My Quote Request
5935-00-391-4257
20 Products
232AJACK
JACK,TELEPHONE
NSN, MFG P/N
5935003914257
NSN
5935-00-391-4257
MFG
AMERICAN TELEPHONE AND TELEGRAPH CO
Description
ACCOMMODATED FINGER TYPE: TWO CONDUCTOR, ROUND TIP SINGLE FINGER
BODY STYLE: 5 STRAIGHT HANDLE
BODY WIDTH: 0.563 INCHES NOMINAL
BUSHING ACCOMMODATION HOLE SHAPE: ROUND
BUSHING THRU-HOLE ACCOMMODATION DIAMETER: 0.453 INCHES NOMINAL
CURRENT RATING IN AMPS: NOT RATED
ELECTRICAL INSULATION FEATURE: INSULATED COMPLETELY
FINGER ACCOMMODATION DIAMETER: 0.250 INCHES NOMINAL SINGLE FINGER
FINGER ACCOMMODATION LENGTH: 1.203 INCHES NOMINAL SINGLE FINGER
JACK CONTACT ARRANGEMENT DESIGNATOR: J4
MAXIMUM VOLTAGE RATING IN VOLTS: NOT RATED
MOUNTING BUSHING DIAMETER: 0.453 INCHES NOMINAL
MOUNTING BUSHING LENGTH: 0.578 INCHES NOMINAL
MOUNTING HOLE DIAMETER: 0.156 INCHES NOMINAL
OVERALL HEIGHT: 0.813 INCHES NOMINAL
OVERALL LENGTH: 3.469 INCHES NOMINAL
TERMINAL TYPE: TAB, SOLDER LUG
Related Searches:
MS3456L14S6P
CONNECTOR,PLUG,ELECTRICAL
NSN, MFG P/N
5935003914435
NSN
5935-00-391-4435
MS3456L14S6P
CONNECTOR,PLUG,ELECTRICAL
NSN, MFG P/N
5935003914435
NSN
5935-00-391-4435
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
BODY STYLE: 7A STRAIGHT SHAPE, INTERNAL COUPLING
CONNECTOR LOCKING METHOD: INTERNALLY THREADED COUPLING RING
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS: 200.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM CURRENT RATING IN AMPS: 22.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS: 250.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE: AGAG 14S-6,11-6 SINGLE MATING END
CONTACT REMOVABILITY: REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT: GOLD AND SILVER SINGLE MATING END SINGLE CONTACT GROUPING
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS3456L14S6P
ENVIRONMENTAL PROTECTION: MOISTURE RESISTANT AND VIBRATION RESISTANT AND SALT WATER RESISTANT
III PRECIOUS MATERIAL: GOLD AND SILVER
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES GOLD AND CONTACT SURFACES SILVER
III PRECIOUS MATERIAL AND WEIGHT: 0.006 GOLD GRAINS, TROY AND 0.006 SILVER GRAINS, TROY
INCLUDED CONTACT QUANTITY: 6 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE: ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
INSERT MATERIAL: RUBBER SINGLE MATING END
INSERT POSITION IN DEG: 0.0
MANUFACTURERS CODE: 81349
MANUFACTURERS CODE: 96906
MATING END QUANTITY: 1
NOMINAL THREAD LENGTH: 0.290 INCHES AND 0.375 INCHES
NOMINAL THREAD SIZE: 0.875 INCHES AND 0.875 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MIL-C-5015
OVERALL DIAMETER: 1.156 INCHES MAXIMUM
OVERALL LENGTH: 2.031 INCHES MAXIMUM
POLARIZATION METHOD: KEYWAY OR MULTIPLE KEYWAY
SHELL MATERIAL: ALUMINUM ALLOY
SHELL SURFACE TREATMENT: NICKEL
SHELL TYPE: SOLID
SPEC/STD CONTROLLING DATA:
SPECIFICATION/STANDARD DATA: 81349-MIL-C-5015 GOVERNMENT SPECIFICATION
TERMINAL LOCATION: BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE: CRIMP SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT: 81349-MIL-C-5015 SPECIFICATION
THREAD CLASS: 2A AND 2B
THREAD DIRECTION: RIGHT-HAND AND RIGHT-HAND
THREAD QUANTITY PER INCH: 2 AND 20
THREAD SERIES DESIGNATOR: UNEF AND UNEF
THREADED DEVICE TYPE: BACK SHELL AND COUPLING FACILITY
Related Searches:
900-147-22
CLAMP,CABLE,ELECTRICAL CONNECTOR
NSN, MFG P/N
5935003914452
NSN
5935-00-391-4452
900-147-22
CLAMP,CABLE,ELECTRICAL CONNECTOR
NSN, MFG P/N
5935003914452
NSN
5935-00-391-4452
MFG
ELECTRO ADAPTER INC. DBA AQ DIE CASTING
Description
BODY DIAMETER: 1.407 INCHES MINIMUM AND 1.469 INCHES MAXIMUM
BODY HEIGHT: 1.500 INCHES MINIMUM AND 1.562 INCHES MAXIMUM
BODY LENGTH: 1.219 INCHES MINIMUM AND 1.281 INCHES MAXIMUM
CABLE OPENING DIAMETER: 0.375 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
CABLE OPENING QUANTITY: 1
MATERIAL: ALUMINUM ALLOY
MOUNTING FACILITY TYPE AND QUANTITY: 1 THREADED COUPLING
NOMINAL THREAD SIZE: 0.313 INCHES
SEAL MATERIAL: RUBBER
SEAL TYPE: BUSHING
SIZE DESIGNATION: 22
STYLE DESIGNATOR: 1B DOUBLE CLAMPING ACTION W OR W/O BUSHING
SURFACE TREATMENT: CADMIUM
THREAD CLASS: 2B
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNEF
Related Searches:
GA800VF22-13
CLAMP,CABLE,ELECTRICAL CONNECTOR
NSN, MFG P/N
5935003914452
NSN
5935-00-391-4452
GA800VF22-13
CLAMP,CABLE,ELECTRICAL CONNECTOR
NSN, MFG P/N
5935003914452
NSN
5935-00-391-4452
MFG
NORTHROP GRUMMAN SYSTEMS CORPORATION DIV NORTHROP GRUMMAN AEROSPACE SYSTEMS
Description
BODY DIAMETER: 1.407 INCHES MINIMUM AND 1.469 INCHES MAXIMUM
BODY HEIGHT: 1.500 INCHES MINIMUM AND 1.562 INCHES MAXIMUM
BODY LENGTH: 1.219 INCHES MINIMUM AND 1.281 INCHES MAXIMUM
CABLE OPENING DIAMETER: 0.375 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
CABLE OPENING QUANTITY: 1
MATERIAL: ALUMINUM ALLOY
MOUNTING FACILITY TYPE AND QUANTITY: 1 THREADED COUPLING
NOMINAL THREAD SIZE: 0.313 INCHES
SEAL MATERIAL: RUBBER
SEAL TYPE: BUSHING
SIZE DESIGNATION: 22
STYLE DESIGNATOR: 1B DOUBLE CLAMPING ACTION W OR W/O BUSHING
SURFACE TREATMENT: CADMIUM
THREAD CLASS: 2B
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNEF
Related Searches:
11508735-1
SOCKET,PLUG-IN ELECTRONIC COMPONENTS
NSN, MFG P/N
5935003914671
NSN
5935-00-391-4671
11508735-1
SOCKET,PLUG-IN ELECTRONIC COMPONENTS
NSN, MFG P/N
5935003914671
NSN
5935-00-391-4671
MFG
U S ARMY AVIATION AND MISSILE COMMAND
Description
ACCOMMODATED CONTACT QUANTITY: 8
BODY MATERIAL: POLYAMIDE NYLON
BODY STYLE: 69B TOP MOUNT
CONTACT MATERIAL: BERYLLIUM COPPER
CONTACT MAXIMUM CURRENT RATING IN AMPS: NOT RATED
CONTACT POSITION ARRANGEMENT STYLE: 1417A DUAL IN-LINE
CONTACT SURFACE TREATMENT: GOLD AND NICKEL
DISTANCE BETWEEN MOUNTING FACILITY CENTERS: 0.400 INCHES NOMINAL
III PRECIOUS MATERIAL: GOLD
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES GOLD
III PRECIOUS MATERIAL AND WEIGHT: 0.008 GOLD GRAINS, TROY
MOUNTING HOLE DIAMETER: 0.094 INCHES NOMINAL
MOUNTING HOLE STYLE: 17D TWO MOUNTING HOLES/SLOTS, IN-LINE
MOUNTING METHOD: UNTHREADED HOLE
MOUNTING TYPE FOR WHICH DESIGNED: CHASSIS
OVERALL HEIGHT: 0.260 INCHES NOMINAL
OVERALL LENGTH: 0.400 INCHES NOMINAL
OVERALL WIDTH: 0.400 INCHES MAXIMUM
POLARIZATION TYPE: SLOT
TERMINAL LENGTH: 0.110 INCHES MINIMUM
TERMINAL TYPE AND QUANTITY: 8 TAB, SOLDER LUG
Related Searches:
220-0049-100
SOCKET,PLUG-IN ELECTRONIC COMPONENTS
NSN, MFG P/N
5935003914671
NSN
5935-00-391-4671
220-0049-100
SOCKET,PLUG-IN ELECTRONIC COMPONENTS
NSN, MFG P/N
5935003914671
NSN
5935-00-391-4671
MFG
ROCKWELL COLLINS INC. DBA GOVERNMENT SYSTEMS DIV GOVERNMENT SYSTEMS
Description
ACCOMMODATED CONTACT QUANTITY: 8
BODY MATERIAL: POLYAMIDE NYLON
BODY STYLE: 69B TOP MOUNT
CONTACT MATERIAL: BERYLLIUM COPPER
CONTACT MAXIMUM CURRENT RATING IN AMPS: NOT RATED
CONTACT POSITION ARRANGEMENT STYLE: 1417A DUAL IN-LINE
CONTACT SURFACE TREATMENT: GOLD AND NICKEL
DISTANCE BETWEEN MOUNTING FACILITY CENTERS: 0.400 INCHES NOMINAL
III PRECIOUS MATERIAL: GOLD
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES GOLD
III PRECIOUS MATERIAL AND WEIGHT: 0.008 GOLD GRAINS, TROY
MOUNTING HOLE DIAMETER: 0.094 INCHES NOMINAL
MOUNTING HOLE STYLE: 17D TWO MOUNTING HOLES/SLOTS, IN-LINE
MOUNTING METHOD: UNTHREADED HOLE
MOUNTING TYPE FOR WHICH DESIGNED: CHASSIS
OVERALL HEIGHT: 0.260 INCHES NOMINAL
OVERALL LENGTH: 0.400 INCHES NOMINAL
OVERALL WIDTH: 0.400 INCHES MAXIMUM
POLARIZATION TYPE: SLOT
TERMINAL LENGTH: 0.110 INCHES MINIMUM
TERMINAL TYPE AND QUANTITY: 8 TAB, SOLDER LUG
Related Searches:
229945-0008
SOCKET,PLUG-IN ELECTRONIC COMPONENTS
NSN, MFG P/N
5935003914671
NSN
5935-00-391-4671
229945-0008
SOCKET,PLUG-IN ELECTRONIC COMPONENTS
NSN, MFG P/N
5935003914671
NSN
5935-00-391-4671
MFG
THALES ATM INC.
