My Quote Request
5305-01-509-8094
20 Products
3M1170C5-6A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015098094
NSN
5305-01-509-8094
MFG
BOEING COMPANY THE DBA BOEING
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
CRITICALITY CODE JUSTIFICATION: AGAV
FASTENER LENGTH: 0.829 INCHES MINIMUM AND 0.859 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD DIAMETER: 0.265 INCHES MINIMUM AND 0.272 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: F18 E/F
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEAR DRIVE RECESSS-PH13-8MO (125 KSI SHEAR),INCONEL 718 (125 KSI SHEAR), 6AL-4V TITANIUM (95 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPLINE MAJOR DIAMETER: 0.1540 INCHES MINIMUM AND 0.1560 INCHES MAXIMUM
SPLINE MINOR DIAMETER: 0.1105 INCHES MINIMUM AND 0.1125 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A`
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.345 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1027C4-5A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015098087
NSN
5305-01-509-8087
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.722 INCHES MINIMUM AND 0.752 INCHES MAXIMUM
GRIP DIAMETER: 0.249 INCHES NOMINAL
GRIP LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD DIAMETER: 0.385 INCHES MINIMUM AND 0.394 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
POINT DIAMETER: 0.425 INCHES NOMINAL
POINT STYLE: F19 FLAT
SPECIAL FEATURES: 125 KSI SHEAR STRENGTH
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.420 INCHES MINIMUM AND 0.430 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1027C4-5A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015098087
NSN
5305-01-509-8087
MFG
HI-SHEAR CORPORATION
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.722 INCHES MINIMUM AND 0.752 INCHES MAXIMUM
GRIP DIAMETER: 0.249 INCHES NOMINAL
GRIP LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD DIAMETER: 0.385 INCHES MINIMUM AND 0.394 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
POINT DIAMETER: 0.425 INCHES NOMINAL
POINT STYLE: F19 FLAT
SPECIAL FEATURES: 125 KSI SHEAR STRENGTH
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.420 INCHES MINIMUM AND 0.430 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1027C4-5A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015098087
NSN
5305-01-509-8087
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.722 INCHES MINIMUM AND 0.752 INCHES MAXIMUM
GRIP DIAMETER: 0.249 INCHES NOMINAL
GRIP LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD DIAMETER: 0.385 INCHES MINIMUM AND 0.394 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
POINT DIAMETER: 0.425 INCHES NOMINAL
POINT STYLE: F19 FLAT
SPECIAL FEATURES: 125 KSI SHEAR STRENGTH
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.420 INCHES MINIMUM AND 0.430 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1027C4-5A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015098087
NSN
5305-01-509-8087
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.722 INCHES MINIMUM AND 0.752 INCHES MAXIMUM
GRIP DIAMETER: 0.249 INCHES NOMINAL
GRIP LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD DIAMETER: 0.385 INCHES MINIMUM AND 0.394 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
POINT DIAMETER: 0.425 INCHES NOMINAL
POINT STYLE: F19 FLAT
SPECIAL FEATURES: 125 KSI SHEAR STRENGTH
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.420 INCHES MINIMUM AND 0.430 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1027C4-5A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015098087
NSN
5305-01-509-8087
MFG
EHRLE REINIGUNGSTECHNIK GMBH
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.722 INCHES MINIMUM AND 0.752 INCHES MAXIMUM
GRIP DIAMETER: 0.249 INCHES NOMINAL
GRIP LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD DIAMETER: 0.385 INCHES MINIMUM AND 0.394 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
POINT DIAMETER: 0.425 INCHES NOMINAL
POINT STYLE: F19 FLAT
SPECIAL FEATURES: 125 KSI SHEAR STRENGTH
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.420 INCHES MINIMUM AND 0.430 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
3M1170C5-5A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015098092
NSN
5305-01-509-8092
MFG
BOEING COMPANY THE DBA BOEING
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
CRITICALITY CODE JUSTIFICATION: AGAV
FASTENER LENGTH: 0.767 INCHES MINIMUM AND 0.782 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.303 INCHES MINIMUM AND 0.323 INCHES MAXIMUM
HEAD DIAMETER: 0.438 INCHES MINIMUM AND 0.445 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: F18 E/F
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEAR DRIVE RECESS-PH13-8MO (125 KSI SHEAR), INCONEL 718 (125 KSI SHEAR), 6AL-4V TITANIUM (125 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.313 INCHES
SPLINE MAJOR DIAMETER: 0.2195 INCHES MINIMUM AND 0.2225 INCHES MAXIMUM
SPLINE MINOR DIAMETER: 0.1570 INCHES MINIMUM AND 0.1600 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.469 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1027C5-5A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015098092
NSN
5305-01-509-8092
MFG
SPS TECHNOLOGIES LLC DBA AIR INDUSTRIES
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
CRITICALITY CODE JUSTIFICATION: AGAV
FASTENER LENGTH: 0.767 INCHES MINIMUM AND 0.782 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.303 INCHES MINIMUM AND 0.323 INCHES MAXIMUM
HEAD DIAMETER: 0.438 INCHES MINIMUM AND 0.445 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: F18 E/F
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEAR DRIVE RECESS-PH13-8MO (125 KSI SHEAR), INCONEL 718 (125 KSI SHEAR), 6AL-4V TITANIUM (125 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.313 INCHES
SPLINE MAJOR DIAMETER: 0.2195 INCHES MINIMUM AND 0.2225 INCHES MAXIMUM
SPLINE MINOR DIAMETER: 0.1570 INCHES MINIMUM AND 0.1600 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.469 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1027C5-5A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015098092
NSN
5305-01-509-8092
MFG
SPS TECHNOLOGIES INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
CRITICALITY CODE JUSTIFICATION: AGAV
FASTENER LENGTH: 0.767 INCHES MINIMUM AND 0.782 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.303 INCHES MINIMUM AND 0.323 INCHES MAXIMUM
HEAD DIAMETER: 0.438 INCHES MINIMUM AND 0.445 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: F18 E/F
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEAR DRIVE RECESS-PH13-8MO (125 KSI SHEAR), INCONEL 718 (125 KSI SHEAR), 6AL-4V TITANIUM (125 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.313 INCHES
SPLINE MAJOR DIAMETER: 0.2195 INCHES MINIMUM AND 0.2225 INCHES MAXIMUM
SPLINE MINOR DIAMETER: 0.1570 INCHES MINIMUM AND 0.1600 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.469 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1027C5-5A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015098092
NSN
5305-01-509-8092
MFG
PAUL R. BRILES INC. DBA PB FASTENERS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
CRITICALITY CODE JUSTIFICATION: AGAV
FASTENER LENGTH: 0.767 INCHES MINIMUM AND 0.782 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.303 INCHES MINIMUM AND 0.323 INCHES MAXIMUM
HEAD DIAMETER: 0.438 INCHES MINIMUM AND 0.445 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: F18 E/F
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEAR DRIVE RECESS-PH13-8MO (125 KSI SHEAR), INCONEL 718 (125 KSI SHEAR), 6AL-4V TITANIUM (125 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.313 INCHES
SPLINE MAJOR DIAMETER: 0.2195 INCHES MINIMUM AND 0.2225 INCHES MAXIMUM
SPLINE MINOR DIAMETER: 0.1570 INCHES MINIMUM AND 0.1600 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.469 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1027C5-5A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015098092
NSN
5305-01-509-8092
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
CRITICALITY CODE JUSTIFICATION: AGAV
FASTENER LENGTH: 0.767 INCHES MINIMUM AND 0.782 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.303 INCHES MINIMUM AND 0.323 INCHES MAXIMUM
HEAD DIAMETER: 0.438 INCHES MINIMUM AND 0.445 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: F18 E/F
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEAR DRIVE RECESS-PH13-8MO (125 KSI SHEAR), INCONEL 718 (125 KSI SHEAR), 6AL-4V TITANIUM (125 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.313 INCHES
SPLINE MAJOR DIAMETER: 0.2195 INCHES MINIMUM AND 0.2225 INCHES MAXIMUM
SPLINE MINOR DIAMETER: 0.1570 INCHES MINIMUM AND 0.1600 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.469 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1027C5-5A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015098092
NSN
5305-01-509-8092
MFG
HI-SHEAR CORPORATION
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
CRITICALITY CODE JUSTIFICATION: AGAV
FASTENER LENGTH: 0.767 INCHES MINIMUM AND 0.782 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.303 INCHES MINIMUM AND 0.323 INCHES MAXIMUM
HEAD DIAMETER: 0.438 INCHES MINIMUM AND 0.445 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: F18 E/F
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEAR DRIVE RECESS-PH13-8MO (125 KSI SHEAR), INCONEL 718 (125 KSI SHEAR), 6AL-4V TITANIUM (125 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.313 INCHES
SPLINE MAJOR DIAMETER: 0.2195 INCHES MINIMUM AND 0.2225 INCHES MAXIMUM
SPLINE MINOR DIAMETER: 0.1570 INCHES MINIMUM AND 0.1600 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.469 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1027C5-5A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015098092
NSN
5305-01-509-8092
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
CRITICALITY CODE JUSTIFICATION: AGAV
FASTENER LENGTH: 0.767 INCHES MINIMUM AND 0.782 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.303 INCHES MINIMUM AND 0.323 INCHES MAXIMUM
HEAD DIAMETER: 0.438 INCHES MINIMUM AND 0.445 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: F18 E/F
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEAR DRIVE RECESS-PH13-8MO (125 KSI SHEAR), INCONEL 718 (125 KSI SHEAR), 6AL-4V TITANIUM (125 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.313 INCHES
SPLINE MAJOR DIAMETER: 0.2195 INCHES MINIMUM AND 0.2225 INCHES MAXIMUM
SPLINE MINOR DIAMETER: 0.1570 INCHES MINIMUM AND 0.1600 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.469 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1027C5-5A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015098092
NSN
5305-01-509-8092
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
CRITICALITY CODE JUSTIFICATION: AGAV
FASTENER LENGTH: 0.767 INCHES MINIMUM AND 0.782 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.303 INCHES MINIMUM AND 0.323 INCHES MAXIMUM
HEAD DIAMETER: 0.438 INCHES MINIMUM AND 0.445 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: F18 E/F
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEAR DRIVE RECESS-PH13-8MO (125 KSI SHEAR), INCONEL 718 (125 KSI SHEAR), 6AL-4V TITANIUM (125 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.313 INCHES
SPLINE MAJOR DIAMETER: 0.2195 INCHES MINIMUM AND 0.2225 INCHES MAXIMUM
SPLINE MINOR DIAMETER: 0.1570 INCHES MINIMUM AND 0.1600 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.469 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1027C5-5A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015098092
NSN
5305-01-509-8092
MFG
ALCOA FASTENING SYSTEMS FAIRCHILD FA STENERS EUROPE - VSD GMBH
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
CRITICALITY CODE JUSTIFICATION: AGAV
FASTENER LENGTH: 0.767 INCHES MINIMUM AND 0.782 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.303 INCHES MINIMUM AND 0.323 INCHES MAXIMUM
HEAD DIAMETER: 0.438 INCHES MINIMUM AND 0.445 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: F18 E/F
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEAR DRIVE RECESS-PH13-8MO (125 KSI SHEAR), INCONEL 718 (125 KSI SHEAR), 6AL-4V TITANIUM (125 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.313 INCHES
SPLINE MAJOR DIAMETER: 0.2195 INCHES MINIMUM AND 0.2225 INCHES MAXIMUM
SPLINE MINOR DIAMETER: 0.1570 INCHES MINIMUM AND 0.1600 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.469 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1027C5-6A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015098094
NSN
5305-01-509-8094
MFG
SPS TECHNOLOGIES LLC DBA AIR INDUSTRIES
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
CRITICALITY CODE JUSTIFICATION: AGAV
FASTENER LENGTH: 0.829 INCHES MINIMUM AND 0.859 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD DIAMETER: 0.265 INCHES MINIMUM AND 0.272 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: F18 E/F
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEAR DRIVE RECESSS-PH13-8MO (125 KSI SHEAR),INCONEL 718 (125 KSI SHEAR), 6AL-4V TITANIUM (95 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPLINE MAJOR DIAMETER: 0.1540 INCHES MINIMUM AND 0.1560 INCHES MAXIMUM
SPLINE MINOR DIAMETER: 0.1105 INCHES MINIMUM AND 0.1125 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A`
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.345 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1027C5-6A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015098094
NSN
5305-01-509-8094
MFG
SPS TECHNOLOGIES INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
CRITICALITY CODE JUSTIFICATION: AGAV
FASTENER LENGTH: 0.829 INCHES MINIMUM AND 0.859 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD DIAMETER: 0.265 INCHES MINIMUM AND 0.272 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: F18 E/F
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEAR DRIVE RECESSS-PH13-8MO (125 KSI SHEAR),INCONEL 718 (125 KSI SHEAR), 6AL-4V TITANIUM (95 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPLINE MAJOR DIAMETER: 0.1540 INCHES MINIMUM AND 0.1560 INCHES MAXIMUM
SPLINE MINOR DIAMETER: 0.1105 INCHES MINIMUM AND 0.1125 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A`
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.345 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1027C5-6A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015098094
NSN
5305-01-509-8094
MFG
PAUL R. BRILES INC. DBA PB FASTENERS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
CRITICALITY CODE JUSTIFICATION: AGAV
FASTENER LENGTH: 0.829 INCHES MINIMUM AND 0.859 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD DIAMETER: 0.265 INCHES MINIMUM AND 0.272 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: F18 E/F
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEAR DRIVE RECESSS-PH13-8MO (125 KSI SHEAR),INCONEL 718 (125 KSI SHEAR), 6AL-4V TITANIUM (95 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPLINE MAJOR DIAMETER: 0.1540 INCHES MINIMUM AND 0.1560 INCHES MAXIMUM
SPLINE MINOR DIAMETER: 0.1105 INCHES MINIMUM AND 0.1125 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A`
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.345 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1027C5-6A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015098094
NSN
5305-01-509-8094
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
CRITICALITY CODE JUSTIFICATION: AGAV
FASTENER LENGTH: 0.829 INCHES MINIMUM AND 0.859 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD DIAMETER: 0.265 INCHES MINIMUM AND 0.272 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: F18 E/F
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEAR DRIVE RECESSS-PH13-8MO (125 KSI SHEAR),INCONEL 718 (125 KSI SHEAR), 6AL-4V TITANIUM (95 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPLINE MAJOR DIAMETER: 0.1540 INCHES MINIMUM AND 0.1560 INCHES MAXIMUM
SPLINE MINOR DIAMETER: 0.1105 INCHES MINIMUM AND 0.1125 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A`
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.345 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1027C5-6A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015098094
NSN
5305-01-509-8094
MFG
HI-SHEAR CORPORATION
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
CRITICALITY CODE JUSTIFICATION: AGAV
FASTENER LENGTH: 0.829 INCHES MINIMUM AND 0.859 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD DIAMETER: 0.265 INCHES MINIMUM AND 0.272 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: F18 E/F
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEAR DRIVE RECESSS-PH13-8MO (125 KSI SHEAR),INCONEL 718 (125 KSI SHEAR), 6AL-4V TITANIUM (95 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPLINE MAJOR DIAMETER: 0.1540 INCHES MINIMUM AND 0.1560 INCHES MAXIMUM
SPLINE MINOR DIAMETER: 0.1105 INCHES MINIMUM AND 0.1125 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A`
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.345 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF