My Quote Request
5306-00-964-1353
20 Products
4S2801-5-11
BOLT,SHEAR
NSN, MFG P/N
5306009641353
NSN
5306-00-964-1353
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
EXTENDED WASHER DIAMETER: 0.521 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.082 INCHES NOMINAL
FASTENER LENGTH: 1.299 INCHES NOMINAL
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.688 INCHES NOMINAL
HEAD HEIGHT: 0.348 INCHES NOMINAL
HEAD STYLE: C10 DOUBLE HEXAGON W/HOLE
MATERIAL: STEEL OVERALL
MINIMUM TENSILE STRENGTH: 180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: HEX HOLE IN POINT 0.156 IN. MIN DIA,0.158 IN. MAX DIA
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.611 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM
Related Searches:
51B464-5-1
BOLT,SHEAR
NSN, MFG P/N
5306009641211
NSN
5306-00-964-1211
MFG
NORTHROP GRUMMAN TECHNICAL SERVICES INC.
Description
FASTENER LENGTH: 0.438 INCHES NOMINAL
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.062 INCHES NOMINAL
HEAD HEIGHT: 0.151 INCHES MINIMUM AND 0.171 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIFICATION/STANDARD DATA: 76823-51B464 MANUFACTURERS STANDARD
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.376 INCHES MINIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.490 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
Related Searches:
559817
BOLT,MACHINE
NSN, MFG P/N
5306009641213
NSN
5306-00-964-1213
MFG
UNITED TECHNOLOGIES CORPORATION DBA PRATT & WHITNEY DIV SPARES/SUPPORT EQUIPMENT
Description
DESIGN CONTROL REFERENCE: 559817
FASTENER LENGTH: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
FEATURES PROVIDED: UNFINISHED HEAD
HEAD HEIGHT: 0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
HOLE CONFIGURATION STYLE: E6 HEXAGON FLATS
HOLE DIAMETER: 0.047 INCHES NOMINAL
HOLE QUANTITY: 1
HOLE TYPE: DRILLED
III PRECIOUS MATERIAL: SILVER
MANUFACTURERS CODE: 77445
MATERIAL: STEEL CORROSION RESISTING OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 7477 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE FINISH: 63.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: SILVER OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS 2410 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.303 INCHES MINIMUM AND 0.323 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM
Related Searches:
559817
BOLT,MACHINE
NSN, MFG P/N
5306009641213
NSN
5306-00-964-1213
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
DESIGN CONTROL REFERENCE: 559817
FASTENER LENGTH: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
FEATURES PROVIDED: UNFINISHED HEAD
HEAD HEIGHT: 0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
HOLE CONFIGURATION STYLE: E6 HEXAGON FLATS
HOLE DIAMETER: 0.047 INCHES NOMINAL
HOLE QUANTITY: 1
HOLE TYPE: DRILLED
III PRECIOUS MATERIAL: SILVER
MANUFACTURERS CODE: 77445
MATERIAL: STEEL CORROSION RESISTING OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 7477 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE FINISH: 63.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: SILVER OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS 2410 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.303 INCHES MINIMUM AND 0.323 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM
Related Searches:
559817
BOLT,MACHINE
NSN, MFG P/N
5306009641213
NSN
5306-00-964-1213
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
DESIGN CONTROL REFERENCE: 559817
FASTENER LENGTH: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
FEATURES PROVIDED: UNFINISHED HEAD
HEAD HEIGHT: 0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
HOLE CONFIGURATION STYLE: E6 HEXAGON FLATS
HOLE DIAMETER: 0.047 INCHES NOMINAL
HOLE QUANTITY: 1
HOLE TYPE: DRILLED
III PRECIOUS MATERIAL: SILVER
MANUFACTURERS CODE: 77445
MATERIAL: STEEL CORROSION RESISTING OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 7477 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE FINISH: 63.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: SILVER OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS 2410 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.303 INCHES MINIMUM AND 0.323 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM
Related Searches:
559817
BOLT,MACHINE
NSN, MFG P/N
5306009641213
NSN
5306-00-964-1213
MFG
TEXTRON FASTENING SYSTEMS DBA DECORAH OPERATIONS TFS
Description
DESIGN CONTROL REFERENCE: 559817
FASTENER LENGTH: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
FEATURES PROVIDED: UNFINISHED HEAD
HEAD HEIGHT: 0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
HOLE CONFIGURATION STYLE: E6 HEXAGON FLATS
HOLE DIAMETER: 0.047 INCHES NOMINAL
HOLE QUANTITY: 1
HOLE TYPE: DRILLED
III PRECIOUS MATERIAL: SILVER
MANUFACTURERS CODE: 77445
MATERIAL: STEEL CORROSION RESISTING OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 7477 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE FINISH: 63.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: SILVER OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS 2410 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.303 INCHES MINIMUM AND 0.323 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM
Related Searches:
559817
BOLT,MACHINE
NSN, MFG P/N
5306009641213
NSN
5306-00-964-1213
MFG
SPS TECHNOLOGIES LLC DBA AIR INDUSTRIES
Description
DESIGN CONTROL REFERENCE: 559817
FASTENER LENGTH: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
FEATURES PROVIDED: UNFINISHED HEAD
HEAD HEIGHT: 0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
HOLE CONFIGURATION STYLE: E6 HEXAGON FLATS
HOLE DIAMETER: 0.047 INCHES NOMINAL
HOLE QUANTITY: 1
HOLE TYPE: DRILLED
III PRECIOUS MATERIAL: SILVER
MANUFACTURERS CODE: 77445
MATERIAL: STEEL CORROSION RESISTING OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 7477 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE FINISH: 63.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: SILVER OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS 2410 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.303 INCHES MINIMUM AND 0.323 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM
Related Searches:
GYS9-103
BOLT,MACHINE
NSN, MFG P/N
5306009641214
NSN
5306-00-964-1214
MFG
MEGGITT AIRCRAFT BRAKING SYSTEMS CORPORATION DBA MABS
Description
DESIGN CONTROL REFERENCE: GYS9-103
FASTENER LENGTH: 7.277 INCHES NOMINAL
FEATURES PROVIDED: FINISHED HEAD
GRIP LENGTH: 6.437 INCHES NOMINAL
HEAD HEIGHT: 0.281 INCHES NOMINAL
HEAD STYLE: C3 DISHED HEXAGON
III END ITEM IDENTIFICATION: C141
MANUFACTURERS CODE: 0B9R9
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.562 INCHES
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.840 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.865 INCHES MINIMUM AND 0.877 INCHES MAXIMUM
Related Searches:
GYS9-103
BOLT,MACHINE
NSN, MFG P/N
5306009641214
NSN
5306-00-964-1214
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
DESIGN CONTROL REFERENCE: GYS9-103
FASTENER LENGTH: 7.277 INCHES NOMINAL
FEATURES PROVIDED: FINISHED HEAD
GRIP LENGTH: 6.437 INCHES NOMINAL
HEAD HEIGHT: 0.281 INCHES NOMINAL
HEAD STYLE: C3 DISHED HEXAGON
III END ITEM IDENTIFICATION: C141
MANUFACTURERS CODE: 0B9R9
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.562 INCHES
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.840 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.865 INCHES MINIMUM AND 0.877 INCHES MAXIMUM
Related Searches:
GYS9-103
BOLT,MACHINE
NSN, MFG P/N
5306009641214
NSN
5306-00-964-1214
MFG
GOODYEAR TIRE AND RUBBER CO THE
Description
DESIGN CONTROL REFERENCE: GYS9-103
FASTENER LENGTH: 7.277 INCHES NOMINAL
FEATURES PROVIDED: FINISHED HEAD
GRIP LENGTH: 6.437 INCHES NOMINAL
HEAD HEIGHT: 0.281 INCHES NOMINAL
HEAD STYLE: C3 DISHED HEXAGON
III END ITEM IDENTIFICATION: C141
MANUFACTURERS CODE: 0B9R9
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.562 INCHES
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.840 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.865 INCHES MINIMUM AND 0.877 INCHES MAXIMUM
Related Searches:
GYS9-103
BOLT,MACHINE
NSN, MFG P/N
5306009641214
NSN
5306-00-964-1214
MFG
VALLEY-TODECO INC.
Description
DESIGN CONTROL REFERENCE: GYS9-103
FASTENER LENGTH: 7.277 INCHES NOMINAL
FEATURES PROVIDED: FINISHED HEAD
GRIP LENGTH: 6.437 INCHES NOMINAL
HEAD HEIGHT: 0.281 INCHES NOMINAL
HEAD STYLE: C3 DISHED HEXAGON
III END ITEM IDENTIFICATION: C141
MANUFACTURERS CODE: 0B9R9
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.562 INCHES
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.840 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.865 INCHES MINIMUM AND 0.877 INCHES MAXIMUM
Related Searches:
GYS9-103
BOLT,MACHINE
NSN, MFG P/N
5306009641214
NSN
5306-00-964-1214
MFG
SPS TECHNOLOGIES INC
Description
DESIGN CONTROL REFERENCE: GYS9-103
FASTENER LENGTH: 7.277 INCHES NOMINAL
FEATURES PROVIDED: FINISHED HEAD
GRIP LENGTH: 6.437 INCHES NOMINAL
HEAD HEIGHT: 0.281 INCHES NOMINAL
HEAD STYLE: C3 DISHED HEXAGON
III END ITEM IDENTIFICATION: C141
MANUFACTURERS CODE: 0B9R9
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.562 INCHES
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.840 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.865 INCHES MINIMUM AND 0.877 INCHES MAXIMUM
Related Searches:
2-43225-1
BOLT,SHOULDER
NSN, MFG P/N
5306009641334
NSN
5306-00-964-1334
MFG
NORTHROP GRUMMAN TECHNICAL SERVICES INC.
Description
DESIGN CONTROL REFERENCE: 2-43225-1
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 0.334 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH: 1.886 INCHES NOMINAL
HEAD HEIGHT: 0.139 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 0JRC1
MATERIAL: STEEL COMP 4130 OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.095 INCHES NOMINAL FIRST HOLE
SHOULDER DIAMETER: 0.250 INCHES NOMINAL FIRST SHOULDER
SHOULDER LENGTH: 0.672 INCHES NOMINAL FIRST SHOULDER
SHOULDER SHAPE: ROUND FIRST SHOULDER
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.124 INCHES MINIMUM AND 1.214 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.500 INCHES NOMINAL
Related Searches:
2-43225-1
BOLT,SHOULDER
NSN, MFG P/N
5306009641334
NSN
5306-00-964-1334
MFG
NORTHROP GRUMMAN SYSTEMS CORPORATION DIV INTEGRATED SYSTEMS SECTOR
Description
DESIGN CONTROL REFERENCE: 2-43225-1
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 0.334 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH: 1.886 INCHES NOMINAL
HEAD HEIGHT: 0.139 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 0JRC1
MATERIAL: STEEL COMP 4130 OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.095 INCHES NOMINAL FIRST HOLE
SHOULDER DIAMETER: 0.250 INCHES NOMINAL FIRST SHOULDER
SHOULDER LENGTH: 0.672 INCHES NOMINAL FIRST SHOULDER
SHOULDER SHAPE: ROUND FIRST SHOULDER
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.124 INCHES MINIMUM AND 1.214 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.500 INCHES NOMINAL
Related Searches:
63C10773
BOLT,EYE
NSN, MFG P/N
5306009641338
NSN
5306-00-964-1338
MFG
U S ARMY ARMAMENT RESEARCH & DEVELOPMENT COMMAND
Description
DESIGN CONTROL REFERENCE: 63C10773
EYE OUTSIDE WIDTH: 0.880 INCHES NOMINAL
EYE STOCK DIAMETER: 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HARDNESS RATING: 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
MANUFACTURERS CODE: 19200
MATERIAL: STEEL COMP 630 OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
OVERALL LENGTH: 2.730 INCHES MINIMUM AND 2.770 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.190 INCHES MINIMUM AND 1.310 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
Related Searches:
