My Quote Request
5306-01-360-1762
20 Products
03A099-5-35
BOLT,SHEAR
NSN, MFG P/N
5306013601762
NSN
5306-01-360-1762
MFG
NORTHROP GRUMMAN SYSTEMS CORPORATION DIV INTEGRATED SYSTEMS SECTOR
Description
EXTENDED WASHER DIAMETER: 0.575 INCHES MINIMUM AND 0.585 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.035 INCHES MINIMUM AND 0.055 INCHES MAXIMUM
FASTENER LENGTH: 2.724 INCHES MINIMUM AND 2.754 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 2.115 INCHES MINIMUM AND 2.135 INCHES MAXIMUM
HEAD HEIGHT: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.383 INCHES MINIMUM AND 0.389 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5663 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.589 INCHES MINIMUM AND 0.639 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
8HA6
BOLT,MACHINE
NSN, MFG P/N
5306013601707
NSN
5306-01-360-1707
MFG
OSHKOSH CORPORATION
Description
BOLT,MACHINE
Related Searches:
8T-0644
BOLT,MACHINE
NSN, MFG P/N
5306013601708
NSN
5306-01-360-1708
MFG
CATERPILLAR INC. DBA CATERPILLAR DIV GOVERNMENTAL AND DEFENSE PRODUCTS
Description
FASTENER LENGTH: 90.0 MILLIMETERS NOMINAL
GRIP LENGTH: 64.0 MILLIMETERS NOMINAL
HEAD HEIGHT: 7.0 MILLIMETERS NOMINAL
HEAD STYLE: C1 HEXAGON
III END ITEM IDENTIFICATION: MRAP - COMMON NSN - USED ON 3 MRAP VARIANTS AND 13 OTHER WEAPON SYSTEMS
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT (M10X1.5X90-MM)
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 10.0 MILLIMETERS
SURFACE TREATMENT: OIL AND PHOSPHATE OVERALL
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 26.0 MILLIMETERS NOMINAL
THREAD PITCH IN MILLIMETERS: 1.50
THREAD SERIES DESIGNATOR: M
WIDTH BETWEEN FLATS: 16.0 MILLIMETERS NOMINAL
Related Searches:
6122735
BOLT,MACHINE
NSN, MFG P/N
5306013601760
NSN
5306-01-360-1760
MFG
NAVAL SEA SYSTEMS COMMAND
Description
FASTENER LENGTH: 1.952 INCHES NOMINAL
HEAD HEIGHT: 0.148 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.500 INCHES
SPECIAL FEATURES: APPLY ONE COAT PRIMER AND TWO COATS OF PAINT,FED-STD-595 COLOR NO. 26270,PER WS25381; DO NOT PRIME OR PAINT FROM FASTENER END TO 1.000 IN. OFF FASTENER END; THREADS UNDERCUT FOR RELIEF,0.4906 IN. DIA. MINUS 0.005 IN. X 0.167 IN. WIDE PORM 0.005 IN.
SURFACE TREATMENT: PASSIVATE OVERALL PAINT HEAD PAINT GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.355 INCHES NOMINAL
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.750 INCHES NOMINAL
Related Searches:
6122735
BOLT,MACHINE
NSN, MFG P/N
5306013601760
NSN
5306-01-360-1760
MFG
RAYTHEON COMPANY DBA RAYTHEON DIV MISSILE SYSTEMS
Description
FASTENER LENGTH: 1.952 INCHES NOMINAL
HEAD HEIGHT: 0.148 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.500 INCHES
SPECIAL FEATURES: APPLY ONE COAT PRIMER AND TWO COATS OF PAINT,FED-STD-595 COLOR NO. 26270,PER WS25381; DO NOT PRIME OR PAINT FROM FASTENER END TO 1.000 IN. OFF FASTENER END; THREADS UNDERCUT FOR RELIEF,0.4906 IN. DIA. MINUS 0.005 IN. X 0.167 IN. WIDE PORM 0.005 IN.
SURFACE TREATMENT: PASSIVATE OVERALL PAINT HEAD PAINT GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.355 INCHES NOMINAL
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.750 INCHES NOMINAL
Related Searches:
6122735
BOLT,MACHINE
NSN, MFG P/N
5306013601760
NSN
5306-01-360-1760
MFG
TRANSLANT INC A JOINT VENTURE
Description
FASTENER LENGTH: 1.952 INCHES NOMINAL
HEAD HEIGHT: 0.148 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.500 INCHES
SPECIAL FEATURES: APPLY ONE COAT PRIMER AND TWO COATS OF PAINT,FED-STD-595 COLOR NO. 26270,PER WS25381; DO NOT PRIME OR PAINT FROM FASTENER END TO 1.000 IN. OFF FASTENER END; THREADS UNDERCUT FOR RELIEF,0.4906 IN. DIA. MINUS 0.005 IN. X 0.167 IN. WIDE PORM 0.005 IN.
