My Quote Request
5935-00-296-8390
20 Products
JK-37
JACK,TELEPHONE
NSN, MFG P/N
5935002968390
NSN
5935-00-296-8390
MFG
US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR
Description
ACCOMMODATED FINGER TYPE: TWO CONDUCTOR, ROUND TIP ALL FINGERS
CURRENT RATING IN AMPS: NOT RATED
ELECTRICAL INSULATION FEATURE: INSULATED COMPLETELY
FINGER ACCOMMODATION DIAMETER: 0.242 INCHES NOMINAL ALL FINGERS
FINGER ACCOMMODATION LENGTH: 0.750 INCHES NOMINAL ALL FINGERS
JACK CONTACT ARRANGEMENT DESIGNATOR: J1
MATERIAL: PLASTIC BODY PLASTIC INSULATOR ANY ACCEPTABLE SPRING ANY ACCEPTABLE TERMINAL
MAXIMUM VOLTAGE RATING IN VOLTS: NOT RATED
SURFACE TREATMENT: ANY ACCEPTABLE SPRING ANY ACCEPTABLE TERMINAL
TERMINAL TYPE: TAB, SOLDER LUG
Related Searches:
JANJ641TYPEJJ
JACK,TELEPHONE
NSN, MFG P/N
5935002968390
NSN
5935-00-296-8390
MFG
JOINT ELECTRONICS TYPE DESIGNATION SYSTEM
Description
ACCOMMODATED FINGER TYPE: TWO CONDUCTOR, ROUND TIP ALL FINGERS
CURRENT RATING IN AMPS: NOT RATED
ELECTRICAL INSULATION FEATURE: INSULATED COMPLETELY
FINGER ACCOMMODATION DIAMETER: 0.242 INCHES NOMINAL ALL FINGERS
FINGER ACCOMMODATION LENGTH: 0.750 INCHES NOMINAL ALL FINGERS
JACK CONTACT ARRANGEMENT DESIGNATOR: J1
MATERIAL: PLASTIC BODY PLASTIC INSULATOR ANY ACCEPTABLE SPRING ANY ACCEPTABLE TERMINAL
MAXIMUM VOLTAGE RATING IN VOLTS: NOT RATED
SURFACE TREATMENT: ANY ACCEPTABLE SPRING ANY ACCEPTABLE TERMINAL
TERMINAL TYPE: TAB, SOLDER LUG
Related Searches:
40656
SOCKET,PLUG-IN ELECTRONIC COMPONENTS
NSN, MFG P/N
5935002968406
NSN
5935-00-296-8406
40656
SOCKET,PLUG-IN ELECTRONIC COMPONENTS
NSN, MFG P/N
5935002968406
NSN
5935-00-296-8406
MFG
ITT CORPORATION DBA ITT GILFILLAN
Description
ACCOMMODATED CONTACT QUANTITY: 2
BODY MATERIAL: CERAMIC
BODY MOUNTING HOLE ACCOMMODATION DIAMETER: 1.125 INCHES NOMINAL
CONTACT MATERIAL: COPPER ALLOY
CONTACT POSITION ARRANGEMENT STYLE: 806A OCTAL
CONTACT SURFACE TREATMENT: SILVER
DISTANCE BETWEEN MOUNTING FACILITY CENTERS: 1.500 INCHES NOMINAL
III FABRICATION METHOD: MOLDED
III PRECIOUS MATERIAL: SILVER
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES SILVER
III PRECIOUS MATERIAL AND WEIGHT: 0.010 SILVER GRAINS, TROY
III SPECIFIC EQUIPMENT ACCOMMODATED: ELECTRON TUBE
MISSING CONTACT DESIGNATION: 1ST CONTACT POSITION AND 3RD CONTACT POSITION AND 4TH CONTACT POSITION AND 5TH CONTACT POSITION AND 6TH CONTACT POSITION AND 8TH CONTACT POSITION
MOUNTING HOLE DIAMETER: 0.154 INCHES NOMINAL
MOUNTING HOLE STYLE: 8D ROUND, W/TWO MOUNTING HOLES
MOUNTING METHOD: SADDLE
MOUNTING TYPE FOR WHICH DESIGNED: CHASSIS
TERMINAL TYPE AND QUANTITY: 2 TAB, SOLDER LUG
Related Searches:
6013310
SOCKET,PLUG-IN ELECTRONIC COMPONENTS
NSN, MFG P/N
5935002968420
NSN
5935-00-296-8420
6013310
SOCKET,PLUG-IN ELECTRONIC COMPONENTS
NSN, MFG P/N
5935002968420
NSN
5935-00-296-8420
MFG
INTERNATIONAL BUSINESS MACHINES CORP PARTS ORDER CENTER DEPT E - 54
Description
ACCOMMODATED CONTACT QUANTITY: 8
BODY MATERIAL: PLASTIC
BODY MOUNTING HOLE ACCOMMODATION DIAMETER: 0.258 INCHES MAXIMUM
BODY STYLE: 33B TOP MOUNT W/RETAINER RING GROOVE
BUSHING HOLE AND KEYWAY LENGTH: ANY ACCEPTABLE
CONTACT MATERIAL: BERYLLIUM COPPER
CONTACT MAXIMUM CURRENT RATING IN AMPS: NOT RATED
CONTACT POSITION ARRANGEMENT STYLE: 805A LOCK-IN
CONTACT SURFACE TREATMENT: SILVER
FEATURES PROVIDED: COMPONENT RETAINING DEVICE
GROUND TERMINAL TYPE AND QUANTITY: 1 TAB, SOLDER LUG
III PRECIOUS MATERIAL: SILVER
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES SILVER
III PRECIOUS MATERIAL AND WEIGHT: 0.008 SILVER GRAINS, TROY
III SPECIFIC EQUIPMENT ACCOMMODATED: ELECTRON TUBE
MOUNTING HOLE STYLE: 5D ROUND, W/KEYWAY
MOUNTING KEYWAY WIDTH: 0.046 INCHES MAXIMUM
MOUNTING METHOD: RETAINER RING
MOUNTING TYPE FOR WHICH DESIGNED: CHASSIS
OVERALL DIAMETER: 1.236 INCHES MINIMUM AND 1.246 INCHES MAXIMUM
OVERALL HEIGHT: 0.703 INCHES MINIMUM AND 0.734 INCHES MAXIMUM
POLARIZATION TYPE: CENTER KEY HOLE
PROJECTION LENGTH BELOW MOUNTING SURFACE: 0.625 INCHES NOMINAL
TERMINAL TYPE AND QUANTITY: 8 TAB, SOLDER LUG
Related Searches:
78S8LTM
SOCKET,PLUG-IN ELECTRONIC COMPONENTS
NSN, MFG P/N
5935002968420
NSN
5935-00-296-8420
78S8LTM
SOCKET,PLUG-IN ELECTRONIC COMPONENTS
NSN, MFG P/N
5935002968420
NSN
5935-00-296-8420
MFG
AMPHENOL CORP SPECTRA-STRIP/ITD
Description
ACCOMMODATED CONTACT QUANTITY: 8
BODY MATERIAL: PLASTIC
BODY MOUNTING HOLE ACCOMMODATION DIAMETER: 0.258 INCHES MAXIMUM
BODY STYLE: 33B TOP MOUNT W/RETAINER RING GROOVE
BUSHING HOLE AND KEYWAY LENGTH: ANY ACCEPTABLE
CONTACT MATERIAL: BERYLLIUM COPPER
CONTACT MAXIMUM CURRENT RATING IN AMPS: NOT RATED
CONTACT POSITION ARRANGEMENT STYLE: 805A LOCK-IN
CONTACT SURFACE TREATMENT: SILVER
FEATURES PROVIDED: COMPONENT RETAINING DEVICE
GROUND TERMINAL TYPE AND QUANTITY: 1 TAB, SOLDER LUG
III PRECIOUS MATERIAL: SILVER
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES SILVER
III PRECIOUS MATERIAL AND WEIGHT: 0.008 SILVER GRAINS, TROY
III SPECIFIC EQUIPMENT ACCOMMODATED: ELECTRON TUBE
MOUNTING HOLE STYLE: 5D ROUND, W/KEYWAY
MOUNTING KEYWAY WIDTH: 0.046 INCHES MAXIMUM
MOUNTING METHOD: RETAINER RING
MOUNTING TYPE FOR WHICH DESIGNED: CHASSIS
OVERALL DIAMETER: 1.236 INCHES MINIMUM AND 1.246 INCHES MAXIMUM
OVERALL HEIGHT: 0.703 INCHES MINIMUM AND 0.734 INCHES MAXIMUM
POLARIZATION TYPE: CENTER KEY HOLE
PROJECTION LENGTH BELOW MOUNTING SURFACE: 0.625 INCHES NOMINAL
TERMINAL TYPE AND QUANTITY: 8 TAB, SOLDER LUG
Related Searches:
9191418
SOCKET,PLUG-IN ELECTRONIC COMPONENTS
NSN, MFG P/N
5935002968420
NSN
5935-00-296-8420
9191418
SOCKET,PLUG-IN ELECTRONIC COMPONENTS
NSN, MFG P/N
5935002968420
NSN
5935-00-296-8420
MFG
U S ARMY AVIATION AND MISSILE COMMAND
Description
ACCOMMODATED CONTACT QUANTITY: 8
BODY MATERIAL: PLASTIC
BODY MOUNTING HOLE ACCOMMODATION DIAMETER: 0.258 INCHES MAXIMUM
BODY STYLE: 33B TOP MOUNT W/RETAINER RING GROOVE
BUSHING HOLE AND KEYWAY LENGTH: ANY ACCEPTABLE
CONTACT MATERIAL: BERYLLIUM COPPER
CONTACT MAXIMUM CURRENT RATING IN AMPS: NOT RATED
CONTACT POSITION ARRANGEMENT STYLE: 805A LOCK-IN
CONTACT SURFACE TREATMENT: SILVER
FEATURES PROVIDED: COMPONENT RETAINING DEVICE
GROUND TERMINAL TYPE AND QUANTITY: 1 TAB, SOLDER LUG
III PRECIOUS MATERIAL: SILVER
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES SILVER
III PRECIOUS MATERIAL AND WEIGHT: 0.008 SILVER GRAINS, TROY
III SPECIFIC EQUIPMENT ACCOMMODATED: ELECTRON TUBE
MOUNTING HOLE STYLE: 5D ROUND, W/KEYWAY
MOUNTING KEYWAY WIDTH: 0.046 INCHES MAXIMUM
MOUNTING METHOD: RETAINER RING
MOUNTING TYPE FOR WHICH DESIGNED: CHASSIS
OVERALL DIAMETER: 1.236 INCHES MINIMUM AND 1.246 INCHES MAXIMUM
OVERALL HEIGHT: 0.703 INCHES MINIMUM AND 0.734 INCHES MAXIMUM
POLARIZATION TYPE: CENTER KEY HOLE
PROJECTION LENGTH BELOW MOUNTING SURFACE: 0.625 INCHES NOMINAL
TERMINAL TYPE AND QUANTITY: 8 TAB, SOLDER LUG
Related Searches:
219150
SOCKET,PLUG-IN ELECTRONIC COMPONENTS
NSN, MFG P/N
5935002968421
NSN
5935-00-296-8421
219150
SOCKET,PLUG-IN ELECTRONIC COMPONENTS
NSN, MFG P/N
5935002968421
NSN
5935-00-296-8421
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN MS2
Description
ACCOMMODATED CONTACT QUANTITY: 7
BODY MATERIAL: PLASTIC
BODY STYLE: 4B TOP MOUNT W/METAL SADDLE AND SHIELD BASE
COMPONENT SHIELD MOUNTING METHOD: BAYONET
CONTACT MATERIAL: COPPER ALLOY
CONTACT MAXIMUM CURRENT RATING IN AMPS: NOT RATED
CONTACT POSITION ARRANGEMENT STYLE: 700A MINIATURE
CONTACT SURFACE TREATMENT: SILVER
FEATURES PROVIDED: CENTER SHIELD
III PRECIOUS MATERIAL: SILVER
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACE SILVER
III PRECIOUS MATERIAL AND WEIGHT: 0.007 SILVER GRAINS, TROY
MOUNTING TYPE FOR WHICH DESIGNED: TUBE
OVERALL HEIGHT: 1.187 INCHES MAXIMUM
OVERALL LENGTH: 1.125 INCHES MAXIMUM
OVERALL WIDTH: 0.900 INCHES NOMINAL
POLARIZATION TYPE: CENTER KEY HOLE
PROJECTION LENGTH BELOW MOUNTING SURFACE: 0.562 INCHES NOMINAL
TERMINAL TYPE AND QUANTITY: 7 TAB, SOLDER LUG
Related Searches:
12292-1
SOCKET,PLUG-IN ELECTRONIC COMPONENTS
NSN, MFG P/N
5935002968426
NSN
5935-00-296-8426
12292-1
SOCKET,PLUG-IN ELECTRONIC COMPONENTS
NSN, MFG P/N
5935002968426
NSN
5935-00-296-8426
MFG
CESSNA AIRCRAFT CO ARC AVIONICS DIV
Description
ACCOMMODATED CONTACT QUANTITY: 8
BODY MATERIAL: CERAMIC
BODY MOUNTING HOLE ACCOMMODATION DIAMETER: 1.172 INCHES NOMINAL
BODY STYLE: 33B TOP MOUNT W/RETAINER RING GROOVE
CONTACT MATERIAL: COPPER ALLOY
CONTACT MAXIMUM CURRENT RATING IN AMPS: NOT RATED
CONTACT POSITION ARRANGEMENT STYLE: 806A OCTAL
CONTACT SURFACE TREATMENT: ANY ACCEPTABLE
III FABRICATION METHOD: MOLDED
III SPECIFIC EQUIPMENT ACCOMMODATED: ELECTRON TUBE
MOUNTING HOLE STYLE: 1D ROUND, BODY
MOUNTING METHOD: RETAINER RING
MOUNTING TYPE FOR WHICH DESIGNED: CHASSIS
OVERALL DIAMETER: 1.250 INCHES NOMINAL
OVERALL HEIGHT: 0.719 INCHES NOMINAL
PROJECTION LENGTH BELOW MOUNTING SURFACE: ANY ACCEPTABLE
TERMINAL TYPE AND QUANTITY: 8 TAB, SOLDER LUG
Related Searches:
587B1-4
SOCKET,PLUG-IN ELECTRONIC COMPONENTS
NSN, MFG P/N
5935002968430
NSN
5935-00-296-8430
587B1-4
SOCKET,PLUG-IN ELECTRONIC COMPONENTS
NSN, MFG P/N
5935002968430
NSN
5935-00-296-8430
MFG
CARDWELL CONDENSER CORP LAPOINTE-ADMIRAL DIV
Description
ACCOMMODATED CONTACT QUANTITY: 7
CONTACT MATERIAL: COPPER ALLOY
CONTACT MAXIMUM CURRENT RATING IN AMPS: NOT RATED
CONTACT POSITION ARRANGEMENT STYLE: 700A MINIATURE
FEATURES PROVIDED: CENTER SHIELD
TERMINAL TYPE AND QUANTITY: TAB,SOLDER LUG
Related Searches:
8323
SOCKET,PLUG-IN ELECTRONIC COMPONENTS
NSN, MFG P/N
5935002968430
NSN
5935-00-296-8430
8323
SOCKET,PLUG-IN ELECTRONIC COMPONENTS
NSN, MFG P/N
5935002968430
NSN
5935-00-296-8430
MFG
EBY HOLDING COMPANY INC. DBA EBY COMPANY
Description
ACCOMMODATED CONTACT QUANTITY: 7
CONTACT MATERIAL: COPPER ALLOY
CONTACT MAXIMUM CURRENT RATING IN AMPS: NOT RATED
CONTACT POSITION ARRANGEMENT STYLE: 700A MINIATURE
FEATURES PROVIDED: CENTER SHIELD
TERMINAL TYPE AND QUANTITY: TAB,SOLDER LUG
Related Searches:
AN3100C10SL3P
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935002968485
NSN
5935-00-296-8485
AN3100C10SL3P
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935002968485
NSN
5935-00-296-8485
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
BODY STYLE: 3G STRAIGHT SHAPE, EXTERNAL COUPLING
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT: 0.719 INCHES NOMINAL
CONNECTOR LOCKING METHOD: EXTERNALLY THREADED SHELL
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS: 200.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM CURRENT RATING IN AMPS: 22.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS: 250.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE: ADAE 10SL-3 SINGLE MATING END
CONTACT REMOVABILITY: NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT: GOLD SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS3100C10SL3P
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH: 0.719 INCHES NOMINAL
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE: 0.562 INCHES MINIMUM AND 0.593 INCHES MAXIMUM
ENVIRONMENTAL PROTECTION: MOISTURE RESISTANT AND PRESSURE PROOF AND VIBRATION RESISTANT AND SALT WATER RESISTANT
III PRECIOUS MATERIAL: GOLD
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES GOLD
INCLUDED CONTACT QUANTITY: 3 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE: ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
INSERT MATERIAL: RUBBER SINGLE MATING END
INSERT POSITION IN DEG: 0.0
MANUFACTURERS CODE: 81349
MANUFACTURERS CODE: 96906
MATING END QUANTITY: 1
NOMINAL THREAD LENGTH: 0.375 INCHES
NOMINAL THREAD SIZE: 0.625 INCHES AND 0.625 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MILC5015
OVERALL HEIGHT: 1.000 INCHES NOMINAL
OVERALL LENGTH: 1.531 INCHES MAXIMUM
OVERALL WIDTH: 1.000 INCHES NOMINAL
POLARIZATION METHOD: KEYWAY OR MULTIPLE KEYWAY
SHELL MATERIAL: ALUMINUM ALLOY
SHELL SURFACE TREATMENT: CADMIUM
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SHELL TYPE: SOLID
SPEC/STD CONTROLLING DATA:
TERMINAL LOCATION: BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE: SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT: 81349-MIL-C-5015 SPECIFICATION
THREAD CLASS: 2A AND 2A
THREAD DIRECTION: RIGHT-HAND AND RIGHT-HAND
THREAD QUANTITY PER INCH: 24 AND 24
THREAD SERIES DESIGNATOR: UNEF AND UNEF
THREADED DEVICE TYPE: BACK SHELL AND COUPLING FACILITY
UNTHREADED MOUNTING HOLE DIAMETER: 0.115 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
Related Searches:
MILC5015
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935002968485
NSN
5935-00-296-8485
MILC5015
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935002968485
NSN
5935-00-296-8485
MFG
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
BODY STYLE: 3G STRAIGHT SHAPE, EXTERNAL COUPLING
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT: 0.719 INCHES NOMINAL
