My Quote Request
5306-01-371-4685
20 Products
180022
BOLT,MACHINE
NSN, MFG P/N
5306013714685
NSN
5306-01-371-4685
MFG
NAVISTAR DEFENSE LLC
Description
FASTENER LENGTH: 1.000 INCHES NOMINAL
III END ITEM IDENTIFICATION: MRAP - COMMON NSN - USED ON MAXXPRO CAT I AND 3 OTHER WEAPON SYSTEMS
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT, 1/4 X 1 TYPE 5
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
Related Searches:
VFK600-8-36
BOLT,SHEAR
NSN, MFG P/N
5306013713631
NSN
5306-01-371-3631
MFG
VALLEY-TODECO INC.
Description
EXTENDED WASHER DIAMETER: 0.922 INCHES MINIMUM AND 0.932 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.084 INCHES MINIMUM AND 0.104 INCHES MAXIMUM
FASTENER LENGTH: 3.103 INCHES NOMINAL
GRIP DIAMETER: 0.4985 INCHES MINIMUM AND 0.4990 INCHES MAXIMUM
GRIP LENGTH: 2.250 INCHES NOMINAL
HEAD HEIGHT: 0.440 INCHES MINIMUM AND 0.460 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.547 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 22000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.500 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-83488,TY 2,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.787 INCHES NOMINAL
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
VS3190-8-36
BOLT,SHEAR
NSN, MFG P/N
5306013713631
NSN
5306-01-371-3631
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
EXTENDED WASHER DIAMETER: 0.922 INCHES MINIMUM AND 0.932 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.084 INCHES MINIMUM AND 0.104 INCHES MAXIMUM
FASTENER LENGTH: 3.103 INCHES NOMINAL
GRIP DIAMETER: 0.4985 INCHES MINIMUM AND 0.4990 INCHES MAXIMUM
GRIP LENGTH: 2.250 INCHES NOMINAL
HEAD HEIGHT: 0.440 INCHES MINIMUM AND 0.460 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.547 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 22000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.500 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-83488,TY 2,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.787 INCHES NOMINAL
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
VS3190-8-36
BOLT,SHEAR
NSN, MFG P/N
5306013713631
NSN
5306-01-371-3631
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
EXTENDED WASHER DIAMETER: 0.922 INCHES MINIMUM AND 0.932 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.084 INCHES MINIMUM AND 0.104 INCHES MAXIMUM
FASTENER LENGTH: 3.103 INCHES NOMINAL
GRIP DIAMETER: 0.4985 INCHES MINIMUM AND 0.4990 INCHES MAXIMUM
GRIP LENGTH: 2.250 INCHES NOMINAL
HEAD HEIGHT: 0.440 INCHES MINIMUM AND 0.460 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.547 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 22000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.500 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-83488,TY 2,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.787 INCHES NOMINAL
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
5101-2
BOLT,U
NSN, MFG P/N
5306013714069
NSN
5306-01-371-4069
MFG
PDI GROUND SUPPORT SYSTEMS INC.
Description
BOLT,U
Related Searches:
DIN933-M8X40-8.8-TZN
BOLT,MACHINE
NSN, MFG P/N
5306013714088
NSN
5306-01-371-4088
MFG
NEWPORT SCIENTIFIC INC HYGRODYNAMIC PRODUCTS DIV
Description
EXTERNAL THREAD TOLERANCE CLASS: 6G
FASTENER LENGTH: 40.0 MILLIMETERS NOMINAL
HEAD HEIGHT: 5.5 MILLIMETERS NOMINAL
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL PROPERTY CLASS 8.8 OVERALL
NOMINAL THREAD DIAMETER: 8.0 MILLIMETERS
SURFACE TREATMENT: ZINC OVERALL
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 22.0 MILLIMETERS NOMINAL
THREAD PITCH IN MILLIMETERS: 1.25
THREAD SERIES DESIGNATOR: M
WIDTH BETWEEN FLATS: 13.0 MILLIMETERS NOMINAL
Related Searches:
DIN933-M8X40-8.8-TZN
BOLT,MACHINE
NSN, MFG P/N
5306013714088
NSN
5306-01-371-4088
MFG
DIN DEUTSCHES INSTITUT FUER NORMUNG EV
Description
EXTERNAL THREAD TOLERANCE CLASS: 6G
FASTENER LENGTH: 40.0 MILLIMETERS NOMINAL
HEAD HEIGHT: 5.5 MILLIMETERS NOMINAL
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL PROPERTY CLASS 8.8 OVERALL
NOMINAL THREAD DIAMETER: 8.0 MILLIMETERS
SURFACE TREATMENT: ZINC OVERALL
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 22.0 MILLIMETERS NOMINAL
THREAD PITCH IN MILLIMETERS: 1.25
THREAD SERIES DESIGNATOR: M
WIDTH BETWEEN FLATS: 13.0 MILLIMETERS NOMINAL
Related Searches:
BACB30NF9D72
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306013714093
NSN
5306-01-371-4093
MFG
THE BOEING COMPANY DBA BOEING
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 4.934 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH: 5.090 INCHES MINIMUM AND 5.120 INCHES MAXIMUM
GRIP DIAMETER: 0.5605 INCHES MINIMUM AND 0.5615 INCHES MAXIMUM
GRIP LENGTH: 4.490 INCHES MINIMUM AND 4.510 INCHES MAXIMUM
HEAD HEIGHT: 0.281 INCHES MINIMUM AND 0.296 INCHES MAXIMUM
HEAD STYLE: C3 DISHED HEXAGON
MATERIAL: STEEL COMP 4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.562 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 CL 2 TY 2 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.605 INCHES NOMINAL
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.865 INCHES MINIMUM AND 0.877 INCHES MAXIMUM
Related Searches:
BACB30NF9D72
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306013714093
NSN
5306-01-371-4093
MFG
VALLEY-TODECO INC.
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 4.934 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH: 5.090 INCHES MINIMUM AND 5.120 INCHES MAXIMUM
GRIP DIAMETER: 0.5605 INCHES MINIMUM AND 0.5615 INCHES MAXIMUM
GRIP LENGTH: 4.490 INCHES MINIMUM AND 4.510 INCHES MAXIMUM
HEAD HEIGHT: 0.281 INCHES MINIMUM AND 0.296 INCHES MAXIMUM
HEAD STYLE: C3 DISHED HEXAGON
MATERIAL: STEEL COMP 4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.562 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 CL 2 TY 2 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.605 INCHES NOMINAL
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.865 INCHES MINIMUM AND 0.877 INCHES MAXIMUM
Related Searches:
BACB30NF9D72
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306013714093
NSN
5306-01-371-4093
MFG
SPS TECHNOLOGIES LLC DBA AIR INDUSTRIES
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 4.934 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH: 5.090 INCHES MINIMUM AND 5.120 INCHES MAXIMUM
GRIP DIAMETER: 0.5605 INCHES MINIMUM AND 0.5615 INCHES MAXIMUM
GRIP LENGTH: 4.490 INCHES MINIMUM AND 4.510 INCHES MAXIMUM
HEAD HEIGHT: 0.281 INCHES MINIMUM AND 0.296 INCHES MAXIMUM
HEAD STYLE: C3 DISHED HEXAGON
MATERIAL: STEEL COMP 4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.562 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 CL 2 TY 2 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.605 INCHES NOMINAL
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.865 INCHES MINIMUM AND 0.877 INCHES MAXIMUM
Related Searches:
BACB30NF9D72
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306013714093
NSN
5306-01-371-4093
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 4.934 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH: 5.090 INCHES MINIMUM AND 5.120 INCHES MAXIMUM
GRIP DIAMETER: 0.5605 INCHES MINIMUM AND 0.5615 INCHES MAXIMUM
GRIP LENGTH: 4.490 INCHES MINIMUM AND 4.510 INCHES MAXIMUM
HEAD HEIGHT: 0.281 INCHES MINIMUM AND 0.296 INCHES MAXIMUM
HEAD STYLE: C3 DISHED HEXAGON
MATERIAL: STEEL COMP 4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.562 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 CL 2 TY 2 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.605 INCHES NOMINAL
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.865 INCHES MINIMUM AND 0.877 INCHES MAXIMUM
Related Searches:
BACB30NF9D72
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306013714093
NSN
5306-01-371-4093
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 4.934 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH: 5.090 INCHES MINIMUM AND 5.120 INCHES MAXIMUM
GRIP DIAMETER: 0.5605 INCHES MINIMUM AND 0.5615 INCHES MAXIMUM
GRIP LENGTH: 4.490 INCHES MINIMUM AND 4.510 INCHES MAXIMUM
HEAD HEIGHT: 0.281 INCHES MINIMUM AND 0.296 INCHES MAXIMUM
HEAD STYLE: C3 DISHED HEXAGON
MATERIAL: STEEL COMP 4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.562 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 CL 2 TY 2 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.605 INCHES NOMINAL
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.865 INCHES MINIMUM AND 0.877 INCHES MAXIMUM
Related Searches:
BACB30NF9D72
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306013714093
NSN
5306-01-371-4093
MFG
FEDERAL MANUFACTURING CORPORATION
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 4.934 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH: 5.090 INCHES MINIMUM AND 5.120 INCHES MAXIMUM
GRIP DIAMETER: 0.5605 INCHES MINIMUM AND 0.5615 INCHES MAXIMUM
GRIP LENGTH: 4.490 INCHES MINIMUM AND 4.510 INCHES MAXIMUM
HEAD HEIGHT: 0.281 INCHES MINIMUM AND 0.296 INCHES MAXIMUM
HEAD STYLE: C3 DISHED HEXAGON
MATERIAL: STEEL COMP 4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.562 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 CL 2 TY 2 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.605 INCHES NOMINAL
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.865 INCHES MINIMUM AND 0.877 INCHES MAXIMUM
Related Searches:
BACB30NF9D72
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306013714093
NSN
5306-01-371-4093
MFG
PAUL R. BRILES INC. DBA PB FASTENERS
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 4.934 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH: 5.090 INCHES MINIMUM AND 5.120 INCHES MAXIMUM
GRIP DIAMETER: 0.5605 INCHES MINIMUM AND 0.5615 INCHES MAXIMUM
GRIP LENGTH: 4.490 INCHES MINIMUM AND 4.510 INCHES MAXIMUM
HEAD HEIGHT: 0.281 INCHES MINIMUM AND 0.296 INCHES MAXIMUM
HEAD STYLE: C3 DISHED HEXAGON
MATERIAL: STEEL COMP 4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.562 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 CL 2 TY 2 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.605 INCHES NOMINAL
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.865 INCHES MINIMUM AND 0.877 INCHES MAXIMUM
Related Searches:
BACB30NF9D72
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306013714093
NSN
5306-01-371-4093
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 4.934 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH: 5.090 INCHES MINIMUM AND 5.120 INCHES MAXIMUM
GRIP DIAMETER: 0.5605 INCHES MINIMUM AND 0.5615 INCHES MAXIMUM
GRIP LENGTH: 4.490 INCHES MINIMUM AND 4.510 INCHES MAXIMUM
HEAD HEIGHT: 0.281 INCHES MINIMUM AND 0.296 INCHES MAXIMUM
HEAD STYLE: C3 DISHED HEXAGON
MATERIAL: STEEL COMP 4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.562 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 CL 2 TY 2 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.605 INCHES NOMINAL
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.865 INCHES MINIMUM AND 0.877 INCHES MAXIMUM
Related Searches:
BACB30NF9D72
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306013714093
NSN
5306-01-371-4093
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 4.934 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH: 5.090 INCHES MINIMUM AND 5.120 INCHES MAXIMUM
GRIP DIAMETER: 0.5605 INCHES MINIMUM AND 0.5615 INCHES MAXIMUM
GRIP LENGTH: 4.490 INCHES MINIMUM AND 4.510 INCHES MAXIMUM
HEAD HEIGHT: 0.281 INCHES MINIMUM AND 0.296 INCHES MAXIMUM
HEAD STYLE: C3 DISHED HEXAGON
MATERIAL: STEEL COMP 4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.562 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 CL 2 TY 2 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.605 INCHES NOMINAL
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.865 INCHES MINIMUM AND 0.877 INCHES MAXIMUM
Related Searches:
BACB30NF9D72
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306013714093
NSN
5306-01-371-4093
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 4.934 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH: 5.090 INCHES MINIMUM AND 5.120 INCHES MAXIMUM
GRIP DIAMETER: 0.5605 INCHES MINIMUM AND 0.5615 INCHES MAXIMUM
GRIP LENGTH: 4.490 INCHES MINIMUM AND 4.510 INCHES MAXIMUM
HEAD HEIGHT: 0.281 INCHES MINIMUM AND 0.296 INCHES MAXIMUM
HEAD STYLE: C3 DISHED HEXAGON
MATERIAL: STEEL COMP 4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.562 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 CL 2 TY 2 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.605 INCHES NOMINAL
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.865 INCHES MINIMUM AND 0.877 INCHES MAXIMUM
Related Searches:
BACB30NF9D72
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306013714093
NSN
5306-01-371-4093
MFG
HUCK INTL INC
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 4.934 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH: 5.090 INCHES MINIMUM AND 5.120 INCHES MAXIMUM
GRIP DIAMETER: 0.5605 INCHES MINIMUM AND 0.5615 INCHES MAXIMUM
GRIP LENGTH: 4.490 INCHES MINIMUM AND 4.510 INCHES MAXIMUM
HEAD HEIGHT: 0.281 INCHES MINIMUM AND 0.296 INCHES MAXIMUM
HEAD STYLE: C3 DISHED HEXAGON
MATERIAL: STEEL COMP 4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.562 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 CL 2 TY 2 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.605 INCHES NOMINAL
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.865 INCHES MINIMUM AND 0.877 INCHES MAXIMUM
Related Searches:
NAS2906E15
BOLT,SHEAR
NSN, MFG P/N
5306013714250
NSN
5306-01-371-4250
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
GRIP LENGTH: 0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
NOMINAL THREAD DIAMETER: 0.375 INCHES
THREAD CLASS: 3A
THREAD LENGTH: 1.314 INCHES MINIMUM AND 1.344 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
Related Searches:
180022
BOLT,MACHINE
NSN, MFG P/N
5306013714685
NSN
5306-01-371-4685
MFG
KOMATSU AMERICAN INTL CO
Description
FASTENER LENGTH: 1.000 INCHES NOMINAL
III END ITEM IDENTIFICATION: MRAP - COMMON NSN - USED ON MAXXPRO CAT I AND 3 OTHER WEAPON SYSTEMS
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT, 1/4 X 1 TYPE 5
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES