My Quote Request
5310-00-059-5798
20 Products
SRS6778078
NUT,PLAIN,ROUND
NSN, MFG P/N
5310000595798
NSN
5310-00-059-5798
MFG
DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA
Description
DRIVE POINT DEPTH: 0.156 INCHES NOMINAL
DRIVE POINT QUANTITY: 4
DRIVE POINT WIDTH: 0.375 INCHES NOMINAL
HARDNESS RATING: NOT RATED
MATERIAL: STEEL COMP 1141 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD SIZE: 1.250 INCHES
NUT DIAMETER: 2.400 INCHES NOMINAL
NUT STYLE: A76 ROUND
NUT THICKNESS: 0.530 INCHES NOMINAL
SMALL END DIAMETER: 1.380 INCHES NOMINAL
SURFACE TREATMENT: PHOSPHATE MANGANESE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-P-16232,TY M,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
TEMP RATING: NOT RATED
THREAD CLASS: 3B
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 12
THREAD SERIES: UNF
UNDERCUT THICKNESS: 0.170 INCHES NOMINAL
Related Searches:
540668-151
NUT,PLAIN,CLINCH
NSN, MFG P/N
5310000595239
NSN
5310-00-059-5239
MFG
BAE SYSTEMS NATIONAL SECURITY SOLUTIONS INC.
Description
DESIGN CONTROL REFERENCE: AC-0420-2
FEATURES PROVIDED: FLOATING NUT
HARDNESS RATING: NOT RATED
MANUFACTURERS CODE: 46384
MATERIAL: STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD SIZE: 0.250 INCHES
NUT DIAMETER: 0.594 INCHES NOMINAL
NUT HEIGHT: 0.257 INCHES MAXIMUM
NUT STYLE: A59 CLINCH
PILOT DIAMETER: 0.514 INCHES MAXIMUM
PILOT LENGTH: 0.054 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
TEMP RATING: NOT RATED
THE MANUFACTURERS DATA:
THREAD CLASS: 2B
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 20
THREAD SERIES: UNC
Related Searches:
AC-0420-2
NUT,PLAIN,CLINCH
NSN, MFG P/N
5310000595239
NSN
5310-00-059-5239
MFG
PENN ENGINEERING & MANUFACTURING CORP.
Description
DESIGN CONTROL REFERENCE: AC-0420-2
FEATURES PROVIDED: FLOATING NUT
HARDNESS RATING: NOT RATED
MANUFACTURERS CODE: 46384
MATERIAL: STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD SIZE: 0.250 INCHES
NUT DIAMETER: 0.594 INCHES NOMINAL
NUT HEIGHT: 0.257 INCHES MAXIMUM
NUT STYLE: A59 CLINCH
PILOT DIAMETER: 0.514 INCHES MAXIMUM
PILOT LENGTH: 0.054 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
TEMP RATING: NOT RATED
THE MANUFACTURERS DATA:
THREAD CLASS: 2B
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 20
THREAD SERIES: UNC
Related Searches:
638328
NUT,PLAIN,CASTELLATED,HEXAGON
NSN, MFG P/N
5310000595242
NSN
5310-00-059-5242
MFG
SPX CORPORATION DBA SPX PRECISION COMPONENTS
Description
BEARING SURFACE TYPE: WASHER FACED
DESIGN CONTROL REFERENCE: 638328
III BEARING SURFACE FINISH: 63.0 MICROINCHES
MANUFACTURERS CODE: 82001
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5625 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD SIZE: 0.250 INCHES
NUT HEIGHT: 0.330 INCHES MINIMUM AND 0.350 INCHES MAXIMUM
NUT STYLE: A1 CASTELLATED, HEXAGON
THE MANUFACTURERS DATA:
THREAD CLASS: 3B
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 28
THREAD SERIES: UNJF
WIDTH ACROSS FLATS: 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
Related Searches:
638328
NUT,PLAIN,CASTELLATED,HEXAGON
NSN, MFG P/N
5310000595242
NSN
5310-00-059-5242
MFG
ROYAL OAK GAGE INC
Description
BEARING SURFACE TYPE: WASHER FACED
DESIGN CONTROL REFERENCE: 638328
III BEARING SURFACE FINISH: 63.0 MICROINCHES
MANUFACTURERS CODE: 82001
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5625 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD SIZE: 0.250 INCHES
NUT HEIGHT: 0.330 INCHES MINIMUM AND 0.350 INCHES MAXIMUM
NUT STYLE: A1 CASTELLATED, HEXAGON
THE MANUFACTURERS DATA:
THREAD CLASS: 3B
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 28
THREAD SERIES: UNJF
WIDTH ACROSS FLATS: 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
Related Searches:
638328
NUT,PLAIN,CASTELLATED,HEXAGON
NSN, MFG P/N
5310000595242
NSN
5310-00-059-5242
MFG
J.T. SLOCOMB CORP
Description
BEARING SURFACE TYPE: WASHER FACED
DESIGN CONTROL REFERENCE: 638328
III BEARING SURFACE FINISH: 63.0 MICROINCHES
MANUFACTURERS CODE: 82001
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5625 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD SIZE: 0.250 INCHES
NUT HEIGHT: 0.330 INCHES MINIMUM AND 0.350 INCHES MAXIMUM
NUT STYLE: A1 CASTELLATED, HEXAGON
THE MANUFACTURERS DATA:
THREAD CLASS: 3B
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 28
THREAD SERIES: UNJF
WIDTH ACROSS FLATS: 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
Related Searches:
638328
NUT,PLAIN,CASTELLATED,HEXAGON
NSN, MFG P/N
5310000595242
NSN
5310-00-059-5242
MFG
TURBO POWER & MARINE SYSTEM INC SUB OF UNITED TECHNOLOGIES CORP
Description
BEARING SURFACE TYPE: WASHER FACED
DESIGN CONTROL REFERENCE: 638328
III BEARING SURFACE FINISH: 63.0 MICROINCHES
MANUFACTURERS CODE: 82001
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5625 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD SIZE: 0.250 INCHES
NUT HEIGHT: 0.330 INCHES MINIMUM AND 0.350 INCHES MAXIMUM
NUT STYLE: A1 CASTELLATED, HEXAGON
THE MANUFACTURERS DATA:
THREAD CLASS: 3B
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 28
THREAD SERIES: UNJF
WIDTH ACROSS FLATS: 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
Related Searches:
638328
NUT,PLAIN,CASTELLATED,HEXAGON
NSN, MFG P/N
5310000595242
NSN
5310-00-059-5242
MFG
UNITED TECHNOLOGIES CORPORATION DBA PRATT & WHITNEY DIV SPARES/SUPPORT EQUIPMENT
Description
BEARING SURFACE TYPE: WASHER FACED
DESIGN CONTROL REFERENCE: 638328
III BEARING SURFACE FINISH: 63.0 MICROINCHES
MANUFACTURERS CODE: 82001
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5625 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD SIZE: 0.250 INCHES
NUT HEIGHT: 0.330 INCHES MINIMUM AND 0.350 INCHES MAXIMUM
NUT STYLE: A1 CASTELLATED, HEXAGON
THE MANUFACTURERS DATA:
THREAD CLASS: 3B
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 28
THREAD SERIES: UNJF
WIDTH ACROSS FLATS: 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
Related Searches:
532352-44
NUT,PLAIN,CLINCH
NSN, MFG P/N
5310000595262
NSN
5310-00-059-5262
MFG
RAYTHEON COMPANY
Description
COUNTERBORE DIAMETER: 0.149 INCHES MINIMUM AND 0.152 INCHES MAXIMUM NUT
HARDNESS RATING: NOT RATED
MATERIAL: ALUMINUM ALLOY 2011 OR ALUMINUM ALLOY 6262 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/3 TEMPER T3 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-225/10 TEMPER T9 FED SPEC 2ND MATERIAL RESPONSE OVERALL
NOMINAL THREAD SIZE: 0.112 INCHES
NUT COUNTERBORE DEPTH: 0.135 INCHES NOMINAL NUT
NUT HEIGHT: 0.385 INCHES NOMINAL
NUT STYLE: A60 CLINCH
PILOT DIAMETER: 0.185 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
PILOT LENGTH: 0.135 INCHES NOMINAL
SURFACE TREATMENT: ANODIZE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
TEMP RATING: NOT RATED
THREAD CLASS: 2B
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 40
THREAD SERIES: UNC
WIDTH ACROSS FLATS: 0.250 INCHES NOMINAL
Related Searches:
9626CA0440-1B
NUT,PLAIN,CLINCH
NSN, MFG P/N
5310000595262
NSN
5310-00-059-5262
MFG
CAREY MANUFACTURING COMPANY INC. DBA AMATOM ELECTRONIC HARDWARES USE CAGE CODE 5W748 FOR CATALOGING.
Description
COUNTERBORE DIAMETER: 0.149 INCHES MINIMUM AND 0.152 INCHES MAXIMUM NUT
HARDNESS RATING: NOT RATED
MATERIAL: ALUMINUM ALLOY 2011 OR ALUMINUM ALLOY 6262 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/3 TEMPER T3 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-225/10 TEMPER T9 FED SPEC 2ND MATERIAL RESPONSE OVERALL
NOMINAL THREAD SIZE: 0.112 INCHES
NUT COUNTERBORE DEPTH: 0.135 INCHES NOMINAL NUT
NUT HEIGHT: 0.385 INCHES NOMINAL
NUT STYLE: A60 CLINCH
PILOT DIAMETER: 0.185 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
PILOT LENGTH: 0.135 INCHES NOMINAL
SURFACE TREATMENT: ANODIZE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
TEMP RATING: NOT RATED
THREAD CLASS: 2B
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 40
THREAD SERIES: UNC
WIDTH ACROSS FLATS: 0.250 INCHES NOMINAL
Related Searches:
9626CA0440-1B
NUT,PLAIN,CLINCH
NSN, MFG P/N
5310000595262
NSN
5310-00-059-5262
MFG
NEW HAVEN MFG CORP AMATOM ELECTRONIC HARDWARE DIV
Description
COUNTERBORE DIAMETER: 0.149 INCHES MINIMUM AND 0.152 INCHES MAXIMUM NUT
HARDNESS RATING: NOT RATED
MATERIAL: ALUMINUM ALLOY 2011 OR ALUMINUM ALLOY 6262 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/3 TEMPER T3 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-225/10 TEMPER T9 FED SPEC 2ND MATERIAL RESPONSE OVERALL
NOMINAL THREAD SIZE: 0.112 INCHES
NUT COUNTERBORE DEPTH: 0.135 INCHES NOMINAL NUT
NUT HEIGHT: 0.385 INCHES NOMINAL
NUT STYLE: A60 CLINCH
PILOT DIAMETER: 0.185 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
PILOT LENGTH: 0.135 INCHES NOMINAL
SURFACE TREATMENT: ANODIZE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
TEMP RATING: NOT RATED
THREAD CLASS: 2B
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 40
THREAD SERIES: UNC
WIDTH ACROSS FLATS: 0.250 INCHES NOMINAL
Related Searches:
16848
NUT,PLAIN,HEXAGON
NSN, MFG P/N
5310000595263
NSN
5310-00-059-5263
MFG
EATON CORPORATION DIV EATON AEROSPACE LLC
Description
BEARING SURFACE TYPE: CHAMFERED
DESIGN CONTROL REFERENCE: 16848
DRILLED HOLE DIAMETER: 0.047 INCHES NOMINAL
HARDNESS RATING: NOT RATED
HOLE CONFIGURATION STYLE: H2 CONFIGURATION B
HOLE TYPE AND QUANTITY: 3 DRILLED
MANUFACTURERS CODE: 99643
MATERIAL: STEEL COMP 630 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD SIZE: 1.000 INCHES
NUT HEIGHT: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
NUT STYLE: A12 HEXAGON
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: SPS 206 MFR REF SINGLE TREATMENT RESPONSE OVERALL
TEMP RATING: NOT RATED
THE MANUFACTURERS DATA:
THREAD CLASS: 3B
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 20
THREAD SERIES: UNEF
WIDTH ACROSS FLATS: 1.120 INCHES MINIMUM AND 1.130 INCHES MAXIMUM
Related Searches:
STD2090
NUT,PLAIN,HEXAGON
NSN, MFG P/N
5310000595273
NSN
5310-00-059-5273
MFG
TEXTRON LYCOMING INC WILLIAMSPORT PLANT
Description
BEARING SURFACE TYPE: WASHER FACED
COUNTERSINK ANGLE: 110.0 DEGREES NOMINAL NUT
DESIGN CONTROL REFERENCE: STD2090
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM
MANUFACTURERS CODE: 80254