Description
ACCOMMODATED CONTACT QUANTITY: 8
BODY MATERIAL: POLYAMIDE NYLON
BODY STYLE: 69B TOP MOUNT
CONTACT MATERIAL: BERYLLIUM COPPER
CONTACT MAXIMUM CURRENT RATING IN AMPS: NOT RATED
CONTACT POSITION ARRANGEMENT STYLE: 1417A DUAL IN-LINE
CONTACT SURFACE TREATMENT: GOLD AND NICKEL
DISTANCE BETWEEN MOUNTING FACILITY CENTERS: 0.400 INCHES NOMINAL
III PRECIOUS MATERIAL: GOLD
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES GOLD
III PRECIOUS MATERIAL AND WEIGHT: 0.008 GOLD GRAINS, TROY
MOUNTING HOLE DIAMETER: 0.094 INCHES NOMINAL
MOUNTING HOLE STYLE: 17D TWO MOUNTING HOLES/SLOTS, IN-LINE
MOUNTING METHOD: UNTHREADED HOLE
MOUNTING TYPE FOR WHICH DESIGNED: CHASSIS
OVERALL HEIGHT: 0.260 INCHES NOMINAL
OVERALL LENGTH: 0.400 INCHES NOMINAL
OVERALL WIDTH: 0.400 INCHES MAXIMUM
POLARIZATION TYPE: SLOT
TERMINAL LENGTH: 0.110 INCHES MINIMUM
TERMINAL TYPE AND QUANTITY: 8 TAB, SOLDER LUG
Related Searches:
C93-08-02
SOCKET,PLUG-IN ELECTRONIC COMPONENTS
NSN, MFG P/N
5935003914671
NSN
5935-00-391-4671
C93-08-02
SOCKET,PLUG-IN ELECTRONIC COMPONENTS
NSN, MFG P/N
5935003914671
NSN
5935-00-391-4671
MFG
TEXAS INSTRUMENTS INC METALLURGICAL MATERIALS DIV
Description
ACCOMMODATED CONTACT QUANTITY: 8
BODY MATERIAL: POLYAMIDE NYLON
BODY STYLE: 69B TOP MOUNT
CONTACT MATERIAL: BERYLLIUM COPPER
CONTACT MAXIMUM CURRENT RATING IN AMPS: NOT RATED
CONTACT POSITION ARRANGEMENT STYLE: 1417A DUAL IN-LINE
CONTACT SURFACE TREATMENT: GOLD AND NICKEL
DISTANCE BETWEEN MOUNTING FACILITY CENTERS: 0.400 INCHES NOMINAL
III PRECIOUS MATERIAL: GOLD
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES GOLD
III PRECIOUS MATERIAL AND WEIGHT: 0.008 GOLD GRAINS, TROY
MOUNTING HOLE DIAMETER: 0.094 INCHES NOMINAL
MOUNTING HOLE STYLE: 17D TWO MOUNTING HOLES/SLOTS, IN-LINE
MOUNTING METHOD: UNTHREADED HOLE
MOUNTING TYPE FOR WHICH DESIGNED: CHASSIS
OVERALL HEIGHT: 0.260 INCHES NOMINAL
OVERALL LENGTH: 0.400 INCHES NOMINAL
OVERALL WIDTH: 0.400 INCHES MAXIMUM
POLARIZATION TYPE: SLOT
TERMINAL LENGTH: 0.110 INCHES MINIMUM
TERMINAL TYPE AND QUANTITY: 8 TAB, SOLDER LUG
Related Searches:
C9308-02
SOCKET,PLUG-IN ELECTRONIC COMPONENTS
NSN, MFG P/N
5935003914671
NSN
5935-00-391-4671
C9308-02
SOCKET,PLUG-IN ELECTRONIC COMPONENTS
NSN, MFG P/N
5935003914671
NSN
5935-00-391-4671
MFG
TEXAS INSTRUMENTS INCORPORATED DBA TEXAS INSTRUMENTS DIV SEMICONDUCTOR GROUP
Description
ACCOMMODATED CONTACT QUANTITY: 8
BODY MATERIAL: POLYAMIDE NYLON
BODY STYLE: 69B TOP MOUNT
CONTACT MATERIAL: BERYLLIUM COPPER
CONTACT MAXIMUM CURRENT RATING IN AMPS: NOT RATED
CONTACT POSITION ARRANGEMENT STYLE: 1417A DUAL IN-LINE
CONTACT SURFACE TREATMENT: GOLD AND NICKEL
DISTANCE BETWEEN MOUNTING FACILITY CENTERS: 0.400 INCHES NOMINAL
III PRECIOUS MATERIAL: GOLD
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES GOLD
III PRECIOUS MATERIAL AND WEIGHT: 0.008 GOLD GRAINS, TROY
MOUNTING HOLE DIAMETER: 0.094 INCHES NOMINAL
MOUNTING HOLE STYLE: 17D TWO MOUNTING HOLES/SLOTS, IN-LINE
MOUNTING METHOD: UNTHREADED HOLE
MOUNTING TYPE FOR WHICH DESIGNED: CHASSIS
OVERALL HEIGHT: 0.260 INCHES NOMINAL
OVERALL LENGTH: 0.400 INCHES NOMINAL
OVERALL WIDTH: 0.400 INCHES MAXIMUM
POLARIZATION TYPE: SLOT
TERMINAL LENGTH: 0.110 INCHES MINIMUM
TERMINAL TYPE AND QUANTITY: 8 TAB, SOLDER LUG
Related Searches:
C930802
SOCKET,PLUG-IN ELECTRONIC COMPONENTS
NSN, MFG P/N
5935003914671
NSN
5935-00-391-4671
C930802
SOCKET,PLUG-IN ELECTRONIC COMPONENTS
NSN, MFG P/N
5935003914671
NSN
5935-00-391-4671
MFG
SENSATA TECHNOLOGIES INC
Description
ACCOMMODATED CONTACT QUANTITY: 8
BODY MATERIAL: POLYAMIDE NYLON
BODY STYLE: 69B TOP MOUNT
CONTACT MATERIAL: BERYLLIUM COPPER
CONTACT MAXIMUM CURRENT RATING IN AMPS: NOT RATED
CONTACT POSITION ARRANGEMENT STYLE: 1417A DUAL IN-LINE
CONTACT SURFACE TREATMENT: GOLD AND NICKEL
DISTANCE BETWEEN MOUNTING FACILITY CENTERS: 0.400 INCHES NOMINAL
III PRECIOUS MATERIAL: GOLD
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES GOLD
III PRECIOUS MATERIAL AND WEIGHT: 0.008 GOLD GRAINS, TROY
MOUNTING HOLE DIAMETER: 0.094 INCHES NOMINAL
MOUNTING HOLE STYLE: 17D TWO MOUNTING HOLES/SLOTS, IN-LINE
MOUNTING METHOD: UNTHREADED HOLE
MOUNTING TYPE FOR WHICH DESIGNED: CHASSIS
OVERALL HEIGHT: 0.260 INCHES NOMINAL
OVERALL LENGTH: 0.400 INCHES NOMINAL
OVERALL WIDTH: 0.400 INCHES MAXIMUM
POLARIZATION TYPE: SLOT
TERMINAL LENGTH: 0.110 INCHES MINIMUM
TERMINAL TYPE AND QUANTITY: 8 TAB, SOLDER LUG
Related Searches:
25431-42026
CONNECTOR,PLUG,ELECTRICAL
NSN, MFG P/N
5935003914712
NSN
5935-00-391-4712
25431-42026
CONNECTOR,PLUG,ELECTRICAL
NSN, MFG P/N
5935003914712
NSN
5935-00-391-4712
MFG
SELEX GALILEO LTD
Description
BODY STYLE: 7A STRAIGHT SHAPE, INTERNAL COUPLING
CONNECTOR LOCKING METHOD: BAYONET LATCH
CONTACT MATERIAL: COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE: AUAA 14-18 SINGLE MATING END
CONTACT REMOVABILITY: REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT: GOLD SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS27473T14B18S
ENVIRONMENTAL PROTECTION: MOISTURE RESISTANT AND VIBRATION RESISTANT AND SALT WATER RESISTANT
III OPERATING TEMP RATING: -65.0 DEG CELSIUS MINIMUM AND 175.0 DEG CELSIUS MAXIMUM
III PRECIOUS MATERIAL: GOLD
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES GOLD
III PRECIOUS MATERIAL AND WEIGHT: 0.018 GOLD GRAINS, TROY
INCLUDED CONTACT QUANTITY: 18 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE: ROUND SOCKET SINGLE MATING END SINGLE CONTACT GROUPING
INSERT POSITION IN DEG: 0.0 AND 100.0 AND 128.0 AND 228.0 AND 265.0
MANUFACTURERS CODE: 81349
MANUFACTURERS CODE: 96906
MATING END QUANTITY: 1
NOMINAL THREAD LENGTH: 0.219 INCHES
NOMINAL THREAD SIZE: 0.812 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MIL-C-38999
OVERALL DIAMETER: 1.156 INCHES MAXIMUM
OVERALL LENGTH: 0.766 INCHES NOMINAL
POLARIZATION METHOD: KEYWAY OR MULTIPLE KEYWAY
SHELL MATERIAL: ALUMINUM ALLOY
SHELL SURFACE TREATMENT: CADMIUM
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE
SHELL TYPE: SOLID
SPEC/STD CONTROLLING DATA:
SPECIFICATION/STANDARD DATA: 96906-MS27473 GOVERNMENT STANDARD
TERMINAL LOCATION: BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE: CRIMP SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT: 81349-MIL-C-38999 SPECIFICATION
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNEF
THREADED DEVICE TYPE: BACK SHELL
Related Searches:
414-2814-044
CONNECTOR,PLUG,ELECTRICAL
NSN, MFG P/N
5935003914712
NSN
5935-00-391-4712
414-2814-044
CONNECTOR,PLUG,ELECTRICAL
NSN, MFG P/N
5935003914712
NSN
5935-00-391-4712
MFG
BOEING COMPANY THE DBA BOEING DIV DEFENSE SPACE & SECURITY - NETWORK & SPACE SYSTEMS
Description
BODY STYLE: 7A STRAIGHT SHAPE, INTERNAL COUPLING
CONNECTOR LOCKING METHOD: BAYONET LATCH
CONTACT MATERIAL: COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE: AUAA 14-18 SINGLE MATING END
CONTACT REMOVABILITY: REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT: GOLD SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS27473T14B18S
ENVIRONMENTAL PROTECTION: MOISTURE RESISTANT AND VIBRATION RESISTANT AND SALT WATER RESISTANT
III OPERATING TEMP RATING: -65.0 DEG CELSIUS MINIMUM AND 175.0 DEG CELSIUS MAXIMUM
III PRECIOUS MATERIAL: GOLD
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES GOLD
III PRECIOUS MATERIAL AND WEIGHT: 0.018 GOLD GRAINS, TROY
INCLUDED CONTACT QUANTITY: 18 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE: ROUND SOCKET SINGLE MATING END SINGLE CONTACT GROUPING
INSERT POSITION IN DEG: 0.0 AND 100.0 AND 128.0 AND 228.0 AND 265.0
MANUFACTURERS CODE: 81349
MANUFACTURERS CODE: 96906
MATING END QUANTITY: 1
NOMINAL THREAD LENGTH: 0.219 INCHES
NOMINAL THREAD SIZE: 0.812 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MIL-C-38999
OVERALL DIAMETER: 1.156 INCHES MAXIMUM
OVERALL LENGTH: 0.766 INCHES NOMINAL
POLARIZATION METHOD: KEYWAY OR MULTIPLE KEYWAY
SHELL MATERIAL: ALUMINUM ALLOY
SHELL SURFACE TREATMENT: CADMIUM
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE
SHELL TYPE: SOLID
SPEC/STD CONTROLLING DATA:
SPECIFICATION/STANDARD DATA: 96906-MS27473 GOVERNMENT STANDARD
TERMINAL LOCATION: BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE: CRIMP SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT: 81349-MIL-C-38999 SPECIFICATION
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNEF
THREADED DEVICE TYPE: BACK SHELL
Related Searches:
MS27473E-14F-18S
CONNECTOR,PLUG,ELECTRICAL
NSN, MFG P/N
5935003914712
NSN
5935-00-391-4712
MS27473E-14F-18S
CONNECTOR,PLUG,ELECTRICAL
NSN, MFG P/N
5935003914712
NSN
5935-00-391-4712
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
BODY STYLE: 7A STRAIGHT SHAPE, INTERNAL COUPLING
CONNECTOR LOCKING METHOD: BAYONET LATCH
CONTACT MATERIAL: COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE: AUAA 14-18 SINGLE MATING END
CONTACT REMOVABILITY: REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT: GOLD SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS27473T14B18S
ENVIRONMENTAL PROTECTION: MOISTURE RESISTANT AND VIBRATION RESISTANT AND SALT WATER RESISTANT
III OPERATING TEMP RATING: -65.0 DEG CELSIUS MINIMUM AND 175.0 DEG CELSIUS MAXIMUM
III PRECIOUS MATERIAL: GOLD
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES GOLD
III PRECIOUS MATERIAL AND WEIGHT: 0.018 GOLD GRAINS, TROY
INCLUDED CONTACT QUANTITY: 18 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE: ROUND SOCKET SINGLE MATING END SINGLE CONTACT GROUPING
INSERT POSITION IN DEG: 0.0 AND 100.0 AND 128.0 AND 228.0 AND 265.0
MANUFACTURERS CODE: 81349
MANUFACTURERS CODE: 96906
MATING END QUANTITY: 1
NOMINAL THREAD LENGTH: 0.219 INCHES
NOMINAL THREAD SIZE: 0.812 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MIL-C-38999
OVERALL DIAMETER: 1.156 INCHES MAXIMUM
OVERALL LENGTH: 0.766 INCHES NOMINAL
POLARIZATION METHOD: KEYWAY OR MULTIPLE KEYWAY
SHELL MATERIAL: ALUMINUM ALLOY
SHELL SURFACE TREATMENT: CADMIUM
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE
SHELL TYPE: SOLID
SPEC/STD CONTROLLING DATA:
SPECIFICATION/STANDARD DATA: 96906-MS27473 GOVERNMENT STANDARD
TERMINAL LOCATION: BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE: CRIMP SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT: 81349-MIL-C-38999 SPECIFICATION
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNEF
THREADED DEVICE TYPE: BACK SHELL
Related Searches:
09P237395-21-11
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935003914948
NSN
5935-00-391-4948
09P237395-21-11
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935003914948
NSN
5935-00-391-4948
MFG
HERLEY CHICAGO DBA STEWART WARNER ELECTRONICS
Description
MATING END QUANTITY: 1
Related Searches:
3020165-004
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935003915136
NSN
5935-00-391-5136
3020165-004
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935003915136
NSN
5935-00-391-5136
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
BODY STYLE: 16G STRAIGHT SHAPE
CONTACT MATERIAL: COPPER ALLOY SINGLE MATING END ALL CONTACT GROUPINGS
CONTACT MAXIMUM CURRENT RATING IN AMPS: 7.5 SINGLE MATING END ALL CONTACT GROUPINGS
CONTACT POSITION ARRANGEMENT STYLE: BAAS 24W7 SINGLE MATING END
CONTACT REMOVABILITY: NONREMOVABLE SINGLE MATING END ALL CONTACT GROUPINGS
CONTACT SURFACE TREATMENT: GOLD AND SILVER SINGLE MATING END ALL CONTACT GROUPINGS
DISTANCE BETWEEN MOUNTING FACILITY CENTERS: 2.401 INCHES MINIMUM AND 2.411 INCHES MAXIMUM
III PRECIOUS MATERIAL: GOLD AND SILVER
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES GOLD AND CONTACT SURFACES SILVER
III PRECIOUS MATERIAL AND WEIGHT: 0.024 GOLD GRAINS, TROY AND 0.024 SILVER GRAINS, TROY
INCLUDED CONTACT QUANTITY: 7 SINGLE MATING END 1ST CONTACT GROUPING 17 SINGLE MATING END 2ND CONTACT GROUPING
INCLUDED CONTACT TYPE: ROUND SOCKET SINGLE MATING END ALL CONTACT GROUPINGS
INSERT MATERIAL: PLASTIC DIALLYL PHTHALATE SINGLE MATING END
MATING END QUANTITY: 1
OVERALL HEIGHT: 0.683 INCHES MAXIMUM
OVERALL LENGTH: 2.620 INCHES MINIMUM AND 2.650 INCHES MAXIMUM
OVERALL WIDTH: 0.590 INCHES MINIMUM AND 0.620 INCHES MAXIMUM
POLARIZATION METHOD: MATING END
SHELL MATERIAL: STEEL
SHELL SURFACE TREATMENT: CADMIUM
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE
SHELL TYPE: SOLID
TERMINAL LOCATION: BACK SINGLE MATING END ALL CONTACT GROUPINGS
TERMINAL TYPE: SOLDER WELL SINGLE MATING END ALL CONTACT GROUPINGS
UNTHREADED MOUNTING HOLE DIAMETER: 0.086 INCHES MINIMUM AND 0.091 INCHES MAXIMUM
Related Searches:
DDM43403-66
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935003915136
NSN
5935-00-391-5136
DDM43403-66
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935003915136
NSN
5935-00-391-5136
MFG
ITT CORPORATION DBA I T T CANNON
Description
BODY STYLE: 16G STRAIGHT SHAPE
CONTACT MATERIAL: COPPER ALLOY SINGLE MATING END ALL CONTACT GROUPINGS
CONTACT MAXIMUM CURRENT RATING IN AMPS: 7.5 SINGLE MATING END ALL CONTACT GROUPINGS
CONTACT POSITION ARRANGEMENT STYLE: BAAS 24W7 SINGLE MATING END
CONTACT REMOVABILITY: NONREMOVABLE SINGLE MATING END ALL CONTACT GROUPINGS
CONTACT SURFACE TREATMENT: GOLD AND SILVER SINGLE MATING END ALL CONTACT GROUPINGS
DISTANCE BETWEEN MOUNTING FACILITY CENTERS: 2.401 INCHES MINIMUM AND 2.411 INCHES MAXIMUM
III PRECIOUS MATERIAL: GOLD AND SILVER
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES GOLD AND CONTACT SURFACES SILVER
III PRECIOUS MATERIAL AND WEIGHT: 0.024 GOLD GRAINS, TROY AND 0.024 SILVER GRAINS, TROY
INCLUDED CONTACT QUANTITY: 7 SINGLE MATING END 1ST CONTACT GROUPING 17 SINGLE MATING END 2ND CONTACT GROUPING
INCLUDED CONTACT TYPE: ROUND SOCKET SINGLE MATING END ALL CONTACT GROUPINGS
INSERT MATERIAL: PLASTIC DIALLYL PHTHALATE SINGLE MATING END
MATING END QUANTITY: 1
OVERALL HEIGHT: 0.683 INCHES MAXIMUM
OVERALL LENGTH: 2.620 INCHES MINIMUM AND 2.650 INCHES MAXIMUM
OVERALL WIDTH: 0.590 INCHES MINIMUM AND 0.620 INCHES MAXIMUM
POLARIZATION METHOD: MATING END
SHELL MATERIAL: STEEL
SHELL SURFACE TREATMENT: CADMIUM
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE
SHELL TYPE: SOLID
TERMINAL LOCATION: BACK SINGLE MATING END ALL CONTACT GROUPINGS
TERMINAL TYPE: SOLDER WELL SINGLE MATING END ALL CONTACT GROUPINGS
UNTHREADED MOUNTING HOLE DIAMETER: 0.086 INCHES MINIMUM AND 0.091 INCHES MAXIMUM
Related Searches:
81304-33
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935003915220
NSN
5935-00-391-5220
81304-33
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935003915220
NSN
5935-00-391-5220
MFG
HAMILTON SUNDSTRAND CORPORATION
Description
BODY STYLE: 16G STRAIGHT SHAPE
CONTACT MATERIAL: COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-530 FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS: 330.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM CURRENT RATING IN AMPS: 5.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE: AAAE 2 ROWS OF CONTACTS NON-INSERTED BOARD SINGLE MATING END
CONTACT REMOVABILITY: REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT: GOLD SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-G-45204,TYPE 1,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
DISTANCE BETWEEN MOUNTING FACILITY CENTERS: 4.095 INCHES MINIMUM AND 4.105 INCHES MAXIMUM
ENVIRONMENTAL PROTECTION: MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT
GUIDE DESIGN AND LOCATION: D SHAPE PIN LEFT-HAND AT 3 OCLOCK D SHAPE SOCKET RIGHT-HAND AT 12 OCLOCK
III PRECIOUS MATERIAL: GOLD
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES GOLD
III PRECIOUS MATERIAL AND WEIGHT: 0.070 GOLD GRAINS, TROY
INCLUDED CONTACT QUANTITY: 70 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE: ROUND SOCKET SINGLE MATING END SINGLE CONTACT GROUPING
INSERT MATERIAL: PLASTIC DIALLYL PHTHALATE SINGLE MATING END
INSERT MATERIAL DOCUMENT AND CLASSIFICATION: MIL-P-19833,GD1-30F MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END
MATING END QUANTITY: 1
OVERALL HEIGHT: 0.715 INCHES NOMINAL
OVERALL LENGTH: 4.340 INCHES MINIMUM AND 4.360 INCHES MAXIMUM
OVERALL WIDTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
POLARIZATION METHOD: GUIDE PIN/SOCKET
TERMINAL LOCATION: BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE: CRIMP SINGLE MATING END SINGLE CONTACT GROUPING
UNTHREADED MOUNTING HOLE DIAMETER: 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
Related Searches:
WTK70SSY477-2QCS63H
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935003915220
NSN
5935-00-391-5220
WTK70SSY477-2QCS63H
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935003915220
NSN
5935-00-391-5220
MFG
AIRBORN INTERCONNECT INC. DBA AIRBORN
Description
BODY STYLE: 16G STRAIGHT SHAPE
CONTACT MATERIAL: COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-530 FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS: 330.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM CURRENT RATING IN AMPS: 5.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE: AAAE 2 ROWS OF CONTACTS NON-INSERTED BOARD SINGLE MATING END
CONTACT REMOVABILITY: REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT: GOLD SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-G-45204,TYPE 1,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
DISTANCE BETWEEN MOUNTING FACILITY CENTERS: 4.095 INCHES MINIMUM AND 4.105 INCHES MAXIMUM
ENVIRONMENTAL PROTECTION: MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT
GUIDE DESIGN AND LOCATION: D SHAPE PIN LEFT-HAND AT 3 OCLOCK D SHAPE SOCKET RIGHT-HAND AT 12 OCLOCK
III PRECIOUS MATERIAL: GOLD
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES GOLD
III PRECIOUS MATERIAL AND WEIGHT: 0.070 GOLD GRAINS, TROY
INCLUDED CONTACT QUANTITY: 70 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE: ROUND SOCKET SINGLE MATING END SINGLE CONTACT GROUPING
INSERT MATERIAL: PLASTIC DIALLYL PHTHALATE SINGLE MATING END
INSERT MATERIAL DOCUMENT AND CLASSIFICATION: MIL-P-19833,GD1-30F MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END
MATING END QUANTITY: 1
OVERALL HEIGHT: 0.715 INCHES NOMINAL
OVERALL LENGTH: 4.340 INCHES MINIMUM AND 4.360 INCHES MAXIMUM
OVERALL WIDTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
POLARIZATION METHOD: GUIDE PIN/SOCKET
TERMINAL LOCATION: BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE: CRIMP SINGLE MATING END SINGLE CONTACT GROUPING
UNTHREADED MOUNTING HOLE DIAMETER: 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
Related Searches:
5935003915236
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935003915236
NSN
5935-00-391-5236
5935003915236
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935003915236
NSN
5935-00-391-5236
MFG
E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES
Description
BODY STYLE: 5G STRAIGHT SHAPE, EXTERNAL COUPLING W/BACKSHELL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT: 1.250 INCHES NOMINAL
CONNECTOR LOCKING METHOD: BAYONET PIN
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS: 600.0 SINGLE MATING END ALL CONTACT GROUPINGS
CONTACT POSITION ARRANGEMENT STYLE: BTAB 22-41 SINGLE MATING END
CONTACT REMOVABILITY: REMOVABLE SINGLE MATING END ALL CONTACT GROUPINGS
CONTACT SURFACE TREATMENT: GOLD AND NICKEL SINGLE MATING END ALL CONTACT GROUPINGS
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-G-45204 TY 1,CL 1,GRADE C MIL SPEC 1ST TREATMENT RESPONSE AND QQ-N-290 GRADE E FED SPEC 2ND TREATMENT RESPONSE SINGLE MATING END ALL CONTACT GROUPINGS
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS3127E22-41S
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH: 1.250 INCHES NOMINAL
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE: 0.556 INCHES MINIMUM AND 0.587 INCHES MAXIMUM
ENVIRONMENTAL PROTECTION: MOISTURE RESISTANT AND VIBRATION RESISTANT AND SALT WATER RESISTANT
III PRECIOUS MATERIAL: GOLD
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES GOLD
III PRECIOUS MATERIAL AND WEIGHT: 0.041 GOLD GRAINS, TROY
INCLUDED CONTACT QUANTITY: 14 SINGLE MATING END 1ST CONTACT GROUPING 27 SINGLE MATING END 2ND CONTACT GROUPING
INCLUDED CONTACT TYPE: ROUND SOCKET SINGLE MATING END ALL CONTACT GROUPINGS
INSERT POSITION IN DEG: 0.0
MANUFACTURERS CODE: 81349
MANUFACTURERS CODE: 96906
MATING END QUANTITY: 1
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MIL-C-26482
OVERALL HEIGHT: 1.766 INCHES MAXIMUM
OVERALL LENGTH: 1.328 INCHES MAXIMUM
OVERALL WIDTH: 1.766 INCHES MAXIMUM
POLARIZATION METHOD: KEYWAY OR MULTIPLE KEYWAY
SHELL MATERIAL: ALUMINUM ALLOY
SHELL MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-591 FED SPEC SINGLE MATERIAL RESPONSE
SHELL SURFACE TREATMENT: CADMIUM
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SHELL TYPE: SOLID
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: FOUR 0.150 IN. DIA INTERSECTED MTG HOLES SPACED 1.375 IN. BY 1.375 IN.
SPECIFICATION/STANDARD DATA: 96906-MS3127 GOVERNMENT STANDARD
TERMINAL LOCATION: BACK SINGLE MATING END ALL CONTACT GROUPINGS
TERMINAL TYPE: CRIMP SINGLE MATING END ALL CONTACT GROUPINGS
TEST DATA DOCUMENT: 81349-MIL-C-26482 SPECIFICATION
UNTHREADED MOUNTING HOLE DIAMETER: 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
Related Searches:
MS3127E22-41S
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935003915236
NSN
5935-00-391-5236
MS3127E22-41S
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935003915236
NSN
5935-00-391-5236
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
BODY STYLE: 5G STRAIGHT SHAPE, EXTERNAL COUPLING W/BACKSHELL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT: 1.250 INCHES NOMINAL
CONNECTOR LOCKING METHOD: BAYONET PIN
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS: 600.0 SINGLE MATING END ALL CONTACT GROUPINGS
CONTACT POSITION ARRANGEMENT STYLE: BTAB 22-41 SINGLE MATING END
CONTACT REMOVABILITY: REMOVABLE SINGLE MATING END ALL CONTACT GROUPINGS
CONTACT SURFACE TREATMENT: GOLD AND NICKEL SINGLE MATING END ALL CONTACT GROUPINGS
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-G-45204 TY 1,CL 1,GRADE C MIL SPEC 1ST TREATMENT RESPONSE AND QQ-N-290 GRADE E FED SPEC 2ND TREATMENT RESPONSE SINGLE MATING END ALL CONTACT GROUPINGS
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS3127E22-41S
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH: 1.250 INCHES NOMINAL
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE: 0.556 INCHES MINIMUM AND 0.587 INCHES MAXIMUM
ENVIRONMENTAL PROTECTION: MOISTURE RESISTANT AND VIBRATION RESISTANT AND SALT WATER RESISTANT
III PRECIOUS MATERIAL: GOLD
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES GOLD
III PRECIOUS MATERIAL AND WEIGHT: 0.041 GOLD GRAINS, TROY
INCLUDED CONTACT QUANTITY: 14 SINGLE MATING END 1ST CONTACT GROUPING 27 SINGLE MATING END 2ND CONTACT GROUPING
INCLUDED CONTACT TYPE: ROUND SOCKET SINGLE MATING END ALL CONTACT GROUPINGS
INSERT POSITION IN DEG: 0.0
MANUFACTURERS CODE: 81349
MANUFACTURERS CODE: 96906
MATING END QUANTITY: 1
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MIL-C-26482
OVERALL HEIGHT: 1.766 INCHES MAXIMUM
OVERALL LENGTH: 1.328 INCHES MAXIMUM
OVERALL WIDTH: 1.766 INCHES MAXIMUM
POLARIZATION METHOD: KEYWAY OR MULTIPLE KEYWAY
SHELL MATERIAL: ALUMINUM ALLOY
SHELL MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-591 FED SPEC SINGLE MATERIAL RESPONSE
SHELL SURFACE TREATMENT: CADMIUM
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SHELL TYPE: SOLID
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: FOUR 0.150 IN. DIA INTERSECTED MTG HOLES SPACED 1.375 IN. BY 1.375 IN.
SPECIFICATION/STANDARD DATA: 96906-MS3127 GOVERNMENT STANDARD
TERMINAL LOCATION: BACK SINGLE MATING END ALL CONTACT GROUPINGS
TERMINAL TYPE: CRIMP SINGLE MATING END ALL CONTACT GROUPINGS
TEST DATA DOCUMENT: 81349-MIL-C-26482 SPECIFICATION
UNTHREADED MOUNTING HOLE DIAMETER: 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM