My Quote Request
5306-01-195-5055
20 Products
122896-14D69
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306011955055
NSN
5306-01-195-5055
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 5.191 INCHES MINIMUM AND 5.268 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 5.335 INCHES MINIMUM AND 5.402 INCHES MAXIMUM
GRIP DIAMETER: 0.8735 INCHES MINIMUM AND 0.8740 INCHES MAXIMUM
GRIP LENGTH: 4.302 INCHES MINIMUM AND 4.322 INCHES MAXIMUM
HEAD HEIGHT: 0.468 INCHES NOMINAL
HEAD MINOR DIAMETER: 1.298 INCHES NOMINAL
HEAD STYLE: C12 SPLINE DRIVE SHEAR HEAD
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.875 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.141 INCHES MINIMUM AND 0.146 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.013 INCHES MINIMUM AND 1.100 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 14
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
MB156-7H25
BOLT,SHEAR
NSN, MFG P/N
5306011955032
NSN
5306-01-195-5032
MFG
HI-SHEAR CORPORATION
Description
EXTENDED WASHER DIAMETER: 0.807 INCHES MINIMUM AND 0.817 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM
FASTENER LENGTH: 2.252 INCHES MINIMUM AND 2.282 INCHES MAXIMUM
GRIP DIAMETER: 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
GRIP LENGTH: 1.552 INCHES MINIMUM AND 1.572 INCHES MAXIMUM
HEAD HEIGHT: 0.310 INCHES MINIMUM AND 0.350 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.514 INCHES MINIMUM AND 0.521 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
HOLE CONFIGURATION STYLE: E18 SPLINE
HOLE DIAMETER: 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM
HOLE QUANTITY: 4
HOLE TYPE: DRILLED
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.437 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.680 INCHES MINIMUM AND 0.730 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
PBF1267-7H25
BOLT,SHEAR
NSN, MFG P/N
5306011955032
NSN
5306-01-195-5032
MFG
PAUL R. BRILES INC. DBA PB FASTENERS
Description
EXTENDED WASHER DIAMETER: 0.807 INCHES MINIMUM AND 0.817 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM
FASTENER LENGTH: 2.252 INCHES MINIMUM AND 2.282 INCHES MAXIMUM
GRIP DIAMETER: 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
GRIP LENGTH: 1.552 INCHES MINIMUM AND 1.572 INCHES MAXIMUM
HEAD HEIGHT: 0.310 INCHES MINIMUM AND 0.350 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.514 INCHES MINIMUM AND 0.521 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
HOLE CONFIGURATION STYLE: E18 SPLINE
HOLE DIAMETER: 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM
HOLE QUANTITY: 4
HOLE TYPE: DRILLED
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.437 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.680 INCHES MINIMUM AND 0.730 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
S343-7H25
BOLT,SHEAR
NSN, MFG P/N
5306011955032
NSN
5306-01-195-5032
MFG
HUCK INTL INC
Description
EXTENDED WASHER DIAMETER: 0.807 INCHES MINIMUM AND 0.817 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM
FASTENER LENGTH: 2.252 INCHES MINIMUM AND 2.282 INCHES MAXIMUM
GRIP DIAMETER: 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
GRIP LENGTH: 1.552 INCHES MINIMUM AND 1.572 INCHES MAXIMUM
HEAD HEIGHT: 0.310 INCHES MINIMUM AND 0.350 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.514 INCHES MINIMUM AND 0.521 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
HOLE CONFIGURATION STYLE: E18 SPLINE
HOLE DIAMETER: 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM
HOLE QUANTITY: 4
HOLE TYPE: DRILLED
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.437 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.680 INCHES MINIMUM AND 0.730 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
S343-7H25
BOLT,SHEAR
NSN, MFG P/N
5306011955032
NSN
5306-01-195-5032
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS
Description
EXTENDED WASHER DIAMETER: 0.807 INCHES MINIMUM AND 0.817 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM
FASTENER LENGTH: 2.252 INCHES MINIMUM AND 2.282 INCHES MAXIMUM
GRIP DIAMETER: 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
GRIP LENGTH: 1.552 INCHES MINIMUM AND 1.572 INCHES MAXIMUM
HEAD HEIGHT: 0.310 INCHES MINIMUM AND 0.350 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.514 INCHES MINIMUM AND 0.521 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
HOLE CONFIGURATION STYLE: E18 SPLINE
HOLE DIAMETER: 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM
HOLE QUANTITY: 4
HOLE TYPE: DRILLED
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.437 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.680 INCHES MINIMUM AND 0.730 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
ST3M753-7H25
BOLT,SHEAR
NSN, MFG P/N
5306011955032
NSN
5306-01-195-5032
MFG
BOEING COMPANY THE DBA BOEING
Description
EXTENDED WASHER DIAMETER: 0.807 INCHES MINIMUM AND 0.817 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM
FASTENER LENGTH: 2.252 INCHES MINIMUM AND 2.282 INCHES MAXIMUM
GRIP DIAMETER: 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
GRIP LENGTH: 1.552 INCHES MINIMUM AND 1.572 INCHES MAXIMUM
HEAD HEIGHT: 0.310 INCHES MINIMUM AND 0.350 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.514 INCHES MINIMUM AND 0.521 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
HOLE CONFIGURATION STYLE: E18 SPLINE
HOLE DIAMETER: 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM
HOLE QUANTITY: 4
HOLE TYPE: DRILLED
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.437 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.680 INCHES MINIMUM AND 0.730 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
ST3M753-7H25
BOLT,SHEAR
NSN, MFG P/N
5306011955032
NSN
5306-01-195-5032
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
EXTENDED WASHER DIAMETER: 0.807 INCHES MINIMUM AND 0.817 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM
FASTENER LENGTH: 2.252 INCHES MINIMUM AND 2.282 INCHES MAXIMUM
GRIP DIAMETER: 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
GRIP LENGTH: 1.552 INCHES MINIMUM AND 1.572 INCHES MAXIMUM
HEAD HEIGHT: 0.310 INCHES MINIMUM AND 0.350 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.514 INCHES MINIMUM AND 0.521 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
HOLE CONFIGURATION STYLE: E18 SPLINE
HOLE DIAMETER: 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM
HOLE QUANTITY: 4
HOLE TYPE: DRILLED
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.437 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.680 INCHES MINIMUM AND 0.730 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
VFK600-7H25
BOLT,SHEAR
NSN, MFG P/N
5306011955032
NSN
5306-01-195-5032
MFG
VALLEY-TODECO INC.
Description
EXTENDED WASHER DIAMETER: 0.807 INCHES MINIMUM AND 0.817 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM
FASTENER LENGTH: 2.252 INCHES MINIMUM AND 2.282 INCHES MAXIMUM
GRIP DIAMETER: 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
GRIP LENGTH: 1.552 INCHES MINIMUM AND 1.572 INCHES MAXIMUM
HEAD HEIGHT: 0.310 INCHES MINIMUM AND 0.350 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.514 INCHES MINIMUM AND 0.521 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
HOLE CONFIGURATION STYLE: E18 SPLINE
HOLE DIAMETER: 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM
HOLE QUANTITY: 4
HOLE TYPE: DRILLED
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.437 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.680 INCHES MINIMUM AND 0.730 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
VS3190-7H25
BOLT,SHEAR
NSN, MFG P/N
5306011955032
NSN
5306-01-195-5032
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
EXTENDED WASHER DIAMETER: 0.807 INCHES MINIMUM AND 0.817 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM
FASTENER LENGTH: 2.252 INCHES MINIMUM AND 2.282 INCHES MAXIMUM
GRIP DIAMETER: 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
GRIP LENGTH: 1.552 INCHES MINIMUM AND 1.572 INCHES MAXIMUM
HEAD HEIGHT: 0.310 INCHES MINIMUM AND 0.350 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.514 INCHES MINIMUM AND 0.521 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
HOLE CONFIGURATION STYLE: E18 SPLINE
HOLE DIAMETER: 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM
HOLE QUANTITY: 4
HOLE TYPE: DRILLED
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.437 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.680 INCHES MINIMUM AND 0.730 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
VS3190-7H25
BOLT,SHEAR
NSN, MFG P/N
5306011955032
NSN
5306-01-195-5032
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
EXTENDED WASHER DIAMETER: 0.807 INCHES MINIMUM AND 0.817 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM
FASTENER LENGTH: 2.252 INCHES MINIMUM AND 2.282 INCHES MAXIMUM
GRIP DIAMETER: 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
GRIP LENGTH: 1.552 INCHES MINIMUM AND 1.572 INCHES MAXIMUM
HEAD HEIGHT: 0.310 INCHES MINIMUM AND 0.350 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.514 INCHES MINIMUM AND 0.521 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
HOLE CONFIGURATION STYLE: E18 SPLINE
HOLE DIAMETER: 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM
HOLE QUANTITY: 4
HOLE TYPE: DRILLED
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.437 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.680 INCHES MINIMUM AND 0.730 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
122896-14D69
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306011955055
NSN
5306-01-195-5055
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 5.191 INCHES MINIMUM AND 5.268 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 5.335 INCHES MINIMUM AND 5.402 INCHES MAXIMUM
GRIP DIAMETER: 0.8735 INCHES MINIMUM AND 0.8740 INCHES MAXIMUM
GRIP LENGTH: 4.302 INCHES MINIMUM AND 4.322 INCHES MAXIMUM
HEAD HEIGHT: 0.468 INCHES NOMINAL
HEAD MINOR DIAMETER: 1.298 INCHES NOMINAL