MATERIAL: STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6320 ASSN STD 1ST MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL
NOMINAL THREAD SIZE: 0.500 INCHES
NUT HEIGHT: 0.380 INCHES NOMINAL
NUT STYLE: A12 HEXAGON
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
TEMP RATING: NOT RATED
THE MANUFACTURERS DATA:
THREAD CLASS: 3B
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 20
THREAD SERIES: UNF
WIDTH ACROSS FLATS: 0.750 INCHES NOMINAL
Related Searches:
137301-105
WASHER,FLAT
NSN, MFG P/N
5310000595291
NSN
5310-00-059-5291
MFG
GE AVIATION SYSTEMS LLC
Description
CENTER HOLE SHAPE STYLE: 1 ROUND
CROSS-SECTIONAL SHAPE STYLE: 1 RECTANGULAR
HOLE DIAMETER: 0.192 INCHES MINIMUM AND 0.198 INCHES MAXIMUM
III MINIMUM TENSILE STRENGTH: 75000 POUNDS PER SQUARE INCH
MATERIAL: STEEL COMP 321 OR STEEL COMP 348 OR STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6721 MIL SPEC 1ST MATERIAL RESPONSE OR QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE AND MIL-S-6721 MIL SPEC 2ND MATERIAL RESPONSE AND QQ-S-763 FED SPEC 3RD MATERIAL RESPONSE OVERALL
OVERALL DIAMETER: 0.459 INCHES MINIMUM AND 0.479 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE: 1 ROUND
SPECIFICATION/STANDARD DATA: 80205-NAS1587 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 63.0 MICROINCHES TOP 63.0 MICROINCHES BOTTOM
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THICKNESS: 0.032 INCHES NOMINAL
Related Searches:
NAS1587-3
WASHER,FLAT
NSN, MFG P/N
5310000595291
NSN
5310-00-059-5291
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
CENTER HOLE SHAPE STYLE: 1 ROUND
CROSS-SECTIONAL SHAPE STYLE: 1 RECTANGULAR
HOLE DIAMETER: 0.192 INCHES MINIMUM AND 0.198 INCHES MAXIMUM
III MINIMUM TENSILE STRENGTH: 75000 POUNDS PER SQUARE INCH
MATERIAL: STEEL COMP 321 OR STEEL COMP 348 OR STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6721 MIL SPEC 1ST MATERIAL RESPONSE OR QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE AND MIL-S-6721 MIL SPEC 2ND MATERIAL RESPONSE AND QQ-S-763 FED SPEC 3RD MATERIAL RESPONSE OVERALL
OVERALL DIAMETER: 0.459 INCHES MINIMUM AND 0.479 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE: 1 ROUND
SPECIFICATION/STANDARD DATA: 80205-NAS1587 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 63.0 MICROINCHES TOP 63.0 MICROINCHES BOTTOM
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THICKNESS: 0.032 INCHES NOMINAL
Related Searches:
10861316-1
WASHER,CONVEX
NSN, MFG P/N
5310000595327
NSN
5310-00-059-5327
MFG
U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
Description
HOLE DIAMETER: 0.641 INCHES MINIMUM AND 0.671 INCHES MAXIMUM
MATERIAL: ALUMINUM ALLOY 356.0 OR ALUMINUM ALLOY B443.0 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-601,T6 FED SPEC 1ST MATERIAL RESPONSE AND QQ-A-596 FED SPEC 2ND MATERIAL RESPONSE AND MIL-A-17358C MIL SPEC 3RD MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS: 0.516 INCHES MINIMUM AND 0.546 INCHES MAXIMUM
OUTSIDE DIAMETER: 3.125 INCHES NOMINAL
STYLE DESIGNATOR: 7 CONVEX
Related Searches:
10861316-1
WASHER,CONVEX
NSN, MFG P/N
5310000595327
NSN
5310-00-059-5327
MFG
FNSS SAVUNMA SISTEMLERI A.S.
