My Quote Request
5305-01-342-2001
20 Products
0.250-20UNC-2A X 1.250 LG STL
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013422001
NSN
5305-01-342-2001
0.250-20UNC-2A X 1.250 LG STL
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013422001
NSN
5305-01-342-2001
MFG
AMERICAN NATIONAL STANDARDS INSTITUTE DBA A N S I
Description
FASTENER LENGTH: 1.250 INCHES NOMINAL
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD HEIGHT: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81349
MATERIAL: NICKEL ALLOY K-500 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A193 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 130000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MIL-DTL-1222
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.750 INCHES NOMINAL
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
Related Searches:
90276A158
SCREW,MACHINE
NSN, MFG P/N
5305013421464
NSN
5305-01-342-1464
Description
HEAD DIAMETER: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD HEIGHT: 0.091 INCHES MINIMUM AND 0.103 INCHES MAXIMUM
HEAD STYLE: A22 OVAL
INTERNAL DRIVE STYLE: B7 TORQUE
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL
SPECIFICATION/STANDARD DATA: 90166-872776 PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.563 INCHES MINIMUM AND 1.625 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
0077727
SCREW,MACHINE
NSN, MFG P/N
5305013421465
NSN
5305-01-342-1465
MFG
OPTIMA EPS CORPORATION
Description
FASTENER LENGTH: 0.500 INCHES NOMINAL
NOMINAL THREAD DIAMETER: 0.190 INCHES
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
Related Searches:
JCM-17363
SCREW,MACHINE
NSN, MFG P/N
5305013421466
NSN
5305-01-342-1466
MFG
STRIKE WEAPONS AND UNMANNED AVIATION
Description
FASTENER LENGTH: 0.438 INCHES NOMINAL
HEAD DIAMETER: 1.250 INCHES NOMINAL
HEAD HEIGHT: 0.312 INCHES NOMINAL
HEAD STYLE: A38 FLAT CHAMFER
INTERNAL DRIVE STYLE: B24 W/O INTERNAL DRIVE
NOMINAL THREAD DIAMETER: 0.500 INCHES
SCREW MATERIAL: STEEL COMP 303
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPECIAL FEATURES: GROOVE IN HEAD 0.120 IN. W; 0.190 IN. DEEP
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.284 INCHES NOMINAL
THREAD QUANTITY PER INCH: 13
THREAD SERIES DESIGNATOR: UNC
Related Searches:
NA0067-060028
SCREW,MACHINE
NSN, MFG P/N
5305013421467
NSN
5305-01-342-1467
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
BEARING SURFACE OF HEAD SURFACE FINISH: 0.8 MICROMETERS
EXTERNAL THREAD TOLERANCE CLASS: 6G
FASTENER LENGTH: 27.7 MILLIMETERS MINIMUM AND 28.3 MILLIMETERS MAXIMUM
HEAD HEIGHT: 3.8 MILLIMETERS MINIMUM AND 4.1 MILLIMETERS MAXIMUM
HEAD STYLE: A1 HEXAGON
INTERNAL DRIVE STYLE: B5 TORQUE SET
MINIMUM TENSILE STRENGTH: 1100 MEGAPASCALS
NOMINAL THREAD DIAMETER: 6.0 MILLIMETERS
SCREW MATERIAL: IRON ALLOY 660
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5737 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SHANK SURFACE FINISH: 0.8 MICROMETERS
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 26.1 MILLIMETERS MINIMUM AND 28.3 MILLIMETERS MAXIMUM
THREAD PITCH IN MILLIMETERS: 1.0
THREAD SERIES DESIGNATOR: MJ
THREAD SURFACE FINISH: 0.8 MICROMETERS
WIDTH BETWEEN FLATS: 9.78 MILLIMETERS MINIMUM AND 10.00 MILLIMETERS MAXIMUM
Related Searches:
NA0067-060028
SCREW,MACHINE
NSN, MFG P/N
5305013421467
NSN
5305-01-342-1467
MFG
LFC INDUSTRIES INC.