HEAD STYLE: C12 SPLINE DRIVE SHEAR HEAD
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.875 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.141 INCHES MINIMUM AND 0.146 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.013 INCHES MINIMUM AND 1.100 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 14
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
AIC688-14D69
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306011955055
NSN
5306-01-195-5055
MFG
SPS TECHNOLOGIES LLC DBA AIR INDUSTRIES
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 5.191 INCHES MINIMUM AND 5.268 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 5.335 INCHES MINIMUM AND 5.402 INCHES MAXIMUM
GRIP DIAMETER: 0.8735 INCHES MINIMUM AND 0.8740 INCHES MAXIMUM
GRIP LENGTH: 4.302 INCHES MINIMUM AND 4.322 INCHES MAXIMUM
HEAD HEIGHT: 0.468 INCHES NOMINAL
HEAD MINOR DIAMETER: 1.298 INCHES NOMINAL
HEAD STYLE: C12 SPLINE DRIVE SHEAR HEAD
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.875 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.141 INCHES MINIMUM AND 0.146 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.013 INCHES MINIMUM AND 1.100 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 14
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
MB155-14D69
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306011955055
NSN
5306-01-195-5055
MFG
HI-SHEAR CORPORATION
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 5.191 INCHES MINIMUM AND 5.268 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 5.335 INCHES MINIMUM AND 5.402 INCHES MAXIMUM
GRIP DIAMETER: 0.8735 INCHES MINIMUM AND 0.8740 INCHES MAXIMUM
GRIP LENGTH: 4.302 INCHES MINIMUM AND 4.322 INCHES MAXIMUM
HEAD HEIGHT: 0.468 INCHES NOMINAL
HEAD MINOR DIAMETER: 1.298 INCHES NOMINAL
HEAD STYLE: C12 SPLINE DRIVE SHEAR HEAD
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.875 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.141 INCHES MINIMUM AND 0.146 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.013 INCHES MINIMUM AND 1.100 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 14
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
PBF1266-14D69
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306011955055
NSN
5306-01-195-5055
MFG
PAUL R. BRILES INC. DBA PB FASTENERS
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 5.191 INCHES MINIMUM AND 5.268 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 5.335 INCHES MINIMUM AND 5.402 INCHES MAXIMUM
GRIP DIAMETER: 0.8735 INCHES MINIMUM AND 0.8740 INCHES MAXIMUM
GRIP LENGTH: 4.302 INCHES MINIMUM AND 4.322 INCHES MAXIMUM
HEAD HEIGHT: 0.468 INCHES NOMINAL
HEAD MINOR DIAMETER: 1.298 INCHES NOMINAL
HEAD STYLE: C12 SPLINE DRIVE SHEAR HEAD
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.875 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.141 INCHES MINIMUM AND 0.146 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.013 INCHES MINIMUM AND 1.100 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 14
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
S397-14D69
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306011955055
NSN
5306-01-195-5055
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 5.191 INCHES MINIMUM AND 5.268 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 5.335 INCHES MINIMUM AND 5.402 INCHES MAXIMUM
GRIP DIAMETER: 0.8735 INCHES MINIMUM AND 0.8740 INCHES MAXIMUM
GRIP LENGTH: 4.302 INCHES MINIMUM AND 4.322 INCHES MAXIMUM
HEAD HEIGHT: 0.468 INCHES NOMINAL
HEAD MINOR DIAMETER: 1.298 INCHES NOMINAL
HEAD STYLE: C12 SPLINE DRIVE SHEAR HEAD
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.875 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.141 INCHES MINIMUM AND 0.146 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.013 INCHES MINIMUM AND 1.100 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 14
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
S397-14D69
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306011955055
NSN
5306-01-195-5055
MFG
HUCK INTL INC
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 5.191 INCHES MINIMUM AND 5.268 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 5.335 INCHES MINIMUM AND 5.402 INCHES MAXIMUM
GRIP DIAMETER: 0.8735 INCHES MINIMUM AND 0.8740 INCHES MAXIMUM
GRIP LENGTH: 4.302 INCHES MINIMUM AND 4.322 INCHES MAXIMUM
HEAD HEIGHT: 0.468 INCHES NOMINAL
HEAD MINOR DIAMETER: 1.298 INCHES NOMINAL
HEAD STYLE: C12 SPLINE DRIVE SHEAR HEAD
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.875 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.141 INCHES MINIMUM AND 0.146 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.013 INCHES MINIMUM AND 1.100 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 14
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
ST3M747-14D69
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306011955055
NSN
5306-01-195-5055
MFG
FASTENER INNOVATION TECHNOLOGY INC DBA F.I.T.
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 5.191 INCHES MINIMUM AND 5.268 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 5.335 INCHES MINIMUM AND 5.402 INCHES MAXIMUM
GRIP DIAMETER: 0.8735 INCHES MINIMUM AND 0.8740 INCHES MAXIMUM
GRIP LENGTH: 4.302 INCHES MINIMUM AND 4.322 INCHES MAXIMUM
HEAD HEIGHT: 0.468 INCHES NOMINAL
HEAD MINOR DIAMETER: 1.298 INCHES NOMINAL
HEAD STYLE: C12 SPLINE DRIVE SHEAR HEAD
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.875 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.141 INCHES MINIMUM AND 0.146 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.013 INCHES MINIMUM AND 1.100 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 14
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
ST3M747-14D69
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306011955055
NSN
5306-01-195-5055
MFG
BOEING COMPANY THE DBA BOEING
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 5.191 INCHES MINIMUM AND 5.268 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 5.335 INCHES MINIMUM AND 5.402 INCHES MAXIMUM
GRIP DIAMETER: 0.8735 INCHES MINIMUM AND 0.8740 INCHES MAXIMUM
GRIP LENGTH: 4.302 INCHES MINIMUM AND 4.322 INCHES MAXIMUM
HEAD HEIGHT: 0.468 INCHES NOMINAL
HEAD MINOR DIAMETER: 1.298 INCHES NOMINAL
HEAD STYLE: C12 SPLINE DRIVE SHEAR HEAD
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.875 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.141 INCHES MINIMUM AND 0.146 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.013 INCHES MINIMUM AND 1.100 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 14
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
VCG0002-14D69
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306011955055
NSN
5306-01-195-5055
MFG
VALLEY-TODECO INC.
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 5.191 INCHES MINIMUM AND 5.268 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 5.335 INCHES MINIMUM AND 5.402 INCHES MAXIMUM
GRIP DIAMETER: 0.8735 INCHES MINIMUM AND 0.8740 INCHES MAXIMUM
GRIP LENGTH: 4.302 INCHES MINIMUM AND 4.322 INCHES MAXIMUM
HEAD HEIGHT: 0.468 INCHES NOMINAL
HEAD MINOR DIAMETER: 1.298 INCHES NOMINAL
HEAD STYLE: C12 SPLINE DRIVE SHEAR HEAD
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.875 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.141 INCHES MINIMUM AND 0.146 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.013 INCHES MINIMUM AND 1.100 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 14
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
VS3191-14369
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306011955055
NSN
5306-01-195-5055
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 5.191 INCHES MINIMUM AND 5.268 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 5.335 INCHES MINIMUM AND 5.402 INCHES MAXIMUM
GRIP DIAMETER: 0.8735 INCHES MINIMUM AND 0.8740 INCHES MAXIMUM
GRIP LENGTH: 4.302 INCHES MINIMUM AND 4.322 INCHES MAXIMUM
HEAD HEIGHT: 0.468 INCHES NOMINAL
HEAD MINOR DIAMETER: 1.298 INCHES NOMINAL
HEAD STYLE: C12 SPLINE DRIVE SHEAR HEAD
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.875 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.141 INCHES MINIMUM AND 0.146 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.013 INCHES MINIMUM AND 1.100 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 14
THREAD SERIES DESIGNATOR: UNJF