My Quote Request
5305-01-340-9361
20 Products
FF-S-92
SCREW,MACHINE
NSN, MFG P/N
5305013409361
NSN
5305-01-340-9361
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS51960-42
FASTENER LENGTH: 0.160 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
HEAD DIAMETER: 0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-92
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 2C STYLE
SCREW MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.034 INCHES MINIMUM AND 0.090 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 36
THREAD SERIES DESIGNATOR: UNF
~1: OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385
Related Searches:
MS51960-42
SCREW,MACHINE
NSN, MFG P/N
5305013409361
NSN
5305-01-340-9361
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS51960-42
FASTENER LENGTH: 0.160 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
HEAD DIAMETER: 0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-92
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 2C STYLE
SCREW MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.034 INCHES MINIMUM AND 0.090 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 36
THREAD SERIES DESIGNATOR: UNF
~1: OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385
Related Searches:
0.125-40NCX0.250LG
SCREW,MACHINE
NSN, MFG P/N
5305013409778
NSN
5305-01-340-9778
MFG
PRODUCT COMPONENTS CORPORATION
Description
SCREW,MACHINE
Related Searches:
DIN 912 ST M4X10
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305013409849
NSN
5305-01-340-9849
DIN 912 ST M4X10
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305013409849
NSN
5305-01-340-9849
MFG
METRIC AND MULTISTANDARD COMPONENTS CORP
Description
EXTERNAL THREAD TOLERANCE CLASS: 6G
FASTENER LENGTH: 10.0 MILLIMETERS NOMINAL
HEAD DIAMETER: 7.0 MILLIMETERS NOMINAL
HEAD HEIGHT: 4.0 MILLIMETERS NOMINAL
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 304 OR STEEL COMP 316 OVERALL
NOMINAL THREAD DIAMETER: 4.0 MILLIMETERS
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 8.60 MILLIMETERS MINIMUM AND 10.00 MILLIMETERS MAXIMUM
THREAD PITCH IN MILLIMETERS: 0.7
THREAD SERIES DESIGNATOR: M
WIDTH ACROSS FLATS: 3.0 MILLIMETERS NOMINAL
Related Searches:
DIN912M4X10ST
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305013409849
NSN
5305-01-340-9849
MFG
METRIC AND MULTISTANDARD COMPONENTS CORP
Description
EXTERNAL THREAD TOLERANCE CLASS: 6G
FASTENER LENGTH: 10.0 MILLIMETERS NOMINAL
HEAD DIAMETER: 7.0 MILLIMETERS NOMINAL
HEAD HEIGHT: 4.0 MILLIMETERS NOMINAL
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 304 OR STEEL COMP 316 OVERALL
NOMINAL THREAD DIAMETER: 4.0 MILLIMETERS
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 8.60 MILLIMETERS MINIMUM AND 10.00 MILLIMETERS MAXIMUM
THREAD PITCH IN MILLIMETERS: 0.7
THREAD SERIES DESIGNATOR: M
WIDTH ACROSS FLATS: 3.0 MILLIMETERS NOMINAL
Related Searches:
Y9-M4-A10
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305013409849
NSN
5305-01-340-9849
MFG
W. M. BERG INC
Description
EXTERNAL THREAD TOLERANCE CLASS: 6G
FASTENER LENGTH: 10.0 MILLIMETERS NOMINAL
HEAD DIAMETER: 7.0 MILLIMETERS NOMINAL
HEAD HEIGHT: 4.0 MILLIMETERS NOMINAL
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 304 OR STEEL COMP 316 OVERALL
NOMINAL THREAD DIAMETER: 4.0 MILLIMETERS
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 8.60 MILLIMETERS MINIMUM AND 10.00 MILLIMETERS MAXIMUM
THREAD PITCH IN MILLIMETERS: 0.7
THREAD SERIES DESIGNATOR: M
WIDTH ACROSS FLATS: 3.0 MILLIMETERS NOMINAL
Related Searches:
NAS1352N02-3B
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305013409851
NSN
5305-01-340-9851
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COLOR: BLACK OVERALL
FASTENER LENGTH: 0.158 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
HARDNESS RATING: 33.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.134 INCHES MINIMUM AND 0.140 INCHES MAXIMUM
HEAD HEIGHT: 0.083 INCHES MINIMUM AND 0.086 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 120000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.086 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1352 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: OXIDE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924,CL3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.122 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNRC
WIDTH ACROSS FLATS: 0.078 INCHES MINIMUM AND 0.079 INCHES MAXIMUM
Related Searches:
NAS1352N04-8B
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305013409852
NSN
5305-01-340-9852
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COLOR: BLACK OVERALL
FASTENER LENGTH: 0.470 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HARDNESS RATING: 33.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.176 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD HEIGHT: 0.108 INCHES MINIMUM AND 0.112 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 120000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1352 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: OXIDE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924,CL3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.420 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNRC
WIDTH ACROSS FLATS: 0.093 INCHES MINIMUM AND 0.095 INCHES MAXIMUM
Related Searches:
1721730
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013409853
NSN
5305-01-340-9853
MFG
OSHKOSH CORPORATION
Description
SCREW,CAP,HEXAGON HEAD
Related Searches:
6-73-412
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013409853
NSN
5305-01-340-9853
MFG
DANA CORP SPICER UNIVERSAL JOINT DIV
Description
SCREW,CAP,HEXAGON HEAD
Related Searches:
6-73-412
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013409853
NSN
5305-01-340-9853
MFG
DANA CORP SPICER UNIVERSAL JOINT DIV LIMA PLANT
Description
SCREW,CAP,HEXAGON HEAD
Related Searches:
CSC6-24-56
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013409853
NSN
5305-01-340-9853
MFG
MERITOR HEAVY VEHICLE SYSTEMS LLC
Description
SCREW,CAP,HEXAGON HEAD
Related Searches:
815-0693
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013409855
NSN
5305-01-340-9855
MFG
ONAN CORPORATION DBA CUMMINS POWER GENERATION
Description
SCREW,CAP,HEXAGON HEAD
Related Searches:
23-10891-704
SCREW,SELF-DRILLING
NSN, MFG P/N
5305013409857
NSN
5305-01-340-9857
MFG
DAIMLER TRUCKS NORTH AMERICA LLC
Description
FASTENER LENGTH: 7.040 INCHES NOMINAL
HEAD DIAMETER: 0.206 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD HEIGHT: 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.164 INCHES
POINT STYLE: F36 SELF-DRILLING
SURFACE TREATMENT: CADMIUM OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
NAS5902-16
SCREW,MACHINE
NSN, MFG P/N
5305013410378
NSN
5305-01-341-0378
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 1.000 INCHES NOMINAL
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
HEAD HEIGHT: 0.096 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
HEAD STYLE: A1 HEXAGON
INTERNAL DRIVE STYLE: B14 TRI-WING RECESS
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
SCREW MATERIAL: STEEL COMP 4340 OR STEEL COMP 8740
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE
SPECIFICATION/STANDARD DATA: 80205-NAS5902 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.938 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
WIDTH BETWEEN FLATS: 0.243 INCHES MINIMUM AND 0.251 INCHES MAXIMUM
Related Searches:
43499
SETSCREW
NSN, MFG P/N
5305013410714
NSN
5305-01-341-0714
MFG
GOODRICH CORPORATION DBA GOODRICH PUMP ENG CTRL SYSTEMS DIV GOODRICH PUMP& ENGINE CONTROL SYSTEMS INC.
Description
SETSCREW
Related Searches:
955168-1
SETSCREW
NSN, MFG P/N
5305013410715
NSN
5305-01-341-0715
MFG
HONEYWELL INTERNATIONAL INC DBA HONEYWELL DIV AEROSPACE - TORRANCE
Description
FASTENER LENGTH: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 4037 OR STEEL COMP 4140 OR STEEL COMP 8630 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
POINT DIAMETER: 0.165 INCHES MINIMUM AND 0.175 INCHES MAXIMUM
POINT LENGTH: 0.170 INCHES MINIMUM AND 0.200 INCHES MAXIMUM
POINT STYLE: F4 DOG
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-8837 TY2 CL3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.290 INCHES MINIMUM AND 0.340 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.125 INCHES MINIMUM AND 0.127 INCHES MAXIMUM
Related Searches:
955164-1
SETSCREW
NSN, MFG P/N
5305013410716
NSN
5305-01-341-0716
MFG
HONEYWELL INTERNATIONAL INC DBA HONEYWELL DIV AEROSPACE - TORRANCE
Description
FASTENER LENGTH: 2.110 INCHES MINIMUM AND 2.140 INCHES MAXIMUM
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 4037 OR STEEL COMP 4140 OR STEEL COMP 8630 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER: 0.500 INCHES
POINT DIAMETER: 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
POINT LENGTH: 1.480 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
POINT STYLE: F11 BALL
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-8837 TY2 CL3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.610 INCHES MINIMUM AND 0.660 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.250 INCHES MINIMUM AND 0.252 INCHES MAXIMUM
Related Searches:
6419990-1
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013410717
NSN
5305-01-341-0717
MFG
HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER TEST SYSTEMS DIV
Description
FASTENER LENGTH: 1.000 INCHES NOMINAL
HEAD HEIGHT: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.380 INCHES NOMINAL
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.428 INCHES MINIMUM AND 0.437 INCHES MAXIMUM
Related Searches:
3050178-1
SCREW,MACHINE
NSN, MFG P/N
5305013411039
NSN
5305-01-341-1039
MFG
RAYTHEON COMPANY
Description
SCREW,MACHINE