My Quote Request
5320-00-811-8413
20 Products
FFA164-4
RIVET,BLIND
NSN, MFG P/N
5320008118413
NSN
5320-00-811-8413
MFG
MONOGRAM AEROSPACE FASTENERS INC.
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
DESIGN CONTROL REFERENCE: FFA164-4
EXPANSION DEVICE: THREADED MANDREL
FASTENER LENGTH: 0.360 INCHES NOMINAL
GRIP LENGTH: 0.250 INCHES NOMINAL
HARDNESS RATING: 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM BOLT 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM NUT
HEAD HEIGHT: 0.067 INCHES MINIMUM AND 0.074 INCHES MAXIMUM
HEAD STYLE: C11 HEXAGON COUNTERSUNK
MANUFACTURERS CODE: 98524
MATERIAL: STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 BOLT ALUMINUM ALLOY 7075 NUT STEEL COMP 303 OR STEEL COMP 304 SLEEVE
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE BOLT QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE NUT ASTM A582 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5641 ASSN STD 1ST
SHANK DIAMETER: 0.163 INCHES MINIMUM AND 0.165 INCHES MAXIMUM
SHANK STYLE: D34 THREADED SELF-PLUGGING SHANK W/SLEEVE
SURFACE TREATMENT: CADMIUM AND CHROMATE BOLT ANODIZE NUT PASSIVATE OR CADMIUM SLEEVE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE BOLT MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE NUT QQ-P-35 FED SPEC 1ST TREATMENT RESPONSE AND QQ-P-416 TY 1 CL 3 FED SPEC 2ND TREATMENT RESPONSE SLEEVE
THE MANUFACTURERS DATA:
WIDTH ACROSS FLATS: 0.277 INCHES MINIMUM AND 0.283 INCHES MAXIMUM
~1: MATERIAL RESPONSE OR QQ-S-763 FED SPEC 2ND MATERIAL RESPONSE OR AMS 5639 ASSN STD 2ND MATERIAL RESPONSE SLEEVE
Related Searches:
RV841-4-3
RIVET,BLIND
NSN, MFG P/N
5320008116326
NSN
5320-00-811-6326
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN DIV LOCKHEED MARTIN AERONAUTICS COMPANY
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
EXPANSION DEVICE: SERRATED STEM-TYPE W
FASTENER LENGTH: 0.295 INCHES NOMINAL
GRIP LENGTH: 0.187 INCHES NOMINAL
HEAD MAJOR DIAMETER: 0.236 INCHES NOMINAL
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: STEEL OVERALL
SHANK DIAMETER: 0.125 INCHES NOMINAL
SHANK STYLE: D18 SELF-PLUGGING
SURFACE TREATMENT: ANY ACCEPTABLE OVERALL
Related Searches:
RV841-4-3
RIVET,BLIND
NSN, MFG P/N
5320008116326
NSN
5320-00-811-6326
MFG
OLYMPIC FASTENING SYSTEMS INC
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
EXPANSION DEVICE: SERRATED STEM-TYPE W
FASTENER LENGTH: 0.295 INCHES NOMINAL
GRIP LENGTH: 0.187 INCHES NOMINAL
HEAD MAJOR DIAMETER: 0.236 INCHES NOMINAL
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: STEEL OVERALL
SHANK DIAMETER: 0.125 INCHES NOMINAL
SHANK STYLE: D18 SELF-PLUGGING
SURFACE TREATMENT: ANY ACCEPTABLE OVERALL
Related Searches:
FXP008-5-12
RIVET,BLIND
NSN, MFG P/N
5320008117286
NSN
5320-00-811-7286
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN DIV LOCKHEED MARTIN AERONAUTICS COMPANY
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
DESIGN CONTROL REFERENCE: FXP008-5-12
FASTENER LENGTH: 0.275 INCHES NOMINAL
GRIP LENGTH: 0.120 INCHES NOMINAL
HEAD MAJOR DIAMETER: 0.286 INCHES NOMINAL
HEAD STYLE: C9 FLUSH COUNTERSUNK
MANUFACTURERS CODE: 81755
MATERIAL: ALUMINUM ALLOY 2017 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-W-7986 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
SHANK DIAMETER: 0.125 INCHES NOMINAL
SURFACE TREATMENT: TIN OVERALL
THE MANUFACTURERS DATA:
Related Searches:
1249-0306
RIVET,BLIND
NSN, MFG P/N
5320008117299
NSN
5320-00-811-7299
MFG
AVIBANK MFG. INC.
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
EXPANSION DEVICE: MANDREL-TYPE C
FASTENER LENGTH: 0.203 INCHES MAXIMUM
GRIP LENGTH: 0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.179 INCHES NOMINAL
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: ALUMINUM ALLOY 2117 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-W-7986 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
SHANK DIAMETER: 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
SHANK STYLE: D19 PULL THROUGH HOLLOW SHANK
SHEAR STRENGTH: 70 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENT: ANODIZE OR OXIDE FILM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
Related Searches:
1249-0306
RIVET,BLIND
NSN, MFG P/N
5320008117299
NSN
5320-00-811-7299
MFG
TECNOTEC SARL
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
EXPANSION DEVICE: MANDREL-TYPE C
FASTENER LENGTH: 0.203 INCHES MAXIMUM
GRIP LENGTH: 0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.179 INCHES NOMINAL
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: ALUMINUM ALLOY 2117 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-W-7986 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
SHANK DIAMETER: 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
SHANK STYLE: D19 PULL THROUGH HOLLOW SHANK
SHEAR STRENGTH: 70 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENT: ANODIZE OR OXIDE FILM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
Related Searches:
1249-0306
RIVET,BLIND
NSN, MFG P/N
5320008117299
NSN
5320-00-811-7299
MFG
SATAIR A/S
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
EXPANSION DEVICE: MANDREL-TYPE C
FASTENER LENGTH: 0.203 INCHES MAXIMUM
GRIP LENGTH: 0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.179 INCHES NOMINAL
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: ALUMINUM ALLOY 2117 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-W-7986 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
SHANK DIAMETER: 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
SHANK STYLE: D19 PULL THROUGH HOLLOW SHANK
SHEAR STRENGTH: 70 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENT: ANODIZE OR OXIDE FILM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
Related Searches:
1249-0306
RIVET,BLIND
NSN, MFG P/N
5320008117299
NSN
5320-00-811-7299
MFG
AVDEL CORP
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
EXPANSION DEVICE: MANDREL-TYPE C
FASTENER LENGTH: 0.203 INCHES MAXIMUM
GRIP LENGTH: 0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.179 INCHES NOMINAL
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: ALUMINUM ALLOY 2117 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-W-7986 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
SHANK DIAMETER: 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
SHANK STYLE: D19 PULL THROUGH HOLLOW SHANK
SHEAR STRENGTH: 70 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENT: ANODIZE OR OXIDE FILM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
Related Searches:
MS20605AD3C2
RIVET,BLIND
NSN, MFG P/N
5320008117299
NSN
5320-00-811-7299
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
EXPANSION DEVICE: MANDREL-TYPE C
FASTENER LENGTH: 0.203 INCHES MAXIMUM
GRIP LENGTH: 0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.179 INCHES NOMINAL
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: ALUMINUM ALLOY 2117 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-W-7986 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
SHANK DIAMETER: 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
SHANK STYLE: D19 PULL THROUGH HOLLOW SHANK
SHEAR STRENGTH: 70 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENT: ANODIZE OR OXIDE FILM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
Related Searches:
MS20605AD3C2
RIVET,BLIND
NSN, MFG P/N
5320008117299
NSN
5320-00-811-7299
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
EXPANSION DEVICE: MANDREL-TYPE C
FASTENER LENGTH: 0.203 INCHES MAXIMUM
GRIP LENGTH: 0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.179 INCHES NOMINAL
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: ALUMINUM ALLOY 2117 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-W-7986 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
SHANK DIAMETER: 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
SHANK STYLE: D19 PULL THROUGH HOLLOW SHANK
SHEAR STRENGTH: 70 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENT: ANODIZE OR OXIDE FILM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
Related Searches:
MS20605B3C2
RIVET,BLIND
NSN, MFG P/N
5320008117299
NSN
5320-00-811-7299
MFG
BOSCH REXROTH GMBH LOHMANN STOLTER OHT
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
EXPANSION DEVICE: MANDREL-TYPE C
FASTENER LENGTH: 0.203 INCHES MAXIMUM
GRIP LENGTH: 0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.179 INCHES NOMINAL
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: ALUMINUM ALLOY 2117 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-W-7986 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
SHANK DIAMETER: 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
SHANK STYLE: D19 PULL THROUGH HOLLOW SHANK
SHEAR STRENGTH: 70 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENT: ANODIZE OR OXIDE FILM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
Related Searches:
352194
RIVET,TUBULAR
NSN, MFG P/N
5320008117776
NSN
5320-00-811-7776
MFG
UNITED TECHNOLOGIES CORPORATION DBA PRATT & WHITNEY DIV SPARES/SUPPORT EQUIPMENT
Description
DESIGN CONTROL REFERENCE: 352194
FASTENER LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
FEATURES PROVIDED: CASEHARDENED
HEAD HEIGHT: 0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.179 INCHES MINIMUM AND 0.197 INCHES MAXIMUM
HEAD STYLE: C28 UNIVERSAL
HOLE DEPTH: 0.160 INCHES MINIMUM AND 0.172 INCHES MAXIMUM
HOLE DIAMETER: ANY ACCEPTABLE
MANUFACTURERS CODE: 77445
MATERIAL: NICKEL OVERALL
SHANK DIAMETER: 0.093 INCHES MINIMUM AND 0.095 INCHES MAXIMUM
SHANK STYLE: D6 TUBULAR
SURFACE TREATMENT: ANY ACCEPTABLE OVERALL
THE MANUFACTURERS DATA:
Related Searches:
352194
RIVET,TUBULAR
NSN, MFG P/N
5320008117776
NSN
5320-00-811-7776
MFG
TURBO POWER & MARINE SYSTEM INC SUB OF UNITED TECHNOLOGIES CORP
Description
DESIGN CONTROL REFERENCE: 352194
FASTENER LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
FEATURES PROVIDED: CASEHARDENED
HEAD HEIGHT: 0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.179 INCHES MINIMUM AND 0.197 INCHES MAXIMUM
HEAD STYLE: C28 UNIVERSAL
HOLE DEPTH: 0.160 INCHES MINIMUM AND 0.172 INCHES MAXIMUM
HOLE DIAMETER: ANY ACCEPTABLE
MANUFACTURERS CODE: 77445
MATERIAL: NICKEL OVERALL
SHANK DIAMETER: 0.093 INCHES MINIMUM AND 0.095 INCHES MAXIMUM
SHANK STYLE: D6 TUBULAR
SURFACE TREATMENT: ANY ACCEPTABLE OVERALL
THE MANUFACTURERS DATA:
Related Searches:
AMS7232
RIVET,SOLID
NSN, MFG P/N
5320008117777
NSN
5320-00-811-7777
MFG
SOCIETY OF AUTOMOTIVE ENGINEERS INC
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN123304
FASTENER LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
GRIP LENGTH: 0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM
HEAD HEIGHT: 0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.119 INCHES MINIMUM AND 0.131 INCHES MAXIMUM
HEAD STYLE: C28 UNIVERSAL
MANUFACTURERS CODE: 88044
MATERIAL: NICKEL ALLOY 600 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 7232 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SHANK DIAMETER: 0.061 INCHES MINIMUM AND 0.063 INCHES MAXIMUM
SHANK STYLE: D9 STRAIGHT
SPEC/STD CONTROLLING DATA:
Related Searches:
AN123304
RIVET,SOLID
NSN, MFG P/N
5320008117777
NSN
5320-00-811-7777
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN123304
FASTENER LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
GRIP LENGTH: 0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM
HEAD HEIGHT: 0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.119 INCHES MINIMUM AND 0.131 INCHES MAXIMUM
HEAD STYLE: C28 UNIVERSAL
MANUFACTURERS CODE: 88044
MATERIAL: NICKEL ALLOY 600 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 7232 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SHANK DIAMETER: 0.061 INCHES MINIMUM AND 0.063 INCHES MAXIMUM
SHANK STYLE: D9 STRAIGHT
SPEC/STD CONTROLLING DATA:
Related Searches:
MS20426A8-28
RIVET,SOLID
NSN, MFG P/N
5320008118160
NSN
5320-00-811-8160
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
FASTENER LENGTH: 1.740 INCHES MINIMUM AND 1.760 INCHES MAXIMUM
GRIP LENGTH: 1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.472 INCHES MINIMUM AND 0.480 INCHES MAXIMUM
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: ALUMINUM ALLOY 1100 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SHANK DIAMETER: 0.249 INCHES MINIMUM AND 0.253 INCHES MAXIMUM
SHANK STYLE: D10 STRAIGHT W/RADIUS CHAMFERED TIP
Related Searches:
MS20426A8-28
RIVET,SOLID
NSN, MFG P/N
5320008118160
NSN
5320-00-811-8160
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
COUNTERSINK ANGLE: 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
FASTENER LENGTH: 1.740 INCHES MINIMUM AND 1.760 INCHES MAXIMUM
GRIP LENGTH: 1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.472 INCHES MINIMUM AND 0.480 INCHES MAXIMUM
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: ALUMINUM ALLOY 1100 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SHANK DIAMETER: 0.249 INCHES MINIMUM AND 0.253 INCHES MAXIMUM
SHANK STYLE: D10 STRAIGHT W/RADIUS CHAMFERED TIP
Related Searches:
MS20426D8-22
RIVET,SOLID
NSN, MFG P/N
5320008118161
NSN
5320-00-811-8161
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM
GRIP LENGTH: ANY ACCEPTABLE
HEAD MAJOR DIAMETER: 0.472 INCHES MINIMUM AND 0.480 INCHES MAXIMUM
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: ALUMINUM ALLOY 2017 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-430,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SHANK DIAMETER: 0.249 INCHES MINIMUM AND 0.253 INCHES MAXIMUM
SHANK STYLE: D10 STRAIGHT W/RADIUS CHAMFERED TIP
SURFACE TREATMENT: ANODIZE OVERALL
Related Searches:
MS20426D8-22
RIVET,SOLID
NSN, MFG P/N
5320008118161
NSN
5320-00-811-8161
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM
GRIP LENGTH: ANY ACCEPTABLE
HEAD MAJOR DIAMETER: 0.472 INCHES MINIMUM AND 0.480 INCHES MAXIMUM
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: ALUMINUM ALLOY 2017 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-430,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SHANK DIAMETER: 0.249 INCHES MINIMUM AND 0.253 INCHES MAXIMUM
SHANK STYLE: D10 STRAIGHT W/RADIUS CHAMFERED TIP
SURFACE TREATMENT: ANODIZE OVERALL
Related Searches:
FFA164-4
RIVET,BLIND
NSN, MFG P/N
5320008118413
NSN
5320-00-811-8413
MFG
ALCOA FASTENING SYSTEMS FAIRCHILD FA STENERS EUROPE - VSD GMBH
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
DESIGN CONTROL REFERENCE: FFA164-4
EXPANSION DEVICE: THREADED MANDREL
FASTENER LENGTH: 0.360 INCHES NOMINAL
GRIP LENGTH: 0.250 INCHES NOMINAL
HARDNESS RATING: 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM BOLT 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM NUT
HEAD HEIGHT: 0.067 INCHES MINIMUM AND 0.074 INCHES MAXIMUM
HEAD STYLE: C11 HEXAGON COUNTERSUNK
MANUFACTURERS CODE: 98524
MATERIAL: STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 BOLT ALUMINUM ALLOY 7075 NUT STEEL COMP 303 OR STEEL COMP 304 SLEEVE
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE BOLT QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE NUT ASTM A582 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5641 ASSN STD 1ST
SHANK DIAMETER: 0.163 INCHES MINIMUM AND 0.165 INCHES MAXIMUM
SHANK STYLE: D34 THREADED SELF-PLUGGING SHANK W/SLEEVE
SURFACE TREATMENT: CADMIUM AND CHROMATE BOLT ANODIZE NUT PASSIVATE OR CADMIUM SLEEVE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE BOLT MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE NUT QQ-P-35 FED SPEC 1ST TREATMENT RESPONSE AND QQ-P-416 TY 1 CL 3 FED SPEC 2ND TREATMENT RESPONSE SLEEVE
THE MANUFACTURERS DATA:
WIDTH ACROSS FLATS: 0.277 INCHES MINIMUM AND 0.283 INCHES MAXIMUM
~1: MATERIAL RESPONSE OR QQ-S-763 FED SPEC 2ND MATERIAL RESPONSE OR AMS 5639 ASSN STD 2ND MATERIAL RESPONSE SLEEVE