Description
BEARING SURFACE OF HEAD SURFACE FINISH: 0.8 MICROMETERS
EXTERNAL THREAD TOLERANCE CLASS: 6G
FASTENER LENGTH: 27.7 MILLIMETERS MINIMUM AND 28.3 MILLIMETERS MAXIMUM
HEAD HEIGHT: 3.8 MILLIMETERS MINIMUM AND 4.1 MILLIMETERS MAXIMUM
HEAD STYLE: A1 HEXAGON
INTERNAL DRIVE STYLE: B5 TORQUE SET
MINIMUM TENSILE STRENGTH: 1100 MEGAPASCALS
NOMINAL THREAD DIAMETER: 6.0 MILLIMETERS
SCREW MATERIAL: IRON ALLOY 660
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5737 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SHANK SURFACE FINISH: 0.8 MICROMETERS
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 26.1 MILLIMETERS MINIMUM AND 28.3 MILLIMETERS MAXIMUM
THREAD PITCH IN MILLIMETERS: 1.0
THREAD SERIES DESIGNATOR: MJ
THREAD SURFACE FINISH: 0.8 MICROMETERS
WIDTH BETWEEN FLATS: 9.78 MILLIMETERS MINIMUM AND 10.00 MILLIMETERS MAXIMUM
Related Searches:
NA0067A060028
SCREW,MACHINE
NSN, MFG P/N
5305013421467
NSN
5305-01-342-1467
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
BEARING SURFACE OF HEAD SURFACE FINISH: 0.8 MICROMETERS
EXTERNAL THREAD TOLERANCE CLASS: 6G
FASTENER LENGTH: 27.7 MILLIMETERS MINIMUM AND 28.3 MILLIMETERS MAXIMUM
HEAD HEIGHT: 3.8 MILLIMETERS MINIMUM AND 4.1 MILLIMETERS MAXIMUM
HEAD STYLE: A1 HEXAGON
INTERNAL DRIVE STYLE: B5 TORQUE SET
MINIMUM TENSILE STRENGTH: 1100 MEGAPASCALS
NOMINAL THREAD DIAMETER: 6.0 MILLIMETERS
SCREW MATERIAL: IRON ALLOY 660
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5737 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SHANK SURFACE FINISH: 0.8 MICROMETERS
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 26.1 MILLIMETERS MINIMUM AND 28.3 MILLIMETERS MAXIMUM
THREAD PITCH IN MILLIMETERS: 1.0
THREAD SERIES DESIGNATOR: MJ
THREAD SURFACE FINISH: 0.8 MICROMETERS
WIDTH BETWEEN FLATS: 9.78 MILLIMETERS MINIMUM AND 10.00 MILLIMETERS MAXIMUM
Related Searches:
NAS5901-26
SCREW,MACHINE
NSN, MFG P/N
5305013421841
NSN
5305-01-342-1841
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 1.560 INCHES MINIMUM AND 1.620 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
HEAD HEIGHT: 0.080 INCHES MINIMUM AND 0.083 INCHES MAXIMUM
HEAD STYLE: A3 DISHED HEXAGON
INTERNAL DRIVE STYLE: B14 TRI-WING RECESS
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: STEEL COMP E4340 OR STEEL COMP 8740
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.560 INCHES MINIMUM AND 1.620 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
WIDTH BETWEEN FLATS: 0.243 INCHES MINIMUM AND 0.251 INCHES MAXIMUM
Related Searches:
NAS5901-15
SCREW,MACHINE
NSN, MFG P/N
5305013421842
NSN
5305-01-342-1842
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.910 INCHES MINIMUM AND 0.940 INCHES MAXIMUM
HEAD HEIGHT: 0.080 INCHES MINIMUM AND 0.083 INCHES MAXIMUM
HEAD STYLE: A3 DISHED HEXAGON
INTERNAL DRIVE STYLE: B14 TRI-WING RECESS
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: STEEL COMP E4340 OR STEEL COMP 8740
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.910 INCHES MINIMUM AND 0.940 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
WIDTH BETWEEN FLATS: 0.243 INCHES MINIMUM AND 0.251 INCHES MAXIMUM
Related Searches:
AN565E820H32
SETSCREW
NSN, MFG P/N
5305013421992
NSN
5305-01-342-1992
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN565E820H32
FASTENER LENGTH: 1.900 INCHES MINIMUM AND 2.100 INCHES MAXIMUM
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 55.0 ROCKWELL C MAXIMUM OVERALL
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
MATERIAL: STEEL COMP 4037 OR STEEL COMP 4137 OR STEEL COMP 8740 OR STEEL COMP 8630H OVERALL
NOMINAL THREAD DIAMETER: 0.500 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-200
POINT STYLE: F21 HALF DOG
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CHROMATE AND CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.861 INCHES MINIMUM AND 0.891 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.250 INCHES MINIMUM AND 0.252 INCHES MAXIMUM
Related Searches:
FF-S-200
SETSCREW
NSN, MFG P/N
5305013421992
NSN
5305-01-342-1992
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN565E820H32
FASTENER LENGTH: 1.900 INCHES MINIMUM AND 2.100 INCHES MAXIMUM
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 55.0 ROCKWELL C MAXIMUM OVERALL
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
MATERIAL: STEEL COMP 4037 OR STEEL COMP 4137 OR STEEL COMP 8740 OR STEEL COMP 8630H OVERALL
NOMINAL THREAD DIAMETER: 0.500 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-200
POINT STYLE: F21 HALF DOG
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CHROMATE AND CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.861 INCHES MINIMUM AND 0.891 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.250 INCHES MINIMUM AND 0.252 INCHES MAXIMUM
Related Searches:
913M3X4
SETSCREW
NSN, MFG P/N
5305013421993
NSN
5305-01-342-1993
MFG
METRIC AND MULTISTANDARD COMPONENTS CORP
Description
EXTERNAL THREAD TOLERANCE CLASS: 6G
FASTENER LENGTH: 4.0 MILLIMETERS NOMINAL
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 304 OVERALL
NOMINAL THREAD DIAMETER: 3.0 MILLIMETERS
POINT STYLE: F19 FLAT
THREAD DIRECTION: RIGHT-HAND
THREAD PITCH IN MILLIMETERS: 0.5
THREAD SERIES DESIGNATOR: M
WIDTH ACROSS FLATS: 1.5 MILLIMETERS NOMINAL
Related Searches:
DIN 913 M3X4
SETSCREW
NSN, MFG P/N
5305013421993
NSN
5305-01-342-1993
MFG
METRIC AND MULTISTANDARD COMPONENTS CORP
Description
EXTERNAL THREAD TOLERANCE CLASS: 6G
FASTENER LENGTH: 4.0 MILLIMETERS NOMINAL
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 304 OVERALL
NOMINAL THREAD DIAMETER: 3.0 MILLIMETERS
POINT STYLE: F19 FLAT
THREAD DIRECTION: RIGHT-HAND
THREAD PITCH IN MILLIMETERS: 0.5
THREAD SERIES DESIGNATOR: M
WIDTH ACROSS FLATS: 1.5 MILLIMETERS NOMINAL
Related Searches:
DIN 913 M3X4 STEEL
SETSCREW
NSN, MFG P/N
5305013421993
NSN
5305-01-342-1993
MFG
METRIC AND MULTISTANDARD COMPONENTS CORP
Description
EXTERNAL THREAD TOLERANCE CLASS: 6G
FASTENER LENGTH: 4.0 MILLIMETERS NOMINAL
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 304 OVERALL
NOMINAL THREAD DIAMETER: 3.0 MILLIMETERS
POINT STYLE: F19 FLAT
THREAD DIRECTION: RIGHT-HAND
THREAD PITCH IN MILLIMETERS: 0.5
THREAD SERIES DESIGNATOR: M
WIDTH ACROSS FLATS: 1.5 MILLIMETERS NOMINAL
Related Searches:
DIN 913 ST M3X4
SETSCREW
NSN, MFG P/N
5305013421993
NSN
5305-01-342-1993
MFG
METRIC AND MULTISTANDARD COMPONENTS CORP
Description
EXTERNAL THREAD TOLERANCE CLASS: 6G
FASTENER LENGTH: 4.0 MILLIMETERS NOMINAL
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 304 OVERALL
NOMINAL THREAD DIAMETER: 3.0 MILLIMETERS
POINT STYLE: F19 FLAT
THREAD DIRECTION: RIGHT-HAND
THREAD PITCH IN MILLIMETERS: 0.5
THREAD SERIES DESIGNATOR: M
WIDTH ACROSS FLATS: 1.5 MILLIMETERS NOMINAL
Related Searches:
H10072
SETSCREW
NSN, MFG P/N
5305013421993
NSN
5305-01-342-1993
MFG
SPECTRO INC. DBA INDUSTRIAL TRIBOLOGY SYSTEMS
Description
EXTERNAL THREAD TOLERANCE CLASS: 6G
FASTENER LENGTH: 4.0 MILLIMETERS NOMINAL
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 304 OVERALL
NOMINAL THREAD DIAMETER: 3.0 MILLIMETERS
POINT STYLE: F19 FLAT
THREAD DIRECTION: RIGHT-HAND
THREAD PITCH IN MILLIMETERS: 0.5
THREAD SERIES DESIGNATOR: M
WIDTH ACROSS FLATS: 1.5 MILLIMETERS NOMINAL
Related Searches:
6197484 PART 33
SETSCREW
NSN, MFG P/N
5305013421994
NSN
5305-01-342-1994
MFG
NAVAL SEA SYSTEMS COMMAND
Description
SETSCREW
Related Searches:
6197527
SETSCREW
NSN, MFG P/N
5305013421994
NSN
5305-01-342-1994
MFG
NAVAL SEA SYSTEMS COMMAND
Description
SETSCREW
Related Searches:
B1821BH025C250L
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013422000
NSN
5305-01-342-2000
B1821BH025C250L
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013422000
NSN
5305-01-342-2000
MFG
AMERICAN NATIONAL STANDARDS INSTITUTE DBA A N S I
Description
FASTENER LENGTH: 2.406 INCHES MINIMUM AND 2.500 INCHES MAXIMUM
HARDNESS RATING: 33.0 ROCKWELL C MINIMUM AND 39.0 ROCKWELL C MAXIMUM FASTENER
HEAD HEIGHT: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
LOCKING FEATURE: PATCH OR STRIP THREADS
MATERIAL: PLASTIC POLYAMIDE LOCKING FEATURE STEEL FASTENER
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GRADE 8 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
MINIMUM TENSILE STRENGTH: 150000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: ZINC AND CHROMATE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM B633 TY 2 ASSN STD SINGLE TREATMENT RESPONSE FASTENER
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.750 INCHES MINIMUM AND 0.937 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.428 INCHES MINIMUM AND 0.437 INCHES MAXIMUM
Related Searches:
MS90728-16L
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013422000
NSN
5305-01-342-2000
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
FASTENER LENGTH: 2.406 INCHES MINIMUM AND 2.500 INCHES MAXIMUM
HARDNESS RATING: 33.0 ROCKWELL C MINIMUM AND 39.0 ROCKWELL C MAXIMUM FASTENER
HEAD HEIGHT: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
LOCKING FEATURE: PATCH OR STRIP THREADS
MATERIAL: PLASTIC POLYAMIDE LOCKING FEATURE STEEL FASTENER
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GRADE 8 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
MINIMUM TENSILE STRENGTH: 150000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: ZINC AND CHROMATE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM B633 TY 2 ASSN STD SINGLE TREATMENT RESPONSE FASTENER
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.750 INCHES MINIMUM AND 0.937 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.428 INCHES MINIMUM AND 0.437 INCHES MAXIMUM