CONNECTOR LOCKING METHOD: EXTERNALLY THREADED SHELL
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS: 200.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM CURRENT RATING IN AMPS: 22.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS: 250.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE: ADAE 10SL-3 SINGLE MATING END
CONTACT REMOVABILITY: NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT: GOLD SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS3100C10SL3P
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH: 0.719 INCHES NOMINAL
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE: 0.562 INCHES MINIMUM AND 0.593 INCHES MAXIMUM
ENVIRONMENTAL PROTECTION: MOISTURE RESISTANT AND PRESSURE PROOF AND VIBRATION RESISTANT AND SALT WATER RESISTANT
III PRECIOUS MATERIAL: GOLD
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES GOLD
INCLUDED CONTACT QUANTITY: 3 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE: ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
INSERT MATERIAL: RUBBER SINGLE MATING END
INSERT POSITION IN DEG: 0.0
MANUFACTURERS CODE: 81349
MANUFACTURERS CODE: 96906
MATING END QUANTITY: 1
NOMINAL THREAD LENGTH: 0.375 INCHES
NOMINAL THREAD SIZE: 0.625 INCHES AND 0.625 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MILC5015
OVERALL HEIGHT: 1.000 INCHES NOMINAL
OVERALL LENGTH: 1.531 INCHES MAXIMUM
OVERALL WIDTH: 1.000 INCHES NOMINAL
POLARIZATION METHOD: KEYWAY OR MULTIPLE KEYWAY
SHELL MATERIAL: ALUMINUM ALLOY
SHELL SURFACE TREATMENT: CADMIUM
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SHELL TYPE: SOLID
SPEC/STD CONTROLLING DATA:
TERMINAL LOCATION: BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE: SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT: 81349-MIL-C-5015 SPECIFICATION
THREAD CLASS: 2A AND 2A
THREAD DIRECTION: RIGHT-HAND AND RIGHT-HAND
THREAD QUANTITY PER INCH: 24 AND 24
THREAD SERIES DESIGNATOR: UNEF AND UNEF
THREADED DEVICE TYPE: BACK SHELL AND COUPLING FACILITY
UNTHREADED MOUNTING HOLE DIAMETER: 0.115 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
Related Searches:
MS3100C10SL3P
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935002968485
NSN
5935-00-296-8485
MS3100C10SL3P
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935002968485
NSN
5935-00-296-8485
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
BODY STYLE: 3G STRAIGHT SHAPE, EXTERNAL COUPLING
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT: 0.719 INCHES NOMINAL
CONNECTOR LOCKING METHOD: EXTERNALLY THREADED SHELL
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS: 200.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM CURRENT RATING IN AMPS: 22.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS: 250.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE: ADAE 10SL-3 SINGLE MATING END
CONTACT REMOVABILITY: NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT: GOLD SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS3100C10SL3P
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH: 0.719 INCHES NOMINAL
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE: 0.562 INCHES MINIMUM AND 0.593 INCHES MAXIMUM
ENVIRONMENTAL PROTECTION: MOISTURE RESISTANT AND PRESSURE PROOF AND VIBRATION RESISTANT AND SALT WATER RESISTANT
III PRECIOUS MATERIAL: GOLD
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES GOLD
INCLUDED CONTACT QUANTITY: 3 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE: ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
INSERT MATERIAL: RUBBER SINGLE MATING END
INSERT POSITION IN DEG: 0.0
MANUFACTURERS CODE: 81349
MANUFACTURERS CODE: 96906
MATING END QUANTITY: 1
NOMINAL THREAD LENGTH: 0.375 INCHES
NOMINAL THREAD SIZE: 0.625 INCHES AND 0.625 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MILC5015
OVERALL HEIGHT: 1.000 INCHES NOMINAL
OVERALL LENGTH: 1.531 INCHES MAXIMUM
OVERALL WIDTH: 1.000 INCHES NOMINAL
POLARIZATION METHOD: KEYWAY OR MULTIPLE KEYWAY
SHELL MATERIAL: ALUMINUM ALLOY
SHELL SURFACE TREATMENT: CADMIUM
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SHELL TYPE: SOLID
SPEC/STD CONTROLLING DATA:
TERMINAL LOCATION: BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE: SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT: 81349-MIL-C-5015 SPECIFICATION
THREAD CLASS: 2A AND 2A
THREAD DIRECTION: RIGHT-HAND AND RIGHT-HAND
THREAD QUANTITY PER INCH: 24 AND 24
THREAD SERIES DESIGNATOR: UNEF AND UNEF
THREADED DEVICE TYPE: BACK SHELL AND COUPLING FACILITY
UNTHREADED MOUNTING HOLE DIAMETER: 0.115 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
Related Searches:
4118832-094
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935002968489
NSN
5935-00-296-8489
4118832-094
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935002968489
NSN
5935-00-296-8489
MFG
RAYTHEON COMPANY
Description
BODY STYLE: 5G STRAIGHT SHAPE, EXTERNAL COUPLING W/BACKSHELL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT: 0.969 INCHES NOMINAL
CONNECTOR LOCKING METHOD: EXTERNALLY THREADED SHELL
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS: 500.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM CURRENT RATING IN AMPS: 22.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS: 700.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE: AFAN 16S-8 SINGLE MATING END
CONTACT REMOVABILITY: NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT: GOLD SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS3102E16S8P
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH: 0.969 INCHES NOMINAL
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE: 0.562 INCHES MINIMUM AND 0.593 INCHES MAXIMUM
ENVIRONMENTAL PROTECTION: MOISTURE RESISTANT AND VIBRATION RESISTANT AND SALT WATER RESISTANT
III PRECIOUS MATERIAL: GOLD
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES GOLD
INCLUDED CONTACT QUANTITY: 5 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE: ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
INSERT MATERIAL: RUBBER SINGLE MATING END
INSERT POSITION IN DEG: 0.0
MANUFACTURERS CODE: 81349
MANUFACTURERS CODE: 96906
MATING END QUANTITY: 1
NOMINAL THREAD LENGTH: 0.375 INCHES
NOMINAL THREAD SIZE: 1.000 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MILC5015
OVERALL HEIGHT: 1.281 INCHES NOMINAL
OVERALL LENGTH: 1.188 INCHES MAXIMUM
OVERALL WIDTH: 1.281 INCHES NOMINAL
POLARIZATION METHOD: KEYWAY OR MULTIPLE KEYWAY
SHELL MATERIAL: ALUMINUM ALLOY
SHELL SURFACE TREATMENT: CADMIUM
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SHELL TYPE: SOLID
SPEC/STD CONTROLLING DATA:
TERMINAL LOCATION: BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE: SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT: 81349-MIL-C-5015 SPECIFICATION
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD SERIES DESIGNATOR: UNEF
THREADED DEVICE TYPE: COUPLING FACILITY
UNTHREADED MOUNTING HOLE DIAMETER: 0.115 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
Related Searches:
7905438-00
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935002968489
NSN
5935-00-296-8489
7905438-00
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935002968489
NSN
5935-00-296-8489
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN DIV MS2
Description
BODY STYLE: 5G STRAIGHT SHAPE, EXTERNAL COUPLING W/BACKSHELL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT: 0.969 INCHES NOMINAL
CONNECTOR LOCKING METHOD: EXTERNALLY THREADED SHELL
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS: 500.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM CURRENT RATING IN AMPS: 22.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS: 700.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE: AFAN 16S-8 SINGLE MATING END
CONTACT REMOVABILITY: NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT: GOLD SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS3102E16S8P
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH: 0.969 INCHES NOMINAL
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE: 0.562 INCHES MINIMUM AND 0.593 INCHES MAXIMUM
ENVIRONMENTAL PROTECTION: MOISTURE RESISTANT AND VIBRATION RESISTANT AND SALT WATER RESISTANT
III PRECIOUS MATERIAL: GOLD
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES GOLD
INCLUDED CONTACT QUANTITY: 5 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE: ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
INSERT MATERIAL: RUBBER SINGLE MATING END
INSERT POSITION IN DEG: 0.0
MANUFACTURERS CODE: 81349
MANUFACTURERS CODE: 96906
MATING END QUANTITY: 1
NOMINAL THREAD LENGTH: 0.375 INCHES
NOMINAL THREAD SIZE: 1.000 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MILC5015
OVERALL HEIGHT: 1.281 INCHES NOMINAL
OVERALL LENGTH: 1.188 INCHES MAXIMUM
OVERALL WIDTH: 1.281 INCHES NOMINAL
POLARIZATION METHOD: KEYWAY OR MULTIPLE KEYWAY
SHELL MATERIAL: ALUMINUM ALLOY
SHELL SURFACE TREATMENT: CADMIUM
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SHELL TYPE: SOLID
SPEC/STD CONTROLLING DATA:
TERMINAL LOCATION: BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE: SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT: 81349-MIL-C-5015 SPECIFICATION
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD SERIES DESIGNATOR: UNEF
THREADED DEVICE TYPE: COUPLING FACILITY
UNTHREADED MOUNTING HOLE DIAMETER: 0.115 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
Related Searches:
AN3102E16S8P
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935002968489
NSN
5935-00-296-8489
AN3102E16S8P
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935002968489
NSN
5935-00-296-8489
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
BODY STYLE: 5G STRAIGHT SHAPE, EXTERNAL COUPLING W/BACKSHELL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT: 0.969 INCHES NOMINAL
CONNECTOR LOCKING METHOD: EXTERNALLY THREADED SHELL
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS: 500.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM CURRENT RATING IN AMPS: 22.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS: 700.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE: AFAN 16S-8 SINGLE MATING END
CONTACT REMOVABILITY: NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT: GOLD SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS3102E16S8P
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH: 0.969 INCHES NOMINAL
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE: 0.562 INCHES MINIMUM AND 0.593 INCHES MAXIMUM
ENVIRONMENTAL PROTECTION: MOISTURE RESISTANT AND VIBRATION RESISTANT AND SALT WATER RESISTANT
III PRECIOUS MATERIAL: GOLD
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES GOLD
INCLUDED CONTACT QUANTITY: 5 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE: ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
INSERT MATERIAL: RUBBER SINGLE MATING END
INSERT POSITION IN DEG: 0.0
MANUFACTURERS CODE: 81349
MANUFACTURERS CODE: 96906
MATING END QUANTITY: 1
NOMINAL THREAD LENGTH: 0.375 INCHES
NOMINAL THREAD SIZE: 1.000 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MILC5015
OVERALL HEIGHT: 1.281 INCHES NOMINAL
OVERALL LENGTH: 1.188 INCHES MAXIMUM
OVERALL WIDTH: 1.281 INCHES NOMINAL
POLARIZATION METHOD: KEYWAY OR MULTIPLE KEYWAY
SHELL MATERIAL: ALUMINUM ALLOY
SHELL SURFACE TREATMENT: CADMIUM
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SHELL TYPE: SOLID
SPEC/STD CONTROLLING DATA:
TERMINAL LOCATION: BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE: SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT: 81349-MIL-C-5015 SPECIFICATION
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD SERIES DESIGNATOR: UNEF
THREADED DEVICE TYPE: COUPLING FACILITY
UNTHREADED MOUNTING HOLE DIAMETER: 0.115 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
Related Searches:
CA3102E16S8PA115
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935002968489
NSN
5935-00-296-8489
CA3102E16S8PA115
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935002968489
NSN
5935-00-296-8489
MFG
ITT CORPORATION DBA I T T CANNON
Description
BODY STYLE: 5G STRAIGHT SHAPE, EXTERNAL COUPLING W/BACKSHELL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT: 0.969 INCHES NOMINAL
CONNECTOR LOCKING METHOD: EXTERNALLY THREADED SHELL
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS: 500.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM CURRENT RATING IN AMPS: 22.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS: 700.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE: AFAN 16S-8 SINGLE MATING END
CONTACT REMOVABILITY: NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT: GOLD SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS3102E16S8P
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH: 0.969 INCHES NOMINAL
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE: 0.562 INCHES MINIMUM AND 0.593 INCHES MAXIMUM
ENVIRONMENTAL PROTECTION: MOISTURE RESISTANT AND VIBRATION RESISTANT AND SALT WATER RESISTANT
III PRECIOUS MATERIAL: GOLD
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES GOLD
INCLUDED CONTACT QUANTITY: 5 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE: ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
INSERT MATERIAL: RUBBER SINGLE MATING END
INSERT POSITION IN DEG: 0.0
MANUFACTURERS CODE: 81349
MANUFACTURERS CODE: 96906
MATING END QUANTITY: 1
NOMINAL THREAD LENGTH: 0.375 INCHES
NOMINAL THREAD SIZE: 1.000 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MILC5015
OVERALL HEIGHT: 1.281 INCHES NOMINAL
OVERALL LENGTH: 1.188 INCHES MAXIMUM
OVERALL WIDTH: 1.281 INCHES NOMINAL
POLARIZATION METHOD: KEYWAY OR MULTIPLE KEYWAY
SHELL MATERIAL: ALUMINUM ALLOY
SHELL SURFACE TREATMENT: CADMIUM
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SHELL TYPE: SOLID
SPEC/STD CONTROLLING DATA:
TERMINAL LOCATION: BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE: SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT: 81349-MIL-C-5015 SPECIFICATION
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD SERIES DESIGNATOR: UNEF
THREADED DEVICE TYPE: COUPLING FACILITY
UNTHREADED MOUNTING HOLE DIAMETER: 0.115 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
Related Searches:
GP3102E16S8P
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935002968489
NSN
5935-00-296-8489
GP3102E16S8P
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935002968489
NSN
5935-00-296-8489
MFG
AMPHENOL CORPORATION DBA AMPHENOL AEROSPACE INDUSTRIAL
Description
BODY STYLE: 5G STRAIGHT SHAPE, EXTERNAL COUPLING W/BACKSHELL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT: 0.969 INCHES NOMINAL
CONNECTOR LOCKING METHOD: EXTERNALLY THREADED SHELL
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS: 500.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM CURRENT RATING IN AMPS: 22.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS: 700.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE: AFAN 16S-8 SINGLE MATING END
CONTACT REMOVABILITY: NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT: GOLD SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS3102E16S8P
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH: 0.969 INCHES NOMINAL
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE: 0.562 INCHES MINIMUM AND 0.593 INCHES MAXIMUM
ENVIRONMENTAL PROTECTION: MOISTURE RESISTANT AND VIBRATION RESISTANT AND SALT WATER RESISTANT
III PRECIOUS MATERIAL: GOLD
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES GOLD
INCLUDED CONTACT QUANTITY: 5 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE: ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
INSERT MATERIAL: RUBBER SINGLE MATING END
INSERT POSITION IN DEG: 0.0
MANUFACTURERS CODE: 81349
MANUFACTURERS CODE: 96906
MATING END QUANTITY: 1
NOMINAL THREAD LENGTH: 0.375 INCHES
NOMINAL THREAD SIZE: 1.000 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MILC5015
OVERALL HEIGHT: 1.281 INCHES NOMINAL
OVERALL LENGTH: 1.188 INCHES MAXIMUM
OVERALL WIDTH: 1.281 INCHES NOMINAL
POLARIZATION METHOD: KEYWAY OR MULTIPLE KEYWAY
SHELL MATERIAL: ALUMINUM ALLOY
SHELL SURFACE TREATMENT: CADMIUM
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SHELL TYPE: SOLID
SPEC/STD CONTROLLING DATA:
TERMINAL LOCATION: BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE: SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT: 81349-MIL-C-5015 SPECIFICATION
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD SERIES DESIGNATOR: UNEF
THREADED DEVICE TYPE: COUPLING FACILITY
UNTHREADED MOUNTING HOLE DIAMETER: 0.115 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
Related Searches:
MILC5015
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935002968489
NSN
5935-00-296-8489
MILC5015
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935002968489
NSN
5935-00-296-8489
MFG
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
BODY STYLE: 5G STRAIGHT SHAPE, EXTERNAL COUPLING W/BACKSHELL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT: 0.969 INCHES NOMINAL
CONNECTOR LOCKING METHOD: EXTERNALLY THREADED SHELL
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS: 500.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM CURRENT RATING IN AMPS: 22.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS: 700.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE: AFAN 16S-8 SINGLE MATING END
CONTACT REMOVABILITY: NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT: GOLD SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS3102E16S8P
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH: 0.969 INCHES NOMINAL
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE: 0.562 INCHES MINIMUM AND 0.593 INCHES MAXIMUM
ENVIRONMENTAL PROTECTION: MOISTURE RESISTANT AND VIBRATION RESISTANT AND SALT WATER RESISTANT
III PRECIOUS MATERIAL: GOLD
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES GOLD
INCLUDED CONTACT QUANTITY: 5 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE: ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
INSERT MATERIAL: RUBBER SINGLE MATING END
INSERT POSITION IN DEG: 0.0
MANUFACTURERS CODE: 81349
MANUFACTURERS CODE: 96906
MATING END QUANTITY: 1
NOMINAL THREAD LENGTH: 0.375 INCHES
NOMINAL THREAD SIZE: 1.000 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MILC5015
OVERALL HEIGHT: 1.281 INCHES NOMINAL
OVERALL LENGTH: 1.188 INCHES MAXIMUM
OVERALL WIDTH: 1.281 INCHES NOMINAL
POLARIZATION METHOD: KEYWAY OR MULTIPLE KEYWAY
SHELL MATERIAL: ALUMINUM ALLOY
SHELL SURFACE TREATMENT: CADMIUM
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SHELL TYPE: SOLID
SPEC/STD CONTROLLING DATA:
TERMINAL LOCATION: BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE: SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT: 81349-MIL-C-5015 SPECIFICATION
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD SERIES DESIGNATOR: UNEF
THREADED DEVICE TYPE: COUPLING FACILITY
UNTHREADED MOUNTING HOLE DIAMETER: 0.115 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
Related Searches:
MS3102E16S8P
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935002968489
NSN
5935-00-296-8489
MS3102E16S8P
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935002968489
NSN
5935-00-296-8489
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
BODY STYLE: 5G STRAIGHT SHAPE, EXTERNAL COUPLING W/BACKSHELL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT: 0.969 INCHES NOMINAL
CONNECTOR LOCKING METHOD: EXTERNALLY THREADED SHELL
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS: 500.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM CURRENT RATING IN AMPS: 22.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS: 700.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE: AFAN 16S-8 SINGLE MATING END
CONTACT REMOVABILITY: NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT: GOLD SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS3102E16S8P
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH: 0.969 INCHES NOMINAL
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE: 0.562 INCHES MINIMUM AND 0.593 INCHES MAXIMUM
ENVIRONMENTAL PROTECTION: MOISTURE RESISTANT AND VIBRATION RESISTANT AND SALT WATER RESISTANT
III PRECIOUS MATERIAL: GOLD
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES GOLD
INCLUDED CONTACT QUANTITY: 5 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE: ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
INSERT MATERIAL: RUBBER SINGLE MATING END
INSERT POSITION IN DEG: 0.0
MANUFACTURERS CODE: 81349
MANUFACTURERS CODE: 96906
MATING END QUANTITY: 1
NOMINAL THREAD LENGTH: 0.375 INCHES
NOMINAL THREAD SIZE: 1.000 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MILC5015
OVERALL HEIGHT: 1.281 INCHES NOMINAL
OVERALL LENGTH: 1.188 INCHES MAXIMUM
OVERALL WIDTH: 1.281 INCHES NOMINAL
POLARIZATION METHOD: KEYWAY OR MULTIPLE KEYWAY
SHELL MATERIAL: ALUMINUM ALLOY
SHELL SURFACE TREATMENT: CADMIUM
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SHELL TYPE: SOLID
SPEC/STD CONTROLLING DATA:
TERMINAL LOCATION: BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE: SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT: 81349-MIL-C-5015 SPECIFICATION
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD SERIES DESIGNATOR: UNEF
THREADED DEVICE TYPE: COUPLING FACILITY
UNTHREADED MOUNTING HOLE DIAMETER: 0.115 INCHES MINIMUM AND 0.130 INCHES MAXIMUM