My Quote Request
5305-01-513-9494
20 Products
HT4027-3-10
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015139494
NSN
5305-01-513-9494
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.406 INCHES NOMINAL
GRIP DIAMETER: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM
HEAD DIAMETER: 0.2966 INCHES MINIMUM AND 0.3016 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: TRAINING EDGE
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.406 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1024C4D13-5A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015139063
NSN
5305-01-513-9063
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
III END ITEM IDENTIFICATION: F18 E/F
Related Searches:
TX1024C4D13-5A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015139063
NSN
5305-01-513-9063
MFG
HI-SHEAR CORPORATION
Description
III END ITEM IDENTIFICATION: F18 E/F
Related Searches:
TX1024C4D13-5A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015139063
NSN
5305-01-513-9063
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
III END ITEM IDENTIFICATION: F18 E/F
Related Searches:
TX1024C4D13-5A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015139063
NSN
5305-01-513-9063
MFG
ALCOA FASTENING SYSTEMS FAIRCHILD FA STENERS EUROPE - VSD GMBH
Description
III END ITEM IDENTIFICATION: F18 E/F
Related Searches:
3M1170C5-11A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015139071
NSN
5305-01-513-9071
MFG
BOEING COMPANY THE DBA BOEING
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.142 INCHES MINIMUM AND 1.172 INCHES MAXIMUM
GRIP DIAMETER: 0.312 INCHES NOMINAL
GRIP LENGTH: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM
HEAD DIAMETER: 0.464 INCHES MINIMUM AND 0.473 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: F/A-18E/F
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
POINT DIAMETER: 0.469 INCHES NOMINAL
POINT STYLE: F19 FLAT
SPECIAL FEATURES: 125 KSI SHEAR STRENGTH
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.464 INCHES MINIMUM AND 0.474 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1027C5-11A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015139071
NSN
5305-01-513-9071
MFG
SPS TECHNOLOGIES LLC DBA AIR INDUSTRIES
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.142 INCHES MINIMUM AND 1.172 INCHES MAXIMUM
GRIP DIAMETER: 0.312 INCHES NOMINAL
GRIP LENGTH: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM
HEAD DIAMETER: 0.464 INCHES MINIMUM AND 0.473 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: F/A-18E/F
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
POINT DIAMETER: 0.469 INCHES NOMINAL
POINT STYLE: F19 FLAT
SPECIAL FEATURES: 125 KSI SHEAR STRENGTH
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.464 INCHES MINIMUM AND 0.474 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1027C5-11A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015139071
NSN
5305-01-513-9071
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.142 INCHES MINIMUM AND 1.172 INCHES MAXIMUM
GRIP DIAMETER: 0.312 INCHES NOMINAL
GRIP LENGTH: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM
HEAD DIAMETER: 0.464 INCHES MINIMUM AND 0.473 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: F/A-18E/F
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
POINT DIAMETER: 0.469 INCHES NOMINAL
POINT STYLE: F19 FLAT
SPECIAL FEATURES: 125 KSI SHEAR STRENGTH
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.464 INCHES MINIMUM AND 0.474 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1027C5-11A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015139071
NSN
5305-01-513-9071
MFG
PAUL R. BRILES INC. DBA PB FASTENERS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.142 INCHES MINIMUM AND 1.172 INCHES MAXIMUM
GRIP DIAMETER: 0.312 INCHES NOMINAL
GRIP LENGTH: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM
HEAD DIAMETER: 0.464 INCHES MINIMUM AND 0.473 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: F/A-18E/F
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
POINT DIAMETER: 0.469 INCHES NOMINAL
POINT STYLE: F19 FLAT
SPECIAL FEATURES: 125 KSI SHEAR STRENGTH
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.464 INCHES MINIMUM AND 0.474 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1027C5-11A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015139071
NSN
5305-01-513-9071
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.142 INCHES MINIMUM AND 1.172 INCHES MAXIMUM
GRIP DIAMETER: 0.312 INCHES NOMINAL
GRIP LENGTH: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM
HEAD DIAMETER: 0.464 INCHES MINIMUM AND 0.473 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: F/A-18E/F
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
POINT DIAMETER: 0.469 INCHES NOMINAL
POINT STYLE: F19 FLAT
SPECIAL FEATURES: 125 KSI SHEAR STRENGTH
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.464 INCHES MINIMUM AND 0.474 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1027C5-11A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015139071
NSN
5305-01-513-9071
MFG
HI-SHEAR CORPORATION
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.142 INCHES MINIMUM AND 1.172 INCHES MAXIMUM
GRIP DIAMETER: 0.312 INCHES NOMINAL
GRIP LENGTH: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM
HEAD DIAMETER: 0.464 INCHES MINIMUM AND 0.473 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: F/A-18E/F
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
POINT DIAMETER: 0.469 INCHES NOMINAL
POINT STYLE: F19 FLAT
SPECIAL FEATURES: 125 KSI SHEAR STRENGTH
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.464 INCHES MINIMUM AND 0.474 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1027C5-11A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015139071
NSN
5305-01-513-9071
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.142 INCHES MINIMUM AND 1.172 INCHES MAXIMUM
GRIP DIAMETER: 0.312 INCHES NOMINAL
GRIP LENGTH: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM
HEAD DIAMETER: 0.464 INCHES MINIMUM AND 0.473 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: F/A-18E/F
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
POINT DIAMETER: 0.469 INCHES NOMINAL
POINT STYLE: F19 FLAT
SPECIAL FEATURES: 125 KSI SHEAR STRENGTH
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.464 INCHES MINIMUM AND 0.474 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1027C5-11A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015139071
NSN
5305-01-513-9071
MFG
ALCOA FASTENING SYSTEMS FAIRCHILD FA STENERS EUROPE - VSD GMBH
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.142 INCHES MINIMUM AND 1.172 INCHES MAXIMUM
GRIP DIAMETER: 0.312 INCHES NOMINAL
GRIP LENGTH: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM
HEAD DIAMETER: 0.464 INCHES MINIMUM AND 0.473 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: F/A-18E/F
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
POINT DIAMETER: 0.469 INCHES NOMINAL
POINT STYLE: F19 FLAT
SPECIAL FEATURES: 125 KSI SHEAR STRENGTH
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.464 INCHES MINIMUM AND 0.474 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
B1867BC040550
SCREW,MACHINE
NSN, MFG P/N
5305015139127
NSN
5305-01-513-9127
MFG
AMERICAN NATIONAL STANDARDS INSTITUTE DBA A N S I
Description
EXTERNAL THREAD TOLERANCE CLASS: 6H6H
FASTENER LENGTH: 55.0 MILLIMETERS NOMINAL
HEAD DIAMETER: 7.6 MILLIMETERS MINIMUM AND 8.0 MILLIMETERS MAXIMUM
HEAD HEIGHT: 2.45 MILLIMETERS NOMINAL
HEAD STYLE: A23 PAN
III END ITEM IDENTIFICATION: INTERIM ARMORED VEHICLE (IAV),CONTRACTOR LOGISTICS SUPPORT (CLS)
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 4.0 MILLIMETERS
SCREW MATERIAL: STEEL PROPERTY CLASS 9.8
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: ASTM F568M ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: ZINC
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM B633,FE/ZN 5,TY II ASSN STD SINGLE TREATMENT RESPONSE
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 38.0 MILLIMETERS NOMINAL
THREAD PITCH IN MILLIMETERS: 0.7
THREAD SERIES DESIGNATOR: M
Related Searches:
B1835B05016N
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305015139134
NSN
5305-01-513-9134
MFG
AMERICAN NATIONAL STANDARDS INSTITUTE DBA A N S I
Description
COUNTERSINK ANGLE: 90.0 DEGREES NOMINAL
EXTERNAL THREAD TOLERANCE CLASS: 4G6G
FASTENER LENGTH: 16.0 MILLIMETERS NOMINAL
HEAD DIAMETER: 9.75 MILLIMETERS MINIMUM AND 11.20 MILLIMETERS MAXIMUM
HEAD HEIGHT: 3.10 MILLIMETERS NOMINAL
HEAD STYLE: C46 FILLISTER COUNTERSUNK
III END ITEM IDENTIFICATION: INTERIM ARMORED VEHICLE (IAV),CONTRACTOR LOGISTICS SUPPORT (CLS)
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM F835M ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 5.0 MILLIMETERS
SPECIAL FEATURES: SPECIFIC MATL IS ALLOY STEEL
SURFACE TREATMENT: ZINC OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM B633 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 15.5 MILLIMETERS NOMINAL
THREAD PITCH IN MILLIMETERS: 0.8
THREAD SERIES DESIGNATOR: M
WIDTH ACROSS FLATS: 3.0 MILLIMETERS NOMINAL
Related Searches:
020296
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305015139145
NSN
5305-01-513-9145
MFG
TRW INC DBA COMMERCIAL STEERING DIVISION
Description
SCREW,CAP,SOCKET HEAD
Related Searches:
38030L-94C-10
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305015139145
NSN
5305-01-513-9145
MFG
SPS TECHNOLOGIES INC UNBRAKO DIV
Description
SCREW,CAP,SOCKET HEAD
Related Searches:
130927-1
SCREW,MACHINE
NSN, MFG P/N
5305015139177
NSN
5305-01-513-9177
MFG
RAYTHEON COMPANY DBA RAYTHEON USE CAGE CODE 37695 FOR CATALOGING.
Description
FASTENER LENGTH: 0.166 INCHES MINIMUM AND 0.176 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: AN/PSC-5D MAN-PACK SATTELITE COMMUNICATIONS SYSTEM
INTERNAL DRIVE STYLE: B2 CROSS RECESS TYPE II
NOMINAL THREAD DIAMETER: 0.086 INCHES
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNC
Related Searches:
MA1041E
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305015139290
NSN
5305-01-513-9290
MFG
TWIN DISC INCORPORATED
Description
SCREW,CAP,HEXAGON HEAD
Related Searches:
HT4027-3-10
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015139494
NSN
5305-01-513-9494
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.406 INCHES NOMINAL
GRIP DIAMETER: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM
HEAD DIAMETER: 0.2966 INCHES MINIMUM AND 0.3016 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: TRAINING EDGE
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.406 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF