My Quote Request
5305-01-513-9641
20 Products
HT4027-7-13
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015139641
NSN
5305-01-513-9641
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.453 INCHES MINIMUM AND 1.483 INCHES MAXIMUM
GRIP DIAMETER: 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
GRIP LENGTH: 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM
HEAD DIAMETER: 0.672 INCHES NOMINAL
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: WING AIRCRAFT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.438 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.656 INCHES NOMINAL
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4027-4-5
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015139637
NSN
5305-01-513-9637
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.766 INCHES MINIMUM AND 0.796 INCHES MAXIMUM
GRIP DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD DIAMETER: 0.3898 INCHES MINIMUM AND 0.3948 INCHES MAXIMUM
HEAD STYLE: C54 OVAL COUNTERSUNK
III END ITEM IDENTIFICATION: WING AIRCRAFT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.469 INCHES NOMINAL
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4027-4-5
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015139637
NSN
5305-01-513-9637
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.766 INCHES MINIMUM AND 0.796 INCHES MAXIMUM
GRIP DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD DIAMETER: 0.3898 INCHES MINIMUM AND 0.3948 INCHES MAXIMUM
HEAD STYLE: C54 OVAL COUNTERSUNK
III END ITEM IDENTIFICATION: WING AIRCRAFT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.469 INCHES NOMINAL
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
ST3M557
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015139637
NSN
5305-01-513-9637
MFG
BOEING COMPANY THE DBA BOEING
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.766 INCHES MINIMUM AND 0.796 INCHES MAXIMUM
GRIP DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD DIAMETER: 0.3898 INCHES MINIMUM AND 0.3948 INCHES MAXIMUM
HEAD STYLE: C54 OVAL COUNTERSUNK
III END ITEM IDENTIFICATION: WING AIRCRAFT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.469 INCHES NOMINAL
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
ST3M557-4-5
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015139637
NSN
5305-01-513-9637
MFG
FASTENER INNOVATION TECHNOLOGY INC DBA F.I.T.
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.766 INCHES MINIMUM AND 0.796 INCHES MAXIMUM
GRIP DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD DIAMETER: 0.3898 INCHES MINIMUM AND 0.3948 INCHES MAXIMUM
HEAD STYLE: C54 OVAL COUNTERSUNK
III END ITEM IDENTIFICATION: WING AIRCRAFT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.469 INCHES NOMINAL
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
ST3M557-4-5
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015139637
NSN
5305-01-513-9637
MFG
BOEING COMPANY THE DBA BOEING
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.766 INCHES MINIMUM AND 0.796 INCHES MAXIMUM
GRIP DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD DIAMETER: 0.3898 INCHES MINIMUM AND 0.3948 INCHES MAXIMUM
HEAD STYLE: C54 OVAL COUNTERSUNK
III END ITEM IDENTIFICATION: WING AIRCRAFT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.469 INCHES NOMINAL
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
WC4027-4-5
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015139637
NSN
5305-01-513-9637
MFG
WEST COAST AEROSPACE INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.766 INCHES MINIMUM AND 0.796 INCHES MAXIMUM
GRIP DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD DIAMETER: 0.3898 INCHES MINIMUM AND 0.3948 INCHES MAXIMUM
HEAD STYLE: C54 OVAL COUNTERSUNK
III END ITEM IDENTIFICATION: WING AIRCRAFT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.469 INCHES NOMINAL
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4027-7-12
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015139639
NSN
5305-01-513-9639
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.391 INCHES MINIMUM AND 1.421 INCHES MAXIMUM
GRIP DIAMETER: 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
GRIP LENGTH: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
HEAD DIAMETER: 0.672 INCHES NOMINAL
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: WING AIRCRAFT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.438 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.656 INCHES NOMINAL
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4027-7-12
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015139639
NSN
5305-01-513-9639
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.391 INCHES MINIMUM AND 1.421 INCHES MAXIMUM
GRIP DIAMETER: 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
GRIP LENGTH: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
HEAD DIAMETER: 0.672 INCHES NOMINAL
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: WING AIRCRAFT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.438 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.656 INCHES NOMINAL
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4027-7-12
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015139639
NSN
5305-01-513-9639
MFG
HI-SHEAR CORPORATION
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.391 INCHES MINIMUM AND 1.421 INCHES MAXIMUM
GRIP DIAMETER: 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
GRIP LENGTH: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
HEAD DIAMETER: 0.672 INCHES NOMINAL
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: WING AIRCRAFT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.438 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.656 INCHES NOMINAL
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4027-7-12
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015139639
NSN
5305-01-513-9639
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.391 INCHES MINIMUM AND 1.421 INCHES MAXIMUM
GRIP DIAMETER: 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
GRIP LENGTH: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
HEAD DIAMETER: 0.672 INCHES NOMINAL
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: WING AIRCRAFT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.438 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.656 INCHES NOMINAL
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
ST3M557
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015139639
NSN
5305-01-513-9639
MFG
BOEING COMPANY THE DBA BOEING
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.391 INCHES MINIMUM AND 1.421 INCHES MAXIMUM
GRIP DIAMETER: 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
GRIP LENGTH: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
HEAD DIAMETER: 0.672 INCHES NOMINAL
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: WING AIRCRAFT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.438 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.656 INCHES NOMINAL
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
ST3M557-7-12
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015139639
NSN
5305-01-513-9639
MFG
BOEING COMPANY THE DBA BOEING
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.391 INCHES MINIMUM AND 1.421 INCHES MAXIMUM
GRIP DIAMETER: 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
GRIP LENGTH: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
HEAD DIAMETER: 0.672 INCHES NOMINAL
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: WING AIRCRAFT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.438 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.656 INCHES NOMINAL
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
ST3M557-7-12
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015139639
NSN
5305-01-513-9639
MFG
FASTENER INNOVATION TECHNOLOGY INC DBA F.I.T.
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.391 INCHES MINIMUM AND 1.421 INCHES MAXIMUM
GRIP DIAMETER: 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
GRIP LENGTH: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
HEAD DIAMETER: 0.672 INCHES NOMINAL
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: WING AIRCRAFT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.438 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.656 INCHES NOMINAL
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
WC4027-7-12
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015139639
NSN
5305-01-513-9639
MFG
WEST COAST AEROSPACE INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.391 INCHES MINIMUM AND 1.421 INCHES MAXIMUM
GRIP DIAMETER: 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
GRIP LENGTH: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
HEAD DIAMETER: 0.672 INCHES NOMINAL
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: WING AIRCRAFT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.438 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.656 INCHES NOMINAL
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4027-7-13
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015139641
NSN
5305-01-513-9641
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.453 INCHES MINIMUM AND 1.483 INCHES MAXIMUM
GRIP DIAMETER: 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
GRIP LENGTH: 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM
HEAD DIAMETER: 0.672 INCHES NOMINAL
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: WING AIRCRAFT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.438 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.656 INCHES NOMINAL
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4027-7-13
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015139641
NSN
5305-01-513-9641
MFG
HI-SHEAR CORPORATION
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.453 INCHES MINIMUM AND 1.483 INCHES MAXIMUM
GRIP DIAMETER: 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
GRIP LENGTH: 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM
HEAD DIAMETER: 0.672 INCHES NOMINAL
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: WING AIRCRAFT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.438 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.656 INCHES NOMINAL
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4027-7-13
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015139641
NSN
5305-01-513-9641
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.453 INCHES MINIMUM AND 1.483 INCHES MAXIMUM
GRIP DIAMETER: 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
GRIP LENGTH: 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM
HEAD DIAMETER: 0.672 INCHES NOMINAL
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: WING AIRCRAFT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.438 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.656 INCHES NOMINAL
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
ST3M557
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015139641
NSN
5305-01-513-9641
MFG
BOEING COMPANY THE DBA BOEING
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.453 INCHES MINIMUM AND 1.483 INCHES MAXIMUM
GRIP DIAMETER: 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
GRIP LENGTH: 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM
HEAD DIAMETER: 0.672 INCHES NOMINAL
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: WING AIRCRAFT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.438 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.656 INCHES NOMINAL
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
ST3M557-7-13
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015139641
NSN
5305-01-513-9641
MFG
BOEING COMPANY THE DBA BOEING
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.453 INCHES MINIMUM AND 1.483 INCHES MAXIMUM
GRIP DIAMETER: 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
GRIP LENGTH: 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM
HEAD DIAMETER: 0.672 INCHES NOMINAL
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: WING AIRCRAFT
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.438 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.656 INCHES NOMINAL
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF