My Quote Request
5305-01-436-8764
20 Products
3202522
SETSCREW
NSN, MFG P/N
5305014368764
NSN
5305-01-436-8764
MFG
HONEYWELL INTERNATIONAL INC DBA HONEYWELL DIV AEROSPACE-SOUTH BEND WESTMOOR ST
Description
SETSCREW
Related Searches:
R-815-2536
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305014368901
NSN
5305-01-436-8901
MFG
VERSAMIL INC
Description
SCREW,CAP,HEXAGON HEAD
Related Searches:
R-815-2536
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305014368901
NSN
5305-01-436-8901
MFG
VERSAMIL INC A PHILLIPS CO
Description
SCREW,CAP,HEXAGON HEAD
Related Searches:
R-815-2536
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305014368901
NSN
5305-01-436-8901
MFG
PHILLIPS CORPORATION D IV FEDERAL DIVISION
Description
SCREW,CAP,HEXAGON HEAD
Related Searches:
R-815-2536
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305014368901
NSN
5305-01-436-8901
MFG
PHILLIPS CORPORATION DBA FEDERAL DIVISION DIV FEDERAL DIVISION
Description
SCREW,CAP,HEXAGON HEAD
Related Searches:
FT1080-10-2-4
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305014369062
NSN
5305-01-436-9062
MFG
FASTENER TECHNOLOGY CORP
Description
FASTENER LENGTH: 0.747 INCHES NOMINAL
HEAD DIAMETER: 0.365 INCHES NOMINAL
HEAD HEIGHT: 0.206 INCHES NOMINAL
HEAD STYLE: C33 PAN NO. 2
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL CORROSION RESISTING PRIMARY WASHER ALUMINUM ALLOY 6061 STAND-OFF STEEL CORROSION RESISTING FASTENER
MATERIAL ACCOMMODATED THICKNESS: 0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF ASTM A484 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: PASSIVATE PRIMARY WASHER ANODIZE STAND-OFF PASSIVATE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER MIL-A-8625,T1,CL1 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
NAS1975C23T
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305014369087
NSN
5305-01-436-9087
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.892 INCHES MINIMUM AND 1.922 INCHES MAXIMUM
GRIP DIAMETER: 0.311 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
GRIP LENGTH: 1.428 INCHES MINIMUM AND 1.448 INCHES MAXIMUM
HEAD DIAMETER: 0.544 INCHES MINIMUM AND 0.545 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: LANTIRN
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
S8806CC440-5
SCREW,MACHINE
NSN, MFG P/N
5305014369160
NSN
5305-01-436-9160
MFG
HONEYWELL INTERNATIONAL INC DBA HONEYWELL DIV AEROSPACE - TORRANCE
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
HEAD DIAMETER: 0.043 INCHES MINIMUM AND 0.048 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B10 SLOT
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 303SE
SCREW SURFACE TREATMENT: PASSIVATE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.262 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
401-11309-01
SCREW,MACHINE
NSN, MFG P/N
5305014369189
NSN
5305-01-436-9189
MFG
MOOG INC.
Description
SCREW,MACHINE
Related Searches:
401-11309-01
SCREW,MACHINE
NSN, MFG P/N
5305014369189
NSN
5305-01-436-9189
MFG
MOOG INC.
Description
SCREW,MACHINE
Related Searches:
16U3330-17
THUMBSCREW
NSN, MFG P/N
5305014369194
NSN
5305-01-436-9194
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN DIV LOCKHEED MARTIN AERONAUTICS COMPANY
Description
THUMBSCREW
Related Searches:
125442-1
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305014369217
NSN
5305-01-436-9217
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN DIV MISSILES AND FIRE CONTROL - ARCHBALD
Description
CRITICALITY CODE JUSTIFICATION: ZZZY
DEPARTURE FROM CITED DOCUMENT: AS MODIFIED BY MATERIAL
DESIGN CONTROL REFERENCE: 125442-1
FASTENER LENGTH: 2.000 INCHES NOMINAL
HEAD HEIGHT: 0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
INTERNAL DRIVE STYLE: D14 SLOT
MANUFACTURERS CODE: 94271
MATERIAL: STEEL OVERALL
MATERIAL ACCOMMODATED THICKNESS: 0.190 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION: SAEJ429,GRADE 8 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.500 INCHES
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
SPECIAL TEST FEATURES: SPECIAL QUALITY CONTROL TESTING
SURFACE TREATMENT: ZINC AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM B633,TY2,SC3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
TEST DATA DOCUMENT: 81349-MIL-P-23199 SPECIFICATION
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.250 INCHES NOMINAL
THREAD QUANTITY PER INCH: 13
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
Related Searches:
LL-HX9-3408
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305014369217
NSN
5305-01-436-9217
MFG
DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA
Description
CRITICALITY CODE JUSTIFICATION: ZZZY
DEPARTURE FROM CITED DOCUMENT: AS MODIFIED BY MATERIAL
DESIGN CONTROL REFERENCE: 125442-1
FASTENER LENGTH: 2.000 INCHES NOMINAL
HEAD HEIGHT: 0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
INTERNAL DRIVE STYLE: D14 SLOT
MANUFACTURERS CODE: 94271
MATERIAL: STEEL OVERALL
MATERIAL ACCOMMODATED THICKNESS: 0.190 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION: SAEJ429,GRADE 8 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.500 INCHES
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
SPECIAL TEST FEATURES: SPECIAL QUALITY CONTROL TESTING
SURFACE TREATMENT: ZINC AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM B633,TY2,SC3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
TEST DATA DOCUMENT: 81349-MIL-P-23199 SPECIFICATION
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.250 INCHES NOMINAL
THREAD QUANTITY PER INCH: 13
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
Related Searches:
3356AS718-1
SCREW,SPECIAL
NSN, MFG P/N
5305014369281
NSN
5305-01-436-9281
MFG
NAVAL AIR SYSTEMS COMMAND
Description
DESIGN CONTROL REFERENCE: NU2X2.5U0
MANUFACTURERS CODE: 32212
MATERIAL: STEEL CORROSION RESISTING
OVERALL DIAMETER: 2.0 MILLIMETERS NOMINAL
OVERALL LENGTH: 2.5 MILLIMETERS NOMINAL
SPECIAL FEATURES: 6MM FLEXIBLE BORESCOPE SET
THE MANUFACTURERS DATA:
Related Searches:
NU2X2.5U0
SCREW,SPECIAL
NSN, MFG P/N
5305014369281
NSN
5305-01-436-9281
MFG
OLYMPUS AMERICA INC. DBA MEDICAL SYSTEMS GROUP DIV MEDICAL SYSTEMS GROUP
Description
DESIGN CONTROL REFERENCE: NU2X2.5U0
MANUFACTURERS CODE: 32212
MATERIAL: STEEL CORROSION RESISTING
OVERALL DIAMETER: 2.0 MILLIMETERS NOMINAL
OVERALL LENGTH: 2.5 MILLIMETERS NOMINAL
SPECIAL FEATURES: 6MM FLEXIBLE BORESCOPE SET
THE MANUFACTURERS DATA:
Related Searches:
NU2X2.5U0
SCREW,SPECIAL
NSN, MFG P/N
5305014369281
NSN
5305-01-436-9281
MFG
OLYMPUS NDT INC.
Description
DESIGN CONTROL REFERENCE: NU2X2.5U0
MANUFACTURERS CODE: 32212
MATERIAL: STEEL CORROSION RESISTING
OVERALL DIAMETER: 2.0 MILLIMETERS NOMINAL
OVERALL LENGTH: 2.5 MILLIMETERS NOMINAL
SPECIAL FEATURES: 6MM FLEXIBLE BORESCOPE SET
THE MANUFACTURERS DATA:
Related Searches:
531118-79
SCREW,MACHINE
NSN, MFG P/N
5305014369360
NSN
5305-01-436-9360
MFG
RAYTHEON COMPANY
Description
FASTENER LENGTH: 0.375 INCHES NOMINAL
HEAD DIAMETER: 0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM
HEAD HEIGHT: 0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
HEAD STYLE: A28 ROUND
INTERNAL DRIVE STYLE: B2 CROSS RECESS TYPE II
LOCKING FEATURE MATERIAL DOCUMENT AND CLASSIFICATION: MIL-F-18240 MIL SPEC SINGLE MATERIAL RESPONSE
NOMINAL THREAD DIAMETER: 0.164 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MS1957 MIL STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.375 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
PL51957-43-1
SCREW,MACHINE
NSN, MFG P/N
5305014369360
NSN
5305-01-436-9360
MFG
LONG-LOK FASTENERS CORPORATION
Description
FASTENER LENGTH: 0.375 INCHES NOMINAL
HEAD DIAMETER: 0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM
HEAD HEIGHT: 0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
HEAD STYLE: A28 ROUND
INTERNAL DRIVE STYLE: B2 CROSS RECESS TYPE II
LOCKING FEATURE MATERIAL DOCUMENT AND CLASSIFICATION: MIL-F-18240 MIL SPEC SINGLE MATERIAL RESPONSE
NOMINAL THREAD DIAMETER: 0.164 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MS1957 MIL STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.375 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
S-21298-79
SCREW,MACHINE
NSN, MFG P/N
5305014369360
NSN
5305-01-436-9360
MFG
NYLOK CORPORATION DBA NYLOK WESTERN FASTENER DIV NYLOK WESTERN
Description
FASTENER LENGTH: 0.375 INCHES NOMINAL
HEAD DIAMETER: 0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM
HEAD HEIGHT: 0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
HEAD STYLE: A28 ROUND
INTERNAL DRIVE STYLE: B2 CROSS RECESS TYPE II
LOCKING FEATURE MATERIAL DOCUMENT AND CLASSIFICATION: MIL-F-18240 MIL SPEC SINGLE MATERIAL RESPONSE
NOMINAL THREAD DIAMETER: 0.164 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MS1957 MIL STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.375 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
FT1415TS8-3-4
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305014369517
NSN
5305-01-436-9517
FT1415TS8-3-4
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305014369517
NSN
5305-01-436-9517
MFG
FASTENER TECHNOLOGY CORP
Description
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 0.535 INCHES NOMINAL
HEAD DIAMETER: 0.314 INCHES NOMINAL
HEAD HEIGHT: 0.115 INCHES NOMINAL
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP 304 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-23195 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.164 INCHES
SPECIAL FEATURES: SLEEVE
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC