My Quote Request
5985-01-037-5355
20 Products
86603-60109
ATTENUATOR SUBASSEMBLY
NSN, MFG P/N
5985010375355
NSN
5985-01-037-5355
MFG
AGILENT TECHNOLOGIES INC. DBA NORTH AMERICAN CONTACT CENTER DIV AGILENT BUSINESS CENTER
Description
DESIGN CONTROL REFERENCE: 86603-60043
END ITEM IDENTIFICATION: HP RF SECTION PLUG-IN MODULE P/N 86601 OR 86603;HP SIGNAL GENERATOR P/N8660D
MANUFACTURERS CODE: 1LQK8
THE MANUFACTURERS DATA:
Related Searches:
86603-60043
ATTENUATOR SUBASSEMBLY
NSN, MFG P/N
5985010375355
NSN
5985-01-037-5355
MFG
AGILENT TECHNOLOGIES INC. DBA NORTH AMERICAN CONTACT CENTER DIV AGILENT BUSINESS CENTER
Description
DESIGN CONTROL REFERENCE: 86603-60043
END ITEM IDENTIFICATION: HP RF SECTION PLUG-IN MODULE P/N 86601 OR 86603;HP SIGNAL GENERATOR P/N8660D
MANUFACTURERS CODE: 1LQK8
THE MANUFACTURERS DATA:
Related Searches:
349D312
ANTENNA
NSN, MFG P/N
5985010375526
NSN
5985-01-037-5526
MFG
NORTHROP GRUMMAN SYSTEMS CORPORATION DIV NORTHROP GRUMMAN SYSTEMS CORPORATION ELECTRONIC SYSTEMS
Description
BEAM SCANNING METHOD: FIXED SINGLE ANTENNA ELEMENT
CHARACTERISTIC IMPEDANCE IN OHMS: 51.0 SINGLE ANTENNA ELEMENT
DESIGN CONTROL REFERENCE: 349D312G01
DESIGN TYPE: CORNER REFLECTOR SINGLE ANTENNA ELEMENT
ELECTROMAGNETIC POLARIZATION TYPE: VERTICAL OR HORIZONTAL SINGLE ANTENNA ELEMENT
FREQUENCY RATING: 1030.000 MEGAHERTZ NOMINAL AND 1090.000 MEGAHERTZ NOMINAL SINGLE ANTENNA ELEMENT
III END ITEM IDENTIFICATION: RADAR SET,AN/TPS-43E
III FUNCTIONAL DESCRIPTION: PROVIDES INTERROGATOR SIDE LOBE SUPPRESSION (ISLS) CAPABILITY WHEN USED WITH CONTROL MONITOR C-9089/UPX AND REMOTE ANTENNA AS-4008/T,A BACKFILL RADIATOR
MANUFACTURERS CODE: 97942
MOUNTING HOLE DIAMETER: 0.375 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
MOUNTING HOLE QUANTITY: 8 OR 2
MOUNTING METHOD: THREADED HOLE AND UNTHREADED HOLE
OVERALL HEIGHT: 9.500 INCHES NOMINAL
OVERALL LENGTH: 111.750 INCHES NOMINAL
OVERALL WIDTH: 18.620 INCHES NOMINAL
POWER RATING: 10.000 KILOWATTS PEAK SINGLE ANTENNA ELEMENT
RADIATION PATTERN: OMNIDIRECTIONAL SINGLE ANTENNA ELEMENT
SPECIAL FEATURES: NO TUBES OR CRYSTALS ARE USED; TO BE USED WITH REMOTE BACKFILL RADIATOR; INCLUDES BRACKETS FOR UNIT STORAGE IN TRANSPORT MODE
TERMINAL TYPE: CONNECTOR, RECEPTACLE SINGLE ANTENNA ELEMENT
THE MANUFACTURERS DATA:
Related Searches:
349D312G01
ANTENNA
NSN, MFG P/N
5985010375526
NSN
5985-01-037-5526
MFG
NORTHROP GRUMMAN SYSTEMS CORPORATION DIV NORTHROP GRUMMAN SYSTEMS CORPORATION ELECTRONIC SYSTEMS
Description
BEAM SCANNING METHOD: FIXED SINGLE ANTENNA ELEMENT
CHARACTERISTIC IMPEDANCE IN OHMS: 51.0 SINGLE ANTENNA ELEMENT
DESIGN CONTROL REFERENCE: 349D312G01
DESIGN TYPE: CORNER REFLECTOR SINGLE ANTENNA ELEMENT
ELECTROMAGNETIC POLARIZATION TYPE: VERTICAL OR HORIZONTAL SINGLE ANTENNA ELEMENT
FREQUENCY RATING: 1030.000 MEGAHERTZ NOMINAL AND 1090.000 MEGAHERTZ NOMINAL SINGLE ANTENNA ELEMENT
III END ITEM IDENTIFICATION: RADAR SET,AN/TPS-43E
III FUNCTIONAL DESCRIPTION: PROVIDES INTERROGATOR SIDE LOBE SUPPRESSION (ISLS) CAPABILITY WHEN USED WITH CONTROL MONITOR C-9089/UPX AND REMOTE ANTENNA AS-4008/T,A BACKFILL RADIATOR
MANUFACTURERS CODE: 97942
MOUNTING HOLE DIAMETER: 0.375 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
MOUNTING HOLE QUANTITY: 8 OR 2
MOUNTING METHOD: THREADED HOLE AND UNTHREADED HOLE
OVERALL HEIGHT: 9.500 INCHES NOMINAL
OVERALL LENGTH: 111.750 INCHES NOMINAL
OVERALL WIDTH: 18.620 INCHES NOMINAL
POWER RATING: 10.000 KILOWATTS PEAK SINGLE ANTENNA ELEMENT
RADIATION PATTERN: OMNIDIRECTIONAL SINGLE ANTENNA ELEMENT
SPECIAL FEATURES: NO TUBES OR CRYSTALS ARE USED; TO BE USED WITH REMOTE BACKFILL RADIATOR; INCLUDES BRACKETS FOR UNIT STORAGE IN TRANSPORT MODE
TERMINAL TYPE: CONNECTOR, RECEPTACLE SINGLE ANTENNA ELEMENT
THE MANUFACTURERS DATA:
Related Searches:
AS-4007/T
ANTENNA
NSN, MFG P/N
5985010375526
NSN
5985-01-037-5526
MFG
JOINT ELECTRONICS TYPE DESIGNATION SYSTEM
Description
BEAM SCANNING METHOD: FIXED SINGLE ANTENNA ELEMENT
CHARACTERISTIC IMPEDANCE IN OHMS: 51.0 SINGLE ANTENNA ELEMENT
DESIGN CONTROL REFERENCE: 349D312G01
DESIGN TYPE: CORNER REFLECTOR SINGLE ANTENNA ELEMENT
ELECTROMAGNETIC POLARIZATION TYPE: VERTICAL OR HORIZONTAL SINGLE ANTENNA ELEMENT
FREQUENCY RATING: 1030.000 MEGAHERTZ NOMINAL AND 1090.000 MEGAHERTZ NOMINAL SINGLE ANTENNA ELEMENT
III END ITEM IDENTIFICATION: RADAR SET,AN/TPS-43E
III FUNCTIONAL DESCRIPTION: PROVIDES INTERROGATOR SIDE LOBE SUPPRESSION (ISLS) CAPABILITY WHEN USED WITH CONTROL MONITOR C-9089/UPX AND REMOTE ANTENNA AS-4008/T,A BACKFILL RADIATOR
MANUFACTURERS CODE: 97942
MOUNTING HOLE DIAMETER: 0.375 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
MOUNTING HOLE QUANTITY: 8 OR 2
MOUNTING METHOD: THREADED HOLE AND UNTHREADED HOLE
OVERALL HEIGHT: 9.500 INCHES NOMINAL
OVERALL LENGTH: 111.750 INCHES NOMINAL
OVERALL WIDTH: 18.620 INCHES NOMINAL
POWER RATING: 10.000 KILOWATTS PEAK SINGLE ANTENNA ELEMENT
RADIATION PATTERN: OMNIDIRECTIONAL SINGLE ANTENNA ELEMENT
SPECIAL FEATURES: NO TUBES OR CRYSTALS ARE USED; TO BE USED WITH REMOTE BACKFILL RADIATOR; INCLUDES BRACKETS FOR UNIT STORAGE IN TRANSPORT MODE
TERMINAL TYPE: CONNECTOR, RECEPTACLE SINGLE ANTENNA ELEMENT
THE MANUFACTURERS DATA:
Related Searches:
317207-2
DUMMY LOAD,ELECTRICAL
NSN, MFG P/N
5985010375584
NSN
5985-01-037-5584
MFG
L-3 COMMUNICATIONS CINCINNATI ELECTRONICS CORPORATION
Description
COAXIAL CONNECTOR SERIES DESIGNATION: SMA
CONNECTOR END DESIGN: MALE
DESIGN CONTROL REFERENCE: 317207-2
FREQUENCY RANGE RATING: 0.100 TO 16.000 GIGAHERTZ
IMPEDANCE RATING IN OHMS: 50.0 NOMINAL
MANUFACTURERS CODE: 80045
TERMINATION TYPE: CONNECTION COAXIAL
THE MANUFACTURERS DATA:
VOLTAGE STANDING WAVE RATIO: 1.15
Related Searches:
SM-B-752665
SUPPORT,ANTENNA
NSN, MFG P/N
5985010375641
NSN
5985-01-037-5641
MFG
US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR
Description
III END ITEM IDENTIFICATION: RADAR SET AN/PPS-15; RADAR SET AN/PPS-15(V)1
III FSC APPLICATION DATA: ANTENNAS,WAVEGUIDES,AND RELATED EQUIPMENT
MATERIAL: ALUMINUM ALLOY AND STEEL
MOUNTING METHOD: RING
SURFACE TREATMENT: CHEMICAL FILM AND PASSIVATED
Related Searches:
608J456G01
COUPLER,ROTARY,RADIO FREQUENCY
NSN, MFG P/N
5985010375808
NSN
5985-01-037-5808
608J456G01
COUPLER,ROTARY,RADIO FREQUENCY
NSN, MFG P/N
5985010375808
NSN
5985-01-037-5808
MFG
NORTHROP GRUMMAN SYSTEMS CORPORATION DIV NORTHROP GRUMMAN SYSTEMS CORPORATION ELECTRONIC SYSTEMS
Description
DESIGN CONTROL REFERENCE: 608J456G01
III END ITEM IDENTIFICATION: AN/TPS43-E
MANUFACTURERS CODE: 97942
THE MANUFACTURERS DATA:
UNIT TYPE: WAVEGUIDE
Related Searches:
8142S
ATTENUATOR,VARIABLE
NSN, MFG P/N
5985010376317
NSN
5985-01-037-6317
MFG
TELONIC BERKELEY INC.
Description
ADJUSTMENT DEVICE TYPE AND QUANTITY: 1 KNOB
APPLICATION DESIGN: TRANSMISSION LINE
ATTENUATION PER STEP IN DECIBELS: 1.0
ATTENUATION VARIATION METHOD: STEPPED
BODY STYLE: 28A COAXIAL TYPE
COAXIAL CONNECTOR SERIES DESIGNATION: SMA
FREQUENCY RANGE: 0.000 HERTZ MINIMUM AND 2.000 GIGAHERTZ MAXIMUM
III OPERATING TEMP RANGE: -0.0 TO 85.0 DEG CELSIUS
III SCALE DIVISION QUANTITY: 69
III SCALE LINEARITY: LINEAR
IMPEDANCE RATING IN OHMS: 50.0 INPUT-OUTPUT
INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS: 0.2
MOUNTING FACILITY TYPE AND QUANTITY: 2 CONNECTOR
OVERALL ATTENUATION ACCURACY IN DECIBELS: -0.20 TO 0.20
OVERALL ATTENUATION RANGE IN DECIBELS: 0.0 TO 69.0
OVERALL HEIGHT: 1.380 INCHES NOMINAL
OVERALL LENGTH: 6.150 INCHES NOMINAL
OVERALL WIDTH: 1.260 INCHES NOMINAL
POWER RATING: 3.0 WATTS AVERAGE AND 1.0 KILOWATTS PEAK
STEP POSITION QUANTITY: 69
TERMINAL TYPE AND QUANTITY: 2 CONNECTOR, COAXIAL, FEMALE
VOLTAGE STANDING WAVE RATIO: 1.30
Related Searches:
616Z129-1
PRESSURE SEAL PLATE
NSN, MFG P/N
5985010376761
NSN
5985-01-037-6761
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN DIV LOCKHEED MARTIN AERONAUTICS COMPANY
Description
DESIGN CONTROL REFERENCE: 616Z129-1
GENERAL CHARACTERISTICS ITEM DESCRIPTION: ENABLE MAINTENANCE OF OFF LINE CHANNEL WAVEGUIDE SYSTEM AND KLYSTRON WHILE ALTERNATE CHANNEL IS OPERATIONAL,INCLUDES QUICK RELEASE MECHANISM AND CANVAS BAG
MANUFACTURERS CODE: 81755
THE MANUFACTURERS DATA:
Related Searches:
700727
WAVEGUIDE ASSEMBLY
NSN, MFG P/N
5985010376870
NSN
5985-01-037-6870
MFG
CRSI INC DELAWARE DIV GENERAL DYNAMICS SATCOM TECHNOLOGIES INC.
Description
CROSS-SECTIONAL SHAPE STYLE: A1 INTERNAL, RECTANGULAR EXTERNAL, RECTANGULAR
DESIGN CONTROL REFERENCE: 700727
FLANGE INSIDE HEIGHT: 1.145 INCHES NOMINAL FIRST FLANGE 0.872 INCHES NOMINAL SECOND FLANGE
FLANGE INSIDE WIDTH: 2.290 INCHES NOMINAL FIRST FLANGE 1.872 INCHES NOMINAL SECOND FLANGE
FLANGE QUANTITY: 2
FLANGE STYLE: C7 CONTACT TYPE FIRST FLANGE C26 COVER TYPE SECOND FLANGE
FLEXIBILITY: RIGID ALL TUBING SEGMENT
MANUFACTURERS CODE: 19564
MATERIAL: ALUMINUM ALLOY 6061 ALL TUBING SEGMENT
STYLE DESIGNATOR: B1 STRAIGHT TYPE
THE MANUFACTURERS DATA:
TUBING WALL CONSTRUCTION STYLE: J1 SEAMLESS ALL TUBING SEGMENT
WAVEGUIDE INSIDE HEIGHT: 1.145 INCHES NOMINAL
WAVEGUIDE INSIDE WIDTH: 2.290 INCHES NOMINAL
WAVEGUIDE LENGTH: 8.375 INCHES NOMINAL
Related Searches:
905A
DUMMY LOAD,ELECTRICAL
NSN, MFG P/N
5985010377044
NSN
5985-01-037-7044
MFG
AGILENT TECHNOLOGIES INC. DBA NORTH AMERICAN CONTACT CENTER DIV AGILENT BUSINESS CENTER
Description
DESIGN CONTROL REFERENCE: 905A
FREQUENCY RANGE RATING: 1.800 TO 18.000 GIGAHERTZ
IMPEDANCE RATING IN OHMS: 50.0 NOMINAL
MANUFACTURERS CODE: 1LQK8
POWER RATING: 5.000 KILOWATTS PEAK AND 1.000 WATTS AVERAGE
TERMINATION TYPE: CONNECTION COAXIAL
THE MANUFACTURERS DATA:
VOLTAGE STANDING WAVE RATIO: 1.05
VOLTAGE STANDING WAVE RATIO FREQUENCY RANGE: 1.800 TO 18.000 GIGAHERTZ
Related Searches:
1H0566-3
COUPLER,DIRECTIONAL
NSN, MFG P/N
5985010377074
NSN
5985-01-037-7074
MFG
ANAREN INC. DIV ANAREN MICROWAVE INC.
Description
DESIGN TYPE: BIDIRECTIONAL
III FSC APPLICATION DATA: ANTENNAS,WAVEGUIDES,AND RELATED EQUIPMENT
III UNPACKAGED UNIT WEIGHT: 1.400 OUNCES
OVERALL HEIGHT: 1.320 INCHES NOMINAL
OVERALL LENGTH: 1.610 INCHES NOMINAL
OVERALL WIDTH: 0.520 INCHES NOMINAL
POWER LOSS IN DECIBELS: 3.0
RADIO FREQUENCY RATING: 2.0 GIGAHERTZ MINIMUM AND 4.0 GIGAHERTZ MAXIMUM
UNIT TYPE: TRANSMISSION LINE
VOLTAGE STANDING WAVE RATIO AT REFERENCE FREQUENCY: 1.25 TO 1 AT 2 TO 4 GHZ
Related Searches:
352250023712
COUPLER,DIRECTIONAL
NSN, MFG P/N
5985010377074
NSN
5985-01-037-7074
MFG
THALES NEDERLAND
Description
DESIGN TYPE: BIDIRECTIONAL
III FSC APPLICATION DATA: ANTENNAS,WAVEGUIDES,AND RELATED EQUIPMENT
III UNPACKAGED UNIT WEIGHT: 1.400 OUNCES
OVERALL HEIGHT: 1.320 INCHES NOMINAL
OVERALL LENGTH: 1.610 INCHES NOMINAL
OVERALL WIDTH: 0.520 INCHES NOMINAL
POWER LOSS IN DECIBELS: 3.0
RADIO FREQUENCY RATING: 2.0 GIGAHERTZ MINIMUM AND 4.0 GIGAHERTZ MAXIMUM
UNIT TYPE: TRANSMISSION LINE
VOLTAGE STANDING WAVE RATIO AT REFERENCE FREQUENCY: 1.25 TO 1 AT 2 TO 4 GHZ
Related Searches:
1H0567-3
COUPLER,DIRECTIONAL
NSN, MFG P/N
5985010377075
NSN
5985-01-037-7075
MFG
ANAREN INC. DIV ANAREN MICROWAVE INC.
Description
DESIGN CONTROL REFERENCE: 1H0567-3
MANUFACTURERS CODE: 31597
OVERALL HEIGHT: 1.320 INCHES NOMINAL
OVERALL LENGTH: 1.080 INCHES NOMINAL
OVERALL WIDTH: 0.520 INCHES NOMINAL
POWER LOSS IN DECIBELS: 0.35
RADIO FREQUENCY RATING: 4.0 GIGAHERTZ MINIMUM AND 8.0 GIGAHERTZ MAXIMUM
THE MANUFACTURERS DATA:
UNIT TYPE: WAVEGUIDE
VOLTAGE STANDING WAVE RATIO AT REFERENCE FREQUENCY: 1.30 MAX AT 8.0 GHZ
Related Searches:
352250023713
COUPLER,DIRECTIONAL
NSN, MFG P/N
5985010377075
NSN
5985-01-037-7075
MFG
THALES NEDERLAND
Description
DESIGN CONTROL REFERENCE: 1H0567-3
MANUFACTURERS CODE: 31597
OVERALL HEIGHT: 1.320 INCHES NOMINAL
OVERALL LENGTH: 1.080 INCHES NOMINAL
OVERALL WIDTH: 0.520 INCHES NOMINAL
POWER LOSS IN DECIBELS: 0.35
RADIO FREQUENCY RATING: 4.0 GIGAHERTZ MINIMUM AND 8.0 GIGAHERTZ MAXIMUM
THE MANUFACTURERS DATA:
UNIT TYPE: WAVEGUIDE
VOLTAGE STANDING WAVE RATIO AT REFERENCE FREQUENCY: 1.30 MAX AT 8.0 GHZ
Related Searches:
1810266
WAVEGUIDE ASSEMBLY
NSN, MFG P/N
5985010377352
NSN
5985-01-037-7352
MFG
NORTHROP GRUMMAN SYSTEMS CORPORATION
Description
(NON-CORE DATA) FLANGE MANUFACTURER PART NUMBER: M3922/53-002
(NON-CORE DATA) FRAGILITY FACTOR: MODERATELY RUGGED
(NON-CORE DATA) TUBING MANUFACTURER PART NUMBER: M85/1-073
CROSS-SECTIONAL SHAPE STYLE: A1 INTERNAL, RECTANGULAR EXTERNAL, RECTANGULAR
FLANGE CONNECTING FACILITY AND QUANTITY: 4 UNTHREADED HOLE ALL FLANGES ALL CONNECTION FACILITIES
FLANGE CONNECTING HOLE DIAMETER: 0.169 INCHES MINIMUM AND 0.172 INCHES MAXIMUM ALL FLANGES ALL CONNECTION FACILITIES
FLANGE DEPTH: 0.423 INCHES MINIMUM AND 0.453 INCHES MAXIMUM ALL FLANGES
FLANGE INSIDE HEIGHT: 0.628 INCHES MINIMUM AND 0.631 INCHES MAXIMUM ALL FLANGES
FLANGE INSIDE WIDTH: 1.253 INCHES MINIMUM AND 1.256 INCHES MAXIMUM ALL FLANGES
FLANGE OUTSIDE HEIGHT: 1.860 INCHES MINIMUM AND 1.890 INCHES MAXIMUM ALL FLANGES
FLANGE OUTSIDE WIDTH: 1.860 INCHES MINIMUM AND 1.890 INCHES MAXIMUM ALL FLANGES
FLANGE QUANTITY: 2
FLANGE STYLE: C28 COVER TYPE ALL FLANGES
FLEXIBILITY: RIGID SINGLE TUBING SEGMENT
III FSC APPLICATION DATA: ANTENNAS,WAVEGUIDES,AND RELATED EQUIPMENT
III PRECIOUS MATERIAL: SILVER
III PRECIOUS MATERIAL AND LOCATION: INTERNAL SURFACES SILVER
MATERIAL: COPPER ALLOY ALL TUBING SEGMENT AND FLANGE
STYLE DESIGNATOR: B1 STRAIGHT TYPE
SURFACE TREATMENT: SILVER ALL TUBING SEGMENT AND FLANGE INSIDE SURFACES PAINT ALL TUBING SEGMENT AND FLANGE OUTSIDE SURFACES
TUBING TWIST ANGLE IN DEG: 90.0 SINGLE TUBING SEGMENT
TUBING TWIST TYPE: STRAIGHT TWIST SINGLE TUBING SEGMENT
TUBING WALL CONSTRUCTION STYLE: J1 SEAMLESS SINGLE TUBING SEGMENT
VOLTAGE STANDING WAVE RATIO: 1.05
WAVEGUIDE INSIDE HEIGHT: 0.493 INCHES MINIMUM AND 0.501 INCHES MAXIMUM
WAVEGUIDE INSIDE WIDTH: 1.118 INCHES MINIMUM AND 1.126 INCHES MAXIMUM
WAVEGUIDE LENGTH: 6.000 INCHES NOMINAL
WAVEGUIDE OUTSIDE HEIGHT: 0.621 INCHES MINIMUM AND 0.629 INCHES MAXIMUM
WAVEGUIDE OUTSIDE WIDTH: 1.246 INCHES MINIMUM AND 1.254 INCHES MAXIMUM
Related Searches:
590-2
WAVEGUIDE ASSEMBLY
NSN, MFG P/N
5985010377352
NSN
5985-01-037-7352
MFG
WAVELINE INCORPORATED
Description
(NON-CORE DATA) FLANGE MANUFACTURER PART NUMBER: M3922/53-002
(NON-CORE DATA) FRAGILITY FACTOR: MODERATELY RUGGED
(NON-CORE DATA) TUBING MANUFACTURER PART NUMBER: M85/1-073
CROSS-SECTIONAL SHAPE STYLE: A1 INTERNAL, RECTANGULAR EXTERNAL, RECTANGULAR
FLANGE CONNECTING FACILITY AND QUANTITY: 4 UNTHREADED HOLE ALL FLANGES ALL CONNECTION FACILITIES
FLANGE CONNECTING HOLE DIAMETER: 0.169 INCHES MINIMUM AND 0.172 INCHES MAXIMUM ALL FLANGES ALL CONNECTION FACILITIES
FLANGE DEPTH: 0.423 INCHES MINIMUM AND 0.453 INCHES MAXIMUM ALL FLANGES
FLANGE INSIDE HEIGHT: 0.628 INCHES MINIMUM AND 0.631 INCHES MAXIMUM ALL FLANGES
FLANGE INSIDE WIDTH: 1.253 INCHES MINIMUM AND 1.256 INCHES MAXIMUM ALL FLANGES
FLANGE OUTSIDE HEIGHT: 1.860 INCHES MINIMUM AND 1.890 INCHES MAXIMUM ALL FLANGES
FLANGE OUTSIDE WIDTH: 1.860 INCHES MINIMUM AND 1.890 INCHES MAXIMUM ALL FLANGES
FLANGE QUANTITY: 2
FLANGE STYLE: C28 COVER TYPE ALL FLANGES
FLEXIBILITY: RIGID SINGLE TUBING SEGMENT
III FSC APPLICATION DATA: ANTENNAS,WAVEGUIDES,AND RELATED EQUIPMENT
III PRECIOUS MATERIAL: SILVER
III PRECIOUS MATERIAL AND LOCATION: INTERNAL SURFACES SILVER
MATERIAL: COPPER ALLOY ALL TUBING SEGMENT AND FLANGE
STYLE DESIGNATOR: B1 STRAIGHT TYPE
SURFACE TREATMENT: SILVER ALL TUBING SEGMENT AND FLANGE INSIDE SURFACES PAINT ALL TUBING SEGMENT AND FLANGE OUTSIDE SURFACES
TUBING TWIST ANGLE IN DEG: 90.0 SINGLE TUBING SEGMENT
TUBING TWIST TYPE: STRAIGHT TWIST SINGLE TUBING SEGMENT
TUBING WALL CONSTRUCTION STYLE: J1 SEAMLESS SINGLE TUBING SEGMENT
VOLTAGE STANDING WAVE RATIO: 1.05
WAVEGUIDE INSIDE HEIGHT: 0.493 INCHES MINIMUM AND 0.501 INCHES MAXIMUM
WAVEGUIDE INSIDE WIDTH: 1.118 INCHES MINIMUM AND 1.126 INCHES MAXIMUM
WAVEGUIDE LENGTH: 6.000 INCHES NOMINAL
WAVEGUIDE OUTSIDE HEIGHT: 0.621 INCHES MINIMUM AND 0.629 INCHES MAXIMUM
WAVEGUIDE OUTSIDE WIDTH: 1.246 INCHES MINIMUM AND 1.254 INCHES MAXIMUM
Related Searches:
SM-A-718671-3
WAVEGUIDE ASSEMBLY
NSN, MFG P/N
5985010377352
NSN
5985-01-037-7352
MFG
US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR
Description
(NON-CORE DATA) FLANGE MANUFACTURER PART NUMBER: M3922/53-002
(NON-CORE DATA) FRAGILITY FACTOR: MODERATELY RUGGED
(NON-CORE DATA) TUBING MANUFACTURER PART NUMBER: M85/1-073
CROSS-SECTIONAL SHAPE STYLE: A1 INTERNAL, RECTANGULAR EXTERNAL, RECTANGULAR
FLANGE CONNECTING FACILITY AND QUANTITY: 4 UNTHREADED HOLE ALL FLANGES ALL CONNECTION FACILITIES
FLANGE CONNECTING HOLE DIAMETER: 0.169 INCHES MINIMUM AND 0.172 INCHES MAXIMUM ALL FLANGES ALL CONNECTION FACILITIES
FLANGE DEPTH: 0.423 INCHES MINIMUM AND 0.453 INCHES MAXIMUM ALL FLANGES
FLANGE INSIDE HEIGHT: 0.628 INCHES MINIMUM AND 0.631 INCHES MAXIMUM ALL FLANGES
FLANGE INSIDE WIDTH: 1.253 INCHES MINIMUM AND 1.256 INCHES MAXIMUM ALL FLANGES
FLANGE OUTSIDE HEIGHT: 1.860 INCHES MINIMUM AND 1.890 INCHES MAXIMUM ALL FLANGES
FLANGE OUTSIDE WIDTH: 1.860 INCHES MINIMUM AND 1.890 INCHES MAXIMUM ALL FLANGES
FLANGE QUANTITY: 2
FLANGE STYLE: C28 COVER TYPE ALL FLANGES
FLEXIBILITY: RIGID SINGLE TUBING SEGMENT
III FSC APPLICATION DATA: ANTENNAS,WAVEGUIDES,AND RELATED EQUIPMENT
III PRECIOUS MATERIAL: SILVER
III PRECIOUS MATERIAL AND LOCATION: INTERNAL SURFACES SILVER
MATERIAL: COPPER ALLOY ALL TUBING SEGMENT AND FLANGE
STYLE DESIGNATOR: B1 STRAIGHT TYPE
SURFACE TREATMENT: SILVER ALL TUBING SEGMENT AND FLANGE INSIDE SURFACES PAINT ALL TUBING SEGMENT AND FLANGE OUTSIDE SURFACES
TUBING TWIST ANGLE IN DEG: 90.0 SINGLE TUBING SEGMENT
TUBING TWIST TYPE: STRAIGHT TWIST SINGLE TUBING SEGMENT
TUBING WALL CONSTRUCTION STYLE: J1 SEAMLESS SINGLE TUBING SEGMENT
VOLTAGE STANDING WAVE RATIO: 1.05
WAVEGUIDE INSIDE HEIGHT: 0.493 INCHES MINIMUM AND 0.501 INCHES MAXIMUM
WAVEGUIDE INSIDE WIDTH: 1.118 INCHES MINIMUM AND 1.126 INCHES MAXIMUM
WAVEGUIDE LENGTH: 6.000 INCHES NOMINAL
WAVEGUIDE OUTSIDE HEIGHT: 0.621 INCHES MINIMUM AND 0.629 INCHES MAXIMUM
WAVEGUIDE OUTSIDE WIDTH: 1.246 INCHES MINIMUM AND 1.254 INCHES MAXIMUM
Related Searches:
2359002474-1
WAVEGUIDE ASSEMBLY
NSN, MFG P/N
5985010377353
NSN
5985-01-037-7353
MFG
COMTECH PST CORP. DIV HILL ENGINEERING
Description
(NON-CORE DATA) FLANGE MANUFACTURER PART NUMBER: UG600A/U UG599A/U
(NON-CORE DATA) TUBING MANUFACTURER PART NUMBER: RG96/U
BEND ANGLE IN DEG: 90.0 ALL BENDS H-PLANE
CROSS-SECTIONAL SHAPE STYLE: A1 INTERNAL, RECTANGULAR EXTERNAL, RECTANGULAR
DESIGN CONTROL REFERENCE: 2359002474-1
FLANGE CONNECTING FACILITY AND QUANTITY: 4 THREADED HOLE FIRST FLANGE SINGLE CONNECTION FACILITY 4 UNTHREADED HOLE SECOND FLANGE SINGLE CONNECTION FACILITY
FLANGE CONNECTING HOLE DIAMETER: 0.116 INCHES NOMINAL SECOND FLANGE SINGLE CONNECTION FACILITY
FLANGE DEPTH: 0.210 INCHES NOMINAL FIRST FLANGE 0.187 INCHES NOMINAL SECOND FLANGE
FLANGE INSIDE HEIGHT: 0.140 INCHES NOMINAL FIRST FLANGE 0.222 INCHES NOMINAL SECOND FLANGE
FLANGE INSIDE WIDTH: 0.280 INCHES NOMINAL FIRST FLANGE 0.362 INCHES NOMINAL SECOND FLANGE
FLANGE OUTSIDE HEIGHT: 0.750 INCHES NOMINAL FIRST FLANGE 0.750 INCHES NOMINAL SECOND FLANGE
FLANGE OUTSIDE WIDTH: 0.750 INCHES NOMINAL FIRST FLANGE 0.750 INCHES NOMINAL SECOND FLANGE
FLANGE QUANTITY: 2
FLANGE STYLE: C2 CHOKE TYPE FIRST FLANGE C27 COVER TYPE SECOND FLANGE
FLEXIBILITY: RIGID SINGLE TUBING SEGMENT
MANUFACTURERS CODE: 31196
MATERIAL: COPPER ALLOY ALL FLANGE
NOMINAL THREAD SIZE: 0.112 INCHES FIRST FLANGE SINGLE CONNECTION FACILITY
STYLE DESIGNATOR: B2 BEND TYPE
SURFACE TREATMENT: SILVER ALL FLANGE INSIDE SURFACES GOLD ALL FLANGE OUTSIDE SURFACES
THE MANUFACTURERS DATA:
THREAD CLASS: 2B FIRST FLANGE SINGLE CONNECTION FACILITY
THREAD DIRECTION: RIGHT-HAND FIRST FLANGE SINGLE CONNECTION FACILITY
THREAD SERIES DESIGNATOR: UNC FIRST FLANGE SINGLE CONNECTION FACILITY
TUBING WALL CONSTRUCTION STYLE: J1 SEAMLESS SINGLE TUBING SEGMENT
WAVEGUIDE INSIDE HEIGHT: 0.140 INCHES NOMINAL
WAVEGUIDE INSIDE WIDTH: 0.280 INCHES NOMINAL
WAVEGUIDE LONGER OFFSET DISTANCE: 2.267 INCHES NOMINAL
WAVEGUIDE OFFSET DISTANCE: 1.150 INCHES NOMINAL
WAVEGUIDE OUTSIDE HEIGHT: 0.220 INCHES NOMINAL
WAVEGUIDE OUTSIDE WIDTH: 0.360 INCHES NOMINAL