Description
HOLE DIAMETER: 0.641 INCHES MINIMUM AND 0.671 INCHES MAXIMUM
MATERIAL: ALUMINUM ALLOY 356.0 OR ALUMINUM ALLOY B443.0 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-601,T6 FED SPEC 1ST MATERIAL RESPONSE AND QQ-A-596 FED SPEC 2ND MATERIAL RESPONSE AND MIL-A-17358C MIL SPEC 3RD MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS: 0.516 INCHES MINIMUM AND 0.546 INCHES MAXIMUM
OUTSIDE DIAMETER: 3.125 INCHES NOMINAL
STYLE DESIGNATOR: 7 CONVEX
Related Searches:
300326
WASHER,CONVEX
NSN, MFG P/N
5310000595327
NSN
5310-00-059-5327
MFG
WIBA ZEVENAAR BV
Description
HOLE DIAMETER: 0.641 INCHES MINIMUM AND 0.671 INCHES MAXIMUM
MATERIAL: ALUMINUM ALLOY 356.0 OR ALUMINUM ALLOY B443.0 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-601,T6 FED SPEC 1ST MATERIAL RESPONSE AND QQ-A-596 FED SPEC 2ND MATERIAL RESPONSE AND MIL-A-17358C MIL SPEC 3RD MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS: 0.516 INCHES MINIMUM AND 0.546 INCHES MAXIMUM
OUTSIDE DIAMETER: 3.125 INCHES NOMINAL
STYLE DESIGNATOR: 7 CONVEX
Related Searches:
5310000595327
WASHER,CONVEX
NSN, MFG P/N
5310000595327
NSN
5310-00-059-5327
MFG
E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES
Description
HOLE DIAMETER: 0.641 INCHES MINIMUM AND 0.671 INCHES MAXIMUM
MATERIAL: ALUMINUM ALLOY 356.0 OR ALUMINUM ALLOY B443.0 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-601,T6 FED SPEC 1ST MATERIAL RESPONSE AND QQ-A-596 FED SPEC 2ND MATERIAL RESPONSE AND MIL-A-17358C MIL SPEC 3RD MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS: 0.516 INCHES MINIMUM AND 0.546 INCHES MAXIMUM
OUTSIDE DIAMETER: 3.125 INCHES NOMINAL
STYLE DESIGNATOR: 7 CONVEX
Related Searches:
6778078
NUT,PLAIN,ROUND
NSN, MFG P/N
5310000595798
NSN
5310-00-059-5798
MFG
ALLISON TRANSMISSION INC. DBA ALLISON TRANSMISSION DIV ALLISON TRANSMISSION
Description
DRIVE POINT DEPTH: 0.156 INCHES NOMINAL
DRIVE POINT QUANTITY: 4
DRIVE POINT WIDTH: 0.375 INCHES NOMINAL
HARDNESS RATING: NOT RATED
MATERIAL: STEEL COMP 1141 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD SIZE: 1.250 INCHES
NUT DIAMETER: 2.400 INCHES NOMINAL
NUT STYLE: A76 ROUND
NUT THICKNESS: 0.530 INCHES NOMINAL
SMALL END DIAMETER: 1.380 INCHES NOMINAL
SURFACE TREATMENT: PHOSPHATE MANGANESE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-P-16232,TY M,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
TEMP RATING: NOT RATED
THREAD CLASS: 3B
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 12
THREAD SERIES: UNF
UNDERCUT THICKNESS: 0.170 INCHES NOMINAL