My Quote Request
5306-00-894-1535
20 Products
P14750
BOLT,MACHINE
NSN, MFG P/N
5306008941535
NSN
5306-00-894-1535
MFG
UNITED TECHNOLOGIES CORPORATION DBA PRATT & WHITNEY DIV SPARES/SUPPORT EQUIPMENT
Description
FASTENER LENGTH: 1.500 INCHES NOMINAL
FEATURES PROVIDED: UNFINISHED HEAD
HEAD HEIGHT: 0.344 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.500 INCHES
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.500 INCHES MINIMUM
THREAD QUANTITY PER INCH: 13
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.750 INCHES NOMINAL
Related Searches:
LP5-4A
BOLT,MACHINE
NSN, MFG P/N
5306008941982
NSN
5306-00-894-1982
MFG
LONG-LOK FASTENERS CORPORATION
Description
FASTENER LENGTH: 0.594 INCHES NOMINAL
FEATURES PROVIDED: FINISHED HEAD
HEAD HEIGHT: 0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE TREATMENT: CADMIUM OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.531 INCHES MINIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.490 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
Related Searches:
123AMM40185-1
BOLT,INTERNALLY RELIEVED BODY
NSN, MFG P/N
5306008942124
NSN
5306-00-894-2124
123AMM40185-1
BOLT,INTERNALLY RELIEVED BODY
NSN, MFG P/N
5306008942124
NSN
5306-00-894-2124
MFG
NORTHROP GRUMMAN SYSTEMS CORPORATION DIV NORTHROP GRUMMAN AEROSPACE SYSTEMS
Description
CONCENTRIC HOLE DIAMETER: 0.717 INCHES MINIMUM AND 0.726 INCHES MAXIMUM
COUNTERBORE DEPTH: 1.312 INCHES NOMINAL
COUNTERBORE DIAMETER: 0.858 INCHES MINIMUM AND 0.869 INCHES MAXIMUM
DESIGN CONTROL REFERENCE: 123AMM40185-1
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 2.437 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH: 2.562 INCHES NOMINAL
HARDNESS RATING: 37.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 1.750 INCHES NOMINAL
HEAD HEIGHT: 0.190 INCHES NOMINAL
HEAD STYLE: C23 ROUND W/WRENCH FLATS
MANUFACTURERS CODE: 26512
MATERIAL: STEEL COMP 4340 OVERALL
MINIMUM TENSILE STRENGTH: 165 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 1.125 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.069 INCHES MINIMUM AND 0.074 INCHES MAXIMUM FIRST HOLE
SHOULDER DIAMETER: 1.247 INCHES MINIMUM AND 1.248 INCHES MAXIMUM
SHOULDER LENGTH: 1.598 INCHES NOMINAL
STYLE DESIGNATOR: B49 COUNTERBORE UNTHREADED
SURFACE TREATMENT: CADMIUM OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.964 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 12
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 1.500 INCHES NOMINAL
Related Searches:
R1068P005SL
BOLT,MACHINE
NSN, MFG P/N
5306008942297
NSN
5306-00-894-2297
MFG
GENERAL ELECTRIC COMPANY DBA GE DIV GE - AVIATION
Description
EXTENDED WASHER DIAMETER: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM
FASTENER LENGTH: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM
FEATURES PROVIDED: FINISHED HEAD
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD STYLE: C10 DOUBLE HEXAGON W/HOLE
HOLE CONFIGURATION STYLE: E5 HEXAGON LONGITUDINAL HOLE
HOLE DIAMETER: 0.046 INCHES NOMINAL
HOLE QUANTITY: 4
HOLE TYPE: DRILLED
III PRECIOUS MATERIAL: SILVER
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
NONSTANDARD THREAD PITCH DIAMETER: 0.1644 TO 0.1667 INCHES
SURFACE TREATMENT: SILVER OVERALL
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNS
WIDTH BETWEEN FLATS: 0.243 INCHES MINIMUM AND 0.251 INCHES MAXIMUM
Related Searches:
R1068P005SL
BOLT,MACHINE
NSN, MFG P/N
5306008942297
NSN
5306-00-894-2297
MFG
GENERAL ELECTRIC COMPANY DBA GE STRUCTURED SERVICES DIV GENERAL ELECTRIC STRUCTURED SERVICES LP
Description
EXTENDED WASHER DIAMETER: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM
FASTENER LENGTH: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM
FEATURES PROVIDED: FINISHED HEAD
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD STYLE: C10 DOUBLE HEXAGON W/HOLE
HOLE CONFIGURATION STYLE: E5 HEXAGON LONGITUDINAL HOLE
HOLE DIAMETER: 0.046 INCHES NOMINAL
HOLE QUANTITY: 4
HOLE TYPE: DRILLED
III PRECIOUS MATERIAL: SILVER
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
NONSTANDARD THREAD PITCH DIAMETER: 0.1644 TO 0.1667 INCHES
SURFACE TREATMENT: SILVER OVERALL
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNS
WIDTH BETWEEN FLATS: 0.243 INCHES MINIMUM AND 0.251 INCHES MAXIMUM
Related Searches:
1DD321
BOLT,MACHINE
NSN, MFG P/N
5306008942381
NSN
5306-00-894-2381
MFG
OSHKOSH CORPORATION
Description
FASTENER LENGTH: 3.875 INCHES NOMINAL
III END ITEM IDENTIFICATION: 2320-01-304-2277 AND 2320-01-304-2278 PLS (PALLETIZED LOADING SYSTEM)
NOMINAL THREAD DIAMETER: 0.375 INCHES
THREAD QUANTITY PER INCH: 24
Related Searches:
5121466
BOLT,MACHINE
NSN, MFG P/N
5306008942381
NSN
5306-00-894-2381
MFG
MTU DETROIT DIESEL INC. DIV MTU DETROIT DIESEL INC.
Description
FASTENER LENGTH: 3.875 INCHES NOMINAL
III END ITEM IDENTIFICATION: 2320-01-304-2277 AND 2320-01-304-2278 PLS (PALLETIZED LOADING SYSTEM)
NOMINAL THREAD DIAMETER: 0.375 INCHES
THREAD QUANTITY PER INCH: 24
Related Searches:
5121466
BOLT,MACHINE
NSN, MFG P/N
5306008942381
NSN
5306-00-894-2381
MFG
WILSON-GARNER COMPANY
Description
FASTENER LENGTH: 3.875 INCHES NOMINAL
III END ITEM IDENTIFICATION: 2320-01-304-2277 AND 2320-01-304-2278 PLS (PALLETIZED LOADING SYSTEM)
NOMINAL THREAD DIAMETER: 0.375 INCHES
THREAD QUANTITY PER INCH: 24
Related Searches:
PC5121466
BOLT,MACHINE
NSN, MFG P/N
5306008942381
NSN
5306-00-894-2381
MFG
POWER COMPONENTS DEUTSCHLAND GMBH
Description
FASTENER LENGTH: 3.875 INCHES NOMINAL
III END ITEM IDENTIFICATION: 2320-01-304-2277 AND 2320-01-304-2278 PLS (PALLETIZED LOADING SYSTEM)
NOMINAL THREAD DIAMETER: 0.375 INCHES
THREAD QUANTITY PER INCH: 24
Related Searches:
MS20074-08-26
BOLT,MACHINE
NSN, MFG P/N
5306008942539
NSN
5306-00-894-2539
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS20074-08-26
FASTENER LENGTH: 2.781 INCHES MINIMUM AND 2.828 INCHES MAXIMUM
FEATURES PROVIDED: FINISHED HEAD
GRIP LENGTH: 1.984 INCHES MINIMUM AND 2.016 INCHES MAXIMUM
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
HOLE CONFIGURATION STYLE: E5 HEXAGON LONGITUDINAL HOLE
HOLE DIAMETER: 0.070 INCHES NOMINAL
HOLE QUANTITY: 6
HOLE TYPE: DRILLED
MANUFACTURERS CODE: 96906
MATERIAL: STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4130 OR STEEL COMP 4037 OVERALL
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.500 INCHES
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.765 INCHES MINIMUM AND 0.834 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 13
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.741 INCHES MINIMUM AND 0.751 INCHES MAXIMUM
Related Searches:
NAS1223C16N
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306008942832
NSN
5306-00-894-2832
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 1.323 INCHES MINIMUM AND 1.353 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM
HARDNESS RATING: 248.0 BRINELL STANDARD MINIMUM AND 321.0 BRINELL STANDARD MAXIMUM OVERALL
HEAD HEIGHT: 0.110 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD STYLE: C2 UNDERCUT HEXAGON
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5735 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 140000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPECIAL FEATURES: WITH BUTTON TYPE ELEMENT IN THREADS FOR LOCKING FEATURE
SPECIFICATION/STANDARD DATA: 80205-NAS1223 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 63.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES MINIMUM AND 0.363 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM
Related Searches:
1462
BOLT,U
NSN, MFG P/N
5306008943418
NSN
5306-00-894-3418
MFG
COOPER POWER SYSTEMS INC
Description
DESIGN CONTROL REFERENCE: 28603
DISTANCE FROM INSIDE CENTER OF BEND TO BOLT END: 2.312 INCHES NOMINAL
INSIDE DISTANCE BETWEEN SHANKS: 1.375 INCHES NOMINAL
MANUFACTURERS CODE: 20117
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
STYLE DESIGNATOR: B30 ROUND BEND
SURFACE TREATMENT: ZINC OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.250 INCHES MINIMUM
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNC
Related Searches:
28603
BOLT,U
NSN, MFG P/N
5306008943418
NSN
5306-00-894-3418
MFG
HUBBARD AND COMPANY
Description
DESIGN CONTROL REFERENCE: 28603
DISTANCE FROM INSIDE CENTER OF BEND TO BOLT END: 2.312 INCHES NOMINAL
INSIDE DISTANCE BETWEEN SHANKS: 1.375 INCHES NOMINAL
MANUFACTURERS CODE: 20117
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
STYLE DESIGNATOR: B30 ROUND BEND
SURFACE TREATMENT: ZINC OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.250 INCHES MINIMUM
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNC
Related Searches:
4501
BOLT,U
NSN, MFG P/N
5306008943418
NSN
5306-00-894-3418
MFG
UTILITIES SERVICE CO SUB OF LEHIGH STRUCTURAL STEEL CO
Description
DESIGN CONTROL REFERENCE: 28603
DISTANCE FROM INSIDE CENTER OF BEND TO BOLT END: 2.312 INCHES NOMINAL
INSIDE DISTANCE BETWEEN SHANKS: 1.375 INCHES NOMINAL
MANUFACTURERS CODE: 20117
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
STYLE DESIGNATOR: B30 ROUND BEND
SURFACE TREATMENT: ZINC OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.250 INCHES MINIMUM
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNC
Related Searches:
NAS1004-3A
BOLT,MACHINE
NSN, MFG P/N
5306008943640
NSN
5306-00-894-3640
MFG
BOSCH REXROTH GMBH LOHMANN STOLTER OHT
Description
FASTENER LENGTH: 0.732 INCHES NOMINAL
FEATURES PROVIDED: FINISHED HEAD
GRIP LENGTH: 0.188 INCHES NOMINAL
HEAD HEIGHT: 0.156 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
HOLE CONFIGURATION STYLE: E5 HEXAGON LONGITUDINAL HOLE
HOLE DIAMETER: 0.046 INCHES NOMINAL
HOLE QUANTITY: 1
HOLE TYPE: DRILLED
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5732 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 140000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SPECIAL FEATURES: TENSILE STRENGTH AT ROOM TEMPERATURE
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.544 INCHES MINIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
Related Searches:
NAS1004-3H
BOLT,MACHINE
NSN, MFG P/N
5306008943640
NSN
5306-00-894-3640
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.732 INCHES NOMINAL
FEATURES PROVIDED: FINISHED HEAD
GRIP LENGTH: 0.188 INCHES NOMINAL
HEAD HEIGHT: 0.156 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
HOLE CONFIGURATION STYLE: E5 HEXAGON LONGITUDINAL HOLE
HOLE DIAMETER: 0.046 INCHES NOMINAL
HOLE QUANTITY: 1
HOLE TYPE: DRILLED
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5732 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 140000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SPECIAL FEATURES: TENSILE STRENGTH AT ROOM TEMPERATURE
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.544 INCHES MINIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
Related Searches:
NAS2905-4W
BOLT,SHEAR
NSN, MFG P/N
5306008944063
NSN
5306-00-894-4063
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.704 INCHES MINIMUM AND 0.734 INCHES MAXIMUM
GRIP DIAMETER: 0.3266 INCHES MINIMUM AND 0.3276 INCHES MAXIMUM
GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.156 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS2905 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
Related Searches:
NAS2905-5W
BOLT,SHEAR
NSN, MFG P/N
5306008944065
NSN
5306-00-894-4065
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.766 INCHES MINIMUM AND 0.796 INCHES MAXIMUM
GRIP DIAMETER: 0.3266 INCHES MINIMUM AND 0.3276 INCHES MAXIMUM
GRIP LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.156 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS2905 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
Related Searches:
NAS2905-6W
BOLT,SHEAR
NSN, MFG P/N
5306008944073
NSN
5306-00-894-4073
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.829 INCHES MINIMUM AND 0.859 INCHES MAXIMUM
GRIP DIAMETER: 0.3266 INCHES MINIMUM AND 0.3276 INCHES MAXIMUM
GRIP LENGTH: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.156 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS2905 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
Related Searches:
NAS1108-42D
BOLT,SHEAR
NSN, MFG P/N
5306008944884
NSN
5306-00-894-4884
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 2.930 INCHES MINIMUM AND 2.980 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 3.063 INCHES MINIMUM AND 3.093 INCHES MAXIMUM
GRIP DIAMETER: 0.4985 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM
GRIP LENGTH: 2.615 INCHES MINIMUM AND 2.635 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.250 INCHES MINIMUM AND 0.265 INCHES MAXIMUM
HEAD STYLE: C3 DISHED HEXAGON
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.500 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM FIRST HOLE
SPECIFICATION/STANDARD DATA: 80205-NAS1108 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.428 INCHES MINIMUM AND 0.478 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.741 INCHES MINIMUM AND 0.752 INCHES MAXIMUM