SURFACE TREATMENT: PASSIVATE OVERALL PAINT HEAD PAINT GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.355 INCHES NOMINAL
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.750 INCHES NOMINAL
Related Searches:
6620219
BOLT,MACHINE
NSN, MFG P/N
5306013601760
NSN
5306-01-360-1760
MFG
NAVAL SEA SYSTEMS COMMAND
Description
FASTENER LENGTH: 1.952 INCHES NOMINAL
HEAD HEIGHT: 0.148 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.500 INCHES
SPECIAL FEATURES: APPLY ONE COAT PRIMER AND TWO COATS OF PAINT,FED-STD-595 COLOR NO. 26270,PER WS25381; DO NOT PRIME OR PAINT FROM FASTENER END TO 1.000 IN. OFF FASTENER END; THREADS UNDERCUT FOR RELIEF,0.4906 IN. DIA. MINUS 0.005 IN. X 0.167 IN. WIDE PORM 0.005 IN.
SURFACE TREATMENT: PASSIVATE OVERALL PAINT HEAD PAINT GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.355 INCHES NOMINAL
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.750 INCHES NOMINAL
Related Searches:
520-071-10-62
BOLT,SHEAR
NSN, MFG P/N
5306013601761
NSN
5306-01-360-1761
MFG
BELL HELICOPTER TEXTRON INC.
Description
EXTENDED WASHER DIAMETER: 1.153 INCHES MINIMUM AND 1.163 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM
FASTENER LENGTH: 4.890 INCHES MINIMUM AND 4.920 INCHES MAXIMUM
GRIP DIAMETER: 0.6230 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM
GRIP LENGTH: 3.865 INCHES MINIMUM AND 3.885 INCHES MAXIMUM
HEAD HEIGHT: 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.774 INCHES MINIMUM AND 0.782 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5663 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.625 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.005 INCHES MINIMUM AND 1.055 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
MS14181-10062
BOLT,SHEAR
NSN, MFG P/N
5306013601761
NSN
5306-01-360-1761
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
EXTENDED WASHER DIAMETER: 1.153 INCHES MINIMUM AND 1.163 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM
FASTENER LENGTH: 4.890 INCHES MINIMUM AND 4.920 INCHES MAXIMUM
GRIP DIAMETER: 0.6230 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM
GRIP LENGTH: 3.865 INCHES MINIMUM AND 3.885 INCHES MAXIMUM
HEAD HEIGHT: 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.774 INCHES MINIMUM AND 0.782 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5663 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.625 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.005 INCHES MINIMUM AND 1.055 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
MS14181-10062
BOLT,SHEAR
NSN, MFG P/N
5306013601761
NSN
5306-01-360-1761
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
EXTENDED WASHER DIAMETER: 1.153 INCHES MINIMUM AND 1.163 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM
FASTENER LENGTH: 4.890 INCHES MINIMUM AND 4.920 INCHES MAXIMUM
GRIP DIAMETER: 0.6230 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM
GRIP LENGTH: 3.865 INCHES MINIMUM AND 3.885 INCHES MAXIMUM
HEAD HEIGHT: 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.774 INCHES MINIMUM AND 0.782 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5663 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.625 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.005 INCHES MINIMUM AND 1.055 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
123710-5-35
BOLT,SHEAR
NSN, MFG P/N
5306013601762
NSN
5306-01-360-1762
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
EXTENDED WASHER DIAMETER: 0.575 INCHES MINIMUM AND 0.585 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.035 INCHES MINIMUM AND 0.055 INCHES MAXIMUM
FASTENER LENGTH: 2.724 INCHES MINIMUM AND 2.754 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 2.115 INCHES MINIMUM AND 2.135 INCHES MAXIMUM
HEAD HEIGHT: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.383 INCHES MINIMUM AND 0.389 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5663 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.589 INCHES MINIMUM AND 0.639 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
20-071-5-34
BOLT,SHEAR
NSN, MFG P/N
5306013601762
NSN
5306-01-360-1762
MFG
BELL HELICOPTER TEXTRON INC.
Description
EXTENDED WASHER DIAMETER: 0.575 INCHES MINIMUM AND 0.585 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.035 INCHES MINIMUM AND 0.055 INCHES MAXIMUM
FASTENER LENGTH: 2.724 INCHES MINIMUM AND 2.754 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 2.115 INCHES MINIMUM AND 2.135 INCHES MAXIMUM
HEAD HEIGHT: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.383 INCHES MINIMUM AND 0.389 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5663 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.589 INCHES MINIMUM AND 0.639 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
AIC1654-5-35
BOLT,SHEAR
NSN, MFG P/N
5306013601762
NSN
5306-01-360-1762
MFG
SPS TECHNOLOGIES LLC DBA AIR INDUSTRIES
Description
EXTENDED WASHER DIAMETER: 0.575 INCHES MINIMUM AND 0.585 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.035 INCHES MINIMUM AND 0.055 INCHES MAXIMUM
FASTENER LENGTH: 2.724 INCHES MINIMUM AND 2.754 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 2.115 INCHES MINIMUM AND 2.135 INCHES MAXIMUM
HEAD HEIGHT: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.383 INCHES MINIMUM AND 0.389 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5663 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.589 INCHES MINIMUM AND 0.639 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
DF33004-5-35
BOLT,SHEAR
NSN, MFG P/N
5306013601762
NSN
5306-01-360-1762
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS
Description
EXTENDED WASHER DIAMETER: 0.575 INCHES MINIMUM AND 0.585 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.035 INCHES MINIMUM AND 0.055 INCHES MAXIMUM
FASTENER LENGTH: 2.724 INCHES MINIMUM AND 2.754 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 2.115 INCHES MINIMUM AND 2.135 INCHES MAXIMUM
HEAD HEIGHT: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.383 INCHES MINIMUM AND 0.389 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5663 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.589 INCHES MINIMUM AND 0.639 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
DF33004-5-35
BOLT,SHEAR
NSN, MFG P/N
5306013601762
NSN
5306-01-360-1762
MFG
HUCK INTL INC
Description
EXTENDED WASHER DIAMETER: 0.575 INCHES MINIMUM AND 0.585 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.035 INCHES MINIMUM AND 0.055 INCHES MAXIMUM
FASTENER LENGTH: 2.724 INCHES MINIMUM AND 2.754 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 2.115 INCHES MINIMUM AND 2.135 INCHES MAXIMUM
HEAD HEIGHT: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.383 INCHES MINIMUM AND 0.389 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5663 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.589 INCHES MINIMUM AND 0.639 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
MB210-5-35
BOLT,SHEAR
NSN, MFG P/N
5306013601762
NSN
5306-01-360-1762
MFG
HI-SHEAR CORPORATION
Description
EXTENDED WASHER DIAMETER: 0.575 INCHES MINIMUM AND 0.585 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.035 INCHES MINIMUM AND 0.055 INCHES MAXIMUM
FASTENER LENGTH: 2.724 INCHES MINIMUM AND 2.754 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 2.115 INCHES MINIMUM AND 2.135 INCHES MAXIMUM
HEAD HEIGHT: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.383 INCHES MINIMUM AND 0.389 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5663 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.589 INCHES MINIMUM AND 0.639 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
MS14181-05034
BOLT,SHEAR
NSN, MFG P/N
5306013601762
NSN
5306-01-360-1762
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
EXTENDED WASHER DIAMETER: 0.575 INCHES MINIMUM AND 0.585 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.035 INCHES MINIMUM AND 0.055 INCHES MAXIMUM
FASTENER LENGTH: 2.724 INCHES MINIMUM AND 2.754 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 2.115 INCHES MINIMUM AND 2.135 INCHES MAXIMUM
HEAD HEIGHT: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.383 INCHES MINIMUM AND 0.389 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5663 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.589 INCHES MINIMUM AND 0.639 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
MS14181-05034
BOLT,SHEAR
NSN, MFG P/N
5306013601762
NSN
5306-01-360-1762
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
EXTENDED WASHER DIAMETER: 0.575 INCHES MINIMUM AND 0.585 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.035 INCHES MINIMUM AND 0.055 INCHES MAXIMUM
FASTENER LENGTH: 2.724 INCHES MINIMUM AND 2.754 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 2.115 INCHES MINIMUM AND 2.135 INCHES MAXIMUM
HEAD HEIGHT: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.383 INCHES MINIMUM AND 0.389 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5663 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.589 INCHES MINIMUM AND 0.639 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
PBF1421-5-35
BOLT,SHEAR
NSN, MFG P/N
5306013601762
NSN
5306-01-360-1762
MFG
PAUL R. BRILES INC. DBA PB FASTENERS
Description
EXTENDED WASHER DIAMETER: 0.575 INCHES MINIMUM AND 0.585 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.035 INCHES MINIMUM AND 0.055 INCHES MAXIMUM
FASTENER LENGTH: 2.724 INCHES MINIMUM AND 2.754 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 2.115 INCHES MINIMUM AND 2.135 INCHES MAXIMUM
HEAD HEIGHT: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.383 INCHES MINIMUM AND 0.389 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5663 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.589 INCHES MINIMUM AND 0.639 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
SII1182-5-35
BOLT,SHEAR
NSN, MFG P/N
5306013601762
NSN
5306-01-360-1762
MFG
SONIC INDUSTRIES INC.
Description
EXTENDED WASHER DIAMETER: 0.575 INCHES MINIMUM AND 0.585 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.035 INCHES MINIMUM AND 0.055 INCHES MAXIMUM
FASTENER LENGTH: 2.724 INCHES MINIMUM AND 2.754 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 2.115 INCHES MINIMUM AND 2.135 INCHES MAXIMUM
HEAD HEIGHT: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.383 INCHES MINIMUM AND 0.389 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5663 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.589 INCHES MINIMUM AND 0.639 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF