My Quote Request
5306-01-174-0529
20 Products
122895-5D24
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306011740529
NSN
5306-01-174-0529
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.747 INCHES MINIMUM AND 1.777 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM
HEAD HEIGHT: 0.187 INCHES NOMINAL
HEAD STYLE: C12 SPLINE DRIVE SHEAR HEAD
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.355 INCHES MINIMUM AND 0.395 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.514 INCHES MINIMUM AND 0.521 INCHES MAXIMUM
Related Searches:
000933008154
BOLT,MACHINE
NSN, MFG P/N
5306011740376
NSN
5306-01-174-0376
MFG
DAIMLER AG
Description
BOLT,MACHINE
Related Searches:
4536226-895
BOLT,MACHINE
NSN, MFG P/N
5306011740376
NSN
5306-01-174-0376
MFG
BAE SYSTEMS HAGGLUNDS AB
Description
BOLT,MACHINE
Related Searches:
92585-991
BOLT,MACHINE
NSN, MFG P/N
5306011740376
NSN
5306-01-174-0376
MFG
U.S. DEFENSE SERVICES INC. DBA USDS
Description
BOLT,MACHINE
Related Searches:
4537651-001
BOLT,MACHINE
NSN, MFG P/N
5306011740379
NSN
5306-01-174-0379
MFG
BAE SYSTEMS HAGGLUNDS AB
Description
BOLT,MACHINE
Related Searches:
93076-991
BOLT,MACHINE
NSN, MFG P/N
5306011740379
NSN
5306-01-174-0379
MFG
U.S. DEFENSE SERVICES INC. DBA USDS
Description
BOLT,MACHINE
Related Searches:
F3850-008301
BOLT,MACHINE
NSN, MFG P/N
5306011740379
NSN
5306-01-174-0379
MFG
FORSVARETS MATERIELVERK DEFENCE MATERIEL ADMINISTRATION
Description
BOLT,MACHINE
Related Searches:
81010131
BOLT,MACHINE
NSN, MFG P/N
5306011740508
NSN
5306-01-174-0508
MFG
CATERPILLAR PAVING PRODUCTS INC
Description
FASTENER LENGTH: 1.750 INCHES NOMINAL
FEATURES PROVIDED: FINISHED HEAD
HEAD HEIGHT: 0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.875 INCHES NOMINAL
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
Related Searches:
95862-175
BOLT,MACHINE
NSN, MFG P/N
5306011740508
NSN
5306-01-174-0508
MFG
EATON CORPORATION DIV EATON FLUID POWER
Description
FASTENER LENGTH: 1.750 INCHES NOMINAL
FEATURES PROVIDED: FINISHED HEAD
HEAD HEIGHT: 0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.875 INCHES NOMINAL
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
Related Searches:
51599AX
BOLT,EYE
NSN, MFG P/N
5306011740509
NSN
5306-01-174-0509
MFG
OSHKOSH CORPORATION
Description
BOLT,EYE
Related Searches:
7-099-000495
BOLT,U
NSN, MFG P/N
5306011740514
NSN
5306-01-174-0514
MFG
GROVE U.S. L.L.C
Description
DISTANCE FROM INSIDE CENTER OF BEND TO BOLT END: 7.000 INCHES NOMINAL
INSIDE DISTANCE BETWEEN SHANKS: 4.188 INCHES NOMINAL
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: A6-829-005260,FSCM 29372 MFR REF ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER: 0.625 INCHES
STYLE DESIGNATOR: B31 SQUARE BEND
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 2.000 INCHES NOMINAL
THREAD QUANTITY PER INCH: 11
THREAD SERIES DESIGNATOR: UNRC
Related Searches:
12009224
BOLT,INTERNAL WRENCHING
NSN, MFG P/N
5306011740515
NSN
5306-01-174-0515
MFG
U S ARMY ARMAMENT RESEARCH & DEVELOPMENT COMMAND
Description
DESIGN CONTROL REFERENCE: 12009224
FASTENER LENGTH: 1.120 INCHES NOMINAL
HEAD DIAMETER: 0.375 INCHES NOMINAL
HEAD HEIGHT: 0.250 INCHES NOMINAL
HEAD STYLE: C47 FLUSH
III END ITEM IDENTIFICATION: M12008000
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 19200
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: FF-S-86 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-81562A,TY 1 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.750 INCHES NOMINAL
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNRC
WIDTH ACROSS FLATS: 0.187 INCHES NOMINAL
Related Searches:
2245169-2
BOLT,MACHINE
NSN, MFG P/N
5306011740516
NSN
5306-01-174-0516
MFG
NAVAL SEA SYSTEMS COMMAND
Description
FASTENER LENGTH: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
FEATURES PROVIDED: FINISHED HEAD
HARDNESS RATING: 25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
LOCKING FEATURE: PELLET THREADS
MATERIAL: STEEL OVERALL
MINIMUM TENSILE STRENGTH: 120000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.580 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 16
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.5510 INCHES MINIMUM AND 0.5625 INCHES MAXIMUM
Related Searches:
2245169-2
BOLT,MACHINE
NSN, MFG P/N
5306011740516
NSN
5306-01-174-0516
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
FASTENER LENGTH: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
FEATURES PROVIDED: FINISHED HEAD
HARDNESS RATING: 25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
LOCKING FEATURE: PELLET THREADS
MATERIAL: STEEL OVERALL
MINIMUM TENSILE STRENGTH: 120000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.580 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 16
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.5510 INCHES MINIMUM AND 0.5625 INCHES MAXIMUM
Related Searches:
AIC687-5D24
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306011740529
NSN
5306-01-174-0529
MFG
SPS TECHNOLOGIES LLC DBA AIR INDUSTRIES
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.747 INCHES MINIMUM AND 1.777 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM
HEAD HEIGHT: 0.187 INCHES NOMINAL
HEAD STYLE: C12 SPLINE DRIVE SHEAR HEAD
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.355 INCHES MINIMUM AND 0.395 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.514 INCHES MINIMUM AND 0.521 INCHES MAXIMUM
Related Searches:
MB154-5D24
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306011740529
NSN
5306-01-174-0529
MFG
HI-SHEAR CORPORATION
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.747 INCHES MINIMUM AND 1.777 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM
HEAD HEIGHT: 0.187 INCHES NOMINAL
HEAD STYLE: C12 SPLINE DRIVE SHEAR HEAD
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.355 INCHES MINIMUM AND 0.395 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.514 INCHES MINIMUM AND 0.521 INCHES MAXIMUM
Related Searches:
PBF1265-5D24
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306011740529
NSN
5306-01-174-0529
MFG
PAUL R. BRILES INC. DBA PB FASTENERS
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.747 INCHES MINIMUM AND 1.777 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM
HEAD HEIGHT: 0.187 INCHES NOMINAL
HEAD STYLE: C12 SPLINE DRIVE SHEAR HEAD
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.355 INCHES MINIMUM AND 0.395 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.514 INCHES MINIMUM AND 0.521 INCHES MAXIMUM
Related Searches:
S406-5D24
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306011740529
NSN
5306-01-174-0529
MFG
HUCK INTL INC
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.747 INCHES MINIMUM AND 1.777 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM
HEAD HEIGHT: 0.187 INCHES NOMINAL
HEAD STYLE: C12 SPLINE DRIVE SHEAR HEAD
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.355 INCHES MINIMUM AND 0.395 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.514 INCHES MINIMUM AND 0.521 INCHES MAXIMUM
Related Searches:
ST3M744
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306011740529
NSN
5306-01-174-0529
MFG
BOEING COMPANY THE DBA BOEING
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.747 INCHES MINIMUM AND 1.777 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM
HEAD HEIGHT: 0.187 INCHES NOMINAL
HEAD STYLE: C12 SPLINE DRIVE SHEAR HEAD
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.355 INCHES MINIMUM AND 0.395 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.514 INCHES MINIMUM AND 0.521 INCHES MAXIMUM
Related Searches:
ST3M744-5D24
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306011740529
NSN
5306-01-174-0529
MFG
HEARTLAND PRECISION FASTENERS INC.
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.747 INCHES MINIMUM AND 1.777 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM
HEAD HEIGHT: 0.187 INCHES NOMINAL
HEAD STYLE: C12 SPLINE DRIVE SHEAR HEAD
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.355 INCHES MINIMUM AND 0.395 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.514 INCHES MINIMUM AND 0.521 INCHES MAXIMUM