My Quote Request
5305-01-390-5009
20 Products
NAS1802-3D-14
SCREW,MACHINE
NSN, MFG P/N
5305013905009
NSN
5305-01-390-5009
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.859 INCHES MINIMUM AND 0.906 INCHES MAXIMUM
HEAD HEIGHT: 0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM
HEAD STYLE: A1 HEXAGON
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: IRON ALLOY 660
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.842 INCHES MINIMUM AND 0.874 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.305 INCHES MINIMUM AND 0.314 INCHES MAXIMUM
Related Searches:
799204814-003
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305013905058
NSN
5305-01-390-5058
799204814-003
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305013905058
NSN
5305-01-390-5058
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN
Description
SCREW,EXTERNALLY RELIEVED BODY
Related Searches:
7010512-001
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305013905186
NSN
5305-01-390-5186
MFG
BAE SYSTEMS NATIONAL SECURITY SOLUTIONS INC.
Description
FASTENER LENGTH: 0.497 INCHES NOMINAL
HEAD DIAMETER: 0.314 INCHES NOMINAL
HEAD HEIGHT: 0.110 INCHES NOMINAL
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 301 PRIMARY WASHER ALUMINUM ALLOY 6061 STAND-OFF STEEL CORROSION RESISTING FASTENER
MATERIAL ACCOMMODATED THICKNESS: 0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF ASTM A484 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
NOMINAL THREAD DIAMETER: 0.164 INCHES
SPECIAL FEATURES: ITEM INCLUDES A LOCKWASHER PER MS35338
SURFACE TREATMENT: PASSIVATE PRIMARY WASHER ANODIZE STAND-OFF PASSIVATE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER MIL-A-8625, TY 1, CL 1 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
FT1080-8-2-2
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305013905186
NSN
5305-01-390-5186
MFG
FASTENER TECHNOLOGY CORP
Description
FASTENER LENGTH: 0.497 INCHES NOMINAL
HEAD DIAMETER: 0.314 INCHES NOMINAL
HEAD HEIGHT: 0.110 INCHES NOMINAL
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 301 PRIMARY WASHER ALUMINUM ALLOY 6061 STAND-OFF STEEL CORROSION RESISTING FASTENER
MATERIAL ACCOMMODATED THICKNESS: 0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF ASTM A484 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
NOMINAL THREAD DIAMETER: 0.164 INCHES
SPECIAL FEATURES: ITEM INCLUDES A LOCKWASHER PER MS35338
SURFACE TREATMENT: PASSIVATE PRIMARY WASHER ANODIZE STAND-OFF PASSIVATE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER MIL-A-8625, TY 1, CL 1 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
X120-0012
SCREW,MACHINE
NSN, MFG P/N
5305013905188
NSN
5305-01-390-5188
MFG
CULLIGAN INTL CO SUB OF BEATRICE COMPANIES INC
Description
COLOR: BLACK
EXTERNAL THREAD TOLERANCE CLASS: 5.8
FASTENER LENGTH: 12.0 MILLIMETERS NOMINAL
HEAD DIAMETER: 6.0 MILLIMETERS NOMINAL
HEAD HEIGHT: 2.4 MILLIMETERS NOMINAL
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 3.0 MILLIMETERS
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW SURFACE TREATMENT: ZINC
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 12.0 MILLIMETERS MAXIMUM
THREAD PITCH IN MILLIMETERS: 0.5
THREAD SERIES DESIGNATOR: M
Related Searches:
718-563-SS-12
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305013905189
NSN
5305-01-390-5189
718-563-SS-12
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305013905189
NSN
5305-01-390-5189
MFG
ACCURATE SCREWMACHINE CORPORATION DBA A S M DIV ACCURATE SCREW MACHINE
Description
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 0.548 INCHES MINIMUM AND 0.578 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD: 0.078 INCHES NOMINAL
HEAD DIAMETER: 0.307 INCHES MINIMUM AND 0.327 INCHES MAXIMUM
HEAD HEIGHT: 0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM
HEAD STYLE: C100 KNURLED NO. 5
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL CORROSION RESISTING OVERALL
NOMINAL THREAD DIAMETER: 0.112 INCHES
POINT STYLE: F16 CONE
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.265 INCHES MINIMUM AND 0.297 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
53-10-406-24
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305013905195
NSN
5305-01-390-5195
MFG
SOUTHCO INC.
Description
FASTENER LENGTH: 0.660 INCHES NOMINAL
HEAD DIAMETER: 0.310 INCHES NOMINAL
HEAD HEIGHT: 0.190 INCHES NOMINAL
HEAD STYLE: C100 KNURLED NO. 5
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP 302 SPRING STEEL COMP 305 STAND-OFF STEEL COMP 303 FASTENER
MATERIAL ACCOMMODATED THICKNESS: 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM
NOMINAL THREAD DIAMETER: 0.112 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.280 INCHES NOMINAL
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
B1821BH038C075C
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013905203
NSN
5305-01-390-5203
B1821BH038C075C
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013905203
NSN
5305-01-390-5203
MFG
AMERICAN NATIONAL STANDARDS INSTITUTE DBA A N S I
Description
COLOR: YELLOW OR BRONZE OR OLIVE DRAB OVERALL
FASTENER LENGTH: 0.750 INCHES NOMINAL
FEATURES PROVIDED: FINISHED HEAD
HARDNESS RATING: 33.0 ROCKWELL C MINIMUM OVERALL
HEAD HEIGHT: 0.223 INCHES MINIMUM AND 0.246 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
HOLE CONFIGURATION STYLE: E6 HEXAGON FLATS
HOLE DIAMETER: 0.062 INCHES NOMINAL
HOLE QUANTITY: 1
HOLE TYPE: DRILLED
MATERIAL: STEEL OR STEEL UNS K04100 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE J429 GR8 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A354 ASSN STD 2ND MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.375 INCHES
SURFACE TREATMENT: ZINC AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM B633 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.625 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 16
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
Related Searches:
FF-S-86
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305013905211
NSN
5305-01-390-5211
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.470 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.359 INCHES MINIMUM AND 0.411 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: FED66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 155000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
NONDEFINITIVE SPEC/STD DATA: IV TYPE
SURFACE TREATMENT: ZINC AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM B633 TY2 CL3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.260 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.125 INCHES NOMINAL
Related Searches:
MS24667-20Z
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305013905211
NSN
5305-01-390-5211
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.470 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.359 INCHES MINIMUM AND 0.411 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: FED66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 155000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
NONDEFINITIVE SPEC/STD DATA: IV TYPE
SURFACE TREATMENT: ZINC AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM B633 TY2 CL3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.260 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.125 INCHES NOMINAL
Related Searches:
MS24667-20Z
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305013905211
NSN
5305-01-390-5211
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.470 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.359 INCHES MINIMUM AND 0.411 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: FED66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 155000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
NONDEFINITIVE SPEC/STD DATA: IV TYPE
SURFACE TREATMENT: ZINC AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM B633 TY2 CL3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.260 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.125 INCHES NOMINAL
Related Searches:
SC2-41
SETSCREW
NSN, MFG P/N
5305013905228
NSN
5305-01-390-5228
MFG
W. M. BERG INC
Description
SETSCREW
Related Searches:
7270-2514-00
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013905229
NSN
5305-01-390-5229
MFG
GENRAD INC
Description
EXTERNAL THREAD TOLERANCE CLASS: 6G
FASTENER LENGTH: 10.0 MILLIMETERS NOMINAL
HEAD HEIGHT: 2.8 MILLIMETERS NOMINAL
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL PROPERTY CLASS 8.8 OVERALL
MINIMUM TENSILE STRENGTH: 800 MEGAPASCALS
NOMINAL THREAD DIAMETER: 4.0 MILLIMETERS
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 4.0 MILLIMETERS NOMINAL
THREAD PITCH IN MILLIMETERS: 0.7
THREAD SERIES DESIGNATOR: M
WIDTH BETWEEN FLATS: 7.0 MILLIMETERS NOMINAL
Related Searches:
7270-2514-00
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013905229
NSN
5305-01-390-5229
MFG
GENRAD INC
Description
EXTERNAL THREAD TOLERANCE CLASS: 6G
FASTENER LENGTH: 10.0 MILLIMETERS NOMINAL
HEAD HEIGHT: 2.8 MILLIMETERS NOMINAL
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL PROPERTY CLASS 8.8 OVERALL
MINIMUM TENSILE STRENGTH: 800 MEGAPASCALS
NOMINAL THREAD DIAMETER: 4.0 MILLIMETERS
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 4.0 MILLIMETERS NOMINAL
THREAD PITCH IN MILLIMETERS: 0.7
THREAD SERIES DESIGNATOR: M
WIDTH BETWEEN FLATS: 7.0 MILLIMETERS NOMINAL
Related Searches:
7270-2514-00
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013905229
NSN
5305-01-390-5229
MFG
I E T LABS INC
Description
EXTERNAL THREAD TOLERANCE CLASS: 6G
FASTENER LENGTH: 10.0 MILLIMETERS NOMINAL
HEAD HEIGHT: 2.8 MILLIMETERS NOMINAL
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL PROPERTY CLASS 8.8 OVERALL
MINIMUM TENSILE STRENGTH: 800 MEGAPASCALS
NOMINAL THREAD DIAMETER: 4.0 MILLIMETERS
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 4.0 MILLIMETERS NOMINAL
THREAD PITCH IN MILLIMETERS: 0.7
THREAD SERIES DESIGNATOR: M
WIDTH BETWEEN FLATS: 7.0 MILLIMETERS NOMINAL
Related Searches:
7270-2514-00
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013905229
NSN
5305-01-390-5229
MFG
I E T LABS INC
Description
EXTERNAL THREAD TOLERANCE CLASS: 6G
FASTENER LENGTH: 10.0 MILLIMETERS NOMINAL
HEAD HEIGHT: 2.8 MILLIMETERS NOMINAL
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL PROPERTY CLASS 8.8 OVERALL
MINIMUM TENSILE STRENGTH: 800 MEGAPASCALS
NOMINAL THREAD DIAMETER: 4.0 MILLIMETERS
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 4.0 MILLIMETERS NOMINAL
THREAD PITCH IN MILLIMETERS: 0.7
THREAD SERIES DESIGNATOR: M
WIDTH BETWEEN FLATS: 7.0 MILLIMETERS NOMINAL
Related Searches:
DIN933M4X10-8.8
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013905229
NSN
5305-01-390-5229
DIN933M4X10-8.8
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013905229
NSN
5305-01-390-5229
MFG
BOSSARD LTD FASTENERS
Description
EXTERNAL THREAD TOLERANCE CLASS: 6G
FASTENER LENGTH: 10.0 MILLIMETERS NOMINAL
HEAD HEIGHT: 2.8 MILLIMETERS NOMINAL
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL PROPERTY CLASS 8.8 OVERALL
MINIMUM TENSILE STRENGTH: 800 MEGAPASCALS
NOMINAL THREAD DIAMETER: 4.0 MILLIMETERS
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 4.0 MILLIMETERS NOMINAL
THREAD PITCH IN MILLIMETERS: 0.7
THREAD SERIES DESIGNATOR: M
WIDTH BETWEEN FLATS: 7.0 MILLIMETERS NOMINAL
Related Searches:
DIN933M4X10-8.8
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013905229
NSN
5305-01-390-5229
DIN933M4X10-8.8
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013905229
NSN
5305-01-390-5229
MFG
BOSSARD LTD FASTENERS
Description
EXTERNAL THREAD TOLERANCE CLASS: 6G
FASTENER LENGTH: 10.0 MILLIMETERS NOMINAL
HEAD HEIGHT: 2.8 MILLIMETERS NOMINAL
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL PROPERTY CLASS 8.8 OVERALL
MINIMUM TENSILE STRENGTH: 800 MEGAPASCALS
NOMINAL THREAD DIAMETER: 4.0 MILLIMETERS
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 4.0 MILLIMETERS NOMINAL
THREAD PITCH IN MILLIMETERS: 0.7
THREAD SERIES DESIGNATOR: M
WIDTH BETWEEN FLATS: 7.0 MILLIMETERS NOMINAL
Related Searches:
FF-S-200
SETSCREW
NSN, MFG P/N
5305013905244
NSN
5305-01-390-5244
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
FASTENER LENGTH: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D5 HEXAGON
LOCKING FEATURE: PATCH OR PELLET OR STRIP THREADS
MANUFACTURERS CODE: 81348
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314
NOMINAL THREAD DIAMETER: 0.312 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-200
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 4 STYLE
POINT STYLE: F20 CUP
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.156 INCHES NOMINAL
~1: OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OVERALL
Related Searches:
MS51023-129
SETSCREW
NSN, MFG P/N
5305013905244
NSN
5305-01-390-5244
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D5 HEXAGON
LOCKING FEATURE: PATCH OR PELLET OR STRIP THREADS
MANUFACTURERS CODE: 81348
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314
NOMINAL THREAD DIAMETER: 0.312 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-200
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 4 STYLE
POINT STYLE: F20 CUP
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.156 INCHES NOMINAL
~1: OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OVERALL