM
HEAD HEIGHT: 0.115 INCHES NOMINAL
HEAD STYLE: C67 KNURLED NO. 2
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 301 SECONDARY WASHER STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 PRIMARY WASHER STEEL COMP 302 SPRING STEEL COMP 304 STAND-OFF STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR
MATERIAL ACCOMMODATED THICKNESS: 0.064 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE SECONDARY WASHER ASTM A580 ASSN STD SINGLE MATERIAL RESPONSE SPRING MIL-S-23195 MIL SPEC SINGLE MATERIAL RESPONSE STAND-OFF
NOMINAL THREAD DIAMETER: 0.164 INCHES
SURFACE TREATMENT: OXIDE SECONDARY WASHER OXIDE PRIMARY WASHER PASSIVATE SPRING OXIDE STAND-OFF OXIDE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE SECONDARY WASHER MIL-C-13924 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING MIL-C-13924 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
~1: MIL-C-13924 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE FASTENER
~1: STEEL COMP 384 FASTENER
Related Searches:
NAS1101E04H5
SCREW,MACHINE
NSN, MFG P/N
5305013328609
NSN
5305-01-332-8609
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
BEARING SURFACE OF HEAD SURFACE FINISH: 32.0 MICROINCHES
FASTENER LENGTH: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
HEAD DIAMETER: 0.178 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD HEIGHT: 0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM
HEAD HOLE CONFIGURATION STYLE: C8 ROUND
HEAD STYLE: A33 FILLISTER
HOLE DIAMETER: 0.034 INCHES MINIMUM AND 0.042 INCHES MAXIMUM
HOLE QUANTITY: 1
INTERNAL DRIVE STYLE: B5 TORQUE SET
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: IRON ALLOY 660
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS5737 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPECIFICATION/STANDARD DATA: 80205-NAS1101 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.231 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNJC
THREAD SURFACE FINISH: 32.0 MICROINCHES
Related Searches:
BACS12CB3-9
SCREW,MACHINE
NSN, MFG P/N
5305013328610
NSN
5305-01-332-8610
MFG
THE BOEING COMPANY DBA BOEING DIV BOEING COMMERCIAL AIRPLANES
Description
FASTENER LENGTH: 0.528 INCHES MINIMUM AND 0.558 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
HEAD HEIGHT: 0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM
HEAD STYLE: A3 DISHED HEXAGON
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL COMP 4037 OR STEEL COMP 8630
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS6300 ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.466 INCHES MINIMUM AND 0.558 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.305 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
Related Searches:
BACS12CB3-9
SCREW,MACHINE
NSN, MFG P/N
5305013328610
NSN
5305-01-332-8610
MFG
THE BOEING COMPANY DBA BOEING
Description
FASTENER LENGTH: 0.528 INCHES MINIMUM AND 0.558 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
HEAD HEIGHT: 0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM
HEAD STYLE: A3 DISHED HEXAGON
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL COMP 4037 OR STEEL COMP 8630
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS6300 ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.466 INCHES MINIMUM AND 0.558 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.305 INCHES MINIMUM AND 0.312 INCHES MAXIMUM