My Quote Request
5320-00-117-6947
20 Products
AN426AD3-16
RIVET,SOLID
NSN, MFG P/N
5320001176947
NSN
5320-00-117-6947
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
COUNTERSINK ANGLE: 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
FASTENER LENGTH: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM
GRIP LENGTH: 0.849 INCHES MINIMUM AND 0.869 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.175 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: ALUMINUM ALLOY 2117 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SHANK DIAMETER: 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
SHANK STYLE: D10 STRAIGHT W/RADIUS CHAMFERED TIP
SHEAR STRENGTH: 26000 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENT: ANODIZE OR OXIDE FILM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
Related Searches:
MS20426AD3-8
RIVET,SOLID
NSN, MFG P/N
5320001176942
NSN
5320-00-117-6942
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
COUNTERSINK ANGLE: 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
FASTENER LENGTH: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
GRIP LENGTH: 0.359 INCHES NOMINAL
HEAD MAJOR DIAMETER: 0.175 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: ALUMINUM ALLOY 2117 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SHANK DIAMETER: 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
SHANK STYLE: D10 STRAIGHT W/RADIUS CHAMFERED TIP
SHEAR STRENGTH: 26000 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENT: ANODIZE OR OXIDE FILM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
Related Searches:
MS20426AD3-8
RIVET,SOLID
NSN, MFG P/N
5320001176942
NSN
5320-00-117-6942
MFG
HARDMAN INC
Description
COUNTERSINK ANGLE: 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
FASTENER LENGTH: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
GRIP LENGTH: 0.359 INCHES NOMINAL
HEAD MAJOR DIAMETER: 0.175 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: ALUMINUM ALLOY 2117 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SHANK DIAMETER: 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
SHANK STYLE: D10 STRAIGHT W/RADIUS CHAMFERED TIP
SHEAR STRENGTH: 26000 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENT: ANODIZE OR OXIDE FILM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
Related Searches:
AN426AD3-9
RIVET,SOLID
NSN, MFG P/N
5320001176943
NSN
5320-00-117-6943
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
COUNTERSINK ANGLE: 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
FASTENER LENGTH: 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM
GRIP LENGTH: 0.421 INCHES NOMINAL
HEAD MAJOR DIAMETER: 0.175 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: ALUMINUM ALLOY 2117 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SHANK DIAMETER: 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
SHANK STYLE: D10 STRAIGHT W/RADIUS CHAMFERED TIP
SHEAR STRENGTH: 26000 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENT: ANODIZE OR OXIDE FILM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
Related Searches:
MILR5674
RIVET,SOLID
NSN, MFG P/N
5320001176943
NSN
5320-00-117-6943
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
FASTENER LENGTH: 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM
GRIP LENGTH: 0.421 INCHES NOMINAL
HEAD MAJOR DIAMETER: 0.175 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: ALUMINUM ALLOY 2117 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SHANK DIAMETER: 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
SHANK STYLE: D10 STRAIGHT W/RADIUS CHAMFERED TIP
SHEAR STRENGTH: 26000 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENT: ANODIZE OR OXIDE FILM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
Related Searches:
MILR5674
RIVET,SOLID
NSN, MFG P/N
5320001176943
NSN
5320-00-117-6943
MFG
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
COUNTERSINK ANGLE: 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
FASTENER LENGTH: 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM
GRIP LENGTH: 0.421 INCHES NOMINAL
HEAD MAJOR DIAMETER: 0.175 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: ALUMINUM ALLOY 2117 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SHANK DIAMETER: 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
SHANK STYLE: D10 STRAIGHT W/RADIUS CHAMFERED TIP
SHEAR STRENGTH: 26000 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENT: ANODIZE OR OXIDE FILM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
Related Searches:
MS20426AD3-9
RIVET,SOLID
NSN, MFG P/N
5320001176943
NSN
5320-00-117-6943
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
FASTENER LENGTH: 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM
GRIP LENGTH: 0.421 INCHES NOMINAL
HEAD MAJOR DIAMETER: 0.175 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: ALUMINUM ALLOY 2117 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SHANK DIAMETER: 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
SHANK STYLE: D10 STRAIGHT W/RADIUS CHAMFERED TIP
SHEAR STRENGTH: 26000 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENT: ANODIZE OR OXIDE FILM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
Related Searches:
MS20426AD3-9
RIVET,SOLID
NSN, MFG P/N
5320001176943
NSN
5320-00-117-6943
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
COUNTERSINK ANGLE: 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
FASTENER LENGTH: 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM
GRIP LENGTH: 0.421 INCHES NOMINAL
HEAD MAJOR DIAMETER: 0.175 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: ALUMINUM ALLOY 2117 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SHANK DIAMETER: 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
SHANK STYLE: D10 STRAIGHT W/RADIUS CHAMFERED TIP
SHEAR STRENGTH: 26000 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENT: ANODIZE OR OXIDE FILM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
Related Searches:
5320001176945
RIVET,SOLID
NSN, MFG P/N
5320001176945
NSN
5320-00-117-6945
MFG
E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES
Description
COUNTERSINK ANGLE: 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
FASTENER LENGTH: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
GRIP LENGTH: 0.599 INCHES MINIMUM AND 0.619 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.175 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: ALUMINUM ALLOY 2117 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SHANK DIAMETER: 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
SHANK STYLE: D10 STRAIGHT W/RADIUS CHAMFERED TIP
SHEAR STRENGTH: 26000 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENT: ANODIZE OR OXIDE FILM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
Related Searches:
AN426AD3-12
RIVET,SOLID
NSN, MFG P/N
5320001176945
NSN
5320-00-117-6945
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
COUNTERSINK ANGLE: 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
FASTENER LENGTH: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
GRIP LENGTH: 0.599 INCHES MINIMUM AND 0.619 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.175 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: ALUMINUM ALLOY 2117 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SHANK DIAMETER: 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
SHANK STYLE: D10 STRAIGHT W/RADIUS CHAMFERED TIP
SHEAR STRENGTH: 26000 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENT: ANODIZE OR OXIDE FILM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
Related Searches:
AS2229-312
RIVET,SOLID
NSN, MFG P/N
5320001176945
NSN
5320-00-117-6945
MFG
SOCIETY OF BRITISH AEROSPACE COMPANI LTD SBAC
Description
COUNTERSINK ANGLE: 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
FASTENER LENGTH: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
GRIP LENGTH: 0.599 INCHES MINIMUM AND 0.619 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.175 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: ALUMINUM ALLOY 2117 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SHANK DIAMETER: 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
SHANK STYLE: D10 STRAIGHT W/RADIUS CHAMFERED TIP
SHEAR STRENGTH: 26000 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENT: ANODIZE OR OXIDE FILM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
Related Searches:
MILR5674
RIVET,SOLID
NSN, MFG P/N
5320001176945
NSN
5320-00-117-6945
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
FASTENER LENGTH: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
GRIP LENGTH: 0.599 INCHES MINIMUM AND 0.619 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.175 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: ALUMINUM ALLOY 2117 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SHANK DIAMETER: 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
SHANK STYLE: D10 STRAIGHT W/RADIUS CHAMFERED TIP
SHEAR STRENGTH: 26000 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENT: ANODIZE OR OXIDE FILM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
Related Searches:
MILR5674
RIVET,SOLID
NSN, MFG P/N
5320001176945
NSN
5320-00-117-6945
MFG
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
COUNTERSINK ANGLE: 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
FASTENER LENGTH: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
GRIP LENGTH: 0.599 INCHES MINIMUM AND 0.619 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.175 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: ALUMINUM ALLOY 2117 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SHANK DIAMETER: 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
SHANK STYLE: D10 STRAIGHT W/RADIUS CHAMFERED TIP
SHEAR STRENGTH: 26000 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENT: ANODIZE OR OXIDE FILM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
Related Searches:
MS20426AD3-12
RIVET,SOLID
NSN, MFG P/N
5320001176945
NSN
5320-00-117-6945
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
FASTENER LENGTH: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
GRIP LENGTH: 0.599 INCHES MINIMUM AND 0.619 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.175 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: ALUMINUM ALLOY 2117 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SHANK DIAMETER: 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
SHANK STYLE: D10 STRAIGHT W/RADIUS CHAMFERED TIP
SHEAR STRENGTH: 26000 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENT: ANODIZE OR OXIDE FILM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
Related Searches:
MS20426AD3-12
RIVET,SOLID
NSN, MFG P/N
5320001176945
NSN
5320-00-117-6945
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
COUNTERSINK ANGLE: 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
FASTENER LENGTH: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
GRIP LENGTH: 0.599 INCHES MINIMUM AND 0.619 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.175 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: ALUMINUM ALLOY 2117 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SHANK DIAMETER: 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
SHANK STYLE: D10 STRAIGHT W/RADIUS CHAMFERED TIP
SHEAR STRENGTH: 26000 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENT: ANODIZE OR OXIDE FILM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
Related Searches:
NASM5674
RIVET,SOLID
NSN, MFG P/N
5320001176945
NSN
5320-00-117-6945
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
FASTENER LENGTH: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
GRIP LENGTH: 0.599 INCHES MINIMUM AND 0.619 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.175 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: ALUMINUM ALLOY 2117 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SHANK DIAMETER: 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
SHANK STYLE: D10 STRAIGHT W/RADIUS CHAMFERED TIP
SHEAR STRENGTH: 26000 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENT: ANODIZE OR OXIDE FILM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
Related Searches:
17-615-00-011
RIVET,SOLID
NSN, MFG P/N
5320001176946
NSN
5320-00-117-6946
MFG
NORTHROP GRUMMAN CORPORATION DBA INTEGRATED SYSTEMS SECTOR DIV INTEGRATED SYSTEMS SECTOR
Description
COUNTERSINK ANGLE: 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
FASTENER LENGTH: 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM
GRIP LENGTH: 0.724 INCHES MINIMUM AND 0.744 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.175 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: ALUMINUM ALLOY 2117 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SHANK DIAMETER: 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
SHANK STYLE: D10 STRAIGHT W/RADIUS CHAMFERED TIP
SHEAR STRENGTH: 26000 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENT: ANODIZE OR OXIDE FILM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
Related Searches:
AN426AD3-14
RIVET,SOLID
NSN, MFG P/N
5320001176946
NSN
5320-00-117-6946
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
COUNTERSINK ANGLE: 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
FASTENER LENGTH: 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM
GRIP LENGTH: 0.724 INCHES MINIMUM AND 0.744 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.175 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: ALUMINUM ALLOY 2117 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SHANK DIAMETER: 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
SHANK STYLE: D10 STRAIGHT W/RADIUS CHAMFERED TIP
SHEAR STRENGTH: 26000 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENT: ANODIZE OR OXIDE FILM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
Related Searches:
MS20426AD3-14
RIVET,SOLID
NSN, MFG P/N
5320001176946
NSN
5320-00-117-6946
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
FASTENER LENGTH: 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM
GRIP LENGTH: 0.724 INCHES MINIMUM AND 0.744 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.175 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: ALUMINUM ALLOY 2117 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SHANK DIAMETER: 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
SHANK STYLE: D10 STRAIGHT W/RADIUS CHAMFERED TIP
SHEAR STRENGTH: 26000 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENT: ANODIZE OR OXIDE FILM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
Related Searches:
MS20426AD3-14
RIVET,SOLID
NSN, MFG P/N
5320001176946
NSN
5320-00-117-6946
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
COUNTERSINK ANGLE: 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
FASTENER LENGTH: 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM
GRIP LENGTH: 0.724 INCHES MINIMUM AND 0.744 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.175 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: ALUMINUM ALLOY 2117 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SHANK DIAMETER: 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
SHANK STYLE: D10 STRAIGHT W/RADIUS CHAMFERED TIP
SHEAR STRENGTH: 26000 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENT: ANODIZE OR OXIDE FILM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL