My Quote Request
5930-01-018-2788
20 Products
MTRF-2-35AT
SWITCH,REED
NSN, MFG P/N
5930010182788
NSN
5930-01-018-2788
MFG
HAMLIN INC
Description
BODY DIAMETER: 0.092 INCHES MAXIMUM
BODY LENGTH: 0.635 INCHES MAXIMUM
BODY STYLE: 1L UNCASED
CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE: 10.000 MILLIAMPERES RESISTIVE DC
MAXIMUM VOLTAGE RATING IN VOLTS: 28.0 DC
MOUNTING METHOD: TERMINAL
NONPILE-UP CONTACT ARRANGEMENT: 1 POLE, SINGLE THROW, BOTH POSITIONS MAINTAINED SINGLE SWITCH UNIT
SWITCH ACTUATING FORCE: 62.5 AMPERE-TURNS NOMINAL
SWITCH RELEASE FORCE: 27.5 AMPERE-TURNS NOMINAL
TERMINAL TYPE AND QUANTITY: 2 WIRE LEAD
Related Searches:
M3786/4-5361
SWITCH,ROTARY
NSN, MFG P/N
5930010182727
NSN
5930-01-018-2727
MFG
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
CONTACT LOAD CURRENT RATING: 75.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL 250.0 MILLIAMPERES RESISTIVE LOAD AND 100.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL
CONTACT SWITCHING ACTION: BREAKS BEFORE MAKES EACH SECTION REAR
CONTACT VOLTAGE RATING IN VOLTS: 115.0 AC AT SEA LEVEL 28.0 DC AT SEA LEVEL
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: M3786/4-5361
FIRST FLAT LENGTH: 0.250 INCHES NOMINAL SINGLE ACTUATOR
FLAT HEIGHT: 0.216 INCHES NOMINAL SINGLE ACTUATOR
III DETENT ROTATIONAL TORQUE RANGE: 1.000 TO 4.500 INCH-POUNDS SINGLE ACTUATOR
III HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION: EXPLOSION PROOF
III SHAFT FLAT/SLOT ANGULAR LOCATION: 216.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR
INDIVIDUAL SECTION QUANTITY: 2
MANUFACTURERS CODE: 81349
MOUNTING METHOD: THREADED BUSHING W/PANEL SEAL SINGLE MOUNTING FACILITY
NOMINAL THREAD SIZE: 0.375 INCHES SINGLE MOUNTING FACILITY
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MIL-DTL-3786/4
NONTURN DEVICE TYPE: SLOTTED BUSHING AT 3:00 O'CLOCK
OVERALL DIAMETER: 1.000 INCHES MINIMUM AND 1.306 INCHES MAXIMUM
OVERALL LENGTH: 2.245 INCHES NOMINAL
POLE QUANTITY: 2 EACH SECTION FRONT
ROTOR THROUGH CONNECTION QUANTITY: 2 EACH SECTION
SHAFT DIAMETER: 0.250 INCHES NOMINAL SINGLE ACTUATOR
SHAFT LENGTH: 0.437 INCHES NOMINAL SINGLE ACTUATOR
SHAFT TYPE: ROUND, FLATTED SINGLE ACTUATOR
SPEC/STD CONTROLLING DATA:
SPECIFICATION/STANDARD DATA: 81349-MIL-S-3786/4 GOVERNMENT SPECIFICATION
STYLE DESIGNATOR: 9 TAP, CIRCULAR, BUSHING MOUNT
SWITCH ACTUATOR INDEXING POSITION QUANTITY: 4 SINGLE ACTUATOR
SWITCH ACTUATOR POSITIONING INCREMENT: 36.0 DEGREES SINGLE ACTUATOR
SWITCH ACTUATOR STOP DEVICE TYPE: FIXED STOP SINGLE ACTUATOR
SWITCH CONTACT BASIC DESIGN: NONPILE-UP SYMMETRICAL
TERMINAL TYPE: TAB, SOLDER LUG
TEST DATA DOCUMENT: 81349-MIL-S-3786 SPECIFICATION
THREAD CLASS: 2A SINGLE MOUNTING FACILITY
THREAD LENGTH: 0.437 INCHES NOMINAL SINGLE MOUNTING FACILITY
THREAD SERIES DESIGNATOR: UNEF SINGLE MOUNTING FACILITY
THROW QUANTITY: 4 EACH SECTION REAR
Related Searches:
14X6
SWITCH,LIQUID LEVEL
NSN, MFG P/N
5930010182747
NSN
5930-01-018-2747
MFG
STERO DISHWASHING MACHINE MFG CO
Description
SWITCH,LIQUID LEVEL
Related Searches:
42854
SWITCH,FLOW
NSN, MFG P/N
5930010182749
NSN
5930-01-018-2749
MFG
GEMS SENSORS INC
Description
SWITCH,FLOW
Related Searches:
222-10NLM2222291
SWITCH,THERMOSTATIC
NSN, MFG P/N
5930010182776
NSN
5930-01-018-2776
MFG
DETROIT SWITCH INC.
Description
BODY HEIGHT: 2.750 INCHES NOMINAL
BULB DIAMETER: 0.688 INCHES NOMINAL
BULB LENGTH: 3.625 INCHES NOMINAL
CAPILLARY TUBE LENGTH: 120.0 INCHES NOMINAL
CONTACT ACTION STIMULUS: INCREASE
CONTACT ADJUSTABILITY: ACTUATION POINT ADJUSTABLE
CONTACT ADJUSTMENT RANGE: 60.00 TO 130.00 ACTUATION POINT DEGREES FAHRENHEIT
CONTACT ADJUSTMENT TYPE: EXTERNAL ACTUATION POINT SCREW
CONTACT LOAD CURRENT RATING: 16.0 AMPERES INDUCTIVE LOAD FIRST VOLTAGE 8.0 AMPERES INDUCTIVE LOAD SECOND VOLTAGE 4.0 AMPERES INDUCTIVE LOAD THIRD VOLTAGE 3.2 AMPERES INDUCTIVE LOAD FOURTH VOLTAGE 9.6 AMPERES INDUCTIVE LOAD FIFTH VOLTAGE 4.8 AMPERES INDUCTIVE LOAD SIXTH VOLTAGE 2.5
CONTACT VOLTAGE RATING IN VOLTS: 115.0 AC AT SEA LEVEL FIRST VOLTAGE 230.0 AC AT SEA LEVEL SECOND VOLTAGE 440.0 AC AT SEA LEVEL THIRD VOLTAGE 550.0 AC AT SEA LEVEL FOURTH VOLTAGE 115.0 DC AT SEA LEVEL FIFTH VOLTAGE 230.0 DC AT SEA LEVEL SIXTH VOLTAGE 440.0 DC AT SEA LEVEL SEVENTH VOLTAGE
FEATURES PROVIDED: ELECTRICAL ACCESS PORT
III HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION: DUSTPROOF AND VIBRATION RESISTANT AND WATERTIGHT
III PRECIOUS MATERIAL: SILVER
III PRECIOUS MATERIAL AND LOCATION: CONTACTS SILVER
LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS: 2.406 INCHES NOMINAL
LONGEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS: 3.281 INCHES NOMINAL
MEDIA FOR WHICH DESIGNED: GAS OR LIQUID
MOUNTING FACILITY PATTERN: ISOSCELES TRIANGLE
MOUNTING METHOD: BRACKET AND UNTHREADED HOLE
NONPILE-UP CONTACT ARRANGEMENT: 1 TWO CIRCUIT, DOUBLE BREAK/DOUBLE MAKE, ONE POSITION MOMENTARY
OVERALL HEIGHT: 5.687 INCHES NOMINAL
OVERALL LENGTH: 5.188 INCHES NOMINAL
OVERALL WIDTH: 2.812 INCHES NOMINAL
SHORTEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS: 0.656 INCHES NOMINAL
STYLE DESIGNATOR: 35 RECTANGULAR
TEMP SENSING ELEMENT TYPE: CAPILLARY TUBE-BULB
TERMINAL TYPE: SCREW
UNTHREADED MOUNTING HOLE DIAMETER: 0.281 INCHES NOMINAL
~1: 550.0 DC AT SEA LEVEL EIGHTH VOLTAGE
~1: AMPERES INDUCTIVE LOAD SEVENTH VOLTAGE 2.0 AMPERES INDUCTIVE LOAD EIGHTH VOLTAGE
Related Searches:
44MY231871-2-2N
SWITCH,ROTARY
NSN, MFG P/N
5930010182777
NSN
5930-01-018-2777
MFG
GRAYHILL INC
Description
CONTACT LOAD CURRENT RATING: 75.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL 250.0 MILLIAMPERES RESISTIVE LOAD AND 100.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL
CONTACT SWITCHING ACTION: BREAKS BEFORE MAKES SINGLE SECTION REAR
CONTACT VOLTAGE RATING IN VOLTS: 115.0 AC AT SEA LEVEL 28.0 DC AT SEA LEVEL
CRITICALITY CODE JUSTIFICATION: ZZZY
DESIGN CONTROL REFERENCE: 44MY231871-2-2N
FIRST FLAT LENGTH: 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM SINGLE ACTUATOR
FLAT HEIGHT: 0.215 INCHES MINIMUM AND 0.223 INCHES MAXIMUM SINGLE ACTUATOR
III HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION: EXPLOSION PROOF
III OPERATING TEMP RANGE: -65.0 TO 125.0 DEG CELSIUS
III SHAFT FLAT/SLOT ANGULAR LOCATION: 180.0 DEGREES FROM CONTACT POSITION 1 SINGLE ACTUATOR
INDIVIDUAL SECTION QUANTITY: 1
MANUFACTURERS CODE: 81073
MOUNTING METHOD: THREADED BUSHING SINGLE MOUNTING FACILITY
NOMINAL THREAD SIZE: 0.375 INCHES SINGLE MOUNTING FACILITY
NONTURN DEVICE RADIUS: 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM AT 3:00 O'CLOCK
NONTURN DEVICE TYPE: TAB AT 3:00 O'CLOCK
OVERALL DIAMETER: 1.155 INCHES MINIMUM AND 1.185 INCHES MAXIMUM
OVERALL LENGTH: 1.859 INCHES MINIMUM AND 1.985 INCHES MAXIMUM
POLE QUANTITY: 2 SINGLE SECTION FRONT
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: REFERENCE NUMBER DIFFERENTIATING MATERIAL WILL BE IN ACCORDANCE WITH NAVAL INVENTORY CONTROL POINT ACTIVITY HX QUALITY CONTROL. MANUFACTURING AND TESTING SPECIFICATIONS AVAILABLE AT THE DLA ICP
ROTOR THROUGH CONNECTION QUANTITY: 2 SINGLE SECTION
SHAFT DIAMETER: 0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM SINGLE ACTUATOR
SHAFT LENGTH: 0.834 INCHES MINIMUM AND 0.914 INCHES MAXIMUM SINGLE ACTUATOR
SHAFT TYPE: ROUND, FLATTED SINGLE ACTUATOR
SPECIAL FEATURES: ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER COLUMBUS PRODUCTION STANDARD NO. LO2065
STYLE DESIGNATOR: 9 TAP, CIRCULAR, BUSHING MOUNT
SWITCH ACTUATOR INDEXING POSITION QUANTITY: 2 SINGLE ACTUATOR
SWITCH ACTUATOR POSITIONING INCREMENT: 30.0 DEGREES SINGLE ACTUATOR
SWITCH ACTUATOR STOP DEVICE TYPE: FIXED STOP SINGLE ACTUATOR
SWITCH CONTACT BASIC DESIGN: NONPILE-UP SYMMETRICAL
TERMINAL TYPE: TAB, SOLDER LUG
THE MANUFACTURERS DATA:
THREAD CLASS: 2A SINGLE MOUNTING FACILITY
THREAD LENGTH: 0.417 INCHES MINIMUM AND 0.457 INCHES MAXIMUM SINGLE MOUNTING FACILITY
THREAD SERIES DESIGNATOR: UNEF SINGLE MOUNTING FACILITY
THROW QUANTITY: 2 SINGLE SECTION REAR
Related Searches:
LO2065
SWITCH,ROTARY
NSN, MFG P/N
5930010182777
NSN
5930-01-018-2777
MFG
DLA LAND AND MARITIME
Description
CONTACT LOAD CURRENT RATING: 75.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL 250.0 MILLIAMPERES RESISTIVE LOAD AND 100.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL
CONTACT SWITCHING ACTION: BREAKS BEFORE MAKES SINGLE SECTION REAR
CONTACT VOLTAGE RATING IN VOLTS: 115.0 AC AT SEA LEVEL 28.0 DC AT SEA LEVEL
CRITICALITY CODE JUSTIFICATION: ZZZY
DESIGN CONTROL REFERENCE: 44MY231871-2-2N
FIRST FLAT LENGTH: 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM SINGLE ACTUATOR
FLAT HEIGHT: 0.215 INCHES MINIMUM AND 0.223 INCHES MAXIMUM SINGLE ACTUATOR
III HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION: EXPLOSION PROOF
III OPERATING TEMP RANGE: -65.0 TO 125.0 DEG CELSIUS
III SHAFT FLAT/SLOT ANGULAR LOCATION: 180.0 DEGREES FROM CONTACT POSITION 1 SINGLE ACTUATOR
INDIVIDUAL SECTION QUANTITY: 1
MANUFACTURERS CODE: 81073
MOUNTING METHOD: THREADED BUSHING SINGLE MOUNTING FACILITY
NOMINAL THREAD SIZE: 0.375 INCHES SINGLE MOUNTING FACILITY
NONTURN DEVICE RADIUS: 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM AT 3:00 O'CLOCK
NONTURN DEVICE TYPE: TAB AT 3:00 O'CLOCK
OVERALL DIAMETER: 1.155 INCHES MINIMUM AND 1.185 INCHES MAXIMUM
OVERALL LENGTH: 1.859 INCHES MINIMUM AND 1.985 INCHES MAXIMUM
POLE QUANTITY: 2 SINGLE SECTION FRONT
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: REFERENCE NUMBER DIFFERENTIATING MATERIAL WILL BE IN ACCORDANCE WITH NAVAL INVENTORY CONTROL POINT ACTIVITY HX QUALITY CONTROL. MANUFACTURING AND TESTING SPECIFICATIONS AVAILABLE AT THE DLA ICP
ROTOR THROUGH CONNECTION QUANTITY: 2 SINGLE SECTION
SHAFT DIAMETER: 0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM SINGLE ACTUATOR
SHAFT LENGTH: 0.834 INCHES MINIMUM AND 0.914 INCHES MAXIMUM SINGLE ACTUATOR
SHAFT TYPE: ROUND, FLATTED SINGLE ACTUATOR
SPECIAL FEATURES: ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER COLUMBUS PRODUCTION STANDARD NO. LO2065
STYLE DESIGNATOR: 9 TAP, CIRCULAR, BUSHING MOUNT
SWITCH ACTUATOR INDEXING POSITION QUANTITY: 2 SINGLE ACTUATOR
SWITCH ACTUATOR POSITIONING INCREMENT: 30.0 DEGREES SINGLE ACTUATOR
SWITCH ACTUATOR STOP DEVICE TYPE: FIXED STOP SINGLE ACTUATOR
SWITCH CONTACT BASIC DESIGN: NONPILE-UP SYMMETRICAL
TERMINAL TYPE: TAB, SOLDER LUG
THE MANUFACTURERS DATA:
THREAD CLASS: 2A SINGLE MOUNTING FACILITY
THREAD LENGTH: 0.417 INCHES MINIMUM AND 0.457 INCHES MAXIMUM SINGLE MOUNTING FACILITY
THREAD SERIES DESIGNATOR: UNEF SINGLE MOUNTING FACILITY
THROW QUANTITY: 2 SINGLE SECTION REAR
Related Searches:
44MY231877-3-04N
SWITCH,ROTARY
NSN, MFG P/N
5930010182778
NSN
5930-01-018-2778
MFG
GRAYHILL INC
Description
CONTACT LOAD CURRENT RATING: 750.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL 250.0 MILLIAMPERES RESISTIVE LOAD AND 100.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL
CONTACT SWITCHING ACTION: BREAKS BEFORE MAKES EACH SECTION REAR
CONTACT VOLTAGE RATING IN VOLTS: 115.0 AC AT SEA LEVEL 28.0 DC AT SEA LEVEL
FIRST FLAT LENGTH: 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM SINGLE ACTUATOR
FLAT HEIGHT: 0.215 INCHES MINIMUM AND 0.223 INCHES MAXIMUM SINGLE ACTUATOR
III DETENT ROTATIONAL TORQUE RANGE: 8.000 TO 115.000 INCH-OUNCES SINGLE ACTUATOR
III HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION: EXPLOSION PROOF
III OPERATING TEMP RANGE: -65.0 TO 125.0 DEG CELSIUS
III SHAFT FLAT/SLOT ANGULAR LOCATION: 195.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR
INDIVIDUAL SECTION QUANTITY: 7
MOUNTING METHOD: THREADED BUSHING SINGLE MOUNTING FACILITY
NOMINAL THREAD SIZE: 0.375 INCHES SINGLE MOUNTING FACILITY
NONTURN DEVICE RADIUS: 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM AT 3:00 O'CLOCK
NONTURN DEVICE TYPE: TAB AT 3:00 O'CLOCK
OVERALL DIAMETER: 1.155 INCHES MINIMUM AND 1.185 INCHES MAXIMUM
OVERALL LENGTH: 4.085 INCHES MINIMUM AND 5.311 INCHES MAXIMUM
POLE QUANTITY: 3 EACH SECTION FRONT
ROTOR THROUGH CONNECTION QUANTITY: 3 EACH SECTION
SHAFT DIAMETER: 0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM SINGLE ACTUATOR
SHAFT LENGTH: 0.834 INCHES MINIMUM AND 0.914 INCHES MAXIMUM SINGLE ACTUATOR
SHAFT TYPE: ROUND, FLATTED SINGLE ACTUATOR
STYLE DESIGNATOR: 9 TAP, CIRCULAR, BUSHING MOUNT
SWITCH ACTUATOR INDEXING POSITION QUANTITY: 12 SINGLE ACTUATOR
SWITCH ACTUATOR POSITIONING INCREMENT: 30.0 DEGREES SINGLE ACTUATOR
SWITCH CONTACT BASIC DESIGN: NONPILE-UP SYMMETRICAL
TERMINAL TYPE: TAB, SOLDER LUG
THREAD CLASS: 2A SINGLE MOUNTING FACILITY
THREAD LENGTH: 0.417 INCHES MINIMUM AND 0.457 INCHES MAXIMUM SINGLE MOUNTING FACILITY
THREAD SERIES DESIGNATOR: UNEF SINGLE MOUNTING FACILITY
THROW QUANTITY: 4 EACH SECTION REAR
Related Searches:
42HS36-05-1-4N
SWITCH,ROTARY
NSN, MFG P/N
5930010182779
NSN
5930-01-018-2779
MFG
GRAYHILL INC
Description
CONTACT LOAD CURRENT RATING: 75.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL 250.0 MILLIAMPERES RESISTIVE LOAD AND 100.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL
CONTACT SWITCHING ACTION: BREAKS BEFORE MAKES EACH SECTION REAR
CONTACT VOLTAGE RATING IN VOLTS: 115.0 AC AT SEA LEVEL 28.0 DC AT SEA LEVEL
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: M3786/4-5391
FIRST FLAT LENGTH: 0.250 INCHES NOMINAL SINGLE ACTUATOR
FLAT HEIGHT: 0.216 INCHES NOMINAL SINGLE ACTUATOR
III DETENT ROTATIONAL TORQUE RANGE: 1.000 TO 4.500 INCH-POUNDS SINGLE ACTUATOR
III HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION: EXPLOSION PROOF
III OPERATING TEMP RANGE: -65.0 TO 125.0 DEG CELSIUS
III SHAFT FLAT/SLOT ANGULAR LOCATION: 216.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR
INDIVIDUAL SECTION QUANTITY: 5
MANUFACTURERS CODE: 81349
MOUNTING METHOD: THREADED BUSHING W/PANEL SEAL SINGLE MOUNTING FACILITY
NOMINAL THREAD SIZE: 0.375 INCHES SINGLE MOUNTING FACILITY
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MIL-DTL-3786/4
NONTURN DEVICE TYPE: SLOTTED BUSHING AT 3:00 O'CLOCK
OVERALL DIAMETER: 1.000 INCHES MINIMUM AND 1.306 INCHES MAXIMUM
OVERALL LENGTH: 3.283 INCHES NOMINAL
POLE QUANTITY: 1 EACH SECTION FRONT
ROTOR THROUGH CONNECTION QUANTITY: 1 EACH SECTION
SHAFT DIAMETER: 0.250 INCHES NOMINAL SINGLE ACTUATOR
SHAFT LENGTH: 0.437 INCHES NOMINAL SINGLE ACTUATOR
SHAFT TYPE: ROUND, FLATTED SINGLE ACTUATOR
SPEC/STD CONTROLLING DATA:
SPECIFICATION/STANDARD DATA: 81349-MIL-S-3786/4 GOVERNMENT SPECIFICATION
STYLE DESIGNATOR: 9 TAP, CIRCULAR, BUSHING MOUNT
SWITCH ACTUATOR INDEXING POSITION QUANTITY: 4 SINGLE ACTUATOR
SWITCH ACTUATOR POSITIONING INCREMENT: 36.0 DEGREES SINGLE ACTUATOR
SWITCH ACTUATOR STOP DEVICE TYPE: FIXED STOP SINGLE ACTUATOR
SWITCH CONTACT BASIC DESIGN: NONPILE-UP SYMMETRICAL
TERMINAL TYPE: TAB, SOLDER LUG
TEST DATA DOCUMENT: 81349-MIL-S-3786 SPECIFICATION
THREAD CLASS: 2A SINGLE MOUNTING FACILITY
THREAD LENGTH: 0.437 INCHES NOMINAL SINGLE MOUNTING FACILITY
THREAD SERIES DESIGNATOR: UNEF SINGLE MOUNTING FACILITY
THROW QUANTITY: 4 EACH SECTION REAR
Related Searches:
4M36F1-5N4
SWITCH,ROTARY
NSN, MFG P/N
5930010182779
NSN
5930-01-018-2779
MFG
JANCO CORPORATION DBA ESTERLINE MASON
Description
CONTACT LOAD CURRENT RATING: 75.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL 250.0 MILLIAMPERES RESISTIVE LOAD AND 100.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL
CONTACT SWITCHING ACTION: BREAKS BEFORE MAKES EACH SECTION REAR
CONTACT VOLTAGE RATING IN VOLTS: 115.0 AC AT SEA LEVEL 28.0 DC AT SEA LEVEL
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: M3786/4-5391
FIRST FLAT LENGTH: 0.250 INCHES NOMINAL SINGLE ACTUATOR
FLAT HEIGHT: 0.216 INCHES NOMINAL SINGLE ACTUATOR
III DETENT ROTATIONAL TORQUE RANGE: 1.000 TO 4.500 INCH-POUNDS SINGLE ACTUATOR
III HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION: EXPLOSION PROOF
III OPERATING TEMP RANGE: -65.0 TO 125.0 DEG CELSIUS
III SHAFT FLAT/SLOT ANGULAR LOCATION: 216.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR
INDIVIDUAL SECTION QUANTITY: 5
MANUFACTURERS CODE: 81349
MOUNTING METHOD: THREADED BUSHING W/PANEL SEAL SINGLE MOUNTING FACILITY
NOMINAL THREAD SIZE: 0.375 INCHES SINGLE MOUNTING FACILITY
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MIL-DTL-3786/4
NONTURN DEVICE TYPE: SLOTTED BUSHING AT 3:00 O'CLOCK
OVERALL DIAMETER: 1.000 INCHES MINIMUM AND 1.306 INCHES MAXIMUM
OVERALL LENGTH: 3.283 INCHES NOMINAL
POLE QUANTITY: 1 EACH SECTION FRONT
ROTOR THROUGH CONNECTION QUANTITY: 1 EACH SECTION
SHAFT DIAMETER: 0.250 INCHES NOMINAL SINGLE ACTUATOR
SHAFT LENGTH: 0.437 INCHES NOMINAL SINGLE ACTUATOR
SHAFT TYPE: ROUND, FLATTED SINGLE ACTUATOR
SPEC/STD CONTROLLING DATA:
SPECIFICATION/STANDARD DATA: 81349-MIL-S-3786/4 GOVERNMENT SPECIFICATION
STYLE DESIGNATOR: 9 TAP, CIRCULAR, BUSHING MOUNT
SWITCH ACTUATOR INDEXING POSITION QUANTITY: 4 SINGLE ACTUATOR
SWITCH ACTUATOR POSITIONING INCREMENT: 36.0 DEGREES SINGLE ACTUATOR
SWITCH ACTUATOR STOP DEVICE TYPE: FIXED STOP SINGLE ACTUATOR
SWITCH CONTACT BASIC DESIGN: NONPILE-UP SYMMETRICAL
TERMINAL TYPE: TAB, SOLDER LUG
TEST DATA DOCUMENT: 81349-MIL-S-3786 SPECIFICATION
THREAD CLASS: 2A SINGLE MOUNTING FACILITY
THREAD LENGTH: 0.437 INCHES NOMINAL SINGLE MOUNTING FACILITY
THREAD SERIES DESIGNATOR: UNEF SINGLE MOUNTING FACILITY
THROW QUANTITY: 4 EACH SECTION REAR
Related Searches:
M3786/4-5391
SWITCH,ROTARY
NSN, MFG P/N
5930010182779
NSN
5930-01-018-2779
MFG
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
CONTACT LOAD CURRENT RATING: 75.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL 250.0 MILLIAMPERES RESISTIVE LOAD AND 100.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL
CONTACT SWITCHING ACTION: BREAKS BEFORE MAKES EACH SECTION REAR
CONTACT VOLTAGE RATING IN VOLTS: 115.0 AC AT SEA LEVEL 28.0 DC AT SEA LEVEL
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: M3786/4-5391
FIRST FLAT LENGTH: 0.250 INCHES NOMINAL SINGLE ACTUATOR
FLAT HEIGHT: 0.216 INCHES NOMINAL SINGLE ACTUATOR
III DETENT ROTATIONAL TORQUE RANGE: 1.000 TO 4.500 INCH-POUNDS SINGLE ACTUATOR
III HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION: EXPLOSION PROOF
III OPERATING TEMP RANGE: -65.0 TO 125.0 DEG CELSIUS
III SHAFT FLAT/SLOT ANGULAR LOCATION: 216.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR
INDIVIDUAL SECTION QUANTITY: 5
MANUFACTURERS CODE: 81349
MOUNTING METHOD: THREADED BUSHING W/PANEL SEAL SINGLE MOUNTING FACILITY
NOMINAL THREAD SIZE: 0.375 INCHES SINGLE MOUNTING FACILITY
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MIL-DTL-3786/4
NONTURN DEVICE TYPE: SLOTTED BUSHING AT 3:00 O'CLOCK
OVERALL DIAMETER: 1.000 INCHES MINIMUM AND 1.306 INCHES MAXIMUM
OVERALL LENGTH: 3.283 INCHES NOMINAL
POLE QUANTITY: 1 EACH SECTION FRONT
ROTOR THROUGH CONNECTION QUANTITY: 1 EACH SECTION
SHAFT DIAMETER: 0.250 INCHES NOMINAL SINGLE ACTUATOR
SHAFT LENGTH: 0.437 INCHES NOMINAL SINGLE ACTUATOR
SHAFT TYPE: ROUND, FLATTED SINGLE ACTUATOR
SPEC/STD CONTROLLING DATA:
SPECIFICATION/STANDARD DATA: 81349-MIL-S-3786/4 GOVERNMENT SPECIFICATION
STYLE DESIGNATOR: 9 TAP, CIRCULAR, BUSHING MOUNT
SWITCH ACTUATOR INDEXING POSITION QUANTITY: 4 SINGLE ACTUATOR
SWITCH ACTUATOR POSITIONING INCREMENT: 36.0 DEGREES SINGLE ACTUATOR
SWITCH ACTUATOR STOP DEVICE TYPE: FIXED STOP SINGLE ACTUATOR
SWITCH CONTACT BASIC DESIGN: NONPILE-UP SYMMETRICAL
TERMINAL TYPE: TAB, SOLDER LUG
TEST DATA DOCUMENT: 81349-MIL-S-3786 SPECIFICATION
THREAD CLASS: 2A SINGLE MOUNTING FACILITY
THREAD LENGTH: 0.437 INCHES NOMINAL SINGLE MOUNTING FACILITY
THREAD SERIES DESIGNATOR: UNEF SINGLE MOUNTING FACILITY
THROW QUANTITY: 4 EACH SECTION REAR
Related Searches:
168312-13
SWITCH,ROTARY
NSN, MFG P/N
5930010182780
NSN
5930-01-018-2780
MFG
RAYTHEON COMPANY DBA RAYTHEON
Description
CONTACT LOAD CURRENT RATING: 250.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL 250.0 MILLIAMPERES RESISTIVE LOAD DC AT SEA LEVEL
CONTACT SWITCHING ACTION: BREAKS BEFORE MAKES SINGLE SECTION REAR
CONTACT VOLTAGE RATING IN VOLTS: 115.0 AC AT SEA LEVEL 28.0 DC AT SEA LEVEL
FEATURES PROVIDED: METALLIC INCLOSURE
FIRST FLAT LENGTH: 0.573 INCHES MINIMUM AND 0.583 INCHES MAXIMUM SINGLE ACTUATOR
FLAT HEIGHT: 0.091 INCHES MINIMUM AND 0.095 INCHES MAXIMUM SINGLE ACTUATOR
III DETENT ROTATIONAL TORQUE RANGE: 10.000 TO 15.000 INCH-OUNCES SINGLE ACTUATOR
III HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION: EXPLOSION PROOF
III OPERATING TEMP RANGE: -55.0 TO 125.0 DEG CELSIUS
III SHAFT FLAT/SLOT ANGULAR LOCATION: 0.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR
INDIVIDUAL SECTION QUANTITY: 1
MOUNTING METHOD: THREADED BUSHING SINGLE MOUNTING FACILITY
NOMINAL THREAD SIZE: 0.250 INCHES SINGLE MOUNTING FACILITY
NONTURN DEVICE TYPE: FLATTED BUSHING AT 3:00 O'CLOCK
OVERALL DIAMETER: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM
OVERALL LENGTH: 1.541 INCHES NOMINAL
POLE QUANTITY: 1 SINGLE SECTION REAR
SHAFT DIAMETER: 0.123 INCHES MINIMUM AND 0.125 INCHES MAXIMUM SINGLE ACTUATOR
SHAFT LENGTH: 0.604 INCHES NOMINAL SINGLE ACTUATOR
SHAFT TYPE: ROUND, FLATTED SINGLE ACTUATOR
STYLE DESIGNATOR: 9 TAP, CIRCULAR, BUSHING MOUNT
SWITCH ACTUATOR INDEXING POSITION QUANTITY: 2 SINGLE ACTUATOR
SWITCH ACTUATOR POSITIONING INCREMENT: 30.0 DEGREES SINGLE ACTUATOR
SWITCH ACTUATOR STOP DEVICE TYPE: FIXED STOP SINGLE ACTUATOR
SWITCH CONTACT BASIC DESIGN: NONPILE-UP SYMMETRICAL
TERMINAL TYPE: TAB, SOLDER LUG
THREAD CLASS: 2A SINGLE MOUNTING FACILITY
THREAD LENGTH: 0.234 INCHES MINIMUM AND 0.264 INCHES MAXIMUM SINGLE MOUNTING FACILITY
THREAD SERIES DESIGNATOR: UNF SINGLE MOUNTING FACILITY
THROW QUANTITY: 2 SINGLE SECTION REAR
Related Searches:
SPEC12066
SWITCH,ROTARY
NSN, MFG P/N
5930010182780
NSN
5930-01-018-2780
MFG
SHALLCO INC.
Description
CONTACT LOAD CURRENT RATING: 250.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL 250.0 MILLIAMPERES RESISTIVE LOAD DC AT SEA LEVEL
CONTACT SWITCHING ACTION: BREAKS BEFORE MAKES SINGLE SECTION REAR
CONTACT VOLTAGE RATING IN VOLTS: 115.0 AC AT SEA LEVEL 28.0 DC AT SEA LEVEL
FEATURES PROVIDED: METALLIC INCLOSURE
FIRST FLAT LENGTH: 0.573 INCHES MINIMUM AND 0.583 INCHES MAXIMUM SINGLE ACTUATOR
FLAT HEIGHT: 0.091 INCHES MINIMUM AND 0.095 INCHES MAXIMUM SINGLE ACTUATOR
III DETENT ROTATIONAL TORQUE RANGE: 10.000 TO 15.000 INCH-OUNCES SINGLE ACTUATOR
III HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION: EXPLOSION PROOF
III OPERATING TEMP RANGE: -55.0 TO 125.0 DEG CELSIUS
III SHAFT FLAT/SLOT ANGULAR LOCATION: 0.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR
INDIVIDUAL SECTION QUANTITY: 1
MOUNTING METHOD: THREADED BUSHING SINGLE MOUNTING FACILITY
NOMINAL THREAD SIZE: 0.250 INCHES SINGLE MOUNTING FACILITY
NONTURN DEVICE TYPE: FLATTED BUSHING AT 3:00 O'CLOCK
OVERALL DIAMETER: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM
OVERALL LENGTH: 1.541 INCHES NOMINAL
POLE QUANTITY: 1 SINGLE SECTION REAR
SHAFT DIAMETER: 0.123 INCHES MINIMUM AND 0.125 INCHES MAXIMUM SINGLE ACTUATOR
SHAFT LENGTH: 0.604 INCHES NOMINAL SINGLE ACTUATOR
SHAFT TYPE: ROUND, FLATTED SINGLE ACTUATOR
STYLE DESIGNATOR: 9 TAP, CIRCULAR, BUSHING MOUNT
SWITCH ACTUATOR INDEXING POSITION QUANTITY: 2 SINGLE ACTUATOR
SWITCH ACTUATOR POSITIONING INCREMENT: 30.0 DEGREES SINGLE ACTUATOR
SWITCH ACTUATOR STOP DEVICE TYPE: FIXED STOP SINGLE ACTUATOR
SWITCH CONTACT BASIC DESIGN: NONPILE-UP SYMMETRICAL
TERMINAL TYPE: TAB, SOLDER LUG
THREAD CLASS: 2A SINGLE MOUNTING FACILITY
THREAD LENGTH: 0.234 INCHES MINIMUM AND 0.264 INCHES MAXIMUM SINGLE MOUNTING FACILITY
THREAD SERIES DESIGNATOR: UNF SINGLE MOUNTING FACILITY
THROW QUANTITY: 2 SINGLE SECTION REAR
Related Searches:
78A0087-001
SWITCH,TOGGLE
NSN, MFG P/N
5930010182784
NSN
5930-01-018-2784
MFG
UNISYS CORP FEDERAL SYSTEMS DIV
Description
ACTUATOR COLOR: WHITE SINGLE ACTUATOR
ACTUATOR HEIGHT: 1.270 INCHES MINIMUM AND 1.350 INCHES MAXIMUM
ACTUATOR POSITION-ACTION RELATIONSHIP: UP POSITION MAINTAINED AND DOWN POSITION MAINTAINED
ACTUATOR STYLE: 29 RECTANGULAR
ACTUATOR WIDTH: 0.648 INCHES MINIMUM AND 0.664 INCHES MAXIMUM
BODY LENGTH: 1.333 INCHES MINIMUM AND 1.353 INCHES MAXIMUM
BODY STYLE: 16P HOLE MOUNT
BODY WIDTH: 0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 1.615 INCHES MINIMUM AND 1.635 INCHES MAXIMUM
CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE: 3.000 AMPERES RESISTIVE AC
INCLOSURE TYPE: FULLY INCLOSED
MAXIMUM VOLTAGE RATING IN VOLTS: 250.0 AC
MOUNTING METHOD: UNTHREADED HOLE
NONPILE-UP CONTACT ARRANGEMENT: 1 POLE, DOUBLE THROW, BOTH POSITIONS MAINTAINED SINGLE SWITCH UNIT
TERMINAL TYPE AND QUANTITY: 3 TAB, SOLDER LUG
UNTHREADED MOUNTING HOLE DIAMETER: 0.144 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
Related Searches:
8931K186
SWITCH,TOGGLE
NSN, MFG P/N
5930010182784
NSN
5930-01-018-2784
MFG
EDO CORP DIV EDO CORPORATION ANTENNA PRODUCTS & TECHNOLOGIES
Description
ACTUATOR COLOR: WHITE SINGLE ACTUATOR
ACTUATOR HEIGHT: 1.270 INCHES MINIMUM AND 1.350 INCHES MAXIMUM
ACTUATOR POSITION-ACTION RELATIONSHIP: UP POSITION MAINTAINED AND DOWN POSITION MAINTAINED
ACTUATOR STYLE: 29 RECTANGULAR
ACTUATOR WIDTH: 0.648 INCHES MINIMUM AND 0.664 INCHES MAXIMUM
BODY LENGTH: 1.333 INCHES MINIMUM AND 1.353 INCHES MAXIMUM
BODY STYLE: 16P HOLE MOUNT
BODY WIDTH: 0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 1.615 INCHES MINIMUM AND 1.635 INCHES MAXIMUM
CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE: 3.000 AMPERES RESISTIVE AC
INCLOSURE TYPE: FULLY INCLOSED
MAXIMUM VOLTAGE RATING IN VOLTS: 250.0 AC
MOUNTING METHOD: UNTHREADED HOLE
NONPILE-UP CONTACT ARRANGEMENT: 1 POLE, DOUBLE THROW, BOTH POSITIONS MAINTAINED SINGLE SWITCH UNIT
TERMINAL TYPE AND QUANTITY: 3 TAB, SOLDER LUG
UNTHREADED MOUNTING HOLE DIAMETER: 0.144 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
Related Searches:
78A0087-002
SWITCH,TOGGLE
NSN, MFG P/N
5930010182785
NSN
5930-01-018-2785
MFG
UNISYS CORP FEDERAL SYSTEMS DIV
Description
ACTUATOR COLOR: WHITE SINGLE ACTUATOR
ACTUATOR HEIGHT: 1.270 INCHES MINIMUM AND 1.350 INCHES MAXIMUM
ACTUATOR POSITION-ACTION RELATIONSHIP: UP POSITION MOMENTARY AND DOWN POSITION MAINTAINED
ACTUATOR STYLE: 29 RECTANGULAR
ACTUATOR WIDTH: 0.648 INCHES MINIMUM AND 0.664 INCHES MAXIMUM
BODY LENGTH: 1.333 INCHES MINIMUM AND 1.353 INCHES MAXIMUM
BODY STYLE: 16P HOLE MOUNT
BODY WIDTH: 0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 1.615 INCHES MINIMUM AND 1.635 INCHES MAXIMUM
CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE: 3.000 AMPERES RESISTIVE AC
INCLOSURE TYPE: FULLY INCLOSED
MAXIMUM VOLTAGE RATING IN VOLTS: 250.0 AC
MOUNTING METHOD: UNTHREADED HOLE
NONPILE-UP CONTACT ARRANGEMENT: 1 POLE, DOUBLE THROW, ONE POSITION MOMENTARY SINGLE SWITCH UNIT
TERMINAL TYPE AND QUANTITY: 3 TAB, SOLDER LUG
UNTHREADED MOUNTING HOLE DIAMETER: 0.144 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
Related Searches:
8931K187
SWITCH,TOGGLE
NSN, MFG P/N
5930010182785
NSN
5930-01-018-2785
MFG
EDO CORP DIV EDO CORPORATION ANTENNA PRODUCTS & TECHNOLOGIES
Description
ACTUATOR COLOR: WHITE SINGLE ACTUATOR
ACTUATOR HEIGHT: 1.270 INCHES MINIMUM AND 1.350 INCHES MAXIMUM
ACTUATOR POSITION-ACTION RELATIONSHIP: UP POSITION MOMENTARY AND DOWN POSITION MAINTAINED
ACTUATOR STYLE: 29 RECTANGULAR
ACTUATOR WIDTH: 0.648 INCHES MINIMUM AND 0.664 INCHES MAXIMUM
BODY LENGTH: 1.333 INCHES MINIMUM AND 1.353 INCHES MAXIMUM
BODY STYLE: 16P HOLE MOUNT
BODY WIDTH: 0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 1.615 INCHES MINIMUM AND 1.635 INCHES MAXIMUM
CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE: 3.000 AMPERES RESISTIVE AC
INCLOSURE TYPE: FULLY INCLOSED
MAXIMUM VOLTAGE RATING IN VOLTS: 250.0 AC
MOUNTING METHOD: UNTHREADED HOLE
NONPILE-UP CONTACT ARRANGEMENT: 1 POLE, DOUBLE THROW, ONE POSITION MOMENTARY SINGLE SWITCH UNIT
TERMINAL TYPE AND QUANTITY: 3 TAB, SOLDER LUG
UNTHREADED MOUNTING HOLE DIAMETER: 0.144 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
Related Searches:
78A0087-003
SWITCH,TOGGLE
NSN, MFG P/N
5930010182786
NSN
5930-01-018-2786
MFG
UNISYS CORP FEDERAL SYSTEMS DIV
Description
ACTUATOR COLOR: WHITE SINGLE ACTUATOR
ACTUATOR HEIGHT: 1.270 INCHES MINIMUM AND 1.350 INCHES MAXIMUM
ACTUATOR POSITION-ACTION RELATIONSHIP: UP POSITION MOMENTARY AND UP POSITION MAINTAINED
ACTUATOR STYLE: 29 RECTANGULAR
ACTUATOR WIDTH: 0.455 INCHES MINIMUM AND 0.475 INCHES MAXIMUM
BODY LENGTH: 1.333 INCHES MINIMUM AND 1.353 INCHES MAXIMUM
BODY STYLE: 16P HOLE MOUNT
BODY WIDTH: 0.677 INCHES MINIMUM AND 0.697 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 1.615 INCHES MINIMUM AND 1.635 INCHES MAXIMUM
CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE: 3.000 AMPERES RESISTIVE AC
INCLOSURE TYPE: FULLY INCLOSED
MAXIMUM VOLTAGE RATING IN VOLTS: 250.0 AC
MOUNTING METHOD: UNTHREADED HOLE
NONPILE-UP CONTACT ARRANGEMENT: 1 POLE, DOUBLE THROW, ONE POSITION MOMENTARY SINGLE SWITCH UNIT
TERMINAL TYPE AND QUANTITY: 3 TAB, SOLDER LUG
UNTHREADED MOUNTING HOLE DIAMETER: 0.144 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
Related Searches:
8931K268
SWITCH,TOGGLE
NSN, MFG P/N
5930010182786
NSN
5930-01-018-2786
MFG
EDO CORP DIV EDO CORPORATION ANTENNA PRODUCTS & TECHNOLOGIES
Description
ACTUATOR COLOR: WHITE SINGLE ACTUATOR
ACTUATOR HEIGHT: 1.270 INCHES MINIMUM AND 1.350 INCHES MAXIMUM
ACTUATOR POSITION-ACTION RELATIONSHIP: UP POSITION MOMENTARY AND UP POSITION MAINTAINED
ACTUATOR STYLE: 29 RECTANGULAR
ACTUATOR WIDTH: 0.455 INCHES MINIMUM AND 0.475 INCHES MAXIMUM
BODY LENGTH: 1.333 INCHES MINIMUM AND 1.353 INCHES MAXIMUM
BODY STYLE: 16P HOLE MOUNT
BODY WIDTH: 0.677 INCHES MINIMUM AND 0.697 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 1.615 INCHES MINIMUM AND 1.635 INCHES MAXIMUM
CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE: 3.000 AMPERES RESISTIVE AC
INCLOSURE TYPE: FULLY INCLOSED
MAXIMUM VOLTAGE RATING IN VOLTS: 250.0 AC
MOUNTING METHOD: UNTHREADED HOLE
NONPILE-UP CONTACT ARRANGEMENT: 1 POLE, DOUBLE THROW, ONE POSITION MOMENTARY SINGLE SWITCH UNIT
TERMINAL TYPE AND QUANTITY: 3 TAB, SOLDER LUG
UNTHREADED MOUNTING HOLE DIAMETER: 0.144 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
Related Searches:
161-5001-001
SWITCH,REED
NSN, MFG P/N
5930010182788
NSN
5930-01-018-2788
MFG
EATON CORP ELECTRONIC INSTRUMENTATION DIV LOS ANGELES PLANT
Description
BODY DIAMETER: 0.092 INCHES MAXIMUM
BODY LENGTH: 0.635 INCHES MAXIMUM
BODY STYLE: 1L UNCASED
CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE: 10.000 MILLIAMPERES RESISTIVE DC
MAXIMUM VOLTAGE RATING IN VOLTS: 28.0 DC
MOUNTING METHOD: TERMINAL
NONPILE-UP CONTACT ARRANGEMENT: 1 POLE, SINGLE THROW, BOTH POSITIONS MAINTAINED SINGLE SWITCH UNIT
SWITCH ACTUATING FORCE: 62.5 AMPERE-TURNS NOMINAL
SWITCH RELEASE FORCE: 27.5 AMPERE-TURNS NOMINAL
TERMINAL TYPE AND QUANTITY: 2 WIRE LEAD