63C10773
BOLT,EYE
NSN, MFG P/N
5306009641338
NSN
5306-00-964-1338
MFG
SPRINGFIELD ARMORY
Description
DESIGN CONTROL REFERENCE: 63C10773
EYE OUTSIDE WIDTH: 0.880 INCHES NOMINAL
EYE STOCK DIAMETER: 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HARDNESS RATING: 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
MANUFACTURERS CODE: 19200
MATERIAL: STEEL COMP 630 OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
OVERALL LENGTH: 2.730 INCHES MINIMUM AND 2.770 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.190 INCHES MINIMUM AND 1.310 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
Related Searches:
63357-05-11
BOLT,SHEAR
NSN, MFG P/N
5306009641353
NSN
5306-00-964-1353
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
EXTENDED WASHER DIAMETER: 0.521 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.082 INCHES NOMINAL
FASTENER LENGTH: 1.299 INCHES NOMINAL
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.688 INCHES NOMINAL
HEAD HEIGHT: 0.348 INCHES NOMINAL
HEAD STYLE: C10 DOUBLE HEXAGON W/HOLE
MATERIAL: STEEL OVERALL
MINIMUM TENSILE STRENGTH: 180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: HEX HOLE IN POINT 0.156 IN. MIN DIA,0.158 IN. MAX DIA
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.611 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM
Related Searches:
AIC585-05-11
BOLT,SHEAR
NSN, MFG P/N
5306009641353
NSN
5306-00-964-1353
MFG
SPS TECHNOLOGIES LLC DBA AIR INDUSTRIES
Description
EXTENDED WASHER DIAMETER: 0.521 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.082 INCHES NOMINAL
FASTENER LENGTH: 1.299 INCHES NOMINAL
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.688 INCHES NOMINAL
HEAD HEIGHT: 0.348 INCHES NOMINAL
HEAD STYLE: C10 DOUBLE HEXAGON W/HOLE
MATERIAL: STEEL OVERALL
MINIMUM TENSILE STRENGTH: 180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: HEX HOLE IN POINT 0.156 IN. MIN DIA,0.158 IN. MAX DIA
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.611 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM
Related Searches:
BM7025-5-11
BOLT,SHEAR
NSN, MFG P/N
5306009641353
NSN
5306-00-964-1353
MFG
HUCK INTL INC
Description
EXTENDED WASHER DIAMETER: 0.521 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.082 INCHES NOMINAL
FASTENER LENGTH: 1.299 INCHES NOMINAL
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.688 INCHES NOMINAL
HEAD HEIGHT: 0.348 INCHES NOMINAL
HEAD STYLE: C10 DOUBLE HEXAGON W/HOLE
MATERIAL: STEEL OVERALL
MINIMUM TENSILE STRENGTH: 180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: HEX HOLE IN POINT 0.156 IN. MIN DIA,0.158 IN. MAX DIA
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.611 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM
Related Searches:
BM7025-5-11
BOLT,SHEAR
NSN, MFG P/N
5306009641353
NSN
5306-00-964-1353
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS
Description
EXTENDED WASHER DIAMETER: 0.521 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.082 INCHES NOMINAL
FASTENER LENGTH: 1.299 INCHES NOMINAL
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.688 INCHES NOMINAL
HEAD HEIGHT: 0.348 INCHES NOMINAL
HEAD STYLE: C10 DOUBLE HEXAGON W/HOLE
MATERIAL: STEEL OVERALL
MINIMUM TENSILE STRENGTH: 180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: HEX HOLE IN POINT 0.156 IN. MIN DIA,0.158 IN. MAX DIA
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.611 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM