My Quote Request
5305-01-521-9556
20 Products
11923-3-13
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015219556
NSN
5305-01-521-9556
MFG
REID PRODUCTS INC.
Description
COUNTERSINK ANGLE: 99.0 DEGREES NOMINAL AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.218 INCHES NOMINAL
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.812 INCHES NOMINAL
HEAD DIAMETER: 0.293 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEARDRIVE RECESS-SPECIAL THREAD LENGTH INCONCEL 718 (125 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: BPS-F-69 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4027-3-24
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015219552
NSN
5305-01-521-9552
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES NOMINAL AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.906 INCHES NOMINAL
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 1.500 INCHES NOMINAL
HEAD DIAMETER: 0.293 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEARDRIVE RECESS-SPECIAL THREAD LENGTH INCONCEL 718 (125 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: BPS-F-69 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4027-3-24
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015219552
NSN
5305-01-521-9552
MFG
SPS TECHNOLOGIES INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES NOMINAL AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.906 INCHES NOMINAL
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 1.500 INCHES NOMINAL
HEAD DIAMETER: 0.293 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEARDRIVE RECESS-SPECIAL THREAD LENGTH INCONCEL 718 (125 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: BPS-F-69 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4027-3-24
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015219552
NSN
5305-01-521-9552
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
COUNTERSINK ANGLE: 99.0 DEGREES NOMINAL AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.906 INCHES NOMINAL
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 1.500 INCHES NOMINAL
HEAD DIAMETER: 0.293 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEARDRIVE RECESS-SPECIAL THREAD LENGTH INCONCEL 718 (125 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: BPS-F-69 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4027-3-24
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015219552
NSN
5305-01-521-9552
MFG
HI-SHEAR CORPORATION
Description
COUNTERSINK ANGLE: 99.0 DEGREES NOMINAL AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.906 INCHES NOMINAL
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 1.500 INCHES NOMINAL
HEAD DIAMETER: 0.293 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEARDRIVE RECESS-SPECIAL THREAD LENGTH INCONCEL 718 (125 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: BPS-F-69 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4027-3-24
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015219552
NSN
5305-01-521-9552
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
COUNTERSINK ANGLE: 99.0 DEGREES NOMINAL AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.906 INCHES NOMINAL
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 1.500 INCHES NOMINAL
HEAD DIAMETER: 0.293 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEARDRIVE RECESS-SPECIAL THREAD LENGTH INCONCEL 718 (125 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: BPS-F-69 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
ST3M557
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015219552
NSN
5305-01-521-9552
MFG
BOEING COMPANY THE DBA BOEING
Description
COUNTERSINK ANGLE: 99.0 DEGREES NOMINAL AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.906 INCHES NOMINAL
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 1.500 INCHES NOMINAL
HEAD DIAMETER: 0.293 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEARDRIVE RECESS-SPECIAL THREAD LENGTH INCONCEL 718 (125 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: BPS-F-69 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
ST3M557-3-24
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015219552
NSN
5305-01-521-9552
MFG
BOEING COMPANY THE DBA BOEING
Description
COUNTERSINK ANGLE: 99.0 DEGREES NOMINAL AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.906 INCHES NOMINAL
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 1.500 INCHES NOMINAL
HEAD DIAMETER: 0.293 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEARDRIVE RECESS-SPECIAL THREAD LENGTH INCONCEL 718 (125 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: BPS-F-69 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
ST3M557-3-24
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015219552
NSN
5305-01-521-9552
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES NOMINAL AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.906 INCHES NOMINAL
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 1.500 INCHES NOMINAL
HEAD DIAMETER: 0.293 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEARDRIVE RECESS-SPECIAL THREAD LENGTH INCONCEL 718 (125 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: BPS-F-69 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
ST3M557-3-24
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015219552
NSN
5305-01-521-9552
MFG
SPS TECHNOLOGIES INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES NOMINAL AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.906 INCHES NOMINAL
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 1.500 INCHES NOMINAL
HEAD DIAMETER: 0.293 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEARDRIVE RECESS-SPECIAL THREAD LENGTH INCONCEL 718 (125 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: BPS-F-69 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
ST3M557-3-24
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015219552
NSN
5305-01-521-9552
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
COUNTERSINK ANGLE: 99.0 DEGREES NOMINAL AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.906 INCHES NOMINAL
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 1.500 INCHES NOMINAL
HEAD DIAMETER: 0.293 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEARDRIVE RECESS-SPECIAL THREAD LENGTH INCONCEL 718 (125 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: BPS-F-69 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
ST3M557-3-24
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015219552
NSN
5305-01-521-9552
MFG
FASTENER INNOVATION TECHNOLOGY INC DBA F.I.T.
Description
COUNTERSINK ANGLE: 99.0 DEGREES NOMINAL AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.906 INCHES NOMINAL
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 1.500 INCHES NOMINAL
HEAD DIAMETER: 0.293 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEARDRIVE RECESS-SPECIAL THREAD LENGTH INCONCEL 718 (125 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: BPS-F-69 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
ST3M557-3-24
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015219552
NSN
5305-01-521-9552
MFG
WEST COAST AEROSPACE INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES NOMINAL AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.906 INCHES NOMINAL
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 1.500 INCHES NOMINAL
HEAD DIAMETER: 0.293 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEARDRIVE RECESS-SPECIAL THREAD LENGTH INCONCEL 718 (125 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: BPS-F-69 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
ST3M557-3-24
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015219552
NSN
5305-01-521-9552
MFG
HI-SHEAR CORPORATION
Description
COUNTERSINK ANGLE: 99.0 DEGREES NOMINAL AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.906 INCHES NOMINAL
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 1.500 INCHES NOMINAL
HEAD DIAMETER: 0.293 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEARDRIVE RECESS-SPECIAL THREAD LENGTH INCONCEL 718 (125 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: BPS-F-69 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
ST3M557-3-24
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015219552
NSN
5305-01-521-9552
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
COUNTERSINK ANGLE: 99.0 DEGREES NOMINAL AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.906 INCHES NOMINAL
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 1.500 INCHES NOMINAL
HEAD DIAMETER: 0.293 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEARDRIVE RECESS-SPECIAL THREAD LENGTH INCONCEL 718 (125 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: BPS-F-69 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
WC4027-3-24
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015219552
NSN
5305-01-521-9552
MFG
WEST COAST AEROSPACE INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES NOMINAL AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.906 INCHES NOMINAL
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 1.500 INCHES NOMINAL
HEAD DIAMETER: 0.293 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEARDRIVE RECESS-SPECIAL THREAD LENGTH INCONCEL 718 (125 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: BPS-F-69 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4027-3-13
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015219556
NSN
5305-01-521-9556
MFG
SPS TECHNOLOGIES LLC DBA AIR INDUSTRIES
Description
COUNTERSINK ANGLE: 99.0 DEGREES NOMINAL AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.218 INCHES NOMINAL
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.812 INCHES NOMINAL
HEAD DIAMETER: 0.293 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEARDRIVE RECESS-SPECIAL THREAD LENGTH INCONCEL 718 (125 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: BPS-F-69 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4027-3-13
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015219556
NSN
5305-01-521-9556
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES NOMINAL AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.218 INCHES NOMINAL
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.812 INCHES NOMINAL
HEAD DIAMETER: 0.293 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEARDRIVE RECESS-SPECIAL THREAD LENGTH INCONCEL 718 (125 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: BPS-F-69 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4027-3-13
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015219556
NSN
5305-01-521-9556
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES NOMINAL AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.218 INCHES NOMINAL
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.812 INCHES NOMINAL
HEAD DIAMETER: 0.293 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEARDRIVE RECESS-SPECIAL THREAD LENGTH INCONCEL 718 (125 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: BPS-F-69 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4027-3-13
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015219556
NSN
5305-01-521-9556
MFG
PAUL R. BRILES INC. DBA PB FASTENERS
Description
COUNTERSINK ANGLE: 99.0 DEGREES NOMINAL AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.218 INCHES NOMINAL
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.812 INCHES NOMINAL
HEAD DIAMETER: 0.293 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEARDRIVE RECESS-SPECIAL THREAD LENGTH INCONCEL 718 (125 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: BPS-F